I have activated the passcode lock on my iPad sometimes ago and now I forgot it, I entered several passcode but did not work, now the iPad is disabled and would not connect to iTunes. What can I do to unlock my iPad

I have activated the passcode lock on my iPad sometimes ago and now I foregot it, I entered several passcode but non was correct, now the iPad nis disabled and would not connect to the iTunes. what can be done to unlock my iPad?

If you've forgotten the passcode then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808

Similar Messages

  • Hi, I have Apple earbuds that came with my iPod years ago, since then they've ya know, taken some hits, but they still work. The problem is the left isn't as loud as the other and it sounds really odd. Can I get them replaced at the Apple Store?

    As said in the question, the left isn't as loud or harmonic as the other, can I replace them at the Apple Store? Hopefully for free?

    The headphones have the same one-year warranty as the rest of the hardware.  But it still can't hurt to ask an Apple store agent about replacements.  Realistically, though, you'll probably just ahve to buy a new pair.

  • My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

    My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

    It seems as though you are describing two different things, unless you are trying to say that you cannot connect to the iTunes Store on through the phone. If that is correct, suggest you try and do a search, the question has been asked a great deal and answers can be found. Maybe even try and describe the error message you are seeing when trying to connect.

  • HT1212 I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying "  iPhone is disabled connect to iTunes" What can be done?

    I have connected the iPhone but iTunes won't recognize it. The phone has a red sign saying "  iPhone is disabled connect to iTunes" What can be done?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Hi I need help on my iphone I forgott my pasword and I disable it and it says disable connect to itunes what can I do please help me and I dont have.itunes account I only have an icloud account only please help

    Hi I need help on iphone I forgott my pasword I disable it I only have an account with icloud only  please help me

    I'm not sure what you mean by "iTunes is not enabled" -- if you read the above link, the question is whether you've previously synced with the iTunes application on a computer. If you have, you connect to iTunes on that computer. If not, you follow the "Use Recovery Mode" procedure near the bottom of http://support.apple.com/kb/ht1212

  • MY CHILDREN MANAGED TO LOCK BOTH THEIR IPOD TOUCH 2ND AND 4TH GENERETION. THE MESSAGE IS ''TO IPOD ΑΠΕΝΕΡΓΟΠΟΙΗΘHKE ΣΥΝΔΕΣΗ ME ITUNES'' WHAT CAN I DO TO UNLOCK THEM?

    i have two ipod touch 2nd gen and 4th gen that my children ''managed'' to lock (they forgot their password .....)
    can you give the way to unlock them?
    Thanks in advance.......

    The only way to do that is to connect to iTunes and erase the data. If iTunes will not let you restore by prompting for the passcode, see: http://support.apple.com/kb/HT1808

  • My iphone 4 of ios 7.1.1 sim card is  not working, it always shows searching whenever i insert sim in it. What can i do? please help me.

    My iphone 4 of ios 7.1.1 sim card has not working from since yesterday, it always shows searching whenever i insert sim in it, i do it again and again, but it cant be fix. What can i do? Please help me.

    Get a new SIM from your carrier.

  • I have just updated my itunes and now my phone won't show up when i plug it in to connect to itunes, what can i do? is there a solution?

    I have just updated my Itunes to the latest version, now when I plug my phone in using my USB, my phone won't appear on my Itunes. Now I can't sync my music, can anybody help please?

    See this thread: iTunes 12.1 Not Finding iPhone

  • My ipod touch is disabled for 22 million   minutes and it won't connect to itunes what can i do?

    My ipod touch is disabled for 22 million minutes+ and i have seen videos where it says to connect it to my laptop and restore it but it says "itunes cannot connect to the ipod because you need to enter the password" obviosly i cannot do this because it is disabled for 22 million minutes+ . please can someone help me.

    light-blue text is a link click on it
    Recovery mode

  • My Ipod Classic is stuck on the restore screen but it won't restore when connected to Itunes, what can I do?

    My Ipod classic is stuck on restore mode, every time I try to use it the Apple logo apears and then the restore screen. I tried restoring it on my Itunes but the action cannot be completed. Can anybody help me out?

    Perfect.  Perhaps you could take a look at all of the suggestions in this Apple support document related to your issue.
    iOS: Unknown error containing '0xE' when connecting to a Windows PC
    B-rock

  • I just bought a brand new Ipod touch but when I went to update it, a screen keeps popping up saying that the apple mobile device (recovery mode) was unable to install to my ipod and the ipod will keeps showing me the connect to itunes, what can I do?

    i really need help with that

    Maybe here:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    Otherwise com back with the exact wording of your error message. The one you gave does not seem correct.

  • HT5559 I've followed the instructions to re-enable apple supplied Java SE 6 but this does not work. Java is still disabled and I'm having problems with dependant applications.

    I've followed the instructions to re-enable apple supplied Java SE 6 following upgrade to version 7 which caused a number of applications to stop working.
    I wondered if anyone has had any joy re-enabling JAVA SE 6. I've tried contacting Apple but cannot get any response. They've sent me back default messages claiming that they have tried to contact me - they haven't!  I'd be grateful for some help with this. Thanks

    This is the latest news about Java.
    http://www.macobserver.com/tmo/article/java-7-update-13-addresses-security-vulne rability-os-x-block
    I do not use Java. So I cannot verify that this is the solution or not..
    Best.

  • I got my ipod touch 2 a while ago, and was locked out. however, we got rid of the computer with the original iTunes. what do we do to unlock it?

    a while ago we got an ipod touch 2. my son and daughter tried to guess my security code too many times, to the point where i need to plug it into my itunes to unlock. i remember the passcode from year ago. however, we got rid of the old laptop with it's original itunes. what can i do to unlock it?

    Connect the device to the new iTunes library in recovery mode and restore it to factory settings.  There are no other alternatives.  Here are steps for getting your iPod Touch into recovery mode.
    http://support.apple.com/kb/ht1808
    B-rock

  • HT1212 i locked my ipad mini and tried to disabled it  on my computer which is Windows and wont open ituneskeeps telling me to re install but did that 10 times

    i locked my ipad mini and tried to disabled it  on my computer which is Windows and wont open ituneskeeps telling me to re install but did that 10 times

    Lucky for you this happened, and was fixed before.   Hope it works for you..
    https://discussions.apple.com/thread/2735255?start=0&tstart=0

  • How do I fix a ipad that is "disabled"? When we connect to itunes it requests a password that must be typed into the ipad - which we can't do because it is locked.

    How do I fix a ipad that is "disabled"? When we connect to itunes it requests a password that must be typed into the ipad - which we can't do because it is locked.

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
    A Complete Guide to Recover Your iDevice if You Forget Your Passcode
    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Maybe you are looking for

  • Newbie needs help with Flex app

    Hi there. I am very new to Flex and also fairly new to programming although I do have a little experience. I am trying to create an app which stores code snippets or common text I tend to use every day in my documents and emails. So basically I need

  • After using PC Suite, windows won't shut down

    Hi, I'm using bootcamp on a Mac(laptop), running Win XP, SP2 PC Suite 6.84.10.3 Nokia 6288 I connect to the internet via bluetooth and everything works fine until I diconnect. Most of the time when I click disconnect(and every time when I ttake the p

  • How to send images and other colored text in email body

    Hi We are using SAP CRM 4.0 and we would like to send email to our customers using actions configured for activity. Our objective is to send Marketing Emails containing <u>Images and Color texts</u> in the BODY OF THE email and not as a PDF attachmen

  • Loading dimension hierarchy too slow

    I have a cube, 4 dimensions for the cube. I got a problem when I brower the cube: dimension "Customer", there is a "Customer Hierarchy": I want to browse the data from BI, I drag the hierarchy to row fields, it is ok, it is ok if I click "cust Name",

  • Forcing a symbol within a symbol to play out when a button on the main timeline is clicked?

    I have a buttons that play to symbols on the timeline. Once another button is clicked on the timeline the symbol will playout then start playing the next symbol. This is the code used on the onClick event on the introduction button. var current = sym