I just recovered my T40 to factory settings and now it wont connect to my wireless WPA connection...
help
Welcome to the forum!
Can you please post the 7-character model number of your T40 to help us help you better, it should be something like 237x-xxx?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.
Similar Messages
-
I have recently restored my computer to original factory settings and now it wont recognise my ipod.
How can I now get my ipod to be recognised by my computer again and most importantly how can I store my music in the itunes library? Each time I try I get a message that says an ipod can only be synced to one computer at a time and if I go ahead I will lose all my music in my ipod. What can I do now?????
Just have to give it some time. The activation and verification servers are all slammed right now 'cause of all the people trying to update at the same time. Give it a couple hours (or overnight if you can wait) and it should sort itself out.
= L.I. -
I restored my ipod touch to factory settings and now i can't get it to do anything. What do i do?
I restored my ipod touch to factory settings and now it won't do anything. I need help to get it restarted
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy... See Here...
http://support.apple.com/kb/HT1414 -
I restored my iPhone 3 g to its factory settings and I tryed to connect it to iTunes on my laptop and it said This iPhone cannot be used because the required software is not installed. Run the installer to remove iTunes. Then install iTunes again. HELP!! PLEASE!! Because I cannot get on my iPhone!!
Hi, Mommacat26.
Thank you for visiting Apple Support Communities.
This usually means that a required component is missing. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Removing and Reinstalling iTunes and other software components for Windows XP
http://support.apple.com/kb/ht1925
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
If the issue persists, try installing the Apple Mobile Device Support driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows XP or Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
HT5569 i had the ipad reset all factory settings and now I cannot get on wifi please help
I reset the factory settings and now I cannot get onto the wifi
Hello Lionsroar1988,
Thank you for the details of the issue you are experiencing with Wi-Fi after restoring your iPad. I recommend the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
After installing new itunes version why would I have to restore my ipad to factory settings and now it is doing nothing. itunes won't work ?
Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??
-
My daughter has an iphone 3gs and it required an update. So i connected the iphone to itunes for the update and the iphone locked up . I had to reset the iphone back to factory settings and now the iphone will not activate , Please advise what i can do to get this working for her ?
Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>About=>Carrier?
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743 -
I have a Iphone 2 bought several years ago from the us, and used it in romania with a romanian number and in the uk. I think it was unlocked in the us by iphone. I did a stupid thing and I reset the phone to the factory settings and now I inserted a lyca sim and it says that The sim card inserted does not seem to be supported. please help me!!!
I'm assuming you're referring to the original iPhone.
More than likely, it was jailbroken or hacked to unlock it.
In the US, all of the original iPhones sold were locked to AT&T. AT&T did not offer unlocking at the time.
The best case scenario is that it has now re-locked to AT&T. Luckily, AT&T now offers unlocking. All original iPhones were sold at full retail. They were not subsidized.
Submit a request here and see if they will unlock it. https://www.att.com/deviceunlock/#/ -
I have an iphone 3gs. It was jail broken. I reset it back to factory settings and now all i have on the screen is the apple logo.I have hooked the phone upto itunes but nothing is happening. What do i do? Can someone help please???
Sorry, due to the Terms of Use problems with jailbroken devices can't be discussed here.
You can only get help from those people who told you to modify the software, only they know what the jailbreak did to the firmware. -
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
GratefulIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over. -
Hi
Unfortunately I bought a 4s Apple to return the phone to factory settings and now I have the wrong password only I would input password.
Please can you help me.
thanksIf you don't know the passcode but have synced with iTunes before while the passcode was set on it, you can back it up then restore it in iTunes on the last computer it was synced with.
If you haven't synced it while the passcode was set on it, or if you don't have access to the last computer it was synced with, you'll have to force it into recovery mode and restore it as explained here: http://support.apple.com/kb/ht1808. Then restore to an existing backup if you have one; if not, you'll have to restore it as a new iPhone and start over. -
I restored my factory settings and now its saying i cant activate my phone can anyone help?
i restored my factory settings and now its saying i cant activate my phone can anyone help?
Do you have a SIM in it? Was it hacked or jailbroken to unlock it?
-
I recieved an apple ipod touch 2nd generation as a gift and they have reset it to factory settings and now it is stuck on a screen with an adaptor showing with the itunes music symbol at the top of the screen.
Restore...
Connect via cable to the computer that you intend to use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
It is a 64 GB Iphone 5s and I am running Windows 7 x64 on all of my pcs.
I just got an iphone 5s and now it wont connect to any of my windows 7 PCs, it just gets detected as an unknown device and is unable to be detected correctly. It was connected to one windows 7 pc about a week ago and worked but now I tested it on 4 other computers including a macbook running osx and it isnt detected. I tried the whole Apple Guide and it was no help.install the latest version of itunes
-
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
i just updated the ios on my iphone4s and now i cannot connect back to my home network ... my network pass is still the same but it keeps saying unable to join network
Maybe you are looking for
-
Every time I save a file it copies it to the desk top as well.
Every time I save a file to either the internal drive or an external drive, it also saves it to my desk top...must be a preference somewhere to turn off but I can't find it.
-
Planed order type NB instead of LA during MRP Run
Hi, All my components are externally procured and I maintained planned delivery time for scheduling purpose. But system is automatically picking the order type LA which is inhouse production when I am running MRP. What setting I need to make for MRP
-
Error 90208:does not support the minimum OS version specified in the info.plist
I bulit my app by using Flash Pro and the build is OK with my iPhone4. But when I uploaded ipa file, the error was shown as above screenshot. I have no idea how I can solve this.
-
Want to assign a value to a dff (from a sql )whenever the record is saved
Hi I am new to OAF and would like to know how can i extend my VO and assign a value returned by a sql which returns a value on the basis of some fields from some fields in the same VO . Thanks Narinder
-
Triggering Notification When Sales Order is entered
Hi Gurus, I wanted a notification to be trigerred to my boss as soon as i enter my sales order, Is there any possibility for defining approval limits for a sales person, so that above that limit he is not able to book the sales order, and automatical