I'm having several multiclip issues.
Hello - I'm hoping someone with more knowledge than myself about FCP 7's multiclip function could help. I shot an acoustic duo performing the same song (the song was pumped through speakers as they played along with it) and did about 11 takes. This enabled me to get some wide shots, close shots, guitar shots, etc. The shot was done with a Canon Vixia HF S100 & Vixia HF S10. Same modes, same everything.
First Issue:
When I drag more than 4 clips to the timline, it's asking to render. Why? It doesn't matter which clips I bring in, if they are more than 4, it asks to render.
Second Issue:
When I use PluralEyes to sync, it syncs the clips fine. Again, it's asking me to render!?
Third Issue
I then drag the newly created multiclip file into the "Multiclip" sequence. Here's the real frustrating part. In order to play all of the clips and select which camera angle I want (thereby creating a marker on the timeline for editing), it will not play the multiclip files IF I have more than 5 clips. It just shows one clip and/or a window that says UNRENDERED.
What am I doing wrong? If I do this with 5 or less clips, no issue, however, if I do it with 6 clips, I get the below issue:
Here's how it looks with 5 clips! (which works)
>When I drag more than 4 clips to the timline, it's asking to render. Why? It doesn't matter which clips I bring in, if they are more than 4, it asks to render.
Well, that's not how you do Multiclip in FCP. It is ONE way, but not the way to use MULTICLIP. Look in the manual for that. What you are doing now is STACKING the clips. Now, what will make the renders go away...FAST STORAGE. It is needing you to render because whatever drive you have this footage stored on, can only play back so many streams of video...layers of video...at the same time. It will hit a wall. eSATA...MiniSAS...those are faster options. You will not get 11 streams with firewire. And it seems you have issues with four....
>When I use PluralEyes to sync, it syncs the clips fine. Again, it's asking me to render!?
Ah...yes, PluralEyes will stack. And the reason you have to render is what I stated above. Media Drive speed.
Third issue...same thing. Drive speed. That's your bottleneck.
Similar Messages
-
I am running on OSX 10.10.1 and have a 2009 imac intel and I am having severe latency issues. I am not familiar with macs as this is my home computer used by other family members. Any help on how to troubleshoot why such latency issues?
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.
I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137 -
Anyone else having to deal with this? im losing faith in apple everyday
It is beyond bad. It is full of bugs, on Windows it freezes constantly when connecting and syncing, it does not sync photos as well as music, even if you tell it to.
What complete idiot at Apple let this piece of s**t get out. iTunes 11 is as buggy as Microsoft software if not worse. This is not why I use Apple and unless it is fixed I will leave Apple and go Android. -
Since installing IOS 6 on both my iPhone 4 and iPad 2, my wifi only works sporadically. If I reboot, it will work a while. Definitely did not have a problem until IOS 6. This needs to be fixed promptly so that users are not charged more by their carriers for not using wifi.
I for one at least am not experiencing Wi-Fi dropping on iOS 6.
Try this..
Tap Settings > General > Reset > Reset Network Settings
You may need to enter your network password.
Then restart the devices.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
And try turning off your router for about 5 minutes, turn it back on. -
Severe banding issue in shadow areas
Short Version: Having severe banding issues in shadow areas in Lightroom. Need to know how/what to set my color profile to to fix this issue. Lengthier description and images below.
I have read several posts here in the Lightroom forums about others who are experiencing the same type of banding issues, but I haven't seen any definitive answers on how to solve the problem.
I was able to take a couple screenshots of the issue that I am seeing. The image looks very different in Photoshop, Lightroom, Windows Photo Gallery, and also rendered in IE7. Screenshots of the image in Lightroom and the image in Photoshop are posted below at a 100% crop of the affected area. The first image is how it appears in Lightroom and the second image is how it appears in Photoshop.
From what I have read elsewhere the problem has to do with how Lightroom uses color profiles. I do not have much experience with color profiles, so I'd like to get everyone's recommendation on what color profile I should be using, and maybe a link to some information on setting color profiles and how to fix this issue. The image looks so much different in Lightroom than it does elsewhere, that I can't see myself being able to trust Lightroom to process my images.
Some info on my setup. Shoot RAW with Canon Rebel XT. Use a Dell with Pentium D running Windows Vista. Monitor is a Dell 2007FP, and currently I am using the Dell 2007FP color profile as far as I can tell.
Screenshot of image with banding in Lightroom
Screenshot of image as displayed in PhotoshopDon, Bob!
I think it is quite obvious that the Eric's problem is not banding per se (and the related cure by fiddling with black setting), but rather about the mismatch between how the file looks in LR's Develop 100% view and how the same file (or an exported file) looks in Photoshop.
Eric!
I am afraid there is no definite answer to this problem. Indeed there are a number of Windows users that have reported this problem. A very exhaustive and inconclusive thread is this:
http://www.adobeforums.com/cgi-bin/webx?128@@.3bc3578d
The bottom line so far seems to be this:
LR on Windows uses Windows ICM to generate how the image looks on the screen, while PS uses Adobe own engine to generate this. Somehow this set-up appears not to work reliably with LR - the on-screen image in LR 100% develop differs from the same file's appearance in PS or other color managed applications. The mystery here is that other applications that seem to use Windows ICM still manage to show image correctly, but not LR. But anyway, the Windows ICM appears to be the culprit here.
The amount of difference people see depends on the complexity of the monitor profile used. LUT based Version 4.0 profiles will be affected worst - not only shadow detail, but the overall tonality and colors may be off. The best match is achieved with simple matrix based version 2.0 profiles - on my machine the mismatch occurs only in deep shadows were I see banding/splotchiness in LR and only under certain Develop settings.
(Incidentallly, on Windows XP (and older) machines one should ALWAYS use ver 2.0 profiles, as Windows ICM does not support ver 4.0 profiles. I also think that Windows ICM cannot handle LUT based profiles correctly. My own experiments showed that using LUT based monitor profile resulted in mismatch between PS CS2 and other applications (like Canon DPP), not only LR. BTW - as you are using generic monitor profile, I can almost bet that it is a matrix ver 2.0 profile (good thing).)
I am curious about the Vista thing though. I had certain hopes that this image appearance problem in LR would be eliminated on Vista, as it uses the Microsoft's new Windows Color System which incororates an updated ICM that now supports ver 4.0 profiles and reportedly has many bugs of the previous ICM fixed. However, if your report is true and the image mismatch is not due to some other factors, then it seems that Vista does not solve this. -
We are having Google Drive issues (some files won't sync) and it's causing us trouble with our business communication. Is there any way to use a Mac Mini to share documents between two people in different areas similar to google drive? Would this just be done through iCloud?
If you use Numbers, Pages and KeyNote it si very easy to sync those document among all the Apple devices. You need montain Lion on the Mac and at least iOS 5 on the mobile devices.
I show those document on my Mac, iPad 4 and iPhone 4S -
HP PhotoSmart 7510 suddenly has severe connectivity issues
I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not. -
I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?
I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!
-
Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider -
I have several unrelated issues.
1) My computer recently started failing to startup. It flashes an image of a globe, and then an image of a finder folder alternated with a questionmark, and then, if I'm lucky, proceeds to normal start up. What is going on? How can I fix this?
2) My computer has started making noise when it is not doing very much. It makes the noise as if it is busy/overloaded, but it does it even when only one page in safari is open (no other applications are opened).
3) My computer has been very slow since my installation of VirusBarrier x4. It usually operates at normal speeds, but sometimes (even when virus barrier is not running) it moves slowly and loads pages in safari at an extremely low pace. Also, when sending files/folders through iChat, the transfer is rapid, but when receiving files/folders, it is excruciatingly slow and often fails. Is there any way that I can clear some memory? I definitely have plenty of memory left as this computer was purchased this past summer.
4) My battery is having trouble charging/staying charged. I have heard that re-calibrating may help, but so far it has proved unsuccessful. The battery often jumps from being very charged to less charged to very charged again without being plugged in nor used very much.
Is anyone having similar issues? Any help would be greatly appreciated.
Powerbook G4 15" Mac OS X (10.4.5)
Powerbook G4 15" Mac OS X (10.4.5)
Powerbook G4 15" Mac OS X (10.4.5)Hello,
Below are some answers/suggestions to help fix your issues:
1)
Question:
My computer recently started failing to startup. It flashes an image of a globe, and then an image of a finder folder alternated with a questionmark, and then, if I'm lucky, proceeds to normal start up. What is going on? How can I fix this?
Answer:
When you start up your PowerBook and see the image of a globe, that means that your Startup Disk is set to "Network Startup" in System Preferences. To stop this from happening, simply open System Preferences and click Startup Disk, then select "Mac OS X, 10.4.5 on Macintosh HD" and restart. The system folder icon with a flashing ? means that the computer is trying to start up, but cannot (When you change the start up disk, the system folder icon with a flashing ? will no longer be seen).
2)
Question:
My computer has started making noise when it is not doing very much. It makes the noise as if it is busy/overloaded, but it does it even when only one page in safari is open (no other applications are opened).
Answer:
Well, it is hard to figure this one out because I would need to know what kind of noise you were hearing (Humming, whine, click, buzz, etc.). If you have a disk in the drive, that could be causing a noise when it is read. Also, do you hear the noise when you are using battery power or connected to the power adapter?
3)
Question:
My computer has been very slow since my installation of VirusBarrier x4. It usually operates at normal speeds, but sometimes (even when virus barrier is not running) it moves slowly and loads pages in safari at an extremely low pace. Also, when sending files/folders through iChat, the transfer is rapid, but when receiving files/folders, it is excruciatingly slow and often fails. Is there any way that I can clear some memory? I definitely have plenty of memory left as this computer was purchased this past summer.
Answer:
The first thing you can do is trash all of the system caches (Macintosh HD > Library > Caches) and restart. The next thing you can try is to trash all of the caches in your home (Home Folder > Library > Caches), then log out and back in. If both of those do not work, then I would uninstall Virus Barrier x4 and see if that increases speed. If you do uninstall and it makes a difference, then that is what is causing the issue. If it remains the same, state so in your reply.
4)
Question:
My battery is having trouble charging/staying charged. I have heard that re-calibrating may help, but so far it has proved unsuccessful. The battery often jumps from being very charged to less charged to very charged again without being plugged in nor used very much.
Answer:
First of all, have you properly installed Battery Update 1.1? Next, the battery will last longer on a charge if you turn things off such as AirPort and/or Bluetooth. They both use a good portion of the battery when they are in use. Also, try configuring your Energy Saver (System Preferences) differently and see if it helps. Also, the battery will not last forever and I am not sure how much use your PowerBook gets, but but it will eventually need to be replaced.
I am actually not having any of the above issues, but I hope that you get them all fixed. I wish you the best of luck and if you have any questions about anything above, I would be glad to reply back with an answer.
-Jason -
Having some Captivate issues...
I have having a couple issues that were not fixed with the
1.01 update.
1) After I publish a movie, Captivate will sometimes close,
without saving anything at all. The movie is fully published,
however the software basically crashes after it has been published.
(This doesn't happen everytime, but maybe once out of ever 10
movies)
2) When the software is started, the loading screen does not
always display, I sometimes have to minimize all windows, and then
click on the loading screen in order for Captivate to have its own
tab on the taskbar. The loading image will appear when I minimize
all windows, and when I click on the loading image, it will then
create the Macromedia Captivate tab that appears on the taskbar.
3) Captivate cannot handle multiple movies open at the same
time. I noticed that when I publish with more than one Captivate
movie open, the software crashes. By crash, I mean the program
closes the entire movie without saving any changes at all.
I'm running a fully updated XP w/ SP2. I've disabled all
startup processes that are not needed, as well as tried with Norton
turned off- it still didn't work.quote:
For the issue listed as #1, have you tried changing the
output location to a folder very near the root of the C drive? I've
seen issues reported where the path was longer than Captivate
likes, and this can cause issues.
- I tried C:\Demos, and have had it continue to happen. I
normally do not put the finished product in that location, but I do
remember it failing twice when it was at C:\Demos
quote:
I have several programs that behave the same way such as
Firefly, Oracle, and a few others in which I launch the app but it
does not display in the taskbar until the application gets past the
splash screen.
- That's different. I said I have to click on the main logo
in order for the Captivate taskbar icon to appear, I really hope
that wasn't the intention of the developers.
quote:
As for issue listed as #3, I'm assuming you are referring to
having multiple instances of Captivate running simultaneously? I'm
assuming this as Captivate is a single project application. You can
only work on one project at a time. I also know that Captivate does
seem to be resource hungry. I'm not sure I've ever tried (nor had
the need) to open more than two different instances simultaneously.
So how many are you opening? Surely not 100!
- Your assumption is correct. That's a shame that the
developers left out a notice that didn't allow you to open multiple
instances. Hopefully we'll either get a notice when we try it in
the future, or get support for multiple movies open at the same
time, in future Captivate releases.
I've done about 3 before Captivate starts to act funny. It
has enough trouble with 2. I think I got up to 8 before Captivate
crashed.
I'm really looking forward to the new version of Captivate,
is there an area to address feature requests/suggestions/bug fixes
for the next release? -
Poll: Who is having no sound issues with X-Fi Titanium Fatal1ty Pro?
Several weeks ago I purchased an? X-Fi Titanium Fatalty Pro. I have the latest drivers/software installed for all of my hardware and am using Windows 7 64-bit ultimate. There is no sound when the computer resumes from Standby or hibernate. I have to disable the driver in the device manager and then re-enable to restore sound. It seems the X-fi driver is not initializing when the computer resumes from these states. Problem does not occur during a normal cold start or restart.
i have an open ticket with creative support and need to find out if others are having the same issue on windows 7. Several folks having the same issue at this link with little to no success at fixing. I don't know if this is a driver thing, an IRC conflict or what. I have no had this issue on the same hardware with any other sound cards I've I had, to include an HT Omega card and the onboard sound; which leaves me convinced it is something with the X-fi card.
Please respond to this posting if you are having the same issue. If you have found a way to fix it, please say so as the creative support folks are still investigating and have asked me to give them more examples.Just to confirm that deselecting entries in the "headphone detection" tab the creative audio panel seems to provide a temporary (but not an acceptable permanent) solution.
"Automatically mute speakers" provides the workaround but "automatically enable headphone settings" also needs to be deselected otherwise the PC will set to "headphone" on resume (rather than "5:" for example).
So it could be that on resuming from standby it is setting some internal headphone settings to mute the speakers.
I have created a support ticket hoping that this and the other post above might bring about a driver update.
Will keep testing and post any updates. -
I'm also having a music issue. When my phone is attached to the computer (mac running 10.6.8) it looks like my music is there but its gray and I can't play anything. I've tried to delete it and it won't let me but it does not show up on my phone.
By the way, I have tried shutting of the display switching in the power settings. That was basically the only real answer I found anywhere. It didn't work.
-
I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !
I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?
Maybe you are looking for
-
Inbox menu in Self service console is not working(OIM11gR2PS1)
We have upgraded OIM 11g R1 (BP02) to OIM 11g R2 PS1. Issue : when we click on the inbox menu in Self service console, a empty page displayed (attaching screen shot). After closing this page and reopen we are getting error in logs as below. Caused By
-
Send and Receive an xml file over SOAP adapter
hi, I want to send an xml file as an attachment over SOAP adapter and Response also should be file. Can anybody tell the exact solution. Useful responses will be appreciated Thanks Jaideep Jain
-
Extractor for concurrent employment
The standard extractor 0HR_PY_1 does not meet the our requirements, as the extractor sums up the records extracted out of the cluster table into a monthly sum. We requires this to be captured by pay period. what I have to do to enhance the program to
-
hi friends , i want to do code that user will enter the name of the table on selection screen as input and the the program will create dynamically a structure of that table and an internal table. pls help me out .
-
Forms - Database field validation
Hi, I am having an end date column in my form. It will move to the next record when the user presses down arrow key. Here i want to perform date overlap validation. But in query mode the form simply moved to the next record(i am not saving the form).