IBook doesn't recognize my Airport Express password... Why?

I have a new Airport Express (802.11); my iMac and MacBook can log onto my new network just fine, but my old iBook (OS X 10.2.8) cannot.
My iBook recognizes my network, and using the AirPort assistant I tried to join my new network, but it says my password is incorrect. It is NOT! I created the password, and it is the SAME password that my iMac and MacBook use to log on.
Why does my iBook say my password is incorrect, while my other machines do not!? The Airport Express is suppose to work on a OS X 10.2.7 and above.
Thank you for any advise you can give me.
Regards,
kazbaker

Thank you much, Duane, for replying. I'm confused, though.
I understand from the AirPort Express - Technical Specifications listed online here:
http://support.apple.com/specs/airport/AirPortExpress_BaseStation.html
... that my AirPort Express SHOULD work with OS v10.2.7.
I have OS v10.2.8.
Is the information on that web page wrong?
Thanks again.
Kazbaker

Similar Messages

IMac with airport extreme doesn't recognize wireless airport express

I have an Airport Extreme that is functioning and want to extend my network via WIFi with an new airport express. The express is just accross the wall from the extreme but my iMac does not recognize it. I need all the help I can get on this one.

Start by placing the new AirPort Express in the same room as the Extreme and your iMac. Your iMac should now "see" the new Express on the dropdown menu of the AirPort icon on the OS X menu bar. Select the Express and the AirPort Utility should start up to allow you to configure the Express.

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Where do I find my Airport Express password?

How can I retrieve my Airport Express password?

If you have a Mac that can connect to your wireless network and you're using an Apple AirPort Base Station, then simply use AirPort Utility. From the Base Station menu, select Show Passwords...
If you don't have a Mac, reset your wireless network password by momentarily depressing the reset button on your AirPort Extreme, Express, or Time Capsule. Press the button for one full second, no more. Then, configure a new password using AirPort Utility.
If you can't connect to your wireless network, or you are not using an Apple AirPort Base Station, you can use the procedure that follows below to retrieve it from your Mac's Keychain.
Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

ICloud doesn't recognize my Apple id password

I just changed my Apple id password because someone else was listed under my email. After doing that, my icloud accound doesn't recognize my apple id password. FYI, when I went in to my account to change the password, I saw all the persons info, address, telephone etc. who was using my email account. How did that happen? All of my info was not there. So I took his out and replaced with my info. But then I couldn't get itunes or icloud to recognize my new password.

I had a very similar experience. I made a purchase last month. Everything was fine. Then I try to login two days ago and I can't. Nothing works. Can't reset my password, and when I try I never get an email with the new one.
I email apple support and they tell me that my email address (and apple ID) has been changed to some weird address. I reply and tell them that I never did this and never got an email saying it had been changed. They had me try to log in with the new email address (which I couldn't). Eventually they reset my password (still with the new weird email address) and I could log in. I then quickly changed the password and apple ID back to my email address. However, the billing info was weird. My street and city were correct, yet the State/ZIP and phone were all from New Mexico. It doesn't look like any purchases were made.
I am starting to think that there were no accounts hijacked here, otherwise we would have received an email when the ID was changed (as I did when I changed mine back). I think that something got corrupted in Apple's database.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

My Airport Utility doesn't see my Airport Express??

My Airport Utility doesn't see my Airport Express. . .so I cannot run iTunes. . it used to work fine. .

Version of utility, and express? Makes a huge difference.

How do I get my Ipad2 to recognize the airport express range extender

how can I get my IPad2 to recognize the airport express range extender?

Are you trying to scan "wirelessly"?
Adam

Why won't Airport Utility recognize my Airport Express? I'vetried re-booting router, Modem, reset button etc. It was working fine until I was asked to do an update. I got the Airport Express to stream Itunes to external Audioengine 5 speakers. 3 hrs!

I have tried everything for over 3 hrs. I purchase really good Audioengine speakers and an Airport express. Everything was streaming fine via Itunes until I was prompted to do an update yesterday. Now Airport Utility won't recognize the Airport Express. I tried everyhing. I have an older Mac desktop and simply wanted to stream music to the remote speakers. I tried reet button on the Airport express, re-booted my computer, modem, wireless router. Help!

Be sure you performed the "hard reset" correctly. The following is an excerpt from Resetting an AirPort Base Station or Time Capsule FAQ
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
Release the button, and the AirPort Base Station or Time Capsule will hard reset.
... but read the entire document to ensure you do it correctly. An Express that has been "hard reset" will create an open network with the name "Apple Network nnnnnn" where nnnnnn = the last few digits of its MAC address. Select that network.
If you do not see the network in your Mac's Wi-Fi menu with that name, the "hard reset" did not take effect, which will happen if you do not hold its little reset button depressed long enough. In that case do it again.
Following the "hard reset", reconfigure your Express.

Lost airport express password

Hi. I messed up. I lost airport express password. Can anyone help me out?
Thanks for your time.
Sincerely,
Pete

I know Time Capsule has a small reset button on the back. I'm not sure but I think the Airport Express does as well.
On Time Capsule, you could use something pointed (such as a ballpoint pen) to press down and hold the reset button until the status light flashes quickly (about 5 seconds). After that time, the password will reset to "public".

Adobe doesn't recognize my id or password

I have the Adobe Reader Installer icon on my screen, but Adobe doesn't recognize my id or password when I select to install Adobe Reader.......

http://helpx.adobe.com/digital-publishing-suite/kb/troubleshoot-content-viewer-digital-pub lishing.html

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

If you can connect to your wireless network and you're using an Apple AirPort Base Station, then simply use AirPort Utility. From the Base Station menu, select Show Passwords...
Or, reset your wireless network password by momentarily depressing the reset button on your AirPort Extreme, Express, or Time Capsule. Press the button for one full second, no more. Then, configure a new password using AirPort Utility.
If you can't connect to your wireless network, or you are not using an Apple AirPort Base Station, you can use the procedure that follows below to retrieve it from your Mac's Keychain.
Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

HT4437 i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

i want to play contents from macbook pro to B&W zeppelin air wirelessly,set up is done but can't see airplay button in iTunes,do i need airport express?why?please help.

There are at least 3 versions:
http://www.bowers-wilkins.co.uk/Support/Support/iPod_and_Computer_Speakers/Overv iew.html
Original Zeppelin - I've had this for several years.
http://bowersandwilkins.custhelp.com/app/home/p/6,26
Zeppelin Mini.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Mini/Overview.html
Zeppelin with Airplay.
http://www.bowers-wilkins.co.uk/iPod_and_Computer_Speakers/iPod_and_Computer_Spe akers/Zeppelin_Air/
(I wouldn't regard the MM-1 as a Zeppelin but not sure if B&W call it that).
I can't do much more to convince you!
You could always update that wiki
AC

Airport Express Password for mac and windows

i have airport express in my office and i have both windows laptops and mac's, i tried to setup a password for the airport and it succeed but the problem when i try to access the airport from windows it ask for password and i use my correct password but unable to connect on it. i am using 12 digital # for the password.
now i have removed the password and all the machines able to connect even the other companies are sharing my internet
is there any way to encrypt the airport? and i want each machine to be asked for the password.
thanks

Welcome to Apple Discussions!
One of the advantages of OS X is it has it's own password manager called Keychain Access. Unfortunately Windows doesn't have an equivalent so you have to rely on third parts applications like Roboform. To locate Keychain Access simply click Command-Spacebar and type Keychain Access and Spotlight will locate it.
There is another tool you can try that has gotten pretty good reviews, it is:
http://download.cnet.com/1Password/3000-18501_4-95581.html
I'm not aware of any third parts apps that work on both Windows and OS X so you may be forced to use two solutions.
Regards,
Roger

Iphone will not recognize an Airport Express extending a wireless network

Hi. I asked elsewhere in the support community and someone suggested I also ask here. I have two Airport Expresses, one in my living room that is creating a wireless network, and another in the back of my house, extending a wireless network so it will reach in to the back yard. The one in the living room is the new 2012 model, and the one in back is the pre-2012 model. They both have the latest firmware, and I configured them both using the Airport Utility, and can confirm they are working as configured, to create and extend a wireless network.
My mid-2010 Macbook with Lion shifts between devices effortlessly, switching to the stronger signal when I move between the house and the back yard. I can verify this by selecting Option+Click on the wireless widget in the menu bar and checking the BSSID against the Airport Utility. But the signal from the living room unit still reaches in to the back yard, and as far as I can tell, and the iPhone 4S cannot recognize the existence of the extending unit (outside of the Airport Utility). I know the former is a well-known problem, the iPhone is unique in that it will annoyingly hold on to the existing connection for dear life, even when a stronger one is available. I thought I could work around that by power cycling or disabling/reenabling Wi-Fi when out of range of the living room unit to get around that problem but even that doesn't work.
When I go some place out of range of the living room unit but still within line of sight of the back yard unit, say the neighboring field, the laptop can connect to the back yard unit with about -75 RSSI, but the iPhone does not even see the wireless network. Even after a power cycle at that location. If I approach my back yard from the field while constantly scanning Wi-Fi (switching between the front pane in the Settings app and the Wi-Fi pane), the iPhone does not see my network until it sees the living room unit, at which point it tries to connect, and the Airport Utility shows the iPhone is connected to the living room unit, not the back yard unit. This is in contrast to the Macbook which both sees the extending Airport and happily connects to it when it has better signal than the living room unit.
Any idea why the iPhone cannot see the extending Airport Express but the Macbook can?

Anyone? Has anyone had experience with this problem? I've reset the extending Airport and reapplied the settings and still have the same problem.

IBook doesn't recognize my Airport Express password... Why?

Similar Messages

Maybe you are looking for