I have been using DREAMWEAVER MX for almost ten years to keep a website up-to-date. Can I switch to iWeb now to do the job, and if so, how do I go about it?

With MacOS 10.7 looming on the horizon, using veteran software DREAMWEAVER MX any longer does not seem to be such a good idea. I would like to use an editor that can cope with the new MacOS. Is iWeb that editor?
Specifically, I need some clarity on these issues:
Can I switch to iWeb now to  create and publish content in my old website for which I have been using DREAMWEAVER MX?
Can I use the html layout I have been using in DREAMWEAVER, or do I have to steel myself for drastic changes?
How do I import the complete website into iWeb – if at all?

If you switch to iWeb you will have to build the site from scratch since iWeb can't read or import html files.  Also since  the future of iWeb is a little uncertain as to if it will be continued to be supported by Apple it might not be the best move at this time.
You might look into upgrading to Dreamweaver for Mac.
OT

Similar Messages

  • We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required

    We have two users that have been using Creative Cloud for almost a year. Recently, sometime in the last 4ish weeks, the users can no longer run Creative Cloud apps. (Yes, our subscription is paid.) Error simply says administrator access is required to install. The apps have already been installed. The users cannot run them unless they are in the local admin group.Using "Run as admin" does not work. It gives the same error.
    I have opened a case with adobe support and was basically told to suck it up and put the users in the admin group. Actually, what was said was that it is "mandated that the users have administrative rights". 
    There are a couple of things wrong with this. It was working for both users until recently - a recent required creative cloud update. The users have never been local admins yet the apps were working (poorly, but working).
    We are in an enterprise environment and users simply do not have administrative rights on the computers.
    I have changed permissions on all adobe folders, granting users or authenticated users modify or full control rights, did the same in whatever Adobe registry HKLM keys I could find. Nothing has allowed the users to run the apps - unless they are put in the local admin group.
    Someone has to have a fix for this. Adobe apps have proved to have far too many vunerabilities to even entertain the idea of elevating user rights. I can't imagine that enterprise environments are allowing this.
    Any help or suggestions are greatly appreciated.

    Jeff,
    Thank you for your response. The users in question are "standard" domain users. We do not reduce users permissions below the standard level.
    The apps do not load with their current standard user permissions.
    The thing that makes this odd, is that up until recently they did this issue with cloud apps. The only way I can make it work for them now is to put them in the local administrator group on their pc's - which is not going to happen.
    This is what they now see. As I said before, this was not a problem up until recently they would see all their available apps. If I put them in the local admin group the apps are listed without having to install. Everything is there, just not accessible to the user.

  • TS3623 I have been using apple TV for a 2+ years now an I just purchased several new TVshows that started in Sept 2013.  In the past shows I have not yet watched had a green dot by them, but now this does not exist and i forget which show i have already w

    I have been using apple tv for 2+ years and i just purchased several new shows that began in Sept 2013.  In the past, episodes I have not yet watched were marked with a green dot, but now that dot is not there. 

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • I have been unable to upgrade for almost a year. The upgrade loads partially, but won't complete.

    I'm on Mac OS 10.6.7, computer is about a year and a half old. I think I may have had one successful upgrade very early on, to 3.5.2. Every time I've tried to upgrade since then, it starts but won't complete. It's getting to the point where this has got to be upgraded, and I simply can't get it to move. I've noticed Firefox has been crashing, which it almost never used to do. Help!!

    If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • I have been using my macbookpro for the past 2 years and suddenly yesterday it stopped connecting to wifi and keeps sayin airport card not installed...pls help

    I have been using my macbookpro for last 2 years and suddenly yesterday it's not connecting to wifi nd keeps saying no airport card installed...how can I fix this?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I bought my iPhone 4 in Canada and have been using it here for the past 7 months. In september i will be moving to the UK and am wondering if I get a UK sim card will I be able to use it as my cell phone over there?

    I bought my iPhone 4 in Canada and have been using it here for the past 7 months. In september I will be moving to the UK and am wondering if I get a UK sim card will I be able to use it as my cell phone over there?

    Hi: I don't believe that Telus provides unlocking for the iPhone. Other phones, yes, iPhone no.
    Follow-up info from Telus:
    http://www.telusmobility.com/en/BC/Unlock-Device/unlocking_your_device.shtml?eVa r6=link
    Stedman

  • I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    I am having strange issue with my apple tv...i set up pictures to scroll through to the tv using home sharing.  Now album covers are interspersed with my pictures.  I have been using apple tv for a while and never had this happen before

    Are you watching this content though iCloud or though from iTunes on your local computer?  If it is from iCloud have you tried downloading the content to iTunes and watching it on ATV from that source to see if it still happens?  This is geerally a much more reliable way to view the content.  Easer to fast forward and rewind too.
    - I have a stable internet connection
    Clearlly you don't
    >(Ive tested on other devices)
    Which does not tell you anything about the specific connnection from ATV to iCloud.
    >I am able to stream Netflix problem free from my AppleTV without so much as a hicup
    Again which does not tell you anything about the specific connnection from ATV to iCloud.
    >- I am able to download the episodes to my phone, ipad, and computer without any issues
    Again which does not tell you anything about the specific connnection from ATV to iCloud.  It does remove your ISP throattly traffice as a possible cause though.  So that is good.
    Have you checked your wireless rounter?  Tried doing the factory restor on it?  Upgrading it's firmware?  Is it and or ATV getting extreamly hot when this problme happens?

  • HT204268 I used an AOL name several years but have been using a .mac for at least three years. Do I need to do anything?

    I used an AOL name several years but have been using a .mac for at least three years. Do I need to do anything?

    If you are no longer using the Apple ID with your AOL User Name, and you do not have any purchases that you may want in future tied to that ID, you don't have to do anything. If you think you may ever want to access past purchases done on that ID, you need to change it to a valid email address.
    Cheers,
    GB

  • Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the f

    Since updating to LR5.5 it crashes about every 5-10 images while working in the development module. Computer is PC Windows 7 Home Premium. I have been using this computer for several years with zero problems. Is this related to the updating? What is the fix?

    Do you get an error message? If so, what does it say?
    Do you get a Blue Screen?
    Does something else happen?

  • Have been using 3.6 for a j d edwards programme new computer is w8 what is the best compatable d/load

    have been using 3.6 for a j d edwards programme new computer is w8 what is the best compatable d/load have loaded latest version however when jd Edwards loads when each section within jd Edwards is opened blue circle saying launching application but that is as far as I can get . Had this problem with xp but wasa ble to dload older version of fire fox but it appears that these olderr versions are no use with windows 8

    Windows 8 Professional supports virtual machines, so you could install Windows XP in a VM and then use that to host an older version of Firefox. This does not appear to be minor undertaking: [http://4sysops.com/archives/windows-8-xp-mode-part-1-hyper-v/ Windows 8 “XP Mode” – Part 1: Hyper-V - 4sysops].
    Can you run your JD Edwards app in IE10 in compatibility mode? If so, that's probably the simplest workaround. You still can use Firefox for other browsing.

  • So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music  app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that 2

    So I have been using my iPad for a few months now and I recently noticed that the time display next to the playlist name in the music  app that is supposed to display the total song count and time of a playlist is way off. I have a 25 song playlist that is around 2 hours on my computer appears as 2003 minutes on my iPad.  It's a smart playlist limited to 25 songs if that makes any difference. Is this happening to anyone else? Any help would be appreciated!

    Greetings,
    First make an iCal backup, File > Export > Archive.
    Remove the following to the trash and restart your computer:
    Home > Library > Caches
    Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
    Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
    __NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
    Once the computer is back up and running open iCal and test.
    Hope that helps.

  • Using Yosemite - cannot project screen onto TV.  Get bits and pieces or black screen.  Have been using same setup for years.

    Using Yosemite - cannot project PC screen onto TV.  Can get a black screen or bits and pieces of a screen ( not always the one displayed on PC).  Have been using same setup for years.
    Thanks for any help

    Hi, edward.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are having a display issue with your MacBook Pro on your TV.  I would need a little more information regarding how you are connecting your device and what content is being displayed to provide a better answer.  However, here is the best troubleshooting resource to go through when experiencing these symptoms.  
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT201177
    Cheers, 
    Jason H.

  • I have been using XBOX Live for 3 months and recently the...

    I have been using XBOX Live for 3 months and recently the NAT has been set to Moderate and I need it to be open.  I contacted Linksys via phone and said I need port numbers from Xbox Support but I can not contact XBOX via phone.  The number I am using is 1 - 800 - 4MY-XBOX. My router motel is WRT 300N and using the 360 with Call of Duty 4 and Halo 3. Someone know how to fix the NAT setting to Open.  Please make it easy to understand?? Very tried and thinking of swiching routers to anything different!!

    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=74742

  • I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

    I have been using Itunes Apps for some time. Today I signed to Itunes to get Apps updated. Apple said I must update my account. I did that with a new password. Itunes said invalid support. Now what can I do?

    What do you mean "invalid support"? What EXACTLY did it say? Did it say you had an unsupported SIM after updating the firmware on your phone?

  • I have been using airplay speakers for about 18 months successfully and I now find that it has a locked symbol and not always obtainable

    I have been using airplay speakers for about 18 months sucessfully and now find it has a locked symbol and isn't always available

    I have been using airplay speakers for about 18 months sucessfully and now find it has a locked symbol and isn't always available

Maybe you are looking for

  • Dynamically changed view within a IFrame object in HTML page is not visible in UI Automation tree

    Hi,  I have a webpage where are are some links in the top of the page. Then there is a IFrame. When the web page is hit, it opens with a default page in the IFrame. Clicking on each link will load a page in the IFrame alone.  The UI Automation tree d

  • Help installing Cs2 On New Computer, please.

    I have what is, for me, a serious issue. I am a long time user and my needs are very basic. I upgraded to CS2 years ago and found this level of product more than sufficient to my needs. I now want to install it on a newer computer. Cs2 is an upgrade

  • Connecting ipad ibook to mac?

    I purchased an ibook on my ipad.  Some of the print on a chart is too small to see and won't magnify. Could I connect my ipad to my mac  and print the info.  Iv'e tried connecting with the cord but I don't know what to do next.  I know I'm a novice. 

  • Expand and collapse button in maintenance view

    hi all,            i want help for functionality of expand and collapse buttons present there in maintenance view. delimit button is also there what is the functionality for these buttons. u ppl can see these buttons while enetering values in standar

  • Illustrator file saves as blank jpeg

    HI everyone. I have a large illustrator file that I need to save as a jpeg for a table cloth printer. Every time I try to save the illustrator file as a jpeg the jpeg opens blank. Does any one know what might be going on? I've never seen this happen