I have an iMac 2011 model. Keep it up to date. When I try to turn it on, I have a blank screen and a series of beeps. Tried pressing the command and R keys. But it keeps beeping. Anyone experience this before?

Can't turn on my iMac. Keeps beeping.

Is it 3 beeps then stops then 3 beeps again? If it is that is a RAM error.
Look here for details on the beep codes.
http://support.apple.com/kb/HT5860?viewlocale=en_US

Similar Messages

HT4557 Selecting a shared library starts connecting and gets to what looks to be 50% of the time circle and stops without connecting to the shared library..... Has anyone experience this before and knows how to overcome it?

I have an iphone 5 with the current operating system and an up to date itunes as of 01.04.13. The strange thing about this problem is that I have the "remote" app also installed and the Iphone can access the shared library and control what is played on itunes on the PC but not the other way around. What I want to do is play from my library through my Iphone but it is not connecting through the music application???

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

When I try to play a film - I get a black screen and no audio, but apparently the film is playing?

Basically says it all in the topic

Hello KnightyLAD,
The following articles can help sort most playback issues in iTunes for Windows.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
iTunes for Windows XP: Troubleshooting video playback
http://support.apple.com/kb/TS1386
Cheers,
Allen

I upgraded my cloud storage from 2G to 120G and today it went back to 2G and I cannot save my work. Anyone experience this? Unable to get any customer service.

I upgraded my cloud storage from 2G to 120G and today it went back to 2G and I cannot save my work. Anyone experience this? Unable to get any customer service.

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.

My IPad screen is grey even after I tried pressing the sleep and home button for reboot but turns out it stays grey.

You can try to reboot a few more times. If it doesn't come back and you normally sync to a computer, hook it up and see if the 'guts' are working even if the screen isn't.
Beyond that you should make an appointment at your local apple store and have them check it out.

I have a blank screen and it won't reset

I HAVE A BLANK SCREEN AND IT WONT RESET

Try:
iOS: Not responding or does not turn on
If not successful, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

Help, got an iPad 2 and it will not turn on? Just got a blank screen with a apple logo. Tried restore (I.e. holding down both buttons for 10min) iTunes also does not recognise iPad when connected to mac?

If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

I have my username, password, and sync key but I cannot click the next button to complete the sync setup?! Neither the next button nor the cancel button press?!

I try to setup my sync account with Ubuntu 13.10 and I am able to enter my user name and password and recovery key but the next button will not click and neither will the cancel button. Only the back button, sync options button, and the x at the top of the screen are functioning?

Did you enable the Side Bar?
Select "Show Side Bar" from the "View" menu of iTunes.

When a try to turn on my macbook, a continuous alarm sounds and wont turn on. Just a white screen. Anyone know the problem

I tried yesterday to get on my computer but when it began to power up it stopped showing a white screen while emitting a loud beep every 2 to 3 seconds and wouldnt stop. Anyone know what the deal is?

If you experience one of these beeps, you should call your Apple-authorized service provider for additional troubleshooting assistance.
1 beep = No RAM installed/detected
2 beeps = Incompatible RAM type installed (for example, EDO)
3 beeps = No RAM banks passed memory testing
4 beeps = Bad checksum for the remainder of the boot ROM
5 beeps = Bad checksum for the ROM boot block

While updating Ipod we now have a blank screen and when connecting to itunes the ipod is not showing under devices

While updating ipod touch we now have a blank screen. I have updated itunes but am unable to sync because the ipod does not show under devices. I have tried shuttng down and restarting but only have a blank screen or ap0ple logo. Sometimes the screen shows connect to itunes but that has been it.

I have the same problem, after upgrading my itouch to iOS6, it doesNOT respond to anything, apple logo stays on the screen all the time and does NOTHING! restore does not work either.... i hope we can get an answer from someone soon... apple support did not have an asnwer.

I was sent pi- you know 3.14159 but a lot more characters, and it froze my ipad messages app, when ever I open it, it's just a blank screen and it eventually crashes!:( how can I fix this? I've tried a lot of stuff plz help

It's froze my ipad messages app. Plz help tell me what to do.

You can backup the iPad and then do a restore to factory condition which will completely wipe it: Settings > General > Reset > Erase All Content and Settings. But, before doing that remember, it completely erases everything.
You then have to restore from a backup...if you have a backup from before the bad message, you can use that and be fine. If not, you would be better off setting up the iPad as new and then redownload your apps and music...you can do that by going to the app store and itunes and tap the Purchases button and redownload everything.
You will loose your photos and email, and such in the process, however. If you have iCloud, put the photos in PhotoStream and then use that to put them back on the iPad.
Without a good backup from just before the bad message, erasing is going to cause you a lot of work.

Missing license keys in adminui. Has anyone experienced this before?

We have recently installed LiveCycle server into our Test environment. However, for some reason when we go Home > About, no licenses show up. We do not experience this in our other env (DEV, APOC) where liveCycle was installed. Here is a screenshot.
When we run our workflow processes in this env, they work fine. New processes are able to reference the barcoded forms.Decode call that we just installed. Similarly, our external EAI server is able to call the LiveCycle web services with no problem.
Has anyone else experience this issue? Should I be concerned?

What do you see in the licensing section of the landing page once you log into the adminui?
Can you send me your server log file and I'll take a look for any related issues?
Thanks,
John

HT4972 I Replaced my cracked screen and function key but my phone wont power on?

I replaced the cracked screen on my phone. When I finished the function key wasnt working so I replaced that now my phone wont turn on! any one have any advice on what to do?

Radio Shack replacement of smart phone screens was part of a TV news article on how much original vendors charged to replace the phones vs amount Radio Shack charged to replace the screen - I think it was about $100 to have it done.
Just like replacing a watch battery - its all about having the proper tools to do it.
I did use Internet instructions on how to change the battery in a game boy game - without the proper tool (a soldering gun and some solder) it took a few tries to get the connections and battery taped into place and get the game taped shut - before the game would power up and save.

My macbook pro has a blank screen and wont charge, but when i put the charger in it turns on, i here the chime and can even hit play and a spotify tab i have open.

Its a 2009 15 inch model

Hi druebanks,
Thanks for visiting Apple Support Communities.
Start with these suggestions if your MacBook Pro battery does not charge:
If the battery is removable, remove it and install it again, to make sure it’s properly installed. Refer to the manual that came with your computer for more information about properly installing the battery.
Make sure you’re using the correct power adapter for your computer.
Apple Support article: Identifying the right power adapter and power cord
Make sure the power adapter is connected to your computer and is plugged into a power outlet.
Reset the System Management Controller (SMC), which controls how your computer manages power.
Apple Support article: Resetting the System Management Controller (SMC)
If the battery still won’t charge, your Mac may need to be serviced.
Find out how to service or repair your Mac
From:
OS X Mavericks: If your battery won’t charge
http://support.apple.com/kb/PH14257
Best,
Jeremy

When alt + tab between applications firefox freezes to a black blank screen and will not move. The only response it will allow is the close option after right clicking on the task bar in English

I normally have several applications running at the same time, some of them are running 24/7/365.
When accessing the applications its easier to alt+tab between them. On the occasions that I can actually get Firefox to open and stay open it always freezes and remains immovable on the screen after switching to another program.
Firefox goes black except for the border and the close button at the top right. The other buttons disappear. Even after waiting for a period of time it does not clear.
The freeze can occur either on the first switch or second switch. However, it always happens.

Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

I have an iMac 2011 model. Keep it up to date. When I try to turn it on, I have a blank screen and a series of beeps. Tried pressing the command and R keys. But it keeps beeping. Anyone experience this before?

Similar Messages

Maybe you are looking for