I need  to mark the CATSCO records as transfered

Hello
I need to mark records for a previous month as 'Data Transferred to the Target Component' CATSCO-TRANSFER in a new SAP instance. That is all records in CATSCO needs to have the field CATSCO-TRANSFER flagged as "X" (YES)
This is the scenario: If we are going live on October 1, I need to have September time sheet data in the new SAP system but should be marked as 'transferred'. The data is required for any corrections, like assigning time to a wrong WBS element. The adjusted time will be posted to the current month.
Is there any 'note' or any other way I can achieve this?
Thanks
PS

Hi,
I am not sure whether i understood it correctly. But,how are you bringing in the September entries in to your new SAP system? If you are entering those through CATS, you can do CAT7 to get them transfered to CO.
Regards
Sreekanth

Similar Messages

  • Do we need to create the mx records if the send/receive the mail in the same organization?

    1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
    2,If we send /receive the mail between two different organization/forest, we need to create the mx records  ,is it right?
    Please click the Mark as Answer button if a post solves your problem!

    1,May I know do we need to create the mx records if we send/receive the mail in the same organization?
    2,If we send /receive the mail between two different organization/forest, we need to create the mx records  ,is it right?
    Please click the Mark as Answer button if a post solves your problem!
    for 1. If you mean the same Exchange org, no.
    For 2, it depends. You need a MX record for your receiving SMTP server ( At least, You *should* have one), but if sending to another org, not necessarily, as you could smarthost messages to it and a MX would not be required.
    Just curious, what problem are you trying to solve?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How do i mark the first record in a alv?

    Hi all,
    whenever i display a ALV on the screen using "set_table_for_first_display" by default i need to mark the first row of that table i.e. the first row gets selected in it how do i achieve this?
    Regards,
    Srikanth

    call the method set_selected_rows after calling set_table_for_first_display  and do it.
    You have to pass index 1 to the parameter IT_ROW_NO.

  • Need to select the max record in a report

    Dear All,
    I have a certain report which displays the employee records along with their 'empids' and their 'beginning date'. For each 'empid', there are more than one records and hence more than one 'beginning date'. I need to select that record which contains the maximum 'beginning date'. How can this be possible in the reporting level without doing any coding in update rules or writing any exit ?
    Regards,
    Srinivas

    Hi,
    I think it is not possible because  i am having doubt how the for each employ id how it will be different joining dates,i think for each employ having differeent joining dates ,if u want to see maximum number of employs in which in company then we can go for the only option non cumulative kf with maximum value with ur joining date as the reference.but it report level if it is keyfigure we can have options of maximum and minimum and like that we can do but in case of characterstic like employnumber and joiningdate both are characterstics.
    Thanks
    sathsih

  • Need to fetch the last record/row from a table

    Hi,
    I have a requirement like fetching the closing balance of the last record of the table and inserting the same into the opening balance of the immediatetly created next record.
    In simple words, I need to fetch a value from the last row of the record.
    For example, I use the below query,
    select rownum, empno, ename from emp
    where rownum = (select count(rownum) from emp);
    But, the above query does not return any of the record.
    Hence, need help on this.
    Regards,
    Shivakumar A
    Edited by: shiva on Mar 27, 2011 10:14 PM

    Rows in a table are inherently unordered. In order to introduce the concept of "first" and "last", you would need to specify how to order the rows which would require that there was one or more columns in the table that you could order by in order to determine the "last" record.
    In your closing balance example, if we assume that there is something like a BALANCE_DATE column,
    SELECT account_number, balance_amount, balance_date
      FROM (
        SELECT account_number,
               balance_amount,
               balance_date,
               rank() over (partition by account_number order by balance_date desc) rnk
          FROM table_of_balances )
    WHERE rnk = 1Justin

  • Trying to use labview to analyse analog data from a jump on a force plate and measure peak force (at two points, initial land and 2nd land from jump). Also need to mark the time of flight (time off plate).

    Attached is a file of 3 trials of a drop vertical jump activity onto a force plate.  the subject stands on a platform off the force plate, jumps onto the force place and immediately jumps up as if going for a rebound.  I am able to run this data and obtain a waveform graph with no problems.  however, I need to be able to find the initial contact with the force palte, the peak of the drop, the intial time off the force plate (prior to the jump), the return from the jump and finally the second peak (landing from the jump). 
    I want to calculate the time of flight ( time off the plate and in the air after the intial drop) to calculate juimp height.
    I had someone write me a mathscript for it and it works well, however, I need to do it without mathscript as I do not understand mathscript (nor Labview!!).
    Please help
    Attachments:
    Jose_Index and shift register6.vi ‏130 KB
    NI post.docx ‏365 KB

    OK, but I'm not understanding what you're asking us to do... Are you asking us to explain what the MathScript code is doing? (It's searching the array for the elements when the values are above or below a threshold.) Are you asking someone to convert the whole MathScript code to LabVIEW (we are not a code-writing service), or you just want to be able to calculate the new stuff you want with LabVIEW?
    In the future, please do not post proprietary file formats. Most people do not have Word, or Word 2007 for that matter. Please post text files or PDFs. Thanks.

  • Query needs display only the recent record that was updated into BW.

    Hi Gurus,
    I have a question related to query creation.
    I hve one Infoset which was built on top of Opportunities data and Activities data cubes.  Tthey are linked using Opportunity GUID.  And in the query I am displaying the Opportunity ID(from Opportunity cube),  Sales order Number from the Activities data and a keyfigure No of Doc headers from the opportunities cube.  Everything is fine.  I want to display One Opportunity ID and One Activity associated with it.  I mean I want to display only the activity ID which is very recent.  But the query displays all the activity IDs which are associated with the opportunity ID.   We are not using any time characteristics too as the query has to display all the data that is there in the cubeI just want to see the recent activity that has got updated into the cube.  Kindly advice on how to achieve this..
    THanks in Advance
    Mohan Kumar

    Hi mohan,
    try to do some restriction by using  request ID (0requid) and variable 0S_RQMRC (Most current data on 0requid).
    for example a restriction on activiy id by most current request ID.
    hope it helps.

  • Split and mark the records

    Hi all,
    I have the below scenario where i need to mark every 4 records with a number. The count of ids can vary for example i am taking 10 id's. Can any one suggest a sql statement to achieve this. Thanks for looking into it.
    id         mark_id
    1            1
    2            1
    3            1
    4            1
    5            2
    6            2
    7            2
    8            2
    9            3
    10           3

    Hi,
    Here's one way:
    SELECT       id
    ,       CEIL ( ROW_NUMBER () OVER (ORDER BY id)
                / 4
                )     AS mark_id
    FROM       table_x
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using.

  • How to delete the duplicate records in a table without promary key

    I have a table that contains around 1 million records and there is no promary key or auto number coulums. I need to delete the duplicate records from this table. what is the simple effective way to do this.

    Please see this link:
    Remove duplicate records ...
    sqldevelop.wordpress.com

  • How to get the Data Record Number in BI 7.0?

    Hi All,
    In our requirement we need to load the Data Record Number in the DSO. I got the Request ID and Data Packet Number but not the Data Record Number.
    Does anyone has any idea?

    Hi......
    When the data is activated in DSO, it is written to the table of active data, where it is then available for reporting. Requests are sorted by the key of the DataStore object, request ID, data package ID, or data record number.
    You just load the data to the DSO.....and activate it.......it will autometically get generated.......You cannot load it from one DSO to other beacuse in this case Change log table is used........and this filed is in active table..........I think you need this fir reporting purpose.....so load it and activate the DSO......then it will be available in your active table for reporting.........because reporting is done on active table.......
    Check this link :
    http://help.sap.com/saphelp_nw04s/helpdata/en/a9/49453cabf4ef6fe10000000a114084/frameset.htm
    Hope this helps you....
    Regards,
    Debjani....
    Edited by: Debjani  Mukherjee on Sep 16, 2008 5:22 PM
    Edited by: Debjani  Mukherjee on Sep 16, 2008 5:25 PM

  • To find the duplicate record in internal table

    Hi,
    i have a requirement to fine the duplicate record with 3 fields.
    i am getting a flat file with 15 fields  .
    i need to check the duplaicate records of  3 fields . if i get any 2nd same record of 3 fields , the records will go to other internal table.
    for ex :
    1. aaa  bbb ccc ddd  eee  fff  ggg   hhh
    2. aaa  bbb ccf  dde edd  ffg ggh   hhj
    3. aaa  bbb cce ddd  ees ffh  ggu  hhk
    in that 1st record and 3rd record are same (aaa bbb ddd)
    i need to find 3rd record
    please help me
    regrards
    srinivasu

    hi,
    itab2[] = itab1[].
    sort itab1 by f1 f2 f3.
    sort itab2 by f1 f2 f3.
    delete itab2 index 1.   "to delete the first record in itab2.
    loop at itab1 into ws_itab1.
      loop at itab2 into ws_itab2.
       if ws_itab1-f1 = ws_itab2-f1 and
         ws_itab1-f2 = ws_itab2-f2 and
        ws_itab1-f3 = ws_itab2-f3.
         ws_itab3 = ws_itab2.
         append ws_itab3 into itab3.   "Third internal table.
       endif.
    endloop.
    delete itab2 index 1.   
    endloop.
    ITAB3 will have all the duplicate records.
    Regards,
    Subramanian

  • To Get the earlier records in a table for a particular id neglecting the newer ones

    Hi All,
    I need to get the older records for a particular id rejecting the newer ones..My Scenarios is as follows..
    ID      Result           Date
    1        Pass             2015-01-01
    1        Fail                2015-03-05
    2       Pass                2014-06-07
    2       Fail                  2015-02-02
    My Output will be 
    ID        Result              Date
    1          Pass                2015-01-01
    2          Pass                 2014-06-07
    How can i achieve this....Thanks in advance

    Please follow the basic Netiquette of all SQL forums for the past 35+ years on the Internet. Post DDL that follows ISO-11179 rules for data element names. You have no idea; you do not even know that DATE is a reserved word in SQL! Use industry standard
    encodings (ISBN, UPC, GTIN, etc) and avoid needless dialect. Give clear specifications. Give sample data. Web need to see the keys and constraints, the DRI, etc.  80-95% of the work in SQL is in the DDL. 
    If you do not know that rows are not records, fields are not columns and tables are not files, then you should not be posting. If your tables have no keys, you should not be posting. If you have not tried any DML yourself, you should not be posting. 
    >> I need to get the older records [sic] for a particular product_id, rejecting the newer ones..My Scenarios is as follows.. <<
    Now we have to do all your typing because of your bad manners. Thanks a lot. Here is a repair job. 
    CREATE TABLE Inspections 
    (product_id CHAR(5) NOT NULL,
     inspection_date DATE NOT NULL
    PRIMARY KEY (product_id, inspection_date),
     inspection_result CHAR(4) NOT NULL
     CHECK (inspection_result IN ('pass', 'fail'))
    INSERT INTO Inspections 
    VALUES
    ('prod1', '2015-01-01', 'pass'),
    ('prod1', '2015-03-05', 'fail'),
    ('prod2', '2014-06-07', 'pass')
    ('prod2', '2015-02-02', 'fail'); 
    Here is one way to do this: 
    WITH X(product_id, inspection_date, inspection_result, first_inspection_date)
    AS 
    (SELECT product_id, inspection_date, inspection_result,
            MIN(inspection_date) OVER (PARTITION BY product_id) 
       FROM Inspections)
    SELECT product_id, inspection_date, inspection_result
     FROM X 
    WHERE first_inspection_date = inspection_date;
    --CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
    in Sets / Trees and Hierarchies in SQL

  • Updating only the last record.

    Hi,
    I have a scenario where we get more than 1 record based on style. Everytime the new record comes in, I need to update the last record inserted. It requires a procedure to do it, but need some help on how to just update the last record only and not all the previous received records.
    Here is the scenario.
    create table test_1 as
    with data_Set as
    ( select 'ABCD' style, 20080101 date_received, 2 duration,20080301 expire_Date from dual union all
    select 'PQRS' style, 20080201 date_received, 2, 20080401 expire_Date from dual
    ) select * from data_set
    so now on next run when i get another record
    insert into test_1
    select 'ABCD' style, 20080401 date_received, 3 duration,20080701 expire_Date from dual.
    now the procedure should insert the incoming record and also update the expire_date for the previous record to a day before date_received for the new record. I am ok doing it when its only 2 records , but when i get another record of same style, i dont want to update all the previous received records. I only want to update the last record on file.
    can anyone suggest?

    STYLE     DATE_RECEIVED     DURATION     EXPIRE_DATE     SEQ_INSERTED
    110427     7/31/2006     0     7/31/2006     2
    110427     9/1/2007     12     9/1/2008     2
    110427     8/2/2008     24     8/2/2010     3
    468130     3/13/1997     0          2
    468130     3/13/1997     12     3/13/1998     2
    468130     1/12/2008     12     1/12/2009     3
    Here is my data set
    and here is the query i use to update, does it look correct?
    update test b
    set ( expire_Date) =
    (select start_date - 1
    from test a
    where (style_no, date_received) in
    (select style_no, max(date_received)
    from test c
    group by style_no
    and a.style_no = b.style_no
    and style_no in ('468130','110427')

  • Copying the error records in a custom table

    Hi,
    I  have a report program which is fetching Invoice header and line items . I need to copy the error records (records having a custom field ZZKUNNR as blank) in a custom table . I am executing this report in background daily .
    The records in the custom table can be corrected by functional guys
    Daily the report should fetch the data from SAP and also it should check whether there are correct records in the custom table .
    If the records are found from custom table then those records also must be fetched.
    Finally the output is stored in an application server .
    Kindly help how to write the code for error records.

    Hang on a moment here... I am sure we deleted your user ID a few months ago for ponits gaming!
    Did it "pay off" somehow and now you have a "real job" but don't have a clue what you are doing?
    Doesn't that make you feel just a little bit unconfident about life, the universe and ABAP?
    Cheers,
    Julius

  • Best way to create detail records based on data in the master record..

    Hi,
    I am using 11gr1p1 and ADF stack.
    I have a master detail relation between 2 records. I have EO and entity associations. I want to create a number detail records based on the data on the master record.
    For example
    I have a Stay Record which has begin and end date I need to create the DailyStay Record for each day for the range of begin and end date of StayRecord.
    Where should I do this? In EO implementation or in VO implementation.?
    Thanks

    Where should I do this? In EO implementation or in VO implementation.?If your child record should in no case be created without those default values, then EO.
    Otherwise, to increase reusability of your EO, then in the VO over the view link (i.e. other VO's would still be able to use your EO without having the child VO created with these defaults).
    This way your ViewObjects can also be used in a context where you don't want to copy from the masterFrank, If there's another UI flow that is so drastically different that it does not want things defaulted, then it probably needs a different VO altogether (on the same underlying EO though)

Maybe you are looking for