I can no longer access internet on my iphone.

When I try to access internet on safari or any apps requiring internet the apple icon spins and says loading but never loads. I have tried reseting phone to factory setting but still can not access internet. I re-downloaded apps to phone using itunes sync, and kids can play apps fine, but not if internet access required. Safari still does same also.

What about wifi?
If you're attemtping on 3G, talk to your provider. There's not much else available for troubleshooting.

Similar Messages

Can no longer access internet on Wifi, 3g works fine

For some reason, my iPhone 4 has stopped getting internet access when on wi fi. It gets on the network fine, and all other devices have no problem with this wi-fi connection (Airport Extreme). The phone gets on the web fine w/3G. I've reset everthing, and even restore the phone's software. Weird. HAve reset, restored, etc. Any Ideas?

on the iPhone, go into settings>wifi, then click on your wifi network. Go to "dns" and replace whatever is there with the numbers "8.8.8.8"
If that doesn't work, there may be something going on with your Airport.Reset the Airport to factory settings and reset it up

Can no longer access blueyonder emails on iphone.I get the following error message: The mail server 'imap4.blueyonder.co.uk is not responding', how do I fix pls?

Hi there
As I've mentioned above, I can't seem to access my emails from my blueyonder account on my iphone. When I first set up my account on the phone, I had no problems at all receiving emails. Then recently, just out of the blue I get the following error message: 'Cannot Get Mail, The Mail Server 'imap4.blueyonder.co.uk' is not responding. Verfiy that you have entered the correct account info in mail settings. I definitely have the right settings, I even checked with Virgin but they are not able to assist with my problem. Has anyone else experienced this problem, if so,how did you fix it? If you could explain in simple terms as I'm not tech savvy!
Many thanks!

http://www.apple.com/uk/support/iphone/mail/
work through this

TS3899 After changing my gmail password from my laptop, I can no longer access gmail on my iPhone.

I've entered my new password many times and exchange tells each time that either my account name or password is incorrect. I deleted my account from exchange and re-set it up, no help. I rebooted the phone, no help. Gmail works just fine on my laptop. Please help.
IPhone 4s, iOS7.1

Sounds like you restored your phone as new. If you follow all the steps, there a section that allows you to restore from a backup either through icloud or itunes.
You do have a backup of your phone right? If you don't then all is gone, but you can sync back your apps and music.

I installed 7.1.2 update for my iphone5 and I have problems. I can no longer access the internet on my phone. My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet. I've dis some searching for a solution, but nothing works. What has this happened? And how can I fix it?

LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
If your Wi-Fi is working, then you should be able to access the internet.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
* No data is lost due to a reset
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

Can no longer access royalgames on internet

how come i can no longer access royalgames.com on internet

Hi orangekay
not sure where you got the idea that I have
bizarre encrypted filesystem plugins and scripts you have manipulating them all the time
because I do not have any such running, just normal Applescripts that do tasks that could be done by hand.

I can no longer access the web on my IPod Touch through my home wifi network.

I have an I Pod Touch with operating system 4.2.1. It has worked fine the past year plus. Suddenly, I can no longer access webpages on it. When try to load a website, looks like it is trying to open the page, but it never fully loads and times out. My I Pod indicates that it recognizes my wifi network and I have tried resetting both my I Pod and my router. Weirder yet, I can access my Yahoo email on my I Pod and if there is a website link embedded in an email message, i can open it and access the page that way. Any link on the web page opened through my email however does not work. My home computer, which is on the same wifi network, is working fine. The only thing that did occur recently was a power outage.
Please help - this is very frustrating.

LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
If your Wi-Fi is working, then you should be able to access the internet.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
* No data is lost due to a reset
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

Can no longer access Graphite Base Station, Please help

For no apparent reason, my DP 800,10.4.11 can no longer access my Graphite Base Station. For years I have had no problems.
But this morning I lost access to my base station. I entered the PW as usual, but it did not allow access. I verified the PW in Keychain (and the base station name), but again I struck out. The machine is otherwise fine (or so it seems).
I have done the following, all unsuccessfully:
• Shut down with cold restart
• Zapped PRAM
• Safe Booted
• Created a new account/User
• Ran DiskWarrior
• Rebooted Base Station
• Reverted to a week old backup, still no joy.
I can successfully connect to the base station with my iMac, so I am certain the base station works.
I know nothing about this stuff, but it now seems the problem is with the Airport card inside the DP 800. Is this likely?
What if anything else can I do to either isolate the problem, or better yet, fix the problem?

Some things to try:
Create a new Location in System Preferences > Network. (Start from scratch; don't do it by modifying an existing Location.)
Turn off WEP encryption on the base station.
Physically move the base station and/or computer to overcome possible wireless interference in the original position. (Note: the base station does not need to be connected to the Internet while you test wireless connectivity.) You can also try enabling Interference Robustness (on both the computer and base station) and changing the wireless channel.
See whether the DP 800 can connect to a different wireless network.
I'm somewhat surprised you say you entered the password "as usual." Under the typical settings, your computer would remember your network and its password and join it automatically. (I know you haven't declined to store the password in the Keychain.) Moreover, your reference to the "base station name" strikes me as odd, as you do not need to know the base station name in order to connect to the network. Did you mean the wireless network name? Or might the password you have been entering be the base station password, instead of the wireless network password?

Can no longer access Netgear Router

We have been using a Netgear MR 314 router for years for both Wireless and Ethernet wired activity on our G4, G5 and MacBooks. We recently upgraded to Safari 4.0.1 on all 3 machines. Internet, file sharing, screen sharing, home networking all work just fine.
What mystifies me is that I can no longer access router data (192.168.0.1 + password) to do whatever on any of the machines with Safari 4.0.1. I click the tabs on the router (Wizard, Advanced, Maintenance) and nothing happens beyond the 'Welcome' screen. In order to get access to the router I have to use a Dell XP machine. Then I can get into the router with no problem. It's not a big deal, but any ideas?
Yes, yes - all of the MAC ID's for all computers and wireless adapters are still in the router configuration table as tested today with the Dell. So, again, any ideas ??
Thanks

From what you describe, it seems that Netgear deliberately chose to make their web-based management system for their routers focused on Windoze and it's browsers, so either they're using non-compliant HTML, or they're browser sniffing and rejecting anything that isn't IE or Firefox on Windoze. You should complaint to them and let them know how upset you are. There's really no excuse for that, especially since they don't disclose it prior to or after you buy it, and it just shows how lazy they really are when designing these systems.
You should open Safari's Preferences>Advanced window and enable the Debug menu, then go to that menu on the menu bar and use the User Agent sub-menu to select a different browser (Firefox for Windoze) and see if that will give you access again.

Can no longer access a website - why?

As of yesterday, I can no longer access the local school district's website. Says it cannot connect with the website. I've called around and everyone else seems able to connect, so the site is not down. We've got FIOS - have had it for a long, long time - and none of our equipment or situations have changed. No computer in this house - not our PCs or the Macs - can log onto the site. Help!

that's slightly different than the original poster's issue. you're issue has to deal with secure websites.
You may want to follow the instructions here.
If you get the "page cannot be displayed" then I'm afraid you can't access SSL sites.
An example of this picture can be found here!
Here are the steps that you should try to fix your "secure sites problem".
Verify that Internet Explorer Is Using 128-Bit Encryption:
In Internet Explorer, on the Help menu, click About Internet Explorer
The level of encryption on your computer appears next to the words Cipher Strength.
Verify that the Cipher Strength value appears as 128-bit
If the Cipher Strength is anything less then 128-bit, download the "Explorer Internet High Encryption Pack" to your computer's hard disk, and then install it.
Delete Temporary Internet Files
There's also a possibility of some corrupted files in your Temporary Internet Files (TIF) storage. You should clear these
In Internet Explorer, on the Tools menu, click Internet Options, and select the General tab
Under Temporary Internet files, click Delete Files, and click OK when you are prompted to confirm the deletion
Configure Security settings for the Trusted sites zone in Internet Explorer:
In Internet Explorer, on the Tools menu, click Internet Options, and select the Security tab
Select Trusted sites, and then click Default Level
Add the secure Web site you are trying to access to the Trusted sites zone. To do so, click Sites, type the address (URL) of the site in the Add this Web site to the zone box
Click Add, click OK, and then click Apply
Clear the Secure Sockets Layer (SSL) slate and AutoComplete history:
In Internet Explorer, on the Tools menu, click Internet Options, and select the Content tab
Under Certificates, click Clear SSL State
Click OK when you receive the message that the SSL cache was successfully cleared
Under Personal information, click AutoComplete
Under Clear AutoComplete history, click Clear Forms. Click OK when you are prompted to confirm the operation.
Verify that Internet Explorer is configured to use SSL 2.0 and SSL 3.0
In Internet Explorer, click on the Tools menu, click Internet Options, and select the Advanced tab
In the Settings box, under the Security header, click to select the Use SSL 2.0 and Use SSL 3.0 check boxes (if they are not already selected), and then click OK
Verify that the Date and Time Settings on Your Computer Are Correct:
Because SSL certificates have an expiration date, if the date on your computer isn't correct, it may prevent you from connecting to secure sites.
To verify that your computer is configured with the correct date and time settings
Click Start > click Control Panel
Click Date, Time, Language, and Regional Options, and then click Date and Time
Select the Date & Time tab
Check to make sure that the date and time settings are configured to use the current date and time, and then click OK
Check the file integrity of the IE and Outlook:
Click Start>Run> "sfc /scannow" (without quotes) It might ask for the Windows CD to upload the corrupted files
Click Start>Run> regsvr32 softpub.dll (without quotes) and wait for the OK message; then try again.
Here are some Microsoft Knowledge Base articles dealing with this problem that you may like to look at if you aren't able to solve the problem. Just Google the error number and you should find some additional info on it!
261328 - Cipher Strength Appears as 0-Bit in Internet Explorer
301803- Error Message When You Try to Connect to Secure Site: Client Certificate Has Expired or Is Not Yet Valid
303807- "The Page Cannot Be Displayed" Error Message When You Try to View Web Page on a Secure Web Site
305217- Page Cannot Be Displayed Error During SSL 3.0 Server Session Timeout
811383- Internet Explorer Connectivity and Certificate Display Issues
813951- You Cannot Access Your MSN E-mail Account or Authenticate with a Web Site in Various Programs
821814- You Receive a "Page Cannot Be Displayed" Error Message When You Post to a Site That Requires Authentication
Hope this helps,

I can no longer access foxfire on my computer

I can no longer access firefox on my computer

Linda ...
Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

WRT54G2 - can no longer access router webpage after changing setting

hello i've started gaming again so i ended up configuring a static IP using the network and sharing centre in the control panel and i'm online with the fixed IP, and i had some ports forwarded in my router web page and everything has been working great the past 2 days. however, earlier this morning i could not join any games all of a sudden even tho i played 1 when i just got up, so i went to my router home page and changed a setting, i'll link a screen shot, i'm pretty sure i just changed the local IP address from 192.168.1.1 to 192.168.1.10 (which is what i set it as 2 days ago in the control panel network tcp ip4 thing) it's possible i modified somethin in the dchp server section but i was nearly convinced that was disabled anyways. http://screenshots.portforward.com/routers/Linksys/WRT54G2/Basic_Setup.htm is the link if it helps
anyways like the thread title says, i can no longer access the router web page which was 192.168.1.1, instead all i see is a sickening image about something called internet information services!? talk about a weird thing to see when i expected to see my router web page. but it's related to microsoft so it's not malacious at least. any ideas on how i fked up so bad and how to fix it, so i can see the router web page again, and edit the settings back to the way it was this morning

I can't access either and c ant get a connection plugging in my laptop I got a new modem and I'm trying to configure my modem to my wrt54g2 and lost
Hi randallel, you may have to do a hard reset before reconfiguring your router with the new modem. To do the proper reset, please press down the reset button for 30 seconds while the power is on. Release the button and unplug the device. Plug it back in and reinstall the settings based on the type of Internet connection that you have. Hope this helps.

Macbook pro can no longer access windows file share. 'This file server is available on your computer'

Hi all,
We have a consultant who uses a macbook pro to access the internet and a windows share within our network. He has been accessing the internet and the windows share fine for over 4 weeks and overnight he can no longer access the internet or this windows share. I have got the error down to a specific windows share which is actually a share on a DC hence the loss of internet. When this user plugs in via ethernet he can view all network locations as expected and can access everyone succesfully bar this specific one. Everytime he tries to access this share he gets the following error: 'This file server is available on your computer. Access the volumes and files locally'. I have another macbook pro that can successfully access this share.
I have tried renewing leases, browsing the network in finder, using 'cmd + k' all produce the same message.
The user is running Mountain Lion
Any ideas?
Adam

Find and delete the ~/Library/Preferences/com.apple.sidebarlists.plist file. This is what keeps track of all your current server share mounts. Maybe the file is corrupt or something. Once you delete it, reboot the machine and then try again. Don't empty the trash until you're sure everything works after the reboot.

Following iTunes update on my computer, I can no longer access or sync my ATV.

After installing the new version of iTunes, I can no longer access or sync my ATV. Any help would be greatly appreciated.

Do the following settings for X-Box...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave Username blank & in Password use admin in lower case...
On the set-up tab change the MTU Size to 1365 and click Save Settings...
Click on "Administration" tab and disable UPnP and click Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

I can no longer access internet on my iphone.

Similar Messages

Maybe you are looking for