I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

MacBook Pro
MacBook Pro Apple Support
Apple Support Lion
Lion Mac OS X Communities

Similar Messages

No Matter what I do I can't get safari to open the following link

http://glb2.warriorgeneral.com/game/replay/3467/633355. I am not sure why and the site designers are not sure why it won't work for safari but it will work on ios Chrome and ios dolphin

Okay. If iTunes is endlessly saying "Accessing iTunes Store", let's first try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death" any suggestions?

purchased Lion, installed it - once I log in - i get the curtain and message to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions to hold the power button till it shuts down. Worked with the disk repair utility - fixed permissions - still can't get past the "black curtain of death" any suggestions?
My machine was patched to date 10.x.x. I was lucky to get an internet connection and I selected the option to re-download Lion... its curruently being downloaded. What if that doesn't work?
Any thougths would be appreciated.
Joe

And you have a workstation? not a notebook.
Usually a driver or hardware, nothing that Disk utility will fix.
You know of course what a Prohititory Sign is?
prohibitory sign, kernel panic
Forum devoted to Lion:
Mac OS X v10.7 Lion Communities
Tips and FAQs
FAQ kernelpanic
Resolving Kernel Panics
Avoiding eliminating Kernel panics
Lion App Compatibility Table - RoaringApps
RoaringApps Mac OS X Lion Application Compatibility
did you make sure your apps, drivers, and hardware support Lion?

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

Run Disk Utility located in /Applications/Utilities before trying to upgrade to Lion in case the startup disk needs repairing.
Using Disk Utility to verify or repair disks

When i open the organizer for elements 12 on my mac...i can not get to top of screen....help

when i open the organizer for elements 12 on my mac...i can not get to top of screen....help

Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

I just opened my new Mac Pro and I have a USB keyboard, not a bluetooth -- it doesn't recognize the USB keyboard and I can't get past the "bluetooth keyboard pairing" screen.

What specific KB?
Do you know it works?
I set my 2103 nMP with an older (black) Apple USB KB and it worked fine

I can't get past the Gray apple screen during start-up Help!!!

I went to open my system pref. folder and when it wouldnt open I restarted it and now I can't get past the first screen of the Gray screen with the apple in the middle and the little spinning circle under it. Can anyone help me? have had several problems with this computer!!! I just had to have a whole new harddrive put in about a month ago.
powerbook g4 15 inch Mac OS X (10.4.8)

Welcome to the Discussions!
The first thing to do would be to boot from your original Disk 1 by:
1. Inserting the disc, pressing the power button, and immediately after the startup chime, press and hold the C key until you see the spinning gear icon appear on the grey splash screen.
2. After the machine has booted, pick your language, and when the Installer window appears, do not press Continue, but go to the Utilities menu in the menubar and open Disk Utility.
3. In Disk Utility, choose your normal startup volume in the pane on the left and then click Repair Disk. If any errors show in the window, run Repair Disk again until you see 'The volume appears to be OK' in green.
4. Quit Disk Utility, quit the installer and attempt to restart into your regular startup volume.
Please update your profile so we have a clearer picture of your particular machine.
Joe
<img src="http://homepage.mac.com/joeuu/.Pictures/groundzero5.jpg"width="20"

I can't get past the grey apple screen using mavericks

I can't get past the grey apple screen trying to boot up with Mavericks. I had been using Mavericks for about a month (only had issues of freezing occasionally). I read in one of the posts here that I should try holding command R down when booting. I did now I just get a grey screen without the apple. Any advise?
I have a Mac Mini

Hello ther cnickers,
It sounds like the initial install of Mavericks went ok, and you have been using it for a while, but now cannot boot to your desktop and are stuck at a gray screen with an Apple logo. I would recommend a couple of things here:
First, try performing a Safe Boot to see if that will load up for you. If so then leave Safe Boot and restart from the Apple menu to try and get to your deskop:
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
From: Mac OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
If that works fine, I would next also verify and repair your disk if needed.
Disk Utility 12.x: Repair a disk
http://support.apple.com/kb/PH5836
Print this help page so you can refer to it later. (You don’t have access to Disk Utility Help when you restart up your computer in the next step.)In the Disk Utility Help window, choose Print from the Action pop-up menu (looks like a gear).
Choose Apple menu > Restart. Hold down the Command (⌘) and R keys as your computer restarts.When you see a white screen with an Apple logo in the middle, you can release the keys.
Click Disk Utility, and then click Continue.
In the list at the left, select the item you want to repair. (Be sure to select an item that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.If Disk Utility reports that the disk appears to be OK or has been repaired, you’re done. Otherwise, you may need to do one of the following steps.
If Disk Utility reports “overlapped extent allocation” errors, two or more files occupy the same space on your disk, and at least one of them is likely to be corrupted. Check each file in the list of affected files. If you can replace a file or recreate it, delete it. If it contains information you need, open it and examine its data to make sure it hasn’t been corrupted. (Most of the files in the list have aliases in a DamagedFiles folder at the top level of your disk.)
If Disk Utility can’t repair your disk or it reports “The underlying task reported failure,” try to repair the disk or partition again. If that doesn’t work, back up as much of your data as possible, reformat the disk, reinstall Mac OS X, and then restore your backed-up data.If you continue to have problems with your disk, it may be physically damaged and need to be replaced.
Thank you for using Apple Support Communities.
Cheers,
Sterling

HT4623 I can not get past the license agreement and term and conditions page after updating my i5 IOS

I can not get past the license agreement and term and conditions page after updating my i5 IOS

Restart your phone and if that doesn't help, reboot the device.
Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

Can't get past the licensing screen in Premier Element 10. I've had the program for 2 years with no problems at all. Suddenly the licensing window shows up and won't go away. AMD processor - ASUS MOBO - Win 7x64

Out of the clear blue - the Premier Elements Organize "Licensing Agreement" shows up on my screen. I click "Accept" - it goes away - and within 5 seconds pops up again. I can't get past it. I've used the program successfully for over 2 years. Anybody else having this problem? I use Win 7 x64, I have TONS of disk space (read over 570 GB free on "C Drive"). I have 12GB of DDR3 Memory. I'm using an AMD 6 Core processor with an ASUS mobo. All other programs work fine including several other Adobe programs.

jazztrptman3
Thanks for the follow up. Sorry the news is not better.
Have you done a Tools/Error Checking for the Local Disk C?
Then, maybe
In your uninstall/reinstall troubleshooting, have you
a. uninstalled using the usual Control Panel route
b. did a ccleaner run through with its regular and registry cleaning parts
CCleaner - PC Optimization and Cleaning - Free Download
c. reinstall with antivirus and firewalls Off.
I have been doing some searches....any chance you have a RAID configuration change in your computer environment?
Can you right clicked the program desktop icon and select Run As Administrator? If so, please do so. Are you still running the program from a User Account with Administrative Privileges?
You might want to take a look at some of my encounters with activating Premiere Elements and see if there is anything in that which applies to your situation.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Is your input that you can get paid technical advice from Adobe Tech? I am not sure if it offers (even for a fee) troubleshooting for earlier versions.
Please update us on your progress when you get a chance.
Thanks.
ATR

Rebooting old mac g5: Can't get past the grey screen.

This problem concerns an old mac g5 that I had replaced three years ago because it hadn't been working properly. I am getting it out because my son needs a computer and I was hoping that the thing would work for a little while.
I can't get past the grey apple screen. I have the installation disc in and restart while pressing the c. I just am not getting any further than that. The fans begin to sound like a jet taking off. I have tried resetting the pram while starting up, but that doesn't seem to be working either. I have heard about a hair dryer trick and don't really know what is supposed to get warmed up by that.
Does anyone have any suggestions?
Thanks.

No hair dryer. What you need to do is make sure the PRAM battery is new. It is a coin shaped battery on the logic board. Radio Shack sells them.
Option key booting sometimes works. You have to us a Mac OS X 10.5 or 10.4.6 retail disc, which are black with a white X logo, and do not say Update Dropin or OEM on them. If you have the original iMac G5 disc that's fine, but web browsing with older operating systems is not very friendly. Some of these machines were known to have leaky capacitors, and getting the power supply replaced on them now would be quite hard because of the age.
http://www.ifixit.com/ may be able to help if you suspect that.

On my wife's iPad mini I can't get past the screens accepting the software license to upgrade over WiFi

On my wife's iPad mini I can't get past the screens accepting the software license to upgrade iOS over WiFi.
Works if I do it over iTunes on my desktop.
I get the screens to agree to the software license (twice) then it sits there until I get impatient. like 30-60 seconds. Have tried a hard boot but have to connect it to the computer each time. Latest was when I upgraded to 8.2

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

How do I skip upgrading itunes? I used to have an option, now I can't get past the upgrade for free screen!

I have been trying to access the itunes store for a week now but can not get past the screen to upgrade for free. I do not want to upgrade, I tried but can not install the free upgrade because I am using 10.2.2. I do not want to upgrade I just want to get to the itunes store... how do I get past this screen? There used to be an option to skip the upgrade.

I have an iMac G5 with a pre-Intel processor. My current OS is 10.4.1. When I open my iTunes store function, I get an upgrade to iTunes 10.5 page that does not allow me the opportunity to refuse the recommended upgrade and I don't want it because my processor is not the Intel processor. I can't get past this page to access the iTunes store. I can't find iTunes 9.2.1 online to download, if that is the only solution. I can't believe Apple is forcing me to purchase a new iMac in order to continue using iTunes on my current iMac. I'd like a good answer and solution to this problem.

Can't get past the white screen at start up

I can not get past the white screen when it starts up. It will chime and then stay at the white screen. I have replaced the hard drive, memory, battery. I have reset the PRAM and the SMC.

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

I installed Lion OS, after restart it gives the startup screen with my user id but no window for password entry, no matter what I do I can't get past the opening screen.

Similar Messages

Maybe you are looking for