Hyperlink showing blue underline with white type

I have a website that has two hyperlinks on the home page of my site. The one links to a webpage the other to a downloadable pdf. Both have white type and are supposed to have a white underline. The link that links to the webpage is correct but the one that links to a pdf keeps showing as white type with a blue underline. I have tried copy and pasting from the correct one but as soon as I link to the pdf instead of a hyperlink it goes to a blue underline again. Note it only changes the underline blue.... I can change the type to white again easily. Is this a bug or am I missing something?

Hi,
In the authorization form area, you appear to have two links: a text hyperlink to http://www.therecordsco.com/assets/trc-authorization-form.pdf as well as a text frame hyperlink to https://ipn.intuit.com/pay/TheRecordsCompany. I am guessing the latter was unintentional. Could you select the Authorization Form text frame (not the contained text, but the frame itself), delete this hyperlink and try again?
Thanks,
Abhishek

Similar Messages

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Ive just updated to LR 6 from LR 5.
The app seemed to launch ok but as I was looking around none of my photos will open in the developer module, they just have a blue box with white cross??

It seems to be something to do with Lightroom 6 accessing the GPU. I had this problem and under the "Performance" tab in "Preferences" (Edit menu), there's a box that says "Use graphics processor". I unticked this box and now the images are displayed in the developer module. I'll need to investigate further to find out why Lightroom is not working with my GPU but at least I can use it now.

Overprint issue with white type.

We have been creating Digital PDF successfully for over 10 years. This is a problem that comes along once in a great blue moon.
Please read complete text before forming an opinion or answering the questions. The focus of these questions are on Digital AD's from outside vendors/customers.
We create our publications using Quark 6.5 on Windows XP
(We are locked into this version because of some other proprietary software tied into Quark, so upgrading Quark is not an option for us).
We compose a page of some type, some MAC EPS Illustrator 5.1 files and at least one Digital AD (PDF's which are from our advertisers/customer that we pre-flight) on to the page.
Print the page to a postscript file, distill postscript file with Acrobat Distiller Ver. 7 on PC's into a PDF file with Crops and Registration Marks.
We got a PDF (Digital AD) from a customer that was created in InDesign CS6 on a Mac. There is some white type in the AD ( See Photo Below)
The Last "E" in Engineered is selected in each screen shot.
The Top one is the AD untouched before Pre-flighting it. The White Type "E" letter is set to knock out and is still type (not converted to outlines).
(Pitstop is showing this in the dialog box on the right)
In the Bottom screen shot the type has been converted to outlines and is set to overprint.
First problem is white type should never overprint. Unless you specifically set it to in the original program.
This type was originally set to knockout and then when it was distilled from a Postscript file from Quark into a PDF with "Preserve Overprint Settings" check in (Distiller Settings) the type is converted to outlines and the type was set to overprint.
(If I turn off "Preserve Overprint Settings" and re-distill the postscript file the type doesn't convert to outlines or change to overprint.... it remains a knockout.)
Second Problem is catching this while using preflight tools. I have Pitstop tools to show Overprinting and Acrobat has a Output Preview/Color Warnings/Show Overprinting feature too.
Using Pitstops Overprint does show it in the inspector window, but not a Pitstop report.
Acrobat's Show Overprinting does NOT show that the type has been set to overprint.
So our workflow now is to flag any white type and check it throughout the whole pre-press process to make sure the type holds the knockout function.
Below is a scan of how the type ran when it was printed on sheet feed printing press paper.
Talk about overprinting... this is not what it looked like in the above pictures.
I am aware of this problem from Illustrator. It's an order of operations when dealing with white type.
If you set type, change the color to something other than 100% black and then convert it to outlines... it will knockout.
If you set type, convert to outlines and THEN change the color from black to white, it will hold the overprint from being black type.
It doesn't always do this every time, but it does happen enough that I have to double and triple check my white type.
Questions:
Does anyone have this problem in their workflow (White Type Overprinting) and do you have a solution to better catch this when you have to process 50+ AD's each week?
Obviously anything with white type will be looked at much closer now that this AD got through. It would be nice if these settings would hold through the whole preflight to printed piece process.
Any Words of Wisdom would be appreciated too.

You can set Pitstop up to catch this and even fix it.
In the preflight profile, under 'Text', select 'White Text' and add it to the list of checks, you can also enable the fix as well so it's just resolved.
I'm using PitStop 11 update 2, but it's in earlier versions as well.
If you need futher information you can always drop me a mail. I am the Product Manager for PitStop, [email protected]

How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

How to get rid of the blue underline with green arrows on words and then a pop-up ad appears.

Click here and follow the instructions, or if they don't cover the type of adware on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
(119795)

CS13 ----- will it show only parts with procurement type F ?

Hi,
I have a basc issue
when we execute CS13 it summarises teh BOm and show the Bom component and quantity .
will it show only parts with procurement type F ?
when we execute CS13 for a finished product , its not displaying all the BOM components , the list is displaying only few
what might be the reason
will it show the parts only directly linked to it at the first level ?
regards,
madhu kiran.

Hi,
CS13 shows summarize BOM that mean it leaves out all the intermediate BOMs(sub assemblies) and displays on the end components. End component need not have procurement type F.
It will display End components in the any level.
To simply cross check, in CS12 add colum Assembly indicator and filter only those components having blank value. You will get report displayed as that of CS13.
Regards,
Krishna Mohan

Webdynpro on loading shows a black and white type of screen

Hi Gurus.
Don't know if anyone had this problem before.
Some of your webdynpros on running show a black & white type of screen with no background colors. Buttons are visible, but clicking on them nothing will happen. I don't know if you all understood what I am saying. Unfortunately I cannot attach screen shot
Basically the background becomes all white. No groups in blue color. No table lines.
It happens only intermittently, user refreshes, and it gets okay.
Anyone faced this problem before? If so, any solutions found for it?
Thanks in adv.

Hi Aishi,
the only other time I've seen something like this, has been when I've been messing around with the portal theme (in that particular case I was trying to apply the portal theme to a BSP which had been called dynamically in the app and was not therefore correctly picking up the theme .)
That said - the problem was never intermittent for me then - either it worked or it didn't!
I'd be trying to find a way in which you could replicate the issue, (potentially clear all the cookies local files etc from a user's machine) and then putting a program like HTTPWatch on to check if there were issues picking up any particular files in the user's request.
Cheers,
Chris

Images on certain websites come up blank with little blue box with white "?" inside

I own a MacBook Pro (MAC OS X 10.6.8) that I purchased in 2011. I have never had a single problem before, but here very recently youtube, my school (FSU) website, and a few other random websites will not load images. At all. They just show a little blue box with a white question mark inside. I have tried emptying the catch, resetting safari, nothing works. Help? I need to be able to see the images on my.fsu.edu it's really important!

See this: <br />
https://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show

Blue Box with White Question Mark

All of a sudden, I started receiving the Blue Box with a White Question Mark in my Safari Internet. I test the site with two other browsers and the behavior was the same. I have not plug-ins recently installed and did clean my cache. Any suggestions? Running Mavericks. I ran an Adobe Flash update yesterday, but the behavior is affected today. I reset Safar after runnign Disk Utility<Repair Disk Permissions.

Where precisely do you see the "?"

Safari 7.0 shows blue box with ? instead of actual picture

Hi,
I upgraded my macbook air late 2013 to mavericks and since then, when i open some site like Ebay i dont get to see pictures and i get blue box with ? mark inside.
Any suggestions?!?!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Macbook Pro boot shows black screen with white text cursor

Hello,
I have a MacBook Pro 7,1 MC374xx/A running Mavericks. My box has two internal hard drives in it. One had the Mac OS installed to it, and the other has absolutely nothing on it. I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on. I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart. Then it said, "No boot devices found." Now for whatever reason, it's just a black screen with a white text cursor.
What the heck happened?
I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS). Then, I completely erased everything from the drive with Boot Camp on it. But still..black screen with white text cursor.
I have no Time Machine backups available so I'm forced to reinstall the OS. Any idea why this happened? It seems I must have attempted to install Boot Camp improperly. Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
Earnestly,
Speck

Boot Camp- Windows installation boots to black screen with blinking cursor.

Camera Raw blu image with white x in it. Does not show real image

Does anybody know about this? Just installed Photoshop CC 2014 with Camera Raw and now i do not see the NEF imported image in camera raw?
Do i miss a extra plugin maybe?
thanks for the help

Turn off GPU Acceleration in the CR Preferences. This X happens if ACR gets an error trying to render things using the GPU.

Why iPhone In New Zealand Dosen't Show 3G Badge with white Background

Hey There.
In this pic http://3gweek.net/wp-content/uploads/2008/06/iphone3greal.jpg it shows a pic of the 3G Badge with a background. How come in New Zealand it not Show the background

I think they removed that blue background in an update a while back. I am in the US and the "3G" is blue or white depending on the background of the top information bar. Try searching for a picture of the newest software and it should look like yours.

Move tool "Show transform controls" with a type layer

I just recently figured this "show transform controls" option with the Move Tool and while trying it out, I noticed it works differently with type layers than others.
On regular bitmap layers it moves, resizes and rotates as supposed, but with type layer it jumps to "free transform" -function when trying to do anything with the transform controls. Causing the tool to drop and the anchor points change place (from text outline to text box?).
Is this normal behaviour or is there something I don't get?

Yes, being able to assign shortcuts to UI elements would be a major productivity jump in several cases! I tought that it
was the advantage of the object-oriented programming, but I my coding abilities stop at "20 go to 10"...

Satellite L650-10M shows Blue Screen with Twinhan Azurewave AD-SB200

I have blue screen after starting the satellite card USB ... Twinhan Azurewave AD-SB200
I have Windows 7 Home Premium 64 bit
Satellite card was working on the old PC very nice with Windows XP without any problems
After starting the satellite card with about 5 minutes from working, I become the blue screen and then Restart for Windows
Then, I become this message:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 3073
Additional information about the problem:
BCCode: 3b
BCP1: 00000000C0000005
BCP2: FFFFF80002C8F805
BCP3: FFFFF880089F6AA0
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\083010-14882-01.dmp
C:\Users\TOSHIBA\AppData\Local\Temp\WER-47143-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please I need help fast
Thank You

Is this card designed to run under Windows7?
Do you have installed proper Win7 driver?
Sorry but Toshiba doesnt support third part hardware and software so if you have problem with Toshiba then you are here on the right place. For all other questions contact Azurewave support and ask for help.
Thay have best experience with own product and I hope they can help you to get it work properly.

I have just downloaded iOS update but this has locked my iPad screen. Screen shows iTunes symbol with white arrow and padlock below it. I have tried to reboot but I am unable to unlock screen. Can anyone help with this please.

I have downloaded an iOS update on my iPad air2 but it has locked the screen and I can only see the iTunes symbol with a white arrow and a padlock below it. I have tried turning the iPad off and on but the same screen reappears. Has anyone had a similar problem?

What that symbol indicates is that your iPad has gone into recovery mode and now it needs to be restored in order for you to be able to use it again. You can reboot from now until the cows come home and it will not do any good.
You do indeed need to plug your iPad into your computer and use iTunes to restore the device.
Use iTunes to restore your iOS device to factory settings - Apple Support
Just in case you need to use recovery mode.....
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

Hyperlink showing blue underline with white type

Similar Messages

Maybe you are looking for