I have hp5500ps, i printed a backlit after one month color changed why?

i had printed a backbite with all original materials (ink, printed heads, materials, lamination) and delivered to client, after 30 days client complained that color changed.
i want to know why? due to what reason

Google is using a visited color (#551a8b) that is hardly distinguishable from the unvisited color (#2200cc), so may not notice it.
Make sure that you keep history.
* Make sure that you do not use [[Clear Recent History]] to clear the Browsing History.
* Make sure that the History is set to at least 1 day: Tools > Options > Privacy > History: "Remember visited pages for at least"
* Make sure that you do not run Firefox in Private Browsing mode (Tools > Stop Private Browsing is grayed, see [[Private Browsing]])
* To see History and Cookie settings in Tools > Options > Privacy, choose the setting "Firefox will: Use custom settings for history"
You can look at these prefs on the about:config page to make sure that you keep history.
*http://kb.mozillazine.org/browser.history_expire_days (180) (also affects saved form data)
*http://kb.mozillazine.org/browser.history_expire_days_min (90)

Similar Messages

After one month of fine usage, my iPhone cannot connect to or recognize any cellular network.

After one month of using iPhone 4s w/o any problems, it started to go off and on from cellular network. Now it is only "Searching..." for networks unable to connect. When I switch off "automatic carriers" it's the same. I already tried to swith off/on airplane mode and device but w/o success. Help, please...

I too are experiencing the same problem on a 8gig 3G Telstra Australia iPhone that was bought outright. I also have another (same) iPhone and the settings on both are identical yet the new phone refuses to connect. I have tried a few ideas/suggestions including: settings, general, network, cellular data network and changing it from telstra.iph to telstra.internet. this works but I think something is wrong because to .iph refers to iPhone (I have switched it back until to confirm with telstra about this).
I have also tried settings, reset, reset network settings but this did not help but has worked for others.
I have also tried turning off the unit and taking out the sim card and restarting the iPhone but again no luck yet.
I plan to speak to both Telstra and Apple to see if this problem has a simple solution and will post a new thread titled "solution to cellular network problems".
Personally by all the trials and errors so far I believe it is a carrier problem and having to re-enter the pin on this phone everytime I re-boot it suggests it could be sim card related.

Z10 / BB!0 - Exchange Mails will be auto deleted after one month!???

hi,
i have a big problem with my Z10. after one month of use, i detected that ALL mails (sent mails also) are auto deleted from my exchange accounts which are older then one month!? i don´t find general settings to deactivate this STUPID setting!
I´m verry angry, because I loose hundreds of mails from 4 diffrent exchange accounts!!!
thanks for some hinds to avoid this in the future.
BR david

Hello Komanaut and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your email.
To clarify, are the emails deleted off your device and your email account on the computer? Or just on your device?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT4571 Can I cancel service after one month

IIf I sign up for Internet with my Verizon account ...can I cancel after one month of service

Verizon has been permitting month-by-month data cell plans for iPads, unlike iPhones that cannot go in and out of service.

HT204053 iPhone 5s replaced after one month at apple store. They started restore and it is still restoring after 24 hours.

iPhone 5s replaced after one month at apple store. They started restore and it is still restoring after 24 hours. What can I do?

If you feel the restore process is not progressing, all you can do is stop it and try again. To stop the restore, go to Settings>iCloud>Storage & Backup and tap Stop Restoring iPhone at the bottom. Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens on the phone and when given the option, choose Restore from iCloud Backup and follow the prompts. Be sure your phone is connected to wifi and your charger while it is restoring the backup.

Duplex printing stoped working after one of the recent updates.

Hi,
For some reason my HP Laserjet P3015 stoped printing duplex. Some dialogs show the "beidseitig drucken" option and I can check this and get duplexing. But I configured duplexing in the HP printer settings and it is ignored. I had system settings from earlier times with the option enabled but they seem to not work any longer. So how do I set up a printer to print duplex from all applications?
Thanks for helping me saving trees!
Best
Stefan

It is possible to set duplex as the default setting via CUPS - the core printing system used in OS X. Using a web browser you open an internal web page, select the printer you want to modify, make your changes and then save this as the default. Then when you print, this setting will stop you from having to access the driver menus.
But there is a caveat to this setitng being used and that is based on the application being used. If the application uses or involves the default print dialog in the print job submission, then you will get a duplex print job. But there are applications that bypass the default print dialog and will therefore submit the print job without the settings you have set. The Print icon in Word for Mac 2011, part of the MS Office 2011 suite, is an example of the print dialog and thus the default settings being ignored. But if you select File > Print in Word, this will invoke the print dialog and your defaults will be honoured.
To access CUPS, open Safari and type
http://127.0.0.1:631/printers
Note that for OS X 10.8, the CUPS page is blocked by default. To enable it, open Terminal and type "sudo cupsctl WebInterface=yes" (without the quotation marks). Enter the admin password when prompted and then refresh the browser view.
With the CUPS web page open, select the printer you want to modify. Then from the Administration drop menu, change to "Set Default Options".
This will show a new page with some menu headings (links). You may have to check each one but one of them will have the duplex (or two sided) setting. With the option selected you then need to scroll down the list to the bottom of the page where you will see the ‘Set Default Options’ button. Click this and you will then be presented with an authentication window. Enter the account name and password that has been set as the admin for this Mac. And then press the Log In button. You will then see another page stating that the information change is completed.
You can now check that the change has been successful by selecting to print this page from Safari. With the correct printer selected, change to the relevant menu to ensure you modification has worked.

HP Officejet once was set up wireless, and worked, after one month, it will not connect to router?

I have been working with this new HP all in one wireless printer, and was working great, then one day out of the blue it stopped. I can't print out a thing, and when checking on why it stopped, it first printed out that it was not connected to the radio connection, which I thought was Bogus, then after working on it a little more, I went to the wps on the router and held down the WPS, as was requested for 3 seconds, but when I returned to the printer, it all looked as though it was downloading until it got down to 7 seconds, then it stopped and refuses to connect to the router. Does Anyone have any Ideas on how to fix this issue or, tell me what I maybe doing wrong???? This is Now driving me insane. I am connected to an HP Computor, it appears that the router maybe the problem, so I need HELPPPPPPPPPPPPP! Please, thank's to anyone who can suggest the right fix for this printer.

Hello thesuperdude,
Welcome to the HP Support forums. I gather that you have run into several issues with your Officejet printer since you received an error about the radio connection.
To better understand the issue, please provide some further information:
What make/model/product number of HP printer do you have? Guide to finding your product number
How is the printer connected now (USB cable, ethernet, or wireless)?
Are you getting any error messages? If yes, what is the error message and where are they being displayed?
Is the printer plugged directly into a wall outlet?
What operating system are you using on your computer (Windows 7, Mac 10.8, or Windows 8, etc)?
Have you installed the full feature software and driver onto your computer?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Plastic coating tears off after one month light use

Does anyone have problem with the coating (the plastic edge that goes around the front screen rathet than the sides) coming off or peeling after couple months of using? Purchase mine a month ago in early October and notice both bottom corners paint/coating peeled off or came off. It made this almost brand new phone looks undoubtfully cheap! Trying to mediate with the local customer service, but they claim the damage is caused by scratches which is not bound by Sony warranty but my phone is abosolutely scratch free everywhere around where the peeled coating area is. So frustrated as I sold my Sony Z2 to get this and didn't expect such cheap quality compare to the aluminum housing Z2 had.
Please share if you had similar experience and it would be great if someone from Sony Global can respond to this. Not happy at all and probably will not pick another Sony phone especially those with the plastic coat on!

Thanks. Sony CS showed me one of this printout as their "evidences" showing the coat wore off was caused by scratches. To me the plastic coat looks like it got heated up (by the phone or either my firmed grip?) and stretched (there are white stretches mark circled by me that looks more like its been torn off rather than scratched off).
I am not convinced as there are little or no physical scratch mark on the screen especially when I have a protective sticker on which picked up little or no scratches, while it shows no scratches at all on the side bezel. Moreover, the way CS described it as they used their machine to estimate and confirm the peeling were caused by scratches and when I asked them to show me evidence of stats they say they are unable to provide, which sounds completely ballic.
I demand them to run a heat test on the phone to see if it affects the plastic coating meanwhile and ask them to provide relevant stats to back their finding on the so called scratch marks they claimed... will see what happened in a couple of days.

Crystal Report stop working after one month

Hi all,
I have downloaded crystal reports 2008 for SAP business one from the SAP service market place on 01.11.2008 and installed at customer site on 21.12.2008. We also developed and delivered 6 report template to customer using it.
These all 6 reports were working fine till yesterday.Suddenly from today morning (21.01.2009-exact one month after installation) all these 6 reports has stopped working.
Can anyone tell, why it is behaving like this ?
BR
Samir Gandhi
Thread moved by: Darius Heydarian on Jan 21, 2009 1:54 PM

Hi,
I think you downloaded the trial version, you need to buy it now.
Cheers
Shahid

Outlook 2013 downloaded from 1 and 1 as part of an Exchange subscription requests activation after one month.

I have the following problem with 1&1: I had the Office 2010 pack with Outlook 2010 . When I subscribed to hosted Exchange with 1 and 1 and downloaded Outlook 2013 (32 bits since 64 bits is not compatible with Office 2010) it worked perfectly
well and replaced 2010.
Now a little bit less than one month after it asks me the activation.
1&1 support doesn't understand yet. They asked me to download again but it did not solve the issue.
Any idea

Hi,
Based on your description, you are not using Office downloaded from Microsoft? Could you please let me know from which site you downloaded Office?
I only suggest you download Microsoft Products from the official site. I don't recommend you use our products provided by any 3rd-parties.
Consider to purchase our products from Microsoft Store:
http://www.microsoftstore.com
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

After one month or more with out .mac working, can we get our money back?

It has been over one moth with out iweb working properly, I dont care of getting back the money of iLife, but yes to the money I am paing for my .mac account since It has been over one month that is not working and the only reason I have it is for my personal web site that is my work portal, everithing I do (Photography & Film) has to do with interactive web page, so Has been more than a month that I can't give my clients what they pay for and is really bad apple is not doing a thing.
Ye s we have read a lot of postings that the problem is being fix as we think, but really that has been the case since a little bit more than 15 days and as today we have not seen a think fixed, still iWeb don't publish and we have tried everithing apple and users told us and still not a single good renponse.
iWeb 2.0.2 was the worst upgrade from an apple software ever, can we get our .mac accounts money back so we can go to a better service?
Sincerely, Adolfo Pardo: (www.cinematograf.com

Actually when my account expires on April 18 2008 I am not renewing, any more If I don't get my money back soon I will cancel then my account and move to a more stable company, probably rapidwever or to a host way more stable yahoo or someone who hears the customers and has 24/7 service for errors on their system.

Touch screen (digitizer) not recognizing stylus taps after one month

I am sorry if this not the right place to post my concern.
My palm touch pad does not pick up the signal and is random with it's sytlis....I have only had it for less than a month. Where do I send it for repairs? I need a number that does not put you on hold for lengthy time periods. I call yesterday and was on hold forever and finally had to hang up. I have now bought a hard calendar so I don't miss appointments. THanks please advise as to how to resolve this problem. Melody
Post relates to: Palm TX
Message Edited by smkranz on 08-13-2008 12:51 PM

Hi, and welcome to the Palm Community Forums.
Sorry to hear you have not been able to reach a Palm agent for your repair. Unfortunately, you do need to initiate a warranty repair by phone. This page lists all contact numbers for Palm Customer Care:
http://www.palm.com/us/support/contact/contact_us.html#product
The agent will probably walk you through a series of diagnostic steps including a Hard Reset. They will also ask if you have a screen protector installed.
There is a lengthy thread at the top of the Hardware board about resolving digitizer issues...you might want to run through that before determining that the screen is defective. Sometimes, a corrupt file or third-party application can cause the digitizer to behave erratically.
Post relates to: Centro (AT&T)
Message Edited by smkranz on 08-13-2008 12:54 PM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

My nano shuts down after one minute of use, why? Brandnew

My nano shuts down after one minute of use and it doesn't matter if I'm using the radio or playlist. This is brand new so I've only ever listened to 1 minute of a song. Help

Kevin,
This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
B-rock

Acrobat does not work after one month

Recently I reinstalled OS in my computer, of course with installation of Adobe CS6. and the acrobat stopped to work after about one month while photoshop and others work as usual. I would sincerely appreciate if someone could tell me how to fix it.

Hey claudes1837819,
Could you please let me know what version of OS are you using.
For Windows, you might refer the KB doc link mentioned below:
Doesn't launch after 30 days | Installed as part of a CS6 suite
Hope to hear from you.
Regards,
Anubha

I I made a PDF fie to preview, but am still apprehensive to actually order the book, as I have ordered some prints of photos after I thought i had them cropped correctly and prints returned with heads, half of bodies have a book formatted and ready to buy

I have formatted a photo book, but am apprehensive to push the "buy" button as I have ordered prints that I thought were cropped correctly, and they returned with heads cut off and half of bodies mising. I have put the book on a PDF file as instucted, please reassure me that if everything looks right there, that is the way the book will look??

If the PDF looks good then the printed copy should be OK. The only problem you might run into is the color rendering. As long as none of your photos use the sRGB profile and not the Adobe RGB color profile the color should be fine.
On those prints that were cropped incorrectly: did you copy them to the print size ordered before uploading for printing? If not then they will be cropped by the printing equipment and you'll lose part of the top and bottom of the print (for landscape prints).
OT

I have hp5500ps, i printed a backlit after one month color changed why?

Similar Messages

Maybe you are looking for