I can not connect via SSH to a MacBook (the internal home network)

Hi all! There is an internal home network of three computers and Wi-Fi router. On the router and the computers with Win7 via SSH I go (with a MacBook) without problems, but on a MacBook with any other computer can not enter via SSH. What could be wrong?

ssh -v -v -v [email protected]
Do this once for a working system,
And once for a broken system.
Compare the output and see what is says where the broken system changes radically from the working system.
Also on the destination system look in the /var/log/secure.log file for sshd entries to see if the destination system is rejecting your connection and for what reason.
It is possible on the destination system to get even more information by changing the /etc/sshd_config file entry
#LogLevel INFO
to
LogLevel DEBUG3
then issue the command
sudo kill -HUP `/var/run/sshd.pid` # reload sshd configuration parameters

Similar Messages

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

I have an ipad2 and we purchased an HP office jet 6600. I can not connect to print. In searching the net, I have been advised to get the firmware update but can not find it. Can you advise?

Is the HP on the airprint list?
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

I can not connect to a web site at office, but home can

I can not connect to a cfml web site at office, but home can...well I copied ste file from home to office but didn't work, well?

If it's in an office that you are having trouble connecting I would highly recommend consulting with your IT department in the office to ensure that they are not blocking the connection with the corporate firewall.

In e mail can not connect to server i fill out the info and get this

when i try to get e mail i get "you can configure e mail in just a few steps" when i follow the directions i get"can not connect to server"? thanks

On another note Im just checking the external and internal web server names on my server just to be sure that its not an internal server issue - here is the weblink I have been going through - I will test and let you know .
Mac Mail is set to auto discover the settings http://premnair.wordpress.com/2010/07/03/configure-ews-autodiscover-owa-oab-ecp- on-exchange-server-2010/

2 iPads, but can only connect one iPad at a time to my home network. Is this a known issue with Mac/iPads in general?

At home I have a HP PC, netbook and Sony laptop with no connection issues. Last year I bought an iPad 1 for my wife. This year I bought an iPad 2 for myself. However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet. if the iPad1 is being used then the iPad2 cannot connect. I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday. Right now the only iPad that shows any connection is the iPad1. The iPad2 does not see the home network or any other outside network. Any suggestions or ideas on how to resolve this? It is odd the network issues only affect the iPad's.

@dananova,
It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses.
Check the router manual on how to change the dynamic IP range of your router. If you don't have a manual, you can go to Belkin's website and download it.
To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network. DHCP should be highlighted. Write down the all the settings on the screen. Next tap the Static button. Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address. Enter a new 3 digit number in this spot. Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255. I would suggest a range of 240 to 250, unless the original IP range falls near this range. Also make sure you use a different 3 digits for each device you set to use a static IP address.

4150L - Works on web, but can not connect via VPN or Remote Desktop

Recently purchased a 4150L and installed the latest firmware. We have been able to access all public websites without any problems. But, when we try and access our customers computers via VPN (various types) or Remote Desktop, we can't connect. We can sign-in to VPN, but when we try and access the computer, it says "can't connect". Exact same message with Remote Desktop. We are able to connet when use a Verizon phone as a hotspot and from every other internet service that we have tried (i.e. hotels, starbucks, etc.) It appears it is an issue with the 4150L.
Verizon Tech Support has been no help!
All ideas are appreciated!
Thanks,
Skip

Skip,
VPN traffic should be allowed through on the MiFi 4510L by default. I know I do not have any issues with mine on either the Cisco IPSec or Cisco SSL VPN Clients.
If Verizon DNS is interferring then perhaps you could try to connect to your VPN via a direct IP Address instead of a URL. Not sure what VPN client you have but there should be a No DNS option to connect if you know the correct IP. You could also try switching your DNS to one of the free ones such as the one offered by Google or any of the others.
VPN's carry alot of overhead on existing connections in my experience. Its not untypical to have a 3G connection cut in half when a VPN is applied. Try running a speed test to make sure your connection is atleast 1 MB on download before initiating a connection. If the performance of the MiFi is too poor in that area it may never be stable enough to support a connection. Feel free to post some Speedtest.net averages so we can see what you are working with.
Something to note about the MiFi 4510L is that it is on the SIM card network. That means that NAT is always going to be an issue and block your users from providing a truely public IP Address. Directly remoting to them through any means will be nearly impossible.

Can not connect to printer and internet at the same time

I use my airport to connect to the internet via the ethernet port. Internet was working fine until I connected my printer to airport via its USB port. Now the printer works fine but I can't connect to the internet using the same connection.
I can still connect to the same server using its wireless service, but I have to keep hitting the drop down list in the menu bar to select that connection. Can't I just keep connected to the same connection without having to switch back and forth? I thought these mac products were supposed to be all user friendly... I don't have time for this.

The only way to print and use the internet (or university network) at the same time is to do one of the following:
(1) Connect the printer via USB to your computer.
(2) Connect the AirPort Extreme base station (AEBS) via Ethernet to the university's network and then configure the AEBS to act as a bridge (not sharing a single IP address).
The AEBS can NOT wirelessly join the network.

Can't Connect Via Ethernet on new MacBook Pro

Hello,
I'm running into a frustrating problem and hoping someone can help.
I have a new MacBook Pro that won't connect via Ethernet. My old computer (Powerbook G4) with the same settings works flawlessly.
Details: under Network Settings I have Automatic/Using DHCP. When I click on Assist Me>Diagnostics, I get green lights all the way down (Built-In Ethernet, Network Settings, ISP, Internet, Server). The Diagnostics tool therefore proudly announces that my Internet connection is working correctly.
When I open Safari, however, it won't open any page. Using Ping I also get no responses.
When I plug the exact same ethernet cable into my Powerbook G4, everything works flawlessly. The only difference is that the IP address ends in .25 instead of .30 (I assume that's from the router assigning different IP addresses to the two computers.)
On another forum i read about someone having a problem with a long/lossy ethernet cable, but I just took my computer to the router and tried with a 2-foot ethernet cable. Same situation.
Help!
Thanks

i rebooted the firewall and it worked.

Can not connect to one other mac in in-house Ethernet network 10.9.2

I have a small inhouse ethernet network with 3 Macs
All mac´s are running under 10.9.2
On my main mac I see both other macs as approved. When I select the first mac, put in my user ID and password I can connect.
The other mac will not connect; "connection failed" and I see on the console:
27.02.14 15:13:38,186 NetAuthSysAgent[243]: RPC to srvsrvc gave error 0x16c9a042
27.02.14 15:13:38,187 sharingd[212]: SDSharePointBrowser::handleEnumerateCallBack returned -6600
Up to today both connection were working fine; but today I updated to 10.9.2 - but I am not sure if that coused the problem.
Has one any suggestion?
Thanks
Hans

In the meantime I have reinstalled OSX 10.9.2; repaired permisions - no effect.
The settings on both other macs are the same.
No suggestions????

Can I connect use 2 airport extremes in an in home network, each at a different ethernet access point?

Can I use 2 airport extremes in the same in home network, each at a different ethernet drop point?

Hi - without knowing anything else about the network and assuming that you mean that they are connected via ethernet to the main router, the answer is yes - they would be configured in bridge mode to "Create a Wireless Network" (because they are hardwired) with the same name and password as the home network.

Can not connect one of my laptop to the wireless router i just bought

i just boughta wireless n router (WRT120N) from target. I get home and set it up no problem. I try my wifes laptop, which is new and has windows 7, it works good. I get to my older computer that has windows xp and it says, "windows is unable to connect to selected network. the network may no longer be in range." I am in dyin need wat am i suppose to do.
Message Edited by kevinfolse on 03-10-2010 08:50 PM

Try to change the wireless channel on the router and check..Also on the computer,delete all the preferred network and then,try to connect.

HT3819 Why can't we transfer songs between computers on the same home network? None of the threads on the support page have worked!

My shared account will not allow me to transfer a song my wife purchased on our account. Yet every song that I purchased on our account from my computer transferred to her computer with no problem.

Why can't you move the files? What happens when you try?

Ipod touch 1st generation says "can not connect to itunes store" when trying to get free apps. we have a new computer and i downloaded the newest version of itunes...please help

I bought my son a 1st generation Ipod touch off of Ebay. We set it back to factory settings and downloaded the newest version of itunes. Whenever he tries to download any apps it says "can not connect to itunes" I have checked the wifi connection and that is working (he can get on safari) and we have the newest version of windows. He was so excited to finally get his first Ipod and now cant do anything with it...please help

Try here:
Can't connect to the iTunes Store
What iOS is on the iPod (Setings>General>About>VERSION)?

Can not connect to WiFi on iMac... just started

I have a preferred network t hat all of a sudden I can not connect to on my iMac. The network diagnostics does not even bring up the list of networks. I have 2 other laptops, an iPod touch and another iMac on the network using wi-fi and they are all fine. If Network Diagnostics does not work...how do I troubleshoot?

I would turn Airport off and then turn it back on. You should see your network and be able to log back in. There's also been a number of OS X updates - you might want to get your system up to date as there have been multiple Airport updates.
The other thing you might want to try is resetting (power-cycling) your router.

IPhone 3 can not connect to new nets

Hi, I have an iPhone 3 and it has the problem that whenever I want to connect to a new wifi point access I introduce the correct password and the device says "It is not possible to connect to "NETNAME"" though my iPhone is near to the point access router, it is so near that I even put the device next to the router. This problem didn't happen before, I was able to connect for example to my university's wifi or office's wifi. They changed their nets, so I had to connect again for the first time and then it would be automatic to connect, but I can not connect for that first time, although the net is similar to the mentioned before. What can be the problem? PD: I can connect to my house wifi's but my device has to be really near to the router, its signal caption is really poor.

IPhone 3 G can only connect to Wi-Fi 802.11 b/g.
Maybe because of that since you have no problem connecting to your home wi-fi.

I can not connect via SSH to a MacBook (the internal home network)

Similar Messages

Maybe you are looking for