I couldn't connect with i tunes , while i upload the new software , the device failed and my computer doesn't read my device , and my i phone doesn't work appear on the screen connect to to itunes but itunes doesn't feel with it???
My device cound;t connect to i tunes ..mu computer dosen't feel with it ..can't read it?
Thanks for your response, disconcerting though it may be.
I guess I'll have to look at other platforms.
Similar Messages
-
I am wanting to update my Iphone 3GS to the newer version IOS 6.1.3, but is afraid I might lose all of my photos including my wedding photos, apps and all of my contacts? How can I make sure I will not lose my photos, apps, contacts and all of my passwords. Is there a easier way in order not to lose anything? HELP!!!!
Although included with the iPhone's backup, all photos/videos in the iPhone's Camera Roll can and should be imported by your computer as with any other digital camera.
http://support.apple.com/kb/ht4083
Although contacts are also included with the iPhone's backup, contacts are designed to be synced with a supported address book app on your computer, and/or there are a number of free email accounts that support syncing contacts and other data over the air.
All iTunes content - all music, movies, tv shows, tones, audio and print books, and 3rd party apps should be in your iTunes library on your computer.
Settings, passwords, etc. are also included with the iPhone's backup, but so is a significant amount of other data. There is always the change some of the data included with the backup is corrupt or cannot be restored from the backup. -
Since i downloaded the new software I cant open my itunes app?
has anyone had problems opening itunes after downloading the new software:?
Try restarting your router by removing power for 30 seconds and then restarting.
On your ipod Touch go to Settings > General > Reset > Reset Network settings.
Now attempt to connect.
If you still have problems please give the make/model/version of your router. -
IPhone froze, "restore" needed w/iTunes,but iTunes can't sync w/sec. lock
now iTunes doesn't even acnowledge iPhone and/or saying SIM card not inserted correctly or has SIM PIN Lock! I'm on vacation in Indonesia and feel HELPLESS! Somebody HELP Please! I have new 3G iPhone and worked perfect before trip here from US, and TEXT worked great, but then it just froze! Thanks!
My iPhone is having this problem also. I downloaded a new camera zoom app and opened it to check it out and my phone won't work now. It says I need to restore but iTunes won't sync and says my sim card is not inserted. Gah!
-
I'm so angry!! I bought my iphone as 16GB and it fills up to 13.2 GB only!! I think a software will not fill 2.8 GB (ps: still didn't download the new software!)
16 GB is a rounded up or rounded down value -- it makes it easier when advertising a product. I don't have an iPhone but almost always it is a rounded up value, so you start off with a bit less.
See the link by Stedman1 about how computer mathematics makes this less. When advertising they use 16 GB in base ten terms, but when your device uses base 2 which means it is shown as less.
Don't forget simply formatting a drive for use in an electronic device will use some space. No files on it yet that you see.
Your phone comes with some version of iOS. This will take up space and that is not factored in advertising a device.
This kind of space reporting has taken place since the first computers were sold. It's nothing new and all electronics manufacturers do it. -
After installing the new software Yosemite, my iPhoto is not working is there a fix for this?
After my son installed the new software Yosemite 10.10.1 my MacBook Pro iPhoto has been disabled, and can not figure out how to get it working, Any suggestions?
Upgrade it to the new Yosemite version in the App Store.
-
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?
Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US -
My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work
Have a look through this Doc
http://support.apple.com/kb/TS3281 -
my iphone won't switch on - it has the apple symbol on the screen which doesn't go away. I plugged phone into itunes but itunes is not connecting??
Basics from the manual are restart, reset, restore.
Try a reset. -
my ipod touch was submerged in water and now it is telling me to connect to itunes, but itunes won't connect until i put in the passcode, and i can't do anything to my ipod until it connects to itunes. so, basically i can't do anything from the ipod or to it from the computor. what should i do?
Restore...
From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.
There's more to try but let's go a bit at a time. -
Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?
So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store. -
I lost my ipod touch when i moved flats and i just found it in one of the boxes after 4months and now its asking me to "connect to itunes" but itunes doesnt recognize it because i have a passcode and its asking me to enter it. HEEEEELP please
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library
read this
https://discussions.apple.com/message/20429789#20429789 -
My iPod touch tells me to connect it to iTunes, but iTunes tells me to write the 4 digit code on the iPod. Problem is that the iPod only shows an image of the iTunes logo, and I can't write the code anywhere.
The link is not really broken. I get:
"Due to a scheduled upgrade of Apple's support systems, some features of the website are currently unavailable. We apologize for any inconvenience."
What happens when you try to restore the iPod via iTunes? Error messages?
Maybe you are looking for
-
Simple jsp to show if session state is being correctly replicated ?
Hello, I am making a simple jsp to show if session state is being correctly replicated. I just remembered seeing one somewhere before. It showed the server-name, and the number of request so far in the session.
-
Does my CD support lightscribe?cc=US
The HP support assistand does NOT display a model number that the support SITE recognizes! The only label on the machine is a Microsoft label - no HP label! My HP Pavillion dv7 ????????? has an HP "CDDVDDW TS-L633R" ATA drive. Is is a lightscribe dri
-
Classic PO Creation with Bidder added items
Dear Experts, We are using SRM Bid Decoupled scenario. The Bidder logins to SUS system and responds to RFx. I have maintained the product category in the SUS system. Consider a scenario, A RFx respondent will login to SUS --> access RFx-
-
HT1222 My update won't verify. What do I need to do? I have enough space for the update.
My update won't verify. What do I need to do? I have enough space for the update.
-
How can you view/work on image in CC while still viewing thumbnails in Bridge?
Just switched to CC from CS5. Cannot open an image from Bridge into Photoshop while still viewing thumbnails in Bridge. Killing my workflow by having to reopen Bridge after processing every image in Photoshop. Using two monitors. Another huge frustra