I need a Invoice of my last payment made last june 20th

I renewed my subscription of adobe on 20 June and need the invoice to the company

Hi bzulategui,
Viisit this link and follow the instructions on this document: Print a payment receipt or invoice | Creative Cloud
Regards,
Ajlan Huda.

Similar Messages

Foreign currency invoice Through APP Run Payment

Hi SAP Guru's,
My company code currency is "SEK" , and i am posting in FB60 currency is USD then i was Run app It is Showing like this Error
Job started
Step 001 started (program SAPF110S, variant &0000000021747, user ID BREDDY)
Log for proposal run for payment on 02/09/2012, identification B1
Information re. vendor 65670 / customer / paying company code 3130 ...
Payment with currency USD, payment method : No valid payment procedure
Information re. vendor 65670 / paying company code 3130 ...
... payment not possible because of reported error
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000008301, user ID BREDDY)
Step 003 started (program RFFOEDI1, variant &0000000000283, user ID BREDDY)
Program RFFOEDI1: No records selected
can any one suggest me if any configuration is needed and how to run "Foreign currency invoice Through APP Run Payment"
Thanks in Advance,
Bhaskar Reddy.S

Hi Vishnu,
Thanks for your quick replay,it is also very useful answer to me. and i got the solution finally.
Setps:-
1) FS00 Under Control Data Tab I Remove the only Balance in Local Currency Check box
2)FBZP >BANK DETERMINATION> RANKING ORDER (Select ur company code), We need to maintain The which currency you want to like you have payment method "C" You should maintain
Payment Method       Currency     Ranking.Order          House Bank
C                                SEK                 1                            1000
C                                USD                 2                            1000
C                                  GBP                3                             1000
Under Bank Accounts Folder
House Bank           Payment Method         Currency      Account ID     Bank Sub account
1000                             I                               SEK             SEK1               200101
1000                             I                               USD             SEK1               200101
1000                             I                               GBP             SEK1               200101
Under Available Amounts Folder
House Bank          Account ID      Days    Currency    Available for outgoing Payment
1000                       SEK1                0           SEK           9,999,999,999,99
1000                       SEK1                0           USD           9,999,999,999,99
1000                       SEK1                0           GBP           9,999,999,999,99
Thanks,
Bhaskar Reddy.S

Query to find all standard invoices applied against pre-payment invoices

Dear All,
Please help me with the query which would list all the standard invoices applied against pre-payment invoices.
Additionally they query show display the pre-payment invoices which are not yet applied.
Example :
Rec # Pre-payment inv # Inv-amount Standard Inv No. Amount Applied
1 P001 100.00 S001 100.00
2. P002 200.00 NULL NULL
In the above example in record no. 1 for the pre payment invoice number P001 a standard invoice S001 is applied with same amount of 100.
In the second record the pre payment invoice P002 is not yet applied and hence standard invoice number and amount applied are NULL.
I need the output of the query in the above format.
Please help me in this regard.

Hi:
Clearing document (AUGBL) generated against invoice with document type AB will be an option to use for reporting purpose. No matter invoice is partially cleared or fully exhausted system generates a clearing document against it. It stores the payment usage. System should check in BSID table with reference to AUGBL if there is anything left against invoice that is to be paid or if it is fully exhausted it will be present it BSAD along with it payment usage data. I hope this will help you in developing your report.
Regards

A/R Invoice - Create two outgoing payments

Hi,
We have issue here regading A/R Invoice Payment.
The A/R Invoice is $100, the payment is $200 with Interact card (Direct account payment) with $100 cash return.
The present does not work in B1; but will be developed in future release.
The present can be solved according to Peter Dominik, B1 Solution Management as follow:
Create two outgoing payments:
- payment to vendor (payment for his bill)
- payment on account reposting balance from Bank Account to some
PettyCash account (cash
withdrawal from bank account)
Now I need to source code for the present solution; because all SDK is 1 A/R Invoice and 1 Payment. Now we have to do 2 outgoing payments. We need your help for this solution.
Please find the code for one transaction below; we need 2 payment transactions.
Thank you,
Rune
oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
oPayments.Invoices.DiscountPercent = 0;
oPayments.Invoices.DocEntry = vmp_DocEntry_Int32;
oPayments.Invoices.DocLine = 0;
oPayments.Invoices.InvoiceType = SAPbobsCOM.BoRcptInvTypes.it_Invoice;//13;
oPayments.Invoices.SumApplied = vmp_Amount_double;
oPayments.Invoices.Add();
oPayments.CardCode = vmp_CardCode_string;
oPayments.DocDate = DateTime.Now;
oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
oPayments.TaxDate = DateTime.Now;
oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343";
oPayments.TransferDate = DateTime.Now;
oPayments.TransferReference = vmp_CardCode_string;
oPayments.TransferSum = vmp_Amount_double;
vc_Message_Result_Int32 = oPayments.Add();
if (vc_Message_Result_Int32 != 0)

hi Vitor,
I need a code sample for Peter's suggestion using the code I provided:
Create two outgoing payments:
- payment to vendor (payment for his bill)
- payment on account reposting balance from Bank Account to some
PettyCash account (cash
withdrawal from bank account)
Thank you,
Rune

Reversing a Invoice document posted last year

Hi Gurus,
Our client has posted a Invoice document last year end and then closed the year.
The Funds management is active so the Corresponding WBS and Cost center is updated.
Now the user got the payments in 3 different docs where the user do not wan to do partial payments as the WBS and Cost center will not be picked up.
How can we break the vendor posting into 3 postings and reverse the posted doc.
Regards
Lakshmi

Hi Lakshmi,
It's not allowed to reverse invoice posting for last year.
You can create a Return PO with ME21N or do a FI posting.
Best Regards,
Owen

Invoice reference for residual payment

HI experts
I observed if I receive the payment from customer Rs 10000 for the invoice Rs15000 through residual payment then system creates new line item for Rs 5000 and this will be shown as open item and all others will be clered items.
Here my issue is for new line item system is not storing the original invoice details in invoice reference field. How to maintain source invoice details to residual new line item.
Pls advice me
Thanks in advance
Sneha

Hi,
Anil is correct. All the details you entered in your incoming payment document when you posting your residual payment, will be displayed in the new line item created after that. My practice last time is that I will maintain the original invoice number at Reference field as suggested by Anil and entered my PO or SO number at Document header text.
If you don't wish to lose all the original details, you can use partial payment tab instead of residual. Partial payment will post the incoming payment without clearing any item. Then you can clear it off all together when you are posting for the last incoming payment for that particular invoice.
Hope this help.

Imported po has been done and down payment made last F.Y and now want cance

Please help me for below scenario.
Our client was created Imported PO and down payment made in last F.Y and now some reasons they want to cancel the PO and create new domestic PO with same PR.
But down payment was cleared and accounts are audited they don't want to reversal the down payment.
How it is possible to cancel the PO without reversal of down payment.
and i reversed the DPR remain down payment is same and tried to cancel the PO line item but it is showing below error.
Diagnosis
You have attempted to delete or block an item that is not yet closed.
An item is regarded as closed if:
o no GR blocked stocks exist
o all down (advance) payments made to date have been taken into
account
o the quantity delivered is the same as the quantity invoiced
o all delivery costs have been taken into account
o the quantity delivered is the same as the quantity issued (only in
the case of stock transport orders).
Please provide me the posible solutions urgently.
Best Regards
Ranganadh

Dear Ranganadh,
For closing/ cancelling the PO, main prerequisite is "There should be no open transactions against that line item."
So unless you reverse/ cancel the downpayment, you can not delete the line in PO
Umakanth R

Cstomer customer invoice settlement against Incoming payment

Dear All
We have a problem during customer invoice settlement against incoming payment that shown for the partial payment as a new document creation. The scenario as shown below,
     Doc No      Amount
180000001   50000.00 ;   - Invoice
140000001   25000.00-   - Incoming Payment / partial payment
balance         25000.00 ; - create a new doc no ( but we need setoff to invoice no)
i.e:
180000001       25000.00
any BAPI to apply over come this problem ?
Thanks
Madhawa

Dear:
              Please refer to the following link, the same question was raised by me
              Invoice reference field in F-28
              Regards

Debit/Credit memo adjustment with Original invoice before making single payment

Debit/Credit memo adjustment with Original invoice before making single payment.(will zero payment batch will work?)

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Pendekanti Mahesh ([email protected]):
Debit/Credit memo adjustment with Original invoice before making single payment.(will zero payment batch will work?)<HR></BLOCKQUOTE>Zero amount payment at payment can be made to nullify the new invoice with credit/debit, and clear the invoices. This is resorted to when you want to clear the credit/debit memos you have entered and no longer need.
null

Printing Invoice Appendix On Last Page Of Each Invoice

Hello,
I have to print "Invoice Appendix" at the last page Of each Invoice Print Report.
Invoice Appendix is coming properly if u run for a single Invoice as i have used section Break as bellow-
Start Of Invoice Header
Start Of Invoice Lines
End Of Invoice Lines
End Of Invoice Header
--------------<Section Break>------------
Start Of Invoice Appendix
End Of Invoice Appendix
But when i run the report for multiple Invoice "Invoice Appendix" print only on last page of the last Invoice.
Can you please Help me, I need Invoice Appendix should display for every Invoice at the last Page. i'm using xmlp 5.6.1
Regards,
Aanta.

Hi Aanta
You need to be on 5.6.2 release, you can then use the last page only feature to do this. Check the user guide for details.
Regards, tim

Closing an invoice with an open payment

Hello,
Can anyone help in getting me started on how to close an invoice with an open payment?. I have a requirement to find the open payments for an invoice and close the invoice programmatically.
Thanks.
-Richard.

Dear Richard,
Generally, we will close the invoices when we do payment on the invoices by function 'Incoming Payments' and 'Outgoing Payments' under 'Banking' in B1.
Could you explain what mean 'open payment'?
How to create the 'open payment'?
Best Regards
Jane Jing
SAP Business One Forums Team

I ordered a iPod touch , and it says I need an invoice. Shipment requires commercial invoice from customer or seller ?

I ordered a iPod touch , and it says I need an invoice. Shipment requires commercial invoice from customer or seller ?

Ordered from whom?
In " and it says I need an invoice" what is "it"
Are you specifying special shipping?

Creation of Vendor Invoice - BADI to control "Payment Baseline Date field"

Hi ,
In SRM - Creation of Vendor Invoice or Credit memo -
In the process of creation of vendor invoice in Header Data - Payment Data tab there is a field "Payment Baseline Date" and I want to populate custom value to this field using BADI. But I could not find any BADI to do this.
Can any one please let me know if any idea what BADI I can use.
I tried DOC_CHANGE_BADI and this one does not have this field in the ET_HEADER.
Thanks in advance.
Venkat

Hi,
Any ideas please?
Thanks for ur time.

Payment made twice for an invoice

Payment made twice for an invoice.We have posted an invoice on 23.11.2008 in a company code for a vendor,then F110 was run on 24.11.2008 and was paid.Then again on 25.11.2008 payment was done for the same invoice.The clearing doc of payment run on 25.11.2008 is reflecting against the invoice.Hence reversed the payment done on 24.11.2008.
Pls let me know how can p[ayment happen twice for an invoice thru F110.

hi,
It'll never possible to make a payment for the secondtime, unless you reset the earlier payment run in SAP.
I hope U have reset the payment done on 24.11.2008. thats the reason why, clearing doc related to 25.11.20087 is displayed against in the invoise. please check.

AP Invoice - Credit memo - negative payment amount

Hello all,
I am working in 11i oracle apps.
In AP_invoices_all table there is an invoice_id that has a negative amount on it
I understood that it is a credit memo. Can you please explain what a credit memo is and how does it affect a business
Also, when I checked the corresponding invoice_id in the AP_invoice_payments_all table, this invoice has a negative payment amount. What does this mean? How is it going to effect in the journal entries.
Thank you
Bob

Hi.
A Credit Memo can be considered the opposite of a Standard Invoice. It can be due to severeal reasons like, for example, when you claim to your supllier that the price for a certain good or service was higher than the agreed he can send you a Credit Memo in the amount of the price difference. You have recorded the Invoice (let's say $100) for the wrong price and now you will record the CM (let's say $10) for a negative amount being that the sum of the two documents correspond to the correct purchase you have done.
This way, the table AP_INVOICE_PAYMENTS_ALL records the CM with a negative amount allowing you to pay the two documents (the positive invoice and the negative CM) for the net amount.
About the journals entries:
Invoice
DR Cost $100
CR Liabilty $100
CM
DR Liability $10
CR Cost $10
Payment
DR Liability $90
CR Bank $90
Hope this helps,
Octavio

I need a Invoice of my last payment made last june 20th

Similar Messages

Maybe you are looking for