I can no longer hear alerts coming through unless my headphones are on due to the phone dropping in liquid which wasnt much to cover the phone. please help.

please help

Not sure what help you think the other users here can offer. You obviously water-damaged your phone.
You have a few options:
1) do nothing
2) purchase a new phone
3) bring your phone and $149.00 to Apple for an out of warranty exchange
4) find a 3rd party iPhone repair shop

Similar Messages

IPhone 5c IOS7.0.3, other people can no longer hear me during calls unless I tap into speaker mode and back?

Hi,
I'm currently using an iPhone 4S, but my partner has just bought an iPhone 5c. A while ago, before the IOS7 upgrade, my phone would for some reason act as if I had clicked mute during calls. Nobody would hear me, but I could hear them perfectly. The only fixes were to hang up and recall them back, or to switch it to speaker mode and back again. Very annoying. However, after updating my IOS, it suddenly stopped doing this. It was fixed, I was happy, game on.
But recently, my partners phone which was working perfectly fine before the new IOS7.0.3 update, has developed this problem. Exact same issue, exact same solution. I wouldn't mind so much, but shes bought this phone in the last month, its a brand new phone, new software, new model... It shouldn't still be doing this! Whats worse is that when driving, its very dangerous for her to have to keep switching between speaker and not just to get her phone working. (She drivers with the phone in a cradle with hands free on).
This issue is... Annoying. I've found that its not exactly a rare thing, and that a lot of people have had it for quite a while, but the only solution I've seen is to open the back of your phone and cover a certain part with paper/cardboard... Not exactly what we want to do is it.
Does anybody have any advice or a solution to this, as I'm going a little crazy trying to reset everything and fix it!
Thanks in advance!

Same issues here. Sometimes during outgoing calls, people cannot hear me at all, even when the signal strength is good. Only solution is to soft reset the phone. A couple of times the person could hear me for the first few seconds of the call then it dropped completely.
I also experience the issue with the 3G data as you described (I think they are related... i.e., when the 3G data isn't working, the issues with outgoing calls exists too). The phone will just randomly seem to lose it's internet connection, even with full signal strength. Soft reset/toggling airplane mode fixes this.
I called Apple support; they asked if I was covering the microphone during outgoing calls (as if I'm that stupid). Come on Apple, I have a University degree in Computer Engineering, don't insult my intelligence! They then asked me to restore the phone (which I already did). Next solution they offered me was to replace the phone by sending me a new one first (at a cost of $35), or I could send it back and be phoneless for a week while they send a new one (which is not an option for me). I also put on a $30 Invisibile Sheild so if I exchange it, I already lose that. I believe the issue is not with the hardware, since the microphone seems to work just fine. Given that it is intermittent like this, it seems there's a software/firmware error somewhere that gets the phone into a bad state.
Very disappointed that the $800 phone I just bought functions worse for phone calls than the Nokia brick I had 8 years ago.
If anyone has a permanent solution for this that doesn't involve exchanging the phone, please let me know.

After updating old Touch to 3.1.3, can no longer hear on Bose Sounddock. How can I update to an earlier version?

After updating old ipod touch to 3.1.3, can no longer hear it on old Bose Sounddock. How can I reverse-update to an older version? Or, is there something else I can do? I can hear the ipod on earbuds, but not on the sounddock.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

Since my last GarageBand update I can no longer hear the different software amps and effects while I am playing , but they can be heard when I play back the recording

So I can no longer hear the sofware amp/effects while I'm playing my guitar , but I can hear the software amps/effects during playback after I have done a recording . What's up ? This has happened after my last GarageBand update . I'm using an Apogee Duet .
Bryan

I am monitoring through my KRK 8's. I have changed nothing other than the update . I used to be able to hear all of the amps/effects real time , but now it is only after the recording is done and I play it back that I can I hear the amp/effects that I selected for the recording .

Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

Hi-I have an old Adobe Audition 1.5 and I used to be able to hear as I was recording. After updating computer and reloading Adobe Audition 1.5, can no longer hear as recording but only on playback. Please advise.

All the monitoring is done through your sound device, not Audition. When you updated your PC, the sound device playback settings would have been reset. One of them includes input socket monitoring, and it's this that you need to reinstate. Since we don't know what sound device you are using, that's as much as we can tell you, except that if it's an internal device, you'll need to open the volume control options and alter it there. This varies between OS versions though...

I can no longer access Bejeweled Blitz through my facebook account. I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". Help please.

I can no longer access Bejeweled Blitz through facebook. I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

Contact FB or use another browser.

TS4449 I can no longer hear music on my iPhone unless I use an ear piece could you please help

For a couple of days now I can no longer hear music (or if I play a video with audio) unless I connect an ear piece. I can't find anything in setting that turns this feature on or off unless I have some hardware problem. Help?

Try your volume buttons, if the slider does not show, then there is a short in the iPhone charging port. Clean charging port with toothbrush and small amount of isopropyl alcohol. If still problem the replacement part is iPhone charging port with flex cable, lower mic, and home button flex connector, all a single less than $10 part. Apple handles this problem with Warranty or AppleCare with Replacement iPhone 4S, if no coverage it will cost $199 for replacement iPhone 4S.

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
Cheers
Guy

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

I can no longer view my photos through th photo icon. There is not an icon on my "slide to unlock" screen that when touched starts a slide show of my photos. How do I turn that off so I can access my photos as before?

Oroilore-
I do not see a way to disable the Picture Frame icon. I looked at Settings-Picture Frame, but none of the options turns it off. The only way I can thinik of, would be if all of your photos had been deleted. If there were no photos, you couldn't have a slide show!
One thing to try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

I placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

i placed my ipad on top of my CPU with a music playing,i heard a crack on the sound and when i checked it,i can no longer hear a sound playing on my ipad.i tried to check place a headphone its still playing a sound but when i pull it out,wont play at all.

I don't know if this will work but it's worth a try. I wonder if somehow you ended up with a short inside of your iPad. Give the things below are trying to see if that helps. Good luck.
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\

I've recently reformatted my computer, installed the Audigy 2 software, and installed Adobe Audition. Using Line In 2 on the front of my pc, I was able to plug in a guitar, and hear the guitar via headphones. I can use the remote's record button to instantly start recording, with no problems. I can also play audio using Itunes.
When I opened Audition, I immediately received errors saying that my audio device was not configured or whatever, and that I needed to select an audio device. So I went into the Audition settings, chose Soundblaster Audigy 2 [xxxx], specified Line In 2 for the input, applied and exited. Now I can no longer hear the input from my guitar at all, whether in Audition or not. I'm not sure what setting it might have changed on my pc, but any help would be great.

ntel352 wrote:
i opened Surround Mixer, clicked on the red plus (right over Master Volume), only option was "Digital Output Only", nothing else. Installed the latest drivers & software from creative, now I can't hear the guitar input at all. If I play the guitar and record in Audition, i can see the sound levels being elevated, but hear nothing whether in audition or not.
Other audio plays fine.
Audio is not muted for line in 2, line in 2 is selected in recording screen, line in 2 playback volume is not muted, yet somehow I can hear nothing from line in 2, and i don't have to be recording a single thing... It just doesn't play back.
I dunno what's going on, I haven't been messing with the settings or anything...Message Edited by intel352 on 01-27-2006 06:08 PM
Set 1st your .REC to AnalogMix(...) and then select this '+' sign --> untag the option like picture shows.
jutapa

Can no longer sync aperture events through iTunes to ipad3

I can no longer sync aperture events through iTunes with ipad3. Mavericks/Aperture 3.5.1/ IOS 7.0.4
Have tried deleting Iphoto cache from Aperture Library.
Worked once.
Itunes will sync a folder of images onto Ipad with sync.
But will no longer extract events from Aperture library.
Was hoping tonights Aperture fix grade in conjunction with IOS upgrade would repair issue.
No luck. Help?

I have the same problem with my ipod nano. I downloaded tunes from my old pc. ITunes does not recognise it from my new pc and I cannot sync.

Why can I only hear my calls through the speaker?

Why can I only hear my calls through the speaker?

Because your receiver may not be working anymore. Use http://support.apple.com/kb/TS1630 to troubleshoot this

Can no longer hear any sound on my Hp mini

I think i may have deleted something by accident and i can no longer hear any notififcation noises or anything

Hello Bossman16,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have accidentally removed a software component from your notebook, and I would be happy to assist you in this matter!
To restore the sound on your computer prior to removing a file, I recommend following this document on Using Microsoft System Restore (Windows 7) or for (Windows 8). This should help return your system back to a restore point when your computer was able to successfully produce sound.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

When I edit a midi track and dig on a note, I can no longer hear it. Has something been turned off?

If "digging" is "clicking" and if you mean to ask if anyone can hazard a guess as to what is going on in your particular version of Logic, then I'd say this little button
is not green anymore.

I can no longer hear alerts coming through unless my headphones are on due to the phone dropping in liquid which wasnt much to cover the phone. please help.

Similar Messages

Maybe you are looking for