ID changes not refreshed

When I make the changes to ID, I am getting problem message in cache notifications..
For ABAP Cache ,
Unable to notify integration runtime (ABAP) of data changes
Unable to establish http connection https://server:port/sap/xi/cache_ssl?sap-client=300
For Central Adapter engine, I am getting the following message..
Unable to contact Adapter Engine "af.xis.server" that is affected by the data changes
Unable to establish http connection  https://server:port/CPACache/invalidate
What are the possible causes of such error? how do I resolve this?

Apart from understading what are "the changes to ID" (?), I'd suggest you check you have enabled SSL in your ICM.
For ABAP stack, go to SMICM transaction and check under Services that in addition to HTTP and SMTP you also have HTTPS (it doesn't come by deafult). Also, check in transaction SICF that /sap/xi/cache_ssl node is enabled.
For J2EE stack, bring up Visual Admin and under Server-Services-HTTP Provider make analogous checks.
I think your main problem is you're using https. Is that really required? If not, go to exchange profile and change https addresses to http.
Let me know.
Alex

Similar Messages

  • Process Context changes (.XSD) are not refreshed in the Task Mapping

    Hello,
    I'm adding new attributes to the .XSD but the changes are not refreshed in the mapping section of the tasks. How can I refreshed these changes?
    Best Regards
    SU

    Hi,
    You can manually reimport DO xsd by :
    Your BPM Project > ProcessModeling > Data Types folder > XSD Files folder > Right click xsd file> Reimport.
    You can manually reimport WS wsdl by :
    Your BPM Project > ProcessModeling > Service Interfaces folder > WSDL Files folder > Right click wsdl file> Reimport.
    Regards,
    Unni

  • NWDS WebDynpro views are not refreshing after changes in layout...

    Hello experts..
    I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
    This program cannot display the webpage
    Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address.
    Go back to the previous page.
    More information
    In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
    Thanx in advance..
    JV

    Hi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
    I'll let this question unanswered until this fix comes out.
    Cheerio !
    JV

  • NWDS view not refreshing after changes in layout

    Hello experts..
    I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
    This program cannot display the webpage
       Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
    What you can try:
         Check your Internet connection. Try visiting another website to make sure you are connected.
         Retype the address.
         Go back to the previous page.
         More information 
    In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
    Thanx in advance..
    JV

    Jesus,
    Do you have IE7 on your machine??  IE7 with a certain patch causes this issue.
    Check this thread for more details
    Probblems Net Weaver Developer Studio (NWDS) caused by Internet Explorer 7
    Chintan

  • Random announcements not changing on refresh

    I've set up an announcements module in a sidebar to display one random item. This sidebar appears on most pages and when you visit different pages the item changes as it should. However, if you go back to a page you've previously looked at, the item is the same as it was when you first visited that page and doesn't change no matter how many time you refresh the page. I assume the browser is caching the page, but shouldn't the item change on refresh? Is there a way to force it to change, particularly if you've gone away from the page and come back to it again?
    Here is the code I'm using for the tag:
    {module_announcement filter="random" template="/ModuleTemplates/Testimonials/custom.tpl"}
    Any help is appreciated.

    BC has commented on this before - It is to do with performance caching. When your viewing and testing and reloading many times etc - This is not a real world live example of a persons use. So it may be the case you not see the item updated. Go to a different browser and you will very likely see a different one.
    The other factor to also consider is the number of items - If you only got 4 items then the likelihood one will show up over and over is very high.

  • Party Shuffle Not Refreshing/Changing after running Genius on 8.0.2

    Ever since running a few Genius playlists, the Party Shuffle feature is stuck. I change playlists, hit refresh and it stays locked on the last Genius playlist. Very weird. I've restarted iTunes several times too.
    Anyone else?
    I'm running an old iMac G5 on 10.4.11 with iTunes 8.0.2 (20)

    Another thing -- I just rebooted my computer and got the same thing: opened iTunes and I still have absolutely no control over the party shuffle. It's stuck on the last Genius list. Changing lists, refreshing does nothing.
    Is my iTunes DB corrupted or is this a nice bug that they'll fix in 8.0.3 (please!).

  • Can not refresh the metrics in schedular

    Post Author: sachinddalal
    CA Forum: Performance Management and Dashboards
    Hi,
    When I refresh the metric using schedular, the metric is not refreshed , nor schedular return any error. But when checked in metrics proparties, the last refresh date is not changed, niether the values are updated.
    Whe I try to refresh the metric manual, the values are refresh.
    Please help me to troubleshoot the problem of refreshing metric through schedular.
    Thanks,
    Regards
    Sachin Dalal

    Post Author: jezbraker
    CA Forum: Performance Management and Dashboards
    Scheduler is pretty horrid for refreshing metrics.Better of to use the Rules engine and create a rule thats based on a schedule that based on condition (1=1 works well ) then refreshes metircs.troubleshooting is best done with the trace options in setup/parameters.there are a few other ways or seeing what the schedulers up to - but id stick to rules if i were you.

  • Report Portlets do not refresh data.

    How can I refresh a report portlet?
    I have created a report and a forms provider based on the same table. I put the portlets on separate TABS on the same PAGE. The report works fine, but when I update the information on the form and return to the report it does not reflect the changes. I have pressed 'refresh', I have gone to another page and come back, no luck. The only way to see the changes is to log out and back in again. Any ideas?
    Thanks, Deb

    I had caching turned off. When I turned on both content and page definition, I was unable to query my forms. The forms and reports are on the same page, different tabs. When I select cache page definition only, I get the same results as no caching. The forms will query my data, I can update, but when I return to the reports TAB, the data has not changed. (Yes, I did click refresh.) I have found that if I click the 'Customize' link on the portlet containing the report and then click 'OK' the data will update. This, however gives me a new error that I will worry about later. For now, the users have 'Minimize' but do not have the 'Customize' Link and the 'minimize' link does not refresh the data, nor give me the new error.

  • Workbook not refresh after running Planning Function (BI-IP)

    Hi! Folks,
         I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
    Step 1: Run Planning Function (There are some changes in records)
    Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
    Step 3: The changed records will be shown...
    Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
    Brgds,
    Supasake

    Hi,
    I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
    I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
    D

  • Database View do not refresh in ADF application

    Greetings,
    im facing a weird problem in my application (JDeveloper 11.1.2.4.0 - ADF). All this time i was working directly with tables (VO), but now i also started using database views.
    Everything works fine, when i add a new row in a table that my Database Views is associated with, it refresh properly.
    BUT if i delete rows manually from my database, the View do not refresh in my application, not by refreshing the page,
    redeploying application, even executing the view object query inside the view object. The only way for the DB View to be
    refresh inside the JDeveloper and on deployment time is by restart JDeveloper. I try adding an action on my OV to re-execute them when
    i do something specifically, hopefully the will reset the cache and retrieve the DB view again, but with no luck..
    Correction: now it doesnt even refresh on restart jdeveloper.
    Just for the clarification, im talking about Database Views, and not just Object Views. I create a Object View inside the application to retrieve the data
    from the Database View results.
    Can you help me on this please?

    Yes the queries in SQLDeveloper was showing me correct results.
    But i feel disappointed.. When i went to close SQLDeveloper to try something, it pop me a message to commit/rollback changes.
    After i commit them, my app show correct results too.

  • Advanced Table does not refresh after database level action

    Hi,
    I have a page which has an advanced table. I update the advanced table from the page do some validations, update some DB level columns(also part of advanced table) and see that the changes are saved to the DB but the advanced table does not show the updates done at the DB level.
    I tried clearing the VO Cache and re-executing the VO but still it does not refresh the Advanced table data.
    This is very critical requirement for the client, any inputs will be greatly appreciated.
    Thanks a lot in Advance.
    Here is the code snippet from my CO's processRequest:
    OAApplicationModule am = pageContext.getApplicationModule(webBean);
    OAAdvancedTableBean tblbean = (OAAdvancedTableBean)webBean.findChildRecursive("recasttable");
    if(tblbean!=null)
    tblbean.setRendered(true);
    OAApplicationModule tblam = (OAApplicationModule)am.findApplicationModule("RecastLineAM1");
    tblam.invokeMethod("initQuery");
    tblbean.getTableData();
    Here is my AM - initQuery() code:
    public void initQuery()
    //clearVOCaches("RecastLineEO",true);
    clearVOCaches(null,true);
    getRecastLineVO1().init();
    Here is the VO - init() code:
    public void init()
    System.out.println("****************************executing...");
    OADBTransaction tx = (OADBTransaction) getApplicationModule().getTransaction();
    if (tx.getTransientValue("RECAST_ID") !=null)
    Number recastId = (Number) tx.getTransientValue("RECAST_ID");
    System.out.println("recastId: "+ recastId);
    setWhereClause("RECAST_HDR_ID = :1");
    setWhereClauseParams(null); // Always reset
    setWhereClauseParam(0, recastId);
    executeQuery();
    }

    hi,
    This is how I am calling a DB package. the package does updates on the table. once done I am issueing a commit and requerying the data, however the vo is not getting refreshed.... Can someone point out what am I missing... why is the VO not getting refreshed....
    This is very critical...
    Thanks
    Srini
    public void validateRecast(String respKey)
    OADBTransaction tx = (OADBTransaction)getApplicationModule().getTransaction();
    Number recastId = (Number) tx.getTransientValue("RECAST_ID");
    System.out.println("*********************validateRecast().RecastId: " + recastId);
    OracleCallableStatement ocs = null;
    Connection conn = tx.getJdbcConnection();
    String strOut="", strErr="";
    Number respId = null;
    try
    respId = new Number(respKey);
    catch(Exception e)
    throw new OAException("Invalid Responsibility");
    String stmt = "BEGIN " +
    "GE_RECAST_UTILS_PKG.validate_recast(:1,:2,:3,:4); " +
    "END;";
    try
    ocs = (OracleCallableStatement)conn.prepareCall(stmt);
    ocs.setNUMBER(1,recastId);
    ocs.setNUMBER(2,respId);
    ocs.registerOutParameter(3,OracleTypes.VARCHAR);
    ocs.registerOutParameter(4,OracleTypes.VARCHAR);
    ocs.execute();
    strOut = ocs.getString(3);
    strErr = ocs.getString(4);
    ocs.close();
    System.out.println("Returned with: " + strOut);
    if(strOut.equalsIgnoreCase("ERROR"))
    //throw new OAException(strErr);
    tx.putTransientValue("ERROR",strErr);
    tx.commit();
    getApplicationModule().clearVOCaches("RecastLineEO",true);
    RecastLineVOImpl lineVo = (RecastLineVOImpl)getApplicationModule().findViewObject("RecastLineVO1");
    lineVo.init();
    System.out.println("===============RecastLnId: " +lineVo.first().getAttribute("RecastLnId"));
    System.out.println("===============Product Line: " +lineVo.first().getAttribute("ProductLine"));
    catch(SQLException e)
    tx.rollback();
    if(ocs!=null)
    try
    ocs.close();
    }catch(SQLException e1)
    throw OAException.wrapperException(e1);
    throw OAException.wrapperException(e);
    }

  • Matrialized view not refreshing all records from source.

    My materialized view is not refreshing a fixed number of rows i.e 198 every time from source to target.What are the reasons for such behavior. Also what should i do to resolve this discrepancy.
    My mv is a FAST REFRESH ON DEMAND based on ROWID.
    It has a simple sql query select col1,col2,col3 from testschema.mytable@mydb;
    Thanks,
    Sandesh

    Hello Raman & KV,
    Thanks for your Suggestions.
    Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
    So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
    Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
    Cheers
    Shiva

  • Excel 2010 Pivot Table VBA Not Refreshing Table

    My company recently upgraded from Excel 2003 to 2010. I had VBA written to take source data and convert it into a number of Pivot Tables on a number of worksheets. It has been working fine for years. After upgrading to 2010 the VBA crashed. I tracked it
    down to the fact that when my code was making changes to the Pivot Tables (changing fields, filters, etc...) the pivot table on the worksheet had no data, but the fields were there. I can manually go to the pivot table and manually refresh and all the data
    comes in.
    So I tried adding the VBA code to refresh the pivot table, but the pivot tables will not refresh with data.
    I tried:
    ActiveSheet.PivotTables("WO Pivot").RefreshTable
    and
    ActiveWorkbook.RefreshAll
    And these did not work.
    I also tried recording a macro for the manual steps to refresh and got:
     ActiveSheet.PivotTables("WO Pivot").PivotCache.Refresh
    This does not work either.
    The PivotTable name is correct, but I tried using the number as well, and the name works for other code manipulating the the pivot table.
    e.g.:
    With ActiveSheet.PivotTables("WOPivot").PivotFields("Task Title")
          .Orientation = xlRowField .Position = 2
          .Subtotals = Array(False, False, False, False, False, False, False, False, False, False, _False, False)
    End
    With Why isn't this working? Is there another way to refresh pivot table data in 2010?
    Thanks. P.S. I've tried formating this so it is readable, but it comes out garbled. Hope this looks better.

    The solution above didn't work for me, but the following did the trick:
    ActiveSheet.PivotTables("WOPivot").PivotCache.Refresh
    By the way, I identified it by recording a macro, then going on the Pivot Table that needed refreshing and pressing F9 to refresh it. The line of VBA code above was the result.
    Cheers,
    Marco.

  • Crystal Report Not Refreshing in browser

    Hi all,
    Am using crystal report for my web application so here am passing my parameter from jsp page
    but it is not refreshing
    For example
    I am select Month=jan my query goes this way.
    Select * from employee where month='jan' group by department order by designation
    when am intially design in eclipse in filter option am selecting 'jan' and when am running in browser am passing the same query with the parameter but here instead of 'jan' am passing month variable where my month variable changes every time according to user choose
    my crystal report is not getting refreshed ..
    hope u understood my problem
    Regards
    Vanishree.B

    Hi Tejomay ,
    I have tried that even after calling refresh() , it ;s not getting refreshed..but if am using signal table in my query  it is getting refreshed .but when am grouping with another table it is not refreshing..
    Regards
    Vanishree

  • SkillBuilders modal plugin - Reports will not refresh

    Hi all,
    I'm attempting to use the SkillBuilders Modal Page 2.0.0 plugin, everything seems to work except the refreshing of the reports. When clicking on the links the modal page opens, I can make changes, and after clicking on "apply changes" the modal box closes and I am back at the originating page, however the reports have not refreshed. If I manually refresh the page or the reports - the reports change as expected. I believe my problem is in the Auto Close Dynamic action, but I can't seem to find it. There isn't any errors displayed in the error console either. Any suggestions? Thanks in advance
    SkilBuilders Modal Page 2.0.0 plugin
    Apex version 4.2.1.00.08
    Theme 26 - Productivity Applications
    Page has 3 reports - 2 classic and 1 IR.
    Each report has a link with the class "edit-link"
    Dynamic action (Edit Clicked) is set up with:
    Event: click
    Selection Type: jQuery Selector
    jQuery Selector: a.edit-link
    Condition: No Condition
    Event Scope: Static
    True Actions settings are:
    URL Location: Attribute of Triggering Element
    Attribute Name: href
    Auto-close On Element Selector: section#uSuccessMessage
    Dynamic action (Modal Page Auto Close) is set up with:
    Event: Auto Close [SkillBuilders Modal Page (2.0.0)]
    Selection Type: DOM Object
    DOM Object: document
    Condition: No Condition
    Event Scope: Static
    3 True Actions settings are:
    Action: Refresh
    Selection Type: Region
    Region: "Name of Region"
    Thanks
    Wayne

    Hi Wayne,
    You've got a job on trying to refresh a classic report using the standard dynamic action, it's not as straightforward as simply selecting the region.
    The fastest way to achieve this (unless you MUST have AJAX refreshing of reports) is to change the action of the Auto Close event to Submit Page.
    It's quick and dirty - but it works.
    Hope this helps, cheers, Pete

Maybe you are looking for