I down loaded v7.01 on my iPad2, but now I can't get out of the "set up iPad" screen, why? I've used this device on my PC for over a year.

Down laded v7.01 (after 7 hours), my pc shows that the the new down load was installed on my iPad2, and was also restored from iTunes backup. But, now I get a screen on my iPad "connect to iTunes, ipad not set up?? Why? Ny suggestions for a fix?

The restore sems not to have completed. Try it again.
Recovery Mode
Follow the instructions carefull and repeat if necessary. Sometimes it takes several tries.

Similar Messages

  • HT3597 I clicked settings general accessibility triple click and clicked voice over and zoom however now I want to get it off the setting and am unable to scroll down to undo settings  (I have an ipod 4th generation)

    I clicked settings>general> accessibility> triple click and clicked voice over and zoom however now I want to get it off the setting and am unable to scroll down to undo settings  (I have an ipod 4th generation)

    If VoiceOver is on, you scroll the screen using three fingers.

  • This bug has been around for over a year: SecurityError: Error #2123: Security sandbox violation

    Hi,
    The bug of 'SecurityError: Error #2123: Security sandbox violation: BitmapData.draw: file:///xxx/xxx.swf cannot access rtmfp://fms4.acrobat.com/cocomo/na2-sdk-xxx/xxx. No policy files granted access.' was first reported in lccs forum over a year ago:
    http://forums.adobe.com/message/2803074
    But the bug is still around. The bug can be generated by calling BitmapData.draw() on a flash.media.Video object which is attached to a p2p stream. It looks like the solution is to have the publisher to call:
    send("|RtmpSampleAccess", true, true)
    on the NetStream object _before_ the subscriber calls NetStream.play(), in order to give the permission to subscribers for audio and video streams.
    In lccs library, the above permission authorisation happens in WebcamPublisher:
    protected function onNetStatus(p_evt:NetStatusEvent):void
    if (p_evt.info.code=="NetStream.Connect.Success") {
    setTimeout(sendSnapShotPermission, 500);
    _stream.send("|RtmpSampleAccess", true, true);
    protected function sendSnapShotPermission():void
    _stream.send("|RtmpSampleAccess", true, true);
    but it doesn't help the problem. In fact, it is not clear to me when this 'snap shot permission' is sent to the subscriber.
    One more note: This is not a critisism for the lccs development quality, but rather a question on how ready lccs is for production use. After encountering this bug, I had to go through the lccs code (the open source parts), and found out that the library is not really written, well, carefully, and it is full of temporary quick-n-dirty fixes.
    For instance in the above example, sendSnapShotPermission() is called after 500 milliseconds, probably to allow something to happen before calling the method, but how can you be sure that it will happen in 500 milliseconds? Probably,an event listener should have been used. Immediately in the next line, we see:
    _stream.send("|RtmpSampleAccess", true, true);
    which is a duplicate of sendSnapShotPermission(). many examples like this can be found throughout the library.
    Aureliano

    Hi Nigel,
    Two questions:
    1. When the publisher sends the access permission to the subcriber by:
    netStream.send("|RtmpSampleAccess", true, true)
    , on the subscriber side, what event or function can handle the guaranteed receipt of the access permission? Currently it is possible to draw the incoming stream video upon receiving NetStream.Play.Star and waiting for 5 seconds or so:
    public class MyWebcamSubscriber extends WebcamSubscriber {
    override protected function layoutCameraStreams():void
    // trying the event listener seems to work here.
    _streamManager.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
    override protected function onNetStatus(e:NetStatusEvent):void
    super.onNetStatus(e);
    case "NetStream.Play.Start":
    setTimeout(function():void {
    // draw the video from the incoming stream here.
    }, 5000);
    The questions is, which event can let the subscriber know that it has the access permission to the video stream?
    2. In WebcamPublisher, why is that the access permission is sent 3 times?
    a. Once on receiving NetStream.Connect.Success with 0.5 second delay, as in below.
    b. Once immediately upon receiving NetStream.Connect.Success, as in below.
    protected function onNetStatus(p_evt:NetStatusEvent):void
    if (p_evt.info.code=="NetStream.Connect.Success") {
    setTimeout(sendSnapShotPermission, 500);
    _stream.send("|RtmpSampleAccess", true, true);
    protected function sendSnapShotPermission():void
    _stream.send("|RtmpSampleAccess", true, true);
    c. Once in onConnectionTypeChange() with 2 seconds delay:
    protected function onConnectionTypeChange(p_evt:StreamEvent):void
    if ( _streamManager.isP2P) {
    _stream= new NetStream(_connectSession.sessionInternals.session_internal::connection as NetConnection,NetStream.DIRECT_CONNECTIONS);
    setTimeout(sendSnapShotPermission, 2000);

  • TS3297 I upgraded my IPhone and lost some of my songs. I have tried everything the guide is telling me to do but have not hald any results. The other problem is because of this it won't let me down load any songs from my PC. If you can help me out Plzzz.

    What can you do on your end to fix this problem??

    Not sure if this helps:-
    The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered  owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work.  Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple  Store and explain that they were gifted to you and ask how you can use them.  The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

  • I'm sorry but i do not like the new down load verson that was put on my computer. how can i get the old one back

    i am in my 60s and just don;t like the new version i would like to get my old version back

    http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

  • I have an iPod shuffle 1 gb in gold I got from Avon a few years back. I hardly ever use it. I charge it when I am going to use it. But now my laptop took a turn fo the worst so I tried to charge it using my wall charger and it will not charge.

    My iPod shuffle won't charge on a wall charger. It won't even light up after 8 hrs. On charge. What's wrong?

    Hi, crazygrandma05.
    You may find this article helpful in troubleshooting your iPod shuffle. 
    iPod shuffle (2nd generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/shuffle2gen/
    Cheers,
    Jason H. 

  • HT4623 Updated iPad2 to ios 7.0.4. iPad restarts and wants to go through setup. I get to the "Set Up iPad" screen; it is asking to restore or setup as new iPad. I pick "Restore from iTunes Backup". I do the restore, but it loops back again to setup

    the iPad seems to be in a loop between setup and restore.  Not sure if I did something wrong, maybe selecting a wrong option after the ios update.

    You are most welcome

  • I just bought a new computer and want to load in photoshop from the old one.  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I can't figure out how to install the CS5 upgrade.  Any advice?

    How do I transfer photoshop from one computer to another?  I have CS5.  Since CS5 was an upgrade I installed CS4 first, but now I cannot figure out how to install the CS5 upgrade.  Any advice?

    karen2179 wrote:
    If you are able to use adobe products on two computer do I really need to deactivate or uninstall CS4?
    No, but it may help the chances of a successful installation.
    karen2179 wrote:
      Just as an aside - I have been getting messages on here from Adobe Admin saying that CS5 cannot be reinstalled because everything is now in the cloud and that for $350 I can buy CS6 to install on my new computer.  What?  Am I getting spammed on Adobe's site here?
    Where did you see that?

  • I've used Firefox for years w/no problem but now I can't get a window to open I still get the menu bar on top. When I try to click open a new window nothing happens. I have a Mac.

    I never have problems with Firefox before. I usually don't put my Mac on sleep mode but I did do that last night. I don't know if that caused the problem or not. I tried to restart my computer thinking that might help but it didn't.

    Try:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can also try to move (delete) the Firefox plist file.<br />
    See [http://www.macfixit.com/article.php?story=20060606082246983 How .plist files become corrupt and troubleshooting the results]<br />
    Go to "Library > Preferences" and remove the plist file for Firefox (org.mozilla.firefox.plist).

  • I downloaded the ios7 onto my Ipad2 and now I can't get online!

    I am at a loss!  I am not technically knowledgable at all.  I downloaded the ios7 onto my Ipad and now its telling me the ipad isnt connected to the server. Then I looked somewhere within the ipad itself and saw a whole list of things that said it crashed!  I'm lost...can anyone help ...immediately?

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iPad device settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
    If still no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • I used a Disk Warrior to rebuild my G4. When loading the program it wouldn't SU with the repair disc so I selected the Disc Warrior as my SU disk and repaired my hard drive but now I can't get the G4 to SU with anything but the repair disc. What do I do?

    I used a Disc Warrior repair disc to rebuild by G4 Power Mac hard drive. It wouldn't
    startup using the disc and the C key so I selected the Warrior as my startup disc, started up, repaired the disc and now I can't get the computer to startup on it's hard drive. It will only startup on the repair disc.  What do I do to get back to normal?

    Press the Option key at startup and select the hard disk.
    (60933)

  • I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    - Have you tried a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try syncing  the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

  • Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this

    When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive.  It would be a few months old so it wouldn't have the complete library on it....any ideas?  I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.

  • I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

    I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.

    Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?

  • I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

    I down loaded the update for 4 and when I get to the end where is you click finish, it tells me to close firefox, but I do not have it open. Now I can not get in to Firefox at all. PLEASE Help.

    You can get Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
    You should still have your profile folder, so when you install 3. you will get your bookmarks and other user data back.
    There is a third party version of Firefox that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox

Maybe you are looking for

  • FullScreen script doesn't work all the time

    I am having a problem with this script. Its weird, sometimes I type in a number like 3333 and it will go to the google link like this: http://www.google.com/maps?saddr=3333&daddr=40.000000,80.000000 Other times I type in the same number and it doesn'

  • [File-Adapter] Reading not finished files

    Hey, my sender file adapter reading files which are not finished yet. The files are created by an ABAP programm. The creation could take some seconds. If the file adapter polls while creation is not finished, we have a problem. The flag "Process Read

  • How to use a Nano in a Dodge Caravan

    I bought cables with right and left inputs that go into the jacks on the front of the six CD/DVD changer. The manual says to put the radio in AUX mode. That's the rub--can't put it in AUX mode, only AM, FM, external disc, etc. Does anyone know how to

  • How to send PO to partner type LS

    Hi I have to send PO orders02 to XI, for that i ahve configured ALE which i tested using we19 for orders02 and was working ok, but when i am creating PO in me21n i am not able to understand the flow, Like how PO gets converted to idoc number (as i ne

  • Photoshop CS3 loading times when opening file or creating new

    Hi all, Every time I open any kind of file or when I create a new file it takes Photoshop at least 30 secs to open or create the file. I also have PS installed on another computer (with the same specs) where I don't have this problem. Does anyone hav