I have got a i phone still on contract and my ear phones are broke can i get an other pair free
I have4 got an iPhone still on contract and my headphones have broken already, would it be possible to get a new pair free?
Unless your carrier offers an extended warranty, the contract is irrelevant. The warranty is based on the date of purchase and will vary depending on your location. In the US it is one year, and should cover the headphones unless Apple determines it to be damage from misuse. Als, if you have Apple Care+, the tems are different. Visit the place of purchase, or an Apple Store.
Similar Messages
-
My iPod touch 4g has ruined 3 pairs of my headphones and my speakers aren't working, can I get it replaced for free? Or do I have to pay for it to be replaced?
As I said in my previous reply:
If defective, Apple will exchange the iPod at no cost unless they have been abused. That applies to Apple earphones too.
Apple Retail Store - Genius Bar -
I have put new software on a iphone 4 and it had erase the contact can i get then back
help me
If you've been using the device as designed, contacts would be synced to a supported application on the computer or a cloud service, simply sync them back.
Otherwise, a backup should have occurred prior to the update and this hopefully contains your contacts. Restore the backup. -
If i got an iphone 5 and synced it with my computer,
can i get the contract from my iphone 4 to a iphone 5 without upgrading the contract?
(So that i will still have the same contract) (I have verizon.)Ask Verizon.
You will have to activate the phone through them. -
I have IPhone 5. Songs on phone do not match songs in my itunes library. Can't get rid of songs on phone because they don't show up in library.
Hi there,
It sounds like you may need to hide these purchases in the iTunes Store in order to prevent them from displaying on the Apple TV. Take a look at the article below for more information.
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/ht4919
-Griff W. -
I have got a Activation Lock on my iPhone and I need to get it activated. I don't know what Apple ID I was using with my iPhone. It shows as U***@h******.uk which is too short to be my email address. I have reset all my Apple ID passwords and none are activating my iPhone. I have also been into the apple store and they have tried to find out the Apple ID my iPhone was using but this was not successful. The serial number of my iPhone is: C32JN641DTWF
You are going to need to change the email address you use with your old ID. Once you have got access to your old account you will then log into both accounts at the same time on your Mac and transfer your data to a single account. We can do this later, but need you to get access to your old account first.
My Apple ID -
My main PC with my Itunes Library just crashed. I still have all my music on Apple TV, Ipod Touch (Gen 2), and Iphone 4 (verizon). How can I get everything set up on a new PC and working ?
I downloaded Itunes 10.2 on new desktop, ran sync with my ipod touch (Gen 2) and have all my music on new PC. Just can't get it to sync with my Apple TV (Gen1). I have made music purchases on Apple TV and cannot get them to Ipod/Iphone? Help
-
I need to erase all Contents and Settings from my i phone 5 but I forgot the restrictions passcode. How can I get it. ( Idon't have access to i tunes). Thanks.
Not possible. You need access to iTunes.
The passcode will be required to make changes to these settings or to disable Restrictions. Note: If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
The above comes from here:
http://support.apple.com/kb/HT4213 -
Hello .. I need to know please how do I know if some one got the access to my iCloud account and saw my phone contains ? Thanks
Ahmed8885 wrote:
but I was shocked when I log in using my account on my friend iPhone device and I was surprised that I started to receive and see all my photo stream loading to his phone !
Really? What did you expect was gonna happen when you logged in using YOUR APPLE ID/PASSWORD?
That's the way things are supposed to work. -
alled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?
Many thanks.
Victor. I have got a 1500 Kinetic Systems CAMAC crate and 3932 controller. I want to use it with LabView installed in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Thanksalled in PCI-bus IBM PC, which does not have GPIB interface. Which way would be easier for developing my own instrument driver: a new GPIB controller + interface or 2915 Kinetic Sys. PCI-bus in-slot interface? Can the latter interface be used with LabView?Victor,
I couldn't find an Instrument Driver for the 3932 crate controler. There is a driver for the 3988: http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/045f8392cc4d1b01862568ab005fbb49?OpenDocument
If you look at the driver it isn't too complex. Well ... actaully there are certain differences when using the 3988 GPIB controller that the driver takes care of that relate to correctly passing commands (FAN).
If the 3922 controller is similar then maybe you can use the 3988 driver and modify it to meet your needs. I'm not familar with the 2915 Kinetic system so I'm not sure what would be easier.
If you have a GPIB board, then you could try using the 3988 driver with your 3922 controller and see if you can modify the driver to get things to work.
I
've only used the 3988 and that was quite three years ago but it might be worth a try.
Best of luck,
Kamran - NI -
what is the redemption code? I have got cd of adobe creative suite 6 and I have just subscribe in creative cloud and I want to activated? so what is the redemption code?
about cs6, Find your serial number quickly
about cc, there is no redemption code. you use your adobe id to sign in and start downloading your apps, https://creative.adobe.com/ -
I have got lot of songs in my mobile and I want to put that in to Ipod. Is it aviable? Without buying? from Itunes?
Put all of your music in itunes on your computer, then sync to the ipod.
-
I updated my storage to 20gb however my phone still shows 5gb and i can not download the update. iOS8 How can I change the setting on my phone to 20gb.
You can't update on-device storage like that...you are probably referencing iCloud storage, which doesn't effect your on-board memory. Plug your phone in to iTunes and download the update that way...no deleting apps or anything...it's much easier.
-
i have recently lost my iphone. Both mine and my husbands phones are synced to same apple account and now his phone is recieving ll of my i messages and i am not getting them. How do i stop this?
Sounds like your sharing the same apple id. settings - message - send&receive - make sure the cell number is the default for both phones.
-
I try to down load some app... But said that I have to read the new term on iTunes and agree. So by the time I get to the end of the term there was no agree thing for me to agree on. How can I fix that. Thank you for ur help.
Thank you for your help are you aware of any apps that will work the iso 4.2.1 system that will let you watch movies on the phone. Also I tried to down load something else the other day and got message that Safari wont let you open this is ther any to see if i have the latest safari on my phone?
Maybe you are looking for
-
TypeError: Error #1009: How do I find the exact line of the error?
I got the following error when testing a project: [SWF] ProjectZ_iOS.swf - 12154544 bytes after decompression TypeError: Error #1009: Cannot access a property or method of a null object reference. at ProjectZ_iOS_fla::MainTimeline/goB
-
My mail smart groups are too large for server - How do I make smart groups smaller e.g. A-F, G-L, M-S T-Z? Any help appreciated
-
Hi, I have to validate some fields in transaction ML81N (service entry sheet). If these fields are initial, an error message must be displayed. My question is: do I have to format the error message using MMPUR o something like that or do I have to us
-
Server missing in Server Monitor after connection
Hello! I'm facing a strange issue on our XServe (10.6.4). We have enabled LOM for this Server and created an account for this. All is working fine. When I open up Server Monitor (on the Server or a administrating Mac) I can see the Server with the in
-
hey is there a way i can filter messages into defferent folders on an N70?