I upgraded my iPhone 4 software to iOS and i now get a message reading "SIM card not supported"
I upgraded my iPhone 4 software to the latest iOS version and now cannot get network coverage. I only receive a message that reads "The SIM Card inserted in this iPhone does not appear to be supported".
anyone with ideas for a possible solution?
You have a phone that is locked to a specific carrier. If it worked with your carrier before the update that means that the phone was hacked or jailbroken. Updating it "undid" the jailbreak and left the phone locked to its original carrier. There is no way to resolve this, as there is no jailbreak for iOS 7 and no way to go back to the previous version of iOS.
Similar Messages
-
I can't upgrade my iPhone 4S to IOS 5.0.1. It says that it's not compatible. I was upgrading my previous iPhone and iPad2 without any problems. What's wrong?
Try putting it in Recovery Mode.
See http://support.apple.com/kb/HT1808 -
Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
LouisaHi, l have the same problem, were you able to resolve?
-
I just upgraded my iPhone 4s to iOS 6 but now it isn't compatible with my itunes 10.6. I have tried to download itunes 10.7 however my macbook is only 10.5.8 so I can't. So now I can't connect my iPhone to my itunes, what should I do?
Hi guyz just fixed mine just now, I used an app named iREB please refer to the below link. Make sure youre iphone is plugged in to your USB then launch the app as admin. As soon as the app is running go to the "Recovery Mode Loop Fixer" tab & hit the "Set Auto-Boot True (Fixes 1015 errors / Recovery Loops). It will restart your iPhone in just a moment & get you back to your homescreen.
I hope this will help those whos undergoing this horrifying iPhone problem.
Just additional info.
Issue: Stucked with USB & Itunes Logo during upgrade attempt to iOS 6.0
Iphone 4S (iOS 5.1.1.(9B206)
32 GB
Official Factory Unlock
PC-Win 7 Home Premium 64bit
iREB Download Link:
http://www.yourtechinfo.com/2012/05/how-to-fix-recovery-mode-loop-or-itunes.html #Downloads: -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
When downloading Iphone software update (version 4.0), I get error message
When downloading Iphone software update (version 4.0), I get error message (stopped err = -3259). Is there a solution for this???
Did anyone solve this?
I'm still having this issue. I also had the same issue when trying to download a large update for an app (43MB). I can download and install smaller udpates but I can't even download the large updates. I've checked all of my firewall settings and they are fine. I've turned off the firewall when trying to download the update and it still does not work. It just keeps saying that my network connection timed out.
I'm not at the stage where I can't install new apps because it requires the latest OS version on my iphone which I can't get! -
i am trying to restore my iphone after an ios update but keep getting a message saying it is unable to restore. PLease assist
The phone was jailbroken, wasn't it?
-
I've just upgraded to OS 10.8.6. Now when I try to export an ipages 09 document to .doc, I get the message "character borders are not supported and were removed," and the file is saved as .pages.
I think you would get more expert advice if you asked this in the iWork forum - its really an iWork question
G -
I have been trying to download a movie for several hours now and I keep getting a message saying i"could not load video"
Hello there, SteveShanaman.
The following Knowledge Base article provides some great steps for troubleshooting applications:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
Particularly:
Additional Information
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Sim card not supported after unlock iphone 5c
iphone 5c, 12.7 GB, version 8.1.1, after unlocking when i connect it to itunes w/ other sim, sim card not supported error registered,. i check it to IMEI and its unlock, but why icant use it? I try to restore to itunes and erase my iphone nothing works, what can i do?
How was the phone unlocked? Was it unlocked by your previous carrier? The only way to unlock your phone is to have your previous carrier unlock it for you.
If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
Get the phone unlocked properly by your carrier and there is no reason why it should not work. -
Hi All,
I have uninstalled iTunes from an IBM ThinkPad X40 running XP and I now get the iTunesHelper Error2 screen (Apple Application Support was not found). I do not want to re-install iTunes as I am now a mac user. However I want to get rid of the message from the XP machine as it is irritating and I want to use it standalone for something else.
Any ideas?
Cheers,
SouthcoteFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes. You can skip the reinstallation.
tt2 -
I bought a mac book pro in the UK and I now live in another country which is not supported by apple support. I want to contact apple support but I cannot find any telephone number or email to do so. any ideas?
http://support.apple.com/kb/HE57
And here:
http://support.apple.com/kb/HT1434 -
I have acer al1916w and i have a problem message that say input not supported help
i have acer al1916w and i have a problem message that say input not supported help
under windows 7 - 8.1right click on your desktop and choose screen resolution set a very basic resolution like 1280x1024 @ 60Hz (frequency can be set under advanced options); you need to have a working monitor to set this and then reboot connecting your al1916w. if it still gives you that message, can be a bad cable or some hardware monitor issue.
-
Trying to upgrade my iTunes to 10.5 but I keep getting the message "the URL could not be opened". What do I do?
Use this: http://appldnld.apple.com/iTunes10/041-2598.20111011.9Cp3o/iTunesSetup.exe
-
When I try to export an iMovie (9) to quicktime, the iMovie runs for a few minutes and I then get the message: The movie could not be exported because an error occurred. (-2125) What can I do to correct this?
Trash your preferences. Trash your project render files. Switch off background rendering. Export without using the computer for anything else.
Oh, and if you're using 10.9 switch off App Nap.
Maybe you are looking for
-
I have/had no trouble with Firefox at all. What I have is a new computer, with multiple users. I would like to use my relatively secure Firefox setup (i.e. NoScript with a LOT of configuration and site data stored, PrefBar and TabMix configuration, a
-
How do it know which backup files to keep and which to delete?
How do you know which backup files to keep and which to delete?
-
my database suddenly become unavilabe, I check the log file and i found error code ora-00600 and when i check the trace log file i found error error472. any suggest
-
Trouble with batch export from cd
a buddy of mine put some music on my i-pod, i downloaded it into i-tunes. When i batch export music into my project it works fine. I have been trying to do this straight from a music cd. It is not wanting to recognize the songs. Am i missing somethin
-
Guest network inside company network
Hi All, I have AirPort Extreme 4th generation which is configured inside company network to give access to internet and internal network for our emplyees. Right now it is working in Bridge mode and just forwards packages from wi-fi clients to DHCP se