I had a paper jam... unable to remove the E and restart the printer...

I had a paper jam.  Now unable to remove the "E" off of printer.

Please read this post then provide some details.
http://h30434.www3.hp.com/t5/Other-printing-questions/Want-Good-Answers-Ask-Good-Questions/m-p/2094#...
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • My epson NX420 got a paper jam.  I got the paper out but now the ink cartridge holder will not return to the usual place so I can replace ink.  It stays stuck in the corner and lid won't open.  Ideas?

    First time here; hope I'm not repeating.  Can't get my EpsonNX420 that I use with my MacBookPro to work correctly.  Had a paper jame.  Cleaned it out.  NOw the cartridge holder won't move from the corner so I can fully open it and replace ink.  Help

    Call Epson.  Tech support number is inside your user manual or E-mail us for assistance.

  • When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

    Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • Unable to remove Azure VNet and Azure Backup from expired trial

    Hi
    We recently took an Azure trial, tested some bits and let the trial expire. We have now gone back and setup our PAYG subscription however i am unable to remove the vnet and backup service that are attached to the now expired trial subscription:
    VNet: The subscription is in a disabled state.
    Backup: You cannot delete vault <backup_name>
    because it contains registered servers. Delete the servers and the restore points for the server data, and then delete the vault.
    Any thoughts appreciated.
    Thanks

    Hi Mekh
    I have checked the links and unfortunately they dont get me any further. I have removed all other services, sites and vms and there was never a gateway in place however i still cannot remove the vnet.
    For the second link i am unable to drill down into the vnet as it is associated with a disabled subscription.
    The backup service was provisioned under the trial account. I have attempted to create another vault under the active subscription and then attempt the removal again. This still does not work. I have removed
    the vault in the PAYG sub.
    I believe that the problem with the vault on the trail account is that it will be holding recovery points but i am unable to access the service to remove them under the disabled sub.
    Thanks

  • NB100 - I am unable to remove the old ram

    My first post everyone please be gentle
    I am trying to change the ram on my nb100. I am unable to remove the old ram.
    I have changed the ram on previous laptops without problem! tilt ram, remove, replace!
    I am unable to tilt the ram to remove.
    Grateful for any help thanks

    Its the same as any other laptop, pull away the side latches and the module will lift up.
    If that doesn't work, the mechanism may be broken requiring repair at an ASP.

  • Photosmart 8230. How do you Remove the print heads for cleaning?

    Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
    This question was solved.
    View Solution.

    I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
    I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
    Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
    Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
     It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
    Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
    Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
     Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
     I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage  to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET.  You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
    They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them.  The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
    ----- Original Message -----

  • In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

    In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
    These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

    Yea, and it's a pain to get to.  What was the rational for removing the print size button?   With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size.  Of all the buttons you could have taken away, why not fill screen?  I never use that.
    Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop.   The Brush preview window is  unchanged in CC but in CC2014 it's basically worthless.  If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

  • Unable to verify the printer on the network

    Hi,
    I have a home IP network with an HP4100N network laser-printer connected via JetDirect card to a powerline device and then to a hub.
    Up until recently, all computers on my network could successfully print to the printer via the JetDirect card and IP (192.168.0.100).
    HOWEVER, my girlfriends MacBook Pro running Mac OX 10.9.5 suddenly stopped printing to the printer and things were just starting to build up in the print queue. The printer continues to print normally for everyone else on Mac and even a Windows 7 machine, eeek!
    Turning the printer on and off a couple of times, resetting the network etc, I then finally deleted the print queue and tried to setup a new connection to the printer again on her computer via the prefs and the IP JetDirect socket option (like I have done on all the other computers).
    When I enter the printer IP address into the Mac Printer & Scanners settings, Mac OS tried to interrogate printer model etc and it comes back with a Generic Postscript Printer profile and not the HP specific one. (Again, every other computer can setup fine at this point!)
    On her computer, when you try and install the printer with the wrong profile (or even the correct one if manually chosen), it eventually says:
    'Unable to verify the printer on your network'.
    Network utility:
    I then tried using the Network Utility to ping the printer from my laptop, this works.
    I tried to ping the printer from her computer, this doesn't work and it times out!
    then...
    I tried pinging her MBP from my MBP and this works. Then I pinged my MBP from her MBP, this works.
    So her computer is on the network, but is not able to see the printer.
    I then hard- IP'd a new IP address on the printer (just to rule this out), setup all the computers to this new printer, all worked well except for her computer, which once again couldn't see the printer. (I can't ping to it either again from her computer, even with the new IP!)
    I think I've tried all the obvious things, updating software, resetting things, turning the firewall off completely....but all to no avail.
    The problem, it seems to me, is with her MBP rather than with the network or the printer (as all other computers can print!).
    So...the million dollar question is... Can anyone tell me what is going on?! How do I get her computer to print to this printer again??
    thanks very much.

    Yeah, I would agree with you completely Greg, but the baffling thing is it just affects this one Mac. How come it routes 'selectively' so to speak? It works for everyone (incl. Windows 7 machine) but not for my GF's MBP... until such a time that it suddenly feels like working again (all by itself by the looks of things).
    You are right in saying that it defo appears to be some kind of routing problem, but I'm having difficulty in finding out where the problem actually is. Is it the router, the printer or her computer? Could it be the firewall on the router blocking it for her and not for others for some reason? If it was the router, you would expect it to tarnish everyone with the same brush, would you not?
    Whilst the HP printer has the static IP manually set up on that side (192.168.0.100), the router hasn't specifically been told that the printer has the .0.100 address hard coded into it I don't think, so there is a possibility for it to be going weird here. I'll need to look at the router config page tonight and just lock that 0.100 address to the MAC HW of the printer. Perhaps that will do the trick, but still wouldn't explain why it's doing it selectively just to that one computer (not even randomly to others on the network).
    I did try the safe boot too. Within that I ran Disk Utility to fix some file permission errors (there were some group permission problems for the new HP software that I had installed on her computer actually, which DU had fixed). Whilst running the utility, it did throw back issues about the EFI partition map being corrupted etc, but that seems to be a separate problem with the disk utility software not being able to run/fix from the disk it is being booted from, even in safe mode. But this is being discussed elsewhere on Apple Forums and I don't think it's connected to the IP problem I'm having.
    Whilst I was doing the Safe Boot thing, I got sidetracked (isn't that always the case when you troubleshoot) and didn't try and set the printer up within that environment, but instead was trying to figure out why I was getting the EFI partition Map errors. It turned into a late night and I had to hit the sack at some point...
    I tried IPP too. Putting the Printers IP into the address field on her computer didn't result in the HP Printer profile being selected when it tried to find the printer, this stayed as Generic PostScript. I didn't explore any further on that occasion to see if I could manually set it all up and print to it or if the set-up would just hang again. I figured if the IP address of the printer isn't visible to the computer (ie. no route to host), then changing to IPP wouldn't work either.
    I'll give these options another go tonight when I get my hands on her computer again.

  • I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

    I have just updated to Yosemite, but now I can't get the custom short-keys to work.
    In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
    Does anyone have the problem? All the other shortcuts work!

    Hi Thomas,
    I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
    Thanks for identifying this issue!
    In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
    Cheers,
    Alex

  • When I try to open Firefox 3.6 (Mac) by clicking on the icon, I get this message: "Close Firefox: A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I've removed older versions and restarted, but still get this message. Wh

    I've just downloaded Firefox 3.6 (Mac). When I attempt to open, this message pops up: "Close Firefox: A copy of Firefox is already open. Only one copy of Firefox can be open at a time." I've removed older versions and restarted, but still get this message. What's going on?
    == This happened ==
    Every time Firefox opened
    == after I downloaded the latest version. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    You might find your solution in [http://kb.mozillazine.org/Profile_in_use this article].

  • Unable to get the print option in network for Services

    Hi Experts
    I am unable to get the print for services in CN21/CN22 but the print option is in Disable Mode .How should I get it as to Enable Mode to get print .Pl find the attached screenshot for reference
    Thanks in Advance
    Ambarish

    Hi Ambarish,
    There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement  only  . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
    Also check whether you have required authorization to  print from SAP
    I hope so it will help you
    Regards,
    Aparna

  • How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

    How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Unable to locate the Printer Code for Desktjet 3070A, please help?

    Unable to locate the Printer Code for Desktjet 3070A, please help?

    You can follow this link for steps on getting started with ePrint on the Deskjet 3070A: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728147&cc=us&dlc=en&lc=en&product=5068754&too...=
    I am an HP employee

  • I have an error message on a paper jam. I pulled the cartridge and there is no paper on the roller,

    I get an error signal that I have a paper jam. I did, but cleared the paper. Still getting the message although there is no paper jam. 

    Hi
    You might need to reset the printer.  This is normally done just by truning off the printer.  Then uplug the power cable from the wall socket.  Wait about 30 seconds.  Then plug the power cable back in and trun on the printer.
    Hope that this helps
    ---- If my answer was helpful please click the Kudos star.
    If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
    (I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

Maybe you are looking for

  • Reading in data from a file

    Hi, I am tring to read data from a file into my Web Service program. Its a plain text file with item descriptions and price info etc. At the moment I'm trying BufferedReader in = new BufferedReader(...) but I keep getting an exception with Tomcat not

  • Calendar export doesn't work in IE

    Hi, Our clients use Internet Explorer and with the standard setting (menu Tools, Options, section Security) "Do not save encrypted pages to disk" marked it is not possible for users to make an export of their calendar with UWC. Does anyone know how t

  • Query Cannot be Parsed Within Builder

    Hi, I'm trying to parse different Oracle database connections so users can do a search by database. I am setting this up in the HTML DB and have set up the appropriate Item which is P"(_HUB and within this I have set up the List Of Values. However, I

  • File Write In Batches Is Not Consistent.

    Hi, Could you please explain why File Write in batches behaving like this: http://lksoablogs.blogspot.com/2012/01/file-write-in-batches-is-not-consistent.html Thanks.

  • My headphone jack is acting weird

    I have a ipod touch 4th gen. Whenever i try to listen to music or anything through ear plugs, all i hear is static and perhaps a faint bit of what im trying to watch in the background but most of it is static. i have used two differ ent ear plugs bot