IDE Ports Working ?

How can I check if all the ID Ports on my MoBo are working ??  One of the PORT is working... but none of the other ports are working, I mean I connect the second HDD, and it isn't detected.
I have MSI 915G Combo MoBo

 Have you tried your original HDD on both IDE's (only 1 HDD) to test?

Similar Messages

  • I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing? The output sound settings are showing as digital optical only? Any ideas :)

    I cannot hear any songs or movies from my laptop speakers - the headphone port works and a red light is showing from the port? The output sound settings are showing as digital optical only? I used the headphones in the laptop for the first time yesterday and have had this problem ever since. Any ideas

    The internal switch in the audio output port is stuck.  Try inserting the earphone plug a few times.  If no success, try jiggling a tooth pick inside in order to trip the switch.. If still no success, have the technicians at the Apple store genius bar do it for you.
    Ciao.

  • Why does my CF port work but not my SD

    I have been fudging with my machine for days trying to figure this out. the CF port works great when I put a card in it but if I put a card into my SD slot and click on the drive in explorer it says 'please insert a disk in drive E:'. I have done all the latest updates and cannot figure this out. Could I have a dead SD port? Any ideas would be great.

    the card reader will show as two removable drives, one for the CF reader and one for the SD/MS/MMC reader
    if you only have one removeable drive listed, then try unplugging the connector from the mobo and reconnecting that usually does the trick

  • Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows through parallels.

    Control key not working on MB Pro while connected to windows 2008 server through 2x client. Any ideas? Works on windows XP through parallels desktop.

    Hello...
    It seems I got it fixed!! I had been trying the Fixit tool from
    http://support.microsoft.com/kb/306759  while typing up there :))))
    This tool is for changing RDP port but running it fixed my problem (I kept the port 3389 intact)!!
    Hope it helps someone.

  • How to get 2 lans ports working on K8N Neo2 platinum

    I can only get the one lan port working which is the realtek device. Ive tried installing drivers for the marvel lan but it doesnt show up in device manager. Can any one tell me how i get this second lan port working.
     

    Quote from: Justmeto on 02-July-06, 05:02:54
    I can only get the one lan port working which is the realtek device. Ive tried installing drivers for the marvel lan but it doesnt show up in device manager. Can any one tell me how i get this second lan port working.
    The other network interface is by nVidia -- the Marvel part is just the PHY for the nForce3 NI -- and the drivers should install with the nVidia driver install.  Which nVidia driver package are you using?  People have had NI trouble with the 5.11 pack - personally I use the 5.10 pack with the 4.79 IDE/SATA drivers which you should be able to find here: [urlhttp://downloads.guru3d.com/download.php?id=19[/url].  In BIOS Setup under Integrated Peripherals, what's labeled MAC Lan(nVIDIA) is the one you want to make sure is on Auto.

  • Only 1 firewire port working on every dock's I have

    Hello,
    I spent 1 entire day trying to find a solution for this problem and..nothing.
    I read foruns, discussions everything. Tried a lot of solutions.
    I have 2 docks:
    - 1 go flex desk firewire 800
    - 1 Icy Box dock fireiwire 800
    Both have 2 firewire ports.
    In both of them, only 1 firewire port works. Both docks have 1 firewire port not working.
    This means that if I want to copy files from one hard drive to the other by firewire... its not possible!!
    Anyone here have this problem and found a solution??
    I am really getting crazy with this. I don't believe both of the docks are faulty...maybe they are but after everything I readed here I believe it's probably a macbook problem.
    I have mackbook pro i7 15" 2011.
    Oh, I should say that this worked before... some weeks ago this was working and I have no idea why only one firewire port works now...
    Any other solution I should try? Already tried all that pram a smc resets...

    I also receive text notifications from her on my iPad.
    On my Mac, I have messaging shut down

  • K7N420 IDE ports

    I've got a K7N420 that I've just built; AMD XP 1800+. It is intermittently detecting the CD-ROM. I've tried 2 different CD-ROMs and cables. When I go into CMOS, it will detect the CD-ROM but when it reboots ... nothing. Rather then wait for a warrenty replacement, does the K7N420 support indenpent timing on the IDE channels? The last then I want to do is slow down the system by having the Hard drive & CD-ROM on the primary side.

    Hi CaptDHH -
    Check your jumpers first -- but, failing that:
    Sometimes ATAPI devices are a little slow to respond when the IDE ports are polled at system startup.  I've experienced this problem with several different motherboards and CD/DVD drives.
    One way I've found around it is to set the IDE port which the ATAPI device is connected to NONE so that it doesn't get polled by the BIOS.  Windows will detect it during the boot and the device will be available once Windows loads.
    Doesn't seem logical but it very often works.
    Jef

  • Left most usb port works with usb 3 devices but not with usb 2 devices

    Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

    Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

  • My ipod touch 4 won't sync or register on my computer. The cord works, the usb port works, and when I plug my ipod into the wall to charge it work, but when i plug it to the computer nothing, not even charging. P.S. worked before I updated it.

    The cord works, theusb port works, and when I plug my ipod into the wall charger it works, but when I plug it into the computer, nothing, not even charging. P.S. it worked before I updated it to iOS  6.1.5

    You do have iTunes 10.7 or later on the computer, right?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • GS70 2QE - Help needed.... non of my USB ports work :(

    Hi guys and gyals...
    First time posting here and I wish it was in a positive light but unfortunatley I have an error on my laptop thats preventing me from using it.
    So I purchased a GS70 2QE with 970m and 4720 processor. I was very happy for the first two days with its performance until the time I had to use the USB ports. I realise that non of them work at all. Im normally quite good at solving tech issues but this one is going beyond me. Ive done updates on all intel/windows/nvidia drivers as far as I can tell, plus Ive checked the BIOS for usb settings and they are all enabled. Ive switched off the power saving for usb function as well as doing TWO complete reinstalls of windows and still I have no usb.
    On the device manager all usb devices seem errorless except one... 'unknown USB device (link in compliance mode)', might I add that nothing is plugged in at this time. Clicking on this brings up the following:
    "Windows has stopped this device because it has reported problems. (Code 43)
    The SuperSpeed link to the USB device keeps going to an error state Compliance. If the device is removable, remove the device and then disable/enable from device manager to recover."
    Ive attempted to uninstall all usb devices and reboot yet windows just reinstalls the same things and I get the same issue.
    Now unfortunatley MSI arent so great. Ive called their UK support number 4 times and its just rang through after 30 mins each time. I have also sent an email to support.... no response.... What the hell is this all about... when I purchase a machine thats this expensive I kinda expect some support value.
    Anyway Im in limbo now, cant work, cant game, cant do anything but browse the net with my trackpad. Other than this issue Im happy with the laptop.

    Im on win 8.1 out of the box. On 8.1 page theres no drivers for usb 3.0. Now I know there is a problem whereby intel havent released drivers for usb 3.0, all drivers are being given by microsoft as I understand, and the only work around is to use win 7 drivers that are edited. Now I have tried this and while the extensibile host controller accepts the new driver it still doesnt make the ports work. Im hoping that this issue with intel and usb 3.0 is the problem as I would like to solve this out as a software problem as opposed to sending it off for a hardware fix.
    After your post I downloaded the win7 usb 3.0 drivers and eventually edited them as per this page:
    Google search: plugable windows 8 and host controllers
    As I stated above, no luck....

  • PRIMARY IDE not working after flash

    Hi ,
        i recently had some freezing and restart problems while using turbo and ultra turbo modes ,as my memory timngs were different i used a setting of CL 2,3,3,5,8
    V 2.70 ...it used to run fine till i got some freezes and restarts ...at the moment it now runs normally with the above timings V @ 2.70 ..turbo mode and OC set to private or dusabled in bios ...no freezes...basically have tried most possible options..i now dont OC to anything above private because i use the stock heatsink and no cooling whatsoever...i can use the RAM in TURBO and ULTRA-TURBO modes ...anyway my problem is that LIVE MONITOR-LIVE UPDATE (auto search) was freezing and not detecting my bios version ..it still freezes at "processing" ...so recently i tried a flash through windows...the startup and other utilities show the bios version etc ok as AMI  V2.5 ...the bios flash seemed ok and everything else seems to be working fine ..but now my IDE MASTER doesnt work correctly i have 2 DVD RW drives and two hard drives ....when i connect any two of the drives on the SECONDARY IDE in any combination the system boots ok but when i try to connect all four (two dvd/cd's and two HD ) ..the startup feezes after recognizing the secondary and in fact even one CD drive on the primary ..but then the boot sequence freezes..it doesnt show the second drive..and the D-BRACKET LED's freezes at "initializing floppy drive controller" EVERYTIME and the system will not boot...i have tried a reflash..same story...i cannot get the PRIMARY IDE to work....has it failed ? ....thanks in advance

    tried flashing to older version 2.4 that didnt work ...flashed back to version 2.5 ...still wont work ....boot sequence freezes at the same point..wont go beyong detecting one drive on primary ,no problems on secondary.....also the strange thing is that live monitor cannot detect and stops at   "search mainboard bios version " and wont go beyond that ,but working through live update 3 (newest) the bios version is shown...i have been flashing through windows  should i try through DOS/Floppy ?

  • Does the HDMI port work on the Cisco set top box?

    I just bought a new tv (LG model 24MA31D) and the Verizon tech hooked up the FIOS set top box to it using the composite cables that came with it. The tv only has one set of ports for the 5 cables. To use my Wii I have to either trade out all the cables each time or use a 4-device component video selector I bought at Best Buy. The guy at BB said if the set top box has an HDMI port then I can just connect it to the tv with an HDMI cable and leave the Wii connected via cables. 
    I've seen some discussion on here that the HDMI doesn't really work on the set top box.  Is this true? Sure would be nice to have fewer cables and one less electronic device. Thanks in advance for your help!

    You didn't tell us which model of Cisco STB you have; however chances are very good that the HDMI port works and works well.
    Don't by HDMI cables at Best Buy.  You can find them online for 1/10th the price.  No need to pay for gold plating, all it does is gold plate some rich guy's pocket.
    Buy a HDMI cable or three and don't look back.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Does the ethernet port work when the using airport express in client mode?

    I am considering using an airport express to extend my existing wireless network to a room where I can't get a cable to.
    I will need to connect a at least 3 devices to the airport express.
    The questions are:
    - is an airport express the right answer to this problem?
    - if so, does the ethernet port work (AE on client mode) as a passthru into the main network?
    - can I plug a hub to it?
    Thanks
    RFSF

    Hi Tesserax,
    Really appreciate you taking time to respond.
    I stopped by the Apple store this weekend and one of their sales people ( not one of their genius bar people) told me NO to all questions.  I tend to believe more answers from people in this forum but just realize that I have not mentioned one possibly important point:
    the main AP to which I will be connecting the airport express is not an Airport Extreme/Express AP. 
    Thanks,
    Ricardo.

  • I did factory install on my hp probook 4520s and usb ports worked

    did factory instasll usb ports worked after restarting it saids usb ports cannot start in deviice mangager

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Can Minidisplay Port work with the new Thunderbolt Display?

    I have a 2009 MBP 15 inch with Mindisplayport.
    Can Minidisplay Port work with the new Thunderbolt Display?
    If not, is there any adaptor i can use to make it work.
    I also have the new MBA with thunderbolt socket.
    Cannot decide which display to get.
    Thanks.

    Here's a new article that basically covers and clears up all the new Thunderbolt display questions (same things I previously stated).
    Enjoy!!
    http://www.tuaw.com/2011/09/18/thunderbolt-display-daisy-chaining-spec-cleared-u p/

Maybe you are looking for