I need to download an online quicktime video for a project. Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

Let's first try updating using an installer file downloaded from the Apple Website:
http://www.apple.com/itunes/download/

Similar Messages

I often get the message "The Adobe Flash Plugin has crashed / Reload the page to try again" but the plugin check page does not list Adobe Flash.

The plugin check page does list something called 'Shockwave Flash." I went to the Adobe site and downloaded and installed the latest version of Adobe Flash but it still does not show up on the plugin check page. I don't see how Adobe Flash can be crashing in Firefox when Firefox doesn't even know that it's installed.

Your System Details List shows the Shockwave Flash 12.0 r0 plugin as installed, so you appear to have the Flash plugin installed.
You can check the version of the current Flash player here:
*http://www.adobe.com/software/flash/about/
*http://helpx.adobe.com/flash-player.html
What is the current setting for the Flash plugin on Firefox/Tools > Add-ons > Plugins?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."

Hi,
One of my user was unable to receive email from her desktop outlook, browser and her phone. On her outlook, the status of her exchange is disconnected. Then when she tried to access her OWA, this error prompted below "
"Something went wrong. We're having trouble getting to your mailbox right now. Please refresh the page or try again later. If the problem continues, please contact your helpdesk."
Her emails started coming in again after about 45minutes later. It happened twice today.
Anyone have the same symptoms as mind?

Hi,
When user is disconnected to Exchange, please test outlook anywhere connectivity for this user.
Test Outlook Anywhere connectivity
https://technet.microsoft.com/en-us/library/ee633453(v=exchg.150).aspx
Please also check if there are any other events in application log.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Unable to open Power BI Sites - Error: We were unable to load the Site. Refresh the page to try again

Power BI Sites Error
We were unable to load the Site. Refresh the page to try again
When opening Power BI Sites with internet explorer, in certain security configurations you may run into the above error. While we are looking into resolving this, please see the following workaround:
From the Tools menu, select internet options.
On the security tab uncheck the "Enable Protected Mode" checkbox form the relevant Zone (Intranet/Internet)
Remove all entries to *.powerbi.com from trusted sites or/and local intranet sites
On the advanced tab, uncheck the "Enable enhanced protected mode" (if you made a change here it will require a restart of the machine)
Restart and try again (if not changes done in the last step, just restart the browser)

Hi
Any further debugging tips? I upgraded from IE9 to IE11 on my Win7 machine to try get Q&A working, it broke the entire PowerBI site for me

A page item on page 'SCHEDULE' at location 34,488 requires rasterization, but is too large to rasterize. Resize it smaller and try again

I keep getting this error,
A page item on page 'SCHEDULE' at location 34,488 requires rasterization, but is too large to rasterize. Resize it smaller and try again

This basically means that there is an object that has its top left corner at x: 34 y: 488 which is too large to be rasterized, it could be due to any large object that is extreme wide or tall.
Try to check page content and then resize it to verify the behavior. Please let me know how it goes.
Thanks,
Sanjit

Correct way to stop and run again a FPGA reference

Hi guys !
I have some issues when I try to stop and run again an FPGA vi, I explain.
I have two DMA FIFO, one to send data to the FPGA from the CPU, and another from the CPU to the FPGA. When it receives data, the FPGA processes them and sends them back to the CPU and according to the result the CPU makes something. For instance it can be switch on LEDs or rotate a DC motor.
But to do this kind of actions, I have to use an "FPGA Personality", LEDs and I/O Pins seem to be managed by the FPGA core. So I've to close my FPGA vi reference in charge of receive data from the CPU, make my LEDs switching on and then after rerun again my FPGA VI again, If I don't do that LEDs blinking or motor rotation stay without effect... But close and start again the FPGA VI creates problems during the execution, especially for previous waiting of reading on the DMA FIFO... I've tried to catch errors on the FIFO to start again the FPGA VI with a right timing but nothing... I'm lost and I think that I'm missing something, a concept or something else.
I can't share my code because I'm working for a company but I would like to know if you have VI with this type of structure : an FPGA reference which have to be halted to allow hardware interaction with the default FPGA personality and then run again, everything with a good synchronisation...
I hope I'm clear, but if it's not the case, I can reword if necessary.
Thank you for the help !
Afghow.
Solved!
Go to Solution.

Afghow wrote:
I think the end user doesn't have to know that when he wants to make LEDs blinking he has to call a FPGA bitfile. I mean running an FPGA VI and want to make LEDs blink from the CPU VI at the same time should be transparent for the user and this without keep in mind horrors like bitfile switching for instance.
He doesn't have to load a different FPGA bitfile. Everything you need that FPGA to do should be in the bitfile. Keep in mind that we are talking about HARDWARE when we talk about FPGA. Each time you change bitfiles, the hardware has to be reconfigured. That takes time and is pointless for the situation you are talking about. Build your FPGA code to do everything you need it to and you will be fine.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I try sending an email and Firefox disrupts the connection and I have to reload the page. Also, cannot attach any documents to emails.

I try sending an email and Firefox disrupts the connection and I always have to re-load the page. Also, I cannot attach any documents to emails.

Try one or more of the following:
> Restart Your Computer
> Uninstall and Reinstall iTunes
> Reset iPod (nothing will get deleted)
> Look in My Computer (Windows 98, XP) OR Computer (Windows Vista or 7) and see if your iPod is in there.
In some cases (and this happened to me before) plug your iPod in and out your computer a few times. It should get it going. If not, then I strongly recommend starting your computer.

Why do i have to reload the page several times before all the content appears?

I need to hit the reload button at least once sometimes twice before a web page appears correctly or to get all of the pages content. This problem just started. I also can no longer get the Veetle movie player to work it wont download the channel anymore. I think this is the same problem and this also just started to happen.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
*http://kb.mozillazine.org/Error_loading_websites

An error occurred while configuring server as a directory server. Please check your network configuration and try again.

Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
    Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
        "Creating Open Directory master"
    ), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
Kim

Had the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0

Firefox was a good, but now it's slow and when I search google I have to refresh the page when I click the back button. This is driving me to other browsers.

When searching in goole, If I click on a link and want to go back a page firefox does not load the previous google search without refreshing the page. Because I use google frequently this is very annoying. Firefox has also been freezing and crashing most frequently of any of the other browsers that I have been driven to use. I'm not sure why I should keep it on my computer at this point.

Regarding the Google results page blanking out when you go back, this occurs when using a combination of three settings, which may be fairly common:
* Zoom level higher than two steps (120%; the newest versions of Windows apparently default to 125%, which Firefox detects and adopts)
* Google search set to instant prediction results (default on Google search, but can be disabled in Search settings, see [https://support.google.com/websearch/answer/186610 Google Instant Search Help])
* Opening results in the same tab, then using the Back button to return to the results page (default on Google search, but can be changed in Search settings to open results in a new window/tab, see [https://support.google.com/websearch/answer/425 Google Search Help])
Firefox's cache feature attempts to maximize speed for forward and back actions by storing the last rendering of the page. Something about the instant prediction results ''with zoom'' is causing Firefox to briefly display the results and then they blank out and you have to reload the page to get them back. The mystery is why this only occurs (so far as I have heard) on Google? Is one of Google's scripts blanking out the page? Does Google care that it's messing up Firefox users?
For now, if you do not want to or cannot change any one of the three factors needed to experience this problem, you can disable the storage of the last rendering of the page. Then Firefox will skip the shortcut and lay it out fresh, which is known to work. As noted in earlier posts, you make this change using the about:config preferences editor.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''sess''' and pause while the list is filtered.
(3) Double-click the '''browser.sessionhistory.max_total_viewers''' preference and change it to 0 (that's a zero).
This thread has a lengthy discussion: [https://support.mozilla.org/en-US/questions/970863 When I go back to Google search results page, it takes me to a blank Google screen].

On start up my mac book pro shows a white screen with a folder with a ? in it then switches to the apple symbol with the loading bar under it but it freezes about half way any ideas

My mac book pro on start up shows a white screen with a folder with a question mark in it then switches to the apple symbol with the loading bar under it but it freezes about half way. Only started to have problems since upgrading to yosemite any ideas.

I do hope you have recent backup, because it look like your hard disk is failing. You can start up in Recovery Mode, and run Disk Utility to see if the disk can be fixed: OS X: About OS X Recovery - Apple Support

Something went wrong. To try again, reload the page and then start the workflow

We have a SP 2013 farm with Aug 2013 CU. While trying to start an SPD 2013 platform workflow from browser I get an error "Something went wrong. To try again, reload the page and then start the workflow."
I could also see the following in ULS:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean
isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials
(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|
microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll
This seems to be a bug and is solved in Mar 2013 PU but I have Aug CU. The web where I have this workflow has classic mode auth. Has anyone come across this error before?
I have checked the following:
1. Service
Bus Gateway and Service
Bus Manager Broker services are started
2. Authentication for this web application is Windows NTLM
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Thank you for the steps.
I have checked User Profile service and it is started and running fine. The user who is trying to start the workflow (me) has a profile created. I'm not starting wf as system account and my account is not added to web application user policy. Workflow isn't
even firing when I try to edit list item.
I tried to edit the list item as system account and workflow started this time. But it does to suspended state with the following message:
RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: RequestorId: 54f4a912-ab0b-a1f2-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"SPRequestGuid":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"request-id":["54f4a912-ab0b-a1f2-be58-305dd8b6eab4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["2"],"SPIisLatency":["1"],"MicrosoftSharePointTeamServices":["15.0.0.4535"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 24 Apr 2014 15:32:05 GMT"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["NTLM"],"X-Powered-By":["ASP.NET"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
WhenI try to start wf I can see the first error:
System.NotSupportedException: Not supported in Windows authentication mode.
at Microsoft.SharePoint.IdentityModel.SPIdentityContext.Create(SPUserToken token, Boolean isShareByLinkGuestUser)
at Microsoft.SharePoint.WorkflowServices.WorkflowServiceContextExtensions.GetApplicationUserCredentials(WorkflowServicesContext context) StackTrace:
at Microsoft.Office.Server.Native.dll: (sig=35339f9c-8871-4ef1-9118-9c1bd0cb6598|2|microsoft.office.server.native.pdb, offset=131CE)
at Microsoft.Office.Server.Native.dll: (offset=21B4D
-- The opinions expressed here represent my own and not those of anybody else -- http://manojvnair.blogspot.com

Something went wrong. To try again, reload the page and then start the workflow, error on starting a workflow

i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is empty

Hi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Netflix keeps giving me the error: Whoops, something went wrong... Unexpected Error There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.

Netflix keeps giving me the error: Whoops, something went wrong... Unexpected Error There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.

This is what Netflix has to say:
https://help.netflix.com/en/node/2417
Ciao.

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

I need to download an online quicktime video for a project. Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

Similar Messages

Maybe you are looking for