I just learned after purchasing the Creative Cloud that my OS is not supported by the Cloud.

Can I download a program to my Windows Vista system to use my purchase or do I have to break down and go buy a new laptop?
ty
Spamandrice1

Vista is not a supported OS under Creative Cloud anymore.
Here is a link to an Adobe discussion on a POSSIBLE workaround I've been working on. http://forums.adobe.com/thread/1453104
Key is to open up all the Adobe products you wish to use first. Even then, the 64bit versions of Bridge and Photoshop won't work.
You can also buy a copy of Windows 7 and upgrade your OS or buy a new computer. These are the alternative fixes.
FYI, what the worthy Adobe Staff Member was referring to was downloading and BUYING the boxed CS6 versions of Adobe products. This is in no way applicable to your Creative Cloud subscription. Creative Cloud applications are available only through the Adobe Application Manager, there is no other way to download apps under Creative Cloud except by that method.

Similar Messages

I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

I have an ipad air and I'm trying to play a video I purchased from iTu and it says cannot open not supported and the codec says protected. How do I fix?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: mailto:[email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
https://reportaproblem.apple.com/
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Getting Refunds for your iTunes Store Purchases
http://www.labnol.org/software/itunes-app-store-refunds/13838/
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos?

I have an Apple Air Book and I am very satisfied with it except there are video that I cannot see. The reason is that Quick Time will not support the video. What can I do to be able to get these videos? I have all ready download Adobe Flash Player and installed it but it has not effect.

Get Flip4Mac (for Windows Media videos):
http://dynamic.telestream.net/downloads/download-flip4macwmv.asp?prodid=flip4mac wmv
And Perian for everything else:
http://perian.org/
You should be able to play most videos with QuickTime player once both are installed.

ERROR: Update mode C is not supported by the extraction API - R3 11

Hi gurus,
I just tryed to implement the solution I found at this link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
The data source is based on an Infoset on the KONV R/3 Table.
I setted the AIM delta process and I did all the activities as written in the document.
The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
The "initialize delta process" (with data) doesen't work and returns the following error:
Update mode C is not supported by the extraction API
the error code is R3 11.
have you any idea about it???
Thanks!!!
Regards!
Matteo

Hi,
for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
regards
Siggi

How to solve "this type of file is not supported, or the required codec is not installed"?

Hi all,
I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
Here is my new computer information:
Model: Del Inspiron 3847
Intel Core i5-4460
CPU @ 3.20 GHz 3.20 GHz
RAM 8 GB
System type: 64-bit, x64-based processor
I hope someone can guide me. What do I need to do to solve this problem?
Thank you.
Message was edited by: Janie Christensen Ficara

StreetSongs
Thank your for the information supplied.
But, what are the properties of this .avi file that you seek?
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
Pixel Aspect Ratio
Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
AVCHD.avi
MotionJPEG.avi
XviD.avi
DviX.avi
other
There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
point us to the actual situation, and we will plan troubleshooting strategy from there.
ATR

"function is not supported by the current version of the backend server"

Hi,
I just updated SAP business one with latest 8.81 patch 10 and related integration component. However, when I try to add a sales order using new 1.5 version of the mobile app, it give the following error:
"Note that this function is not supported by the current version of the backend server".
Any idea what this means? Do I need to update the integration component with a different version?
Thanks

Hi Jose,
please refer to this SAP Note [1602674 - SAP Business One for iPhone and iPad - Troubleshooting Guide|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3030303136303236373426]
Note: you need to use your S-Account to access this note.
regards,
Fidel

Adobe Premiere Elements 12: This type of file is not supported, or the required codec is not installed

Hallo! I use Adobe Premiere Elements 12 on my computer (PC, windows 7). When I try do re-open my projects on Adobe Premiere Elements I get the message: This type of file is not supported, or the required codec is not installed. The file type of my saved projects is: Adobe Premiere Elements Project (.prel). The same happens when i try to re-open the auto save files. This is very annoying because I losse all my earlier work. I would be really grateful for help. Best regards, Stefan

With the QT Player installation, you should have Apple's H.264 CODEC.
Maybe this ARTICLE will give you some tips on the GoPro footage.
Good luck,
Hunt

Shfsmount: shfs filesystem not supported by the kernel

I installed the shfs package through pacman, and there is a sshd running on the server. However, once I enter the command
shfsmount -P<port#> <user>@<server>:/var/www ~/websites/<server_name>/
(with the values in <> replaced by the appropriate values of course), I am able to enter the user's password and then the following error shows:
shfsmount: shfs filesystem not supported by the kernel
I have done some web/forum searching and have not found anything that helps. I have tried to build the shfs package through abs, but it seems to use an older kernel version (2.6.22) than I have (2.6.27) and the makepkg command errors out with a location-not-found type of error.
I would like to know if there is something in the abs files I need to change for it to use the correct kernel for building, or whether there is a way to get the repository package to work.
I look forward to your responses, and thanks for your time.

Well, using the sshfs method did work. However, shfsmount still returns the same error. When I installed sshfs, it also pulled in fuse, but doing
modprobe fuse
does not change anything that I can see. Is sshfs the same as shfs? They seem to be two different packages.
Also, I am using Xfce with Thunar as my file browser. When I do the sshfs method outlined in the wiki link above (which does work), Thundar acts like the folder where the mounted stuff is does not exist. When I hit refresh, the <server> folder will show up for a second, then dissapear. When I go through a text editor and open a file from there, the file opener can see the folder with no problems. I can look around in there with the terminal as well. Is there a way I can get Thunar to view that folder?

Hi, I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

I just purchased Adobe Illustrator and I cant find the serial number. When I try to download using Cloud it says it does not support my computer system. Just yesterday I finished my trial. What shall i do?

To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
http://helpx.adobe.com/x-productkb/policy-pricing/serial-number-retrieval-process-faq.html

TS3623 I have been using apple TV for a 2+ years now an I just purchased several new TVshows that started in Sept 2013. In the past shows I have not yet watched had a green dot by them, but now this does not exist and i forget which show i have already w

I have been using apple tv for 2+ years and i just purchased several new shows that began in Sept 2013. In the past, episodes I have not yet watched were marked with a green dot, but now that dot is not there.

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others

My 822 now says, "ERROR: Unable to find bootable option. Press any key to shut down." Just happened after my phone froze. Everything I've searched says to replace the phone. I have no phone in or out, no alarm....what is going on with this? I see others have the same problem.

Just got the same error message today. My phone went to the black screen of death with the error message at the top. Contacted Verizon via chat. Was online for 1 hour and 15 minutes only to find out that nothing could be done which I could have told them based upon what I had read on this site. Of course my phone is out of warranty since I have had it for 1 1/2 years and I am not eligible for an upgrade. How convenient! I was told to contact Nokia which I did and they gave me a download to try to reset everything. It looked like it was working but after almost 3 hours it got to the end and nothing happened. It just froze even though it said it was done. I rebooted the phone and am back at the same black screen of death. Guess I have to buy a used phone and then will have to reconsider whether or not to stay with Verizon going forward. I have not had any issues with the phone in the past - keep it in an otter box, never dropped, never got wet, etc. But all of a sudden it goes haywire like this that seems like either a hardware or software problem but something completely out of my control and all I get is sorry, you're out of warranty!

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itsel

I installed the new version of LIghtroom (2015) from Creative Cloud. Creative Cloud says I successfully installed the new version. However, the shortcut icon that was installed does not start the new version. I've also gone to the properties link itself but, no success in starting. How do I launch the new version?

Thank you, toinimj59. I did this part and the installation completed (apparently it didn't earlier--included an acceptance of the standard terms and conditions...
Solution 1: Sign out from Creative Cloud desktop app and sign back in
Sign out from, and back in to, the Creative Cloud desktop app. Click here for instructions
Launch Lightroom.

I just learned after purchasing the Creative Cloud that my OS is not supported by the Cloud.

Similar Messages

Maybe you are looking for