I am having trouble sorting out clips.
I cannot seem to isolate a clip. I downloaded an old movie from a vhs format. Now, the entire movie is surrounded by the "yellow" line and I cannot seem to isolate a clip. There is an entire section in the middle of the movie which I would like to remove, but cannot isolate it. What am I doing wrong? I tried to follow the instructions in Help, but it's not "helping".
Hello lorrainefrombluffton,
I hope you are enjoying editing with iMovie. I have located an article that may help you with editing clips:
iMovie (2013): Trim, split, and move clips
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD
Similar Messages
-
My old phone broke and I am having trouble figuring out how to restore my contacts on my "new" phone (LG ENV2 Black). Apparently the phone is so old that I am unable to install Backup Assistant on it, which sucks. I have all my old contacts saved on my computer as a CSV and also another copy on a micro SD as VCF. I have tried moving the CSV from my computer to my ENV2 via both Bluetooth and USB cable, but had no luck with either of those. I also tried to pop the micro SD into the ENV2, and although I can load all my old pictures/videos/etc. from the micro SD, I do not seem to be able to restore the contacts from card. I know there has to be some way to manually transfer these files; the contacts are still on my old phone as well; but I was unable to use the transfer wizard for that because my old phonedoesn't seem to be supported by that (Pantech Jester 2)
Google a program called bitpim, that might do what you want. Never used it but it's been talked about on the forums. Other than that you might have to input them manually. Mary
-
I would like to print a four sided programme, but am having trouble finding out how to organise the sections onto a 17 by 11 paper with the sections in the right order. Any help?
If all you are going to do is print double sided and them make
a single fold reducing the page to 8 1/2 x 11, one side of the
original 17 x 11 page will be page 4 on the left as you hold
the page facing you and page 1 on the right, reverse side
should be printed so top is same as top on the the first side
and will be page 2 to the left and page 3 to the right. Pick
up the double sided document with pages 2 and 3 facing you, fold
left edge to meet right edge; you should now have fold on the left
with page 1 facing up toward you, turn the page as you normally
would and pages 2 & 3 should be in order, and one more turn brings
you to page 4 and the fold should know be on the right. I hope this
explains clearly enough - if not, post back and some one should
join in with a better explanation. -
In the new iOS7, Having trouble figuring out how to forward text messages. Can someone tell me how to do that? Where the forward button. You used to be able to hit forward and put radio button on all the messages. The screen looks blank to me.
In the new iOS7, Having trouble figuring out how to forward text messages. Can someone tell me how to do that? Where the forward button. You used to be able to hit forward and put radio button on all the messages. The screen looks blank to me.
-
Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!
Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original. -
I changed my comcast password (on my phone) and now am having trouble sending out emails from my Mac.
Did you change the password on your Mac as well? Go to Mail / Preferences / Accounts and change it there too.
-
I am having trouble fading out a song at the end of an iMovie. Also, the volume of the song is too high...I would like it to be more background music? I have tried everything and can't figure it out...Can anyone help me, Please!!??
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
I have been thrilled to use file sharing for tv programs downloaded on my home pc. I have not been able to sort the program list on the ipad2 to make the list appear in order of showtime or live appearence. Any suggestions?
I have been thrilled to use file sharing for tv programs downloaded on my home pc. I have not been able to sort the program list on the ipad2 to make the list appear in order of showtime or live appearence. Any suggestions?
-
Hi
I have backed up itunes by copying my itunes file to an external hard drive. I try to keep my large media files (like TV shows) in a separate folder so that I can keep my hard drive on my macbook from filling up. Problem is, apple has changed the way Itunes is organized and backs up over the years. Now I am having a hard time keeping straight what is where. When I go to support, it has different instructions for the various versions of itunes. I am using version 10 now but it seems like I can't see all my files within the itunes music or media folder. I want to get everything in one place so that I can easily back up, regardless of which version of itunes I am running at the time.
I have selected to let itunes organize my files. It keeps all the files I have purchased in one place apparently, but items I have imported don't seem to always be there.
How can I best sort this out?I have, but if I don't have that particular external hard drive connected when my time machine backup hard drive is connected, then I don't think it is all backed up together. It is getting too complicated to get out all this equipment every time I want to buy some music.
-
Is any one having trouble filling out a form on safari with lion?
Can't click on a text field and type. I have safari and lion!
Help Please!Hello turboprob! I am sorry to hear of the trouble you are having with your phone! I certainly want you to have a phone you are happy with. I actually have the Turbo myself and with the most recent software update the voice & data has been running smoothly ever since. This link has all the benefits of the most recent update http://vz.to/1DZb6YH. Additionallly this link tells how to do the update, just in case you need it http://vz.to/1DZboyU . Let me know how this works out for you!
bryans_vzw
Follow us at Twitter @vzwsupport -
Having trouble with audio clips in FCP
I have a project which involves using a number of short audio .wav clips stacked up with a video clip - lots of sounds to go with a SPFX-heavy project.
Problem is - I can hear a 'popping' noise at the start of the .wav clips. In some short portions of the project this is really annoying because you can hear 2-3 pops in rapid succession as one wav file comes in after another.
I've brought the files into Soundtrack Pro and there is no popping sound to clean up in the individual audio files.
It anyone else having a problem like this? Is it unavoidable?Yes, it is a common problem with digital audio files. I believe it is known as DV Offset, or some such. You can search for POP and find many discussions here and on other FCP forums. We see the topic weekly at least. The most common solution is to place a 1 or 2 frame fade at the beginning of the clip.
This is not necessarily a problem with FCP, it's digital audio, that's just kinda how it is.
bogiesan -
I am having trouble rendering cropped clips.
I am getting a "Out of Memory" error. I have the same clip overlayed on top of another, and have the top clip cropped. The bottom clip is at a lower opacity. When I try to render that section, it gives me a "Out of Memory" error. Both clips are the same - a RAW photo that is RGB at 8 bit.
You need to go to your settings and up the amount of ram used by FCP for stills.
Go to Final Cuts System Settings then in the Memory and Cache Tab bring up the Still Cache to something closer to 50%.That should be it.
Pi -
My emails wont go out . I believe I have my server settings wrong but cant seem to correct them . Can anyone help me with this problem ?
incoming and outgoing mail servers settings have to be correct to send.
cheers,
Jack -
I am having trouble figuring out how to get a date to show on a report
Hi,
I have a query with a structure on both my rows and columns.
In my columns, I have my key figures and on them are period/year restrictions. For example, the first column is the current fiscal period/year - 1 period, the next column is the current fiscal period/year - 13 periods (so I can compare this year to last year)
On my rows, I have a structure that is listing sales where on each line, I am restricting by groups of accounts.
What I need on my report is a header stating what the time period of the report is for. That is, the restriction of the current fiscal period/year -1 that is being placed on the first column also needs to be up in the page heading.
This is going to be hard to explain but here goes. My columns are reporting key figures constrained by time.
<page header>
REPORT: XXXXXX
REPORTING FOR: Per/Yer (Which is equal to the date restriction that is on the first KF column, that is curr yr/period - 1 period)
<report body>
SALES GROUP / RPT MONTH / LY
Mens / amount (restricted to curr year/period - 1) / amount (restricted to curr year/period - 13)
Womens / amount (-1) / amount (-13)
Childrens / amount (-1) / amount (-13)
I tired adding it to my row structure but since my KFs are constrained by per/year, I can not drop per/year onto my rows.
I tried to add a column showing time but BEx wants me to add a key figure (since the columns have key figures in them) so that does not work either.
How can I get the value of "current period/year - 1 period" to be part of the data (not a label) in the query so that I can put it into a header on my report.
Thanks for your help!Hi,
Click on Query Property,
In General tab of Query Property, select New variable at Discreption.
Give Discription and technical name. Select Processing type Replacement path. select Reference Characteristic year/period. In replacement path tab, Select variiable with- Variable and Select your variable(which will give you previous fiscal year/ period- already exist or you have to create to get previous fiscal year period) and select Replace with - Label. Assign this variable in your query discreption -
Having trouble finding out why i get "cannot find symbol variable textio"
Im trying to write a romanNumeral converter program.
I dont know what else im doing wrong!
Please help me to see and understand what i did wrong!Please help me to see and understand what i did wrong!You are using something called 'textio'
The compiler doesn't know what that is.
It is telling you exactly that.
Maybe you are looking for
-
G/L Account period balance report
I am asked to prepare detail report similar to transaction code FAGLB03. i have to use 'BAPI_GL_GETGLACCPERIODBALANCES' FM in my report.I am using bkpf, bseg table. A/cNO-PSWBT1-PSWBT2-PSWBT3-TOTAL-AS PER LEDGER 000001-0001000-0002000-0000000-000030
-
Why is the security "lock" always open in (Network) System Preferences?
(+This may not be the correct forum, but here it goes anyway+) I have a "1st Gen" iMac G5 (so, a PowerPC), running Tiger, 10.4.11 On the rare occasions that I open the Network options in the "System Preferences", I see that the "lock" at the bottom l
-
How can I downgrade my ipod touch 2g from 4.2.1 to 3.1.3?
I have an iPod touch 2g and I cannot even express how slow it has gotten after upgrading it to the iOS 4.0 software. Please help me I do not plan on jail breaking this device. I just want to downgrade for the speed.
-
PSE 7: Maintaining correction settings from one picture to another
I have a batch of pictures from a project that were all taken at the same time, in the same light and conditions, but from different views. I have "Fixed" one of the pictures to where it looks the way I want it. Now, I'd like to apply the same settin
-
My library is still intact, however, my thumbnails are appearing as a white box with a gray dotted line. If I click on the box to open them, then they are there. I took my computer into an Apple store 2 days ago, they reset the computer and it was wo