PRIMARY IDE not working after flash

Hi ,
i recently had some freezing and restart problems while using turbo and ultra turbo modes ,as my memory timngs were different i used a setting of CL 2,3,3,5,8
V 2.70 ...it used to run fine till i got some freezes and restarts ...at the moment it now runs normally with the above timings V @ 2.70 ..turbo mode and OC set to private or dusabled in bios ...no freezes...basically have tried most possible options..i now dont OC to anything above private because i use the stock heatsink and no cooling whatsoever...i can use the RAM in TURBO and ULTRA-TURBO modes ...anyway my problem is that LIVE MONITOR-LIVE UPDATE (auto search) was freezing and not detecting my bios version ..it still freezes at "processing" ...so recently i tried a flash through windows...the startup and other utilities show the bios version etc ok as AMI V2.5 ...the bios flash seemed ok and everything else seems to be working fine ..but now my IDE MASTER doesnt work correctly i have 2 DVD RW drives and two hard drives ....when i connect any two of the drives on the SECONDARY IDE in any combination the system boots ok but when i try to connect all four (two dvd/cd's and two HD ) ..the startup feezes after recognizing the secondary and in fact even one CD drive on the primary ..but then the boot sequence freezes..it doesnt show the second drive..and the D-BRACKET LED's freezes at "initializing floppy drive controller" EVERYTIME and the system will not boot...i have tried a reflash..same story...i cannot get the PRIMARY IDE to work....has it failed ? ....thanks in advance

tried flashing to older version 2.4 that didnt work ...flashed back to version 2.5 ...still wont work ....boot sequence freezes at the same point..wont go beyong detecting one drive on primary ,no problems on secondary.....also the strange thing is that live monitor cannot detect and stops at "search mainboard bios version " and wont go beyond that ,but working through live update 3 (newest) the bios version is shown...i have been flashing through windows should i try through DOS/Floppy ?

Similar Messages

Lenovo s820 - not working after flash

Hello.
I wanted to flash rom via sp flash tools. Got some problems before with flashing right one - i looked over the internet and tried some, but non wanted to flash. Then i found rom row s137 from here (http://www.indragunawan.com/2013/09/installing-miui-v5-rom-on-lenovo-s820.html) - it flashed - whole process like in all tutorials. Then i wanted to get inside cwm recovery - but new error appeared - s_ft_enable_dram_fail (4032). After few more tries (cuz tut said that i shouldnt turn on before doing it) i wanted to turn on phone just to look if its working - it didnt.
For now ive tried i think all roms from needrom.com and from this forum - i dont know what to do... Thats my gfs phone and i wanted to make it without all those funny chinese symbols - wanted to flash miui... And even if i plug in charger - it doesnt light up to this funny red light... enev turning with vol up or down does nothing...
Can i do anything with it?
ps. i think that my computer does have problem with recognition what is that device i conect while i want to flash threw sp tools - so thats why i have all the time the same massage - but thats only what i think - ive tried even other phone drivers - nothing... :<

Your question might be best answered by contacting Lenovo Support directly.
English and Hindi
(Primary) 1800-419-7555 (Tata) (Secondary) 1800-3000-5366 (Reliance)
10:00 - 19:00 Monday - Saturday Except Holidays
For Email support.... http://support.lenovo.com/in/hi/emailformforpc
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Flash player does not work after I installed it

Flash player does not work after I installed it

I'm using Mac Osx and my browser is Safari
Date: Wed, 5 Feb 2014 00:41:29 -0800
From: [email protected]
To: [email protected]
Subject: Flash player does not work after I installed
    Re: Flash player does not work after I installed it
    created by Mike M in Installing Flash Player - View the full discussion
This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
What OS are you using?
http://mmonlinedesigns.com/images/os.png
What browser?
http://mmonlinedesigns.com/images/browsers.png
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Adobe Flash Player 11 NOT working after several attempts to download, uninstall, & reinstall

I have problems with Adobe Flash Player 11 NOT working after several attempts to download, then uninstall, & re-install.
I uninstalled the previous versions of Adobe Flash Player from my computer PRIOR to attempting to install the new 11 version, so now I'm unable to view videos, etc.,
I'm using Windows Vista 32 bit, Internet Explorer 9.0 (which I closed when I got error messages during Adobe Flash Player 11 Installation. I've disabled my AVG -Virus also during the installation of Flash Player 11.
FYI, I'm not computer savvy so the YouTube video by Adobe Tech was too complicated to follow AND I'm unable to view (DUH!) it since I have no Flash Player program installed (doesn't make sense!) .
Thanks for keeping it simple (KISS for me).

I've tried uninstalling and reinstalling some 30 times now ..rebooting, you name it.
I haven't been able to use flash since Adobe kindly shoved that latest update down my computer's throat.
Right after getting the 'successful' installation message I restart IE9 ..go to my channel on youtube and immediately get the message:
The Adobe Flash Player is required for video playback.
Get the latest Flash Player
I tried Chrome and on two or three it worked but then even after closing out of them ..Chrome slowed down to a crawl and finally informed me that Flash had stopped working.
This has entirely wasted 3 nights of my time. It is 2:30 am and I should have had at least 2hours sleep already to rise at 6:30 but no, thanks this I'm still up and no doubt millions of other computer users are having just as much fun.. Everyone I know that allowed the updates to install ..is having the same problem ..Chrome/IE9/Firefox ...you can truly call it Adobe's Universal Cluster ...
I live with Adobe. At work we have 6 fully Adobied LR4/CS5 & 6/InDesign workstations. I'm a photographer using nothing but Adobe products and quite frankly I feel this is the worst treatment you have ever given your customers.
Please stop the CYA and just fix the damm thing! I realize you didn't write it Chris but surely you can get Adobe management to address this instead of just trying to get their users to try and debug it for the airheads that released it. Has anyone stopped to consider the financial damage being done due to videos not playing the ads that support the sites and no doubt stream revenue to Adobe? These guys have rolled the online experience back 5 years minimum and Adobe will probably pay the price for it. Re-issue a working version and go back to the drawing board!

VIBER is not working after updating android 4.3 on my Experia SP.Any idea or solution ?:-)

Viber is not working after updating my Xperia SP to new Android 4.3There are totally confusing simptoms: I can not hear the other party, the other party can not hear me , I can not answer the call even when I try to or the other party can not answer my viber call even if they try to. CAN SOMEONE HELP or HAVE ANY IDEA :-)

I also had problems with xperia sp after updating to 4.3 - phone was slow to an extent of being unusable. However, even before update (on firmware 4.1) I found the phone quite slow.I am very happy that I returned the phone to my carrier in exchange to nexus 5. When I got hold of it I really felt the change in responsivenes compared to sony. I cannot recommend it more - it has all the sony has + better responsivness, better screen, better battery life (yes, I have tested this), better camera minus bloatware. I got all of this for paying 50 eur more. That was my second and last phone from sony. After having sony xperia S for 1 week and returning it because of wifi problems and after trying xperia sp and again returning it because of crappily written firmware I really wonder what are people at sony thinking about. People, don't you see that sony does not give a **bleep** about customer satisfaction after getting their money? Of course, you can downgrade manually, but don't forget that this voids your warranty - staff at service centre would be more than glad to tell you you have just voided your warranty because you brought them phone that you had to downgrade because of crapilly written UPgrade!. In addition to that downgrade means spending your a couple of hours of your precious time correcting mistakes of multinational corporation that simply does not give a **bleep**. Throw your sony into trash instead, and use those hours to earn money with which you can buy new phone that will actually work.

Card slot does not work after update (14/10/2011)

Card slot does not work after yesterday update (14/10/2011)! It works with my SD card month ago, but now it dosn't!!!
MacBook Pro 13 OS ver. 10.6.8

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug

Title
NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug or feature
Description
Problem Description:
NetStream.send can not send data to peerstreams when using with cirrus. Conflict with documents.
Sorry for tag the build as 11.0.1.3 while the bug is actually on 11.2 beta since the bug report system didn't have 11.2 beta yet.
If you are not responsible for 11.2 beta bug fix, please help a hand to handle this bug to 11.2 team.
This bug is "killing" to your application, so we really appreciate your help. Thanks.
==Publisher==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS);
ns.publish("sendtest");
...//after connection success.
ns.send("clientfunction", "ok"); // this line cannot reach subscribers. even if subscribers have client object correctly.
==Subscriber==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, cirrusid);
var client:Object = new Object();
client.clientfunction = clientfunction; // target function
ns.client = client;
ns.play("sendtest");
Steps to Reproduce:
1. compile the code in the attachment to SendTestExample.swf (not be able to paste it here)
2. run it under flash player 11.2.202.19 beta
3. run it under flash player 11
Actual Result:
HeartBeat is:
Start HeartBeat:
send hello
send hello
send hello
which means NetStream.send was not able to call "clientfunction" as expected.
Expected Result:
Start HeartBeat:
send hello
in client function: hello
send hello
in client function: hello
send hello
in client function: hello
which can call into the clientfunction as flash player 11 did.
Any Workarounds:
I can not find it out since it's an api level bug. But this can be very important for lots of applications which rely on send to do rpc.
Test Configuration
IE8, Firefox under Windows 7
Also have problem under Windows XP (but not well tested on this platform)
App Language(s)
ALL
OS Language(s)
ALL
Platform(s)
Windows 7
Browser(s)
Internet Explorer 8.0
==Attachment==
package {
    import flash.display.Sprite;
    import flash.events.Event;
    import flash.events.NetStatusEvent;
    import flash.events.TimerEvent;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    import flash.text.TextField;
    import flash.utils.Timer;
    import flash.utils.setTimeout;
    public class SendTestExample extends Sprite
        public static var statusArea:TextField;
        var ncServer:NetConnection = new NetConnection();
        var nsServer:NetStream;
        var ncClient:NetConnection = new NetConnection();
        var nsClient:NetStream;
        var timer:Timer = new Timer(1000);
        public function SendTestExample() {
            ncServer.addEventListener("netStatus", onNCStatusServer);
            ncServer.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
            statusArea = new TextField();
            status("status");
            statusArea.x = 0;
            statusArea.y = 0;
            statusArea.border = true;
            statusArea.width = 200;
            statusArea.height = 350;
            addChild(statusArea);
        function onNCStatusServer(event:NetStatusEvent):void {
            status("Step 1:");
            status("server: " + event.info.code);
            status("id: " + ncServer.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsServer = new NetStream(ncServer, NetStream.DIRECT_CONNECTIONS);
                    nsServer.addEventListener(NetStatusEvent.NET_STATUS, onNSStatusServer);
                    nsServer.publish("sendtest");
                    ncServer.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusServer);
                    ncClient.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
                    ncClient.addEventListener("netStatus", onNCStatusClient);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        function onNCStatusClient(event:NetStatusEvent):void {
            status("Step 2:");
            status("client: " + event.info.code);
            status("id: " + ncClient.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsClient = new NetStream(ncClient, ncServer.nearID);
                    var c:Object = new Object();
                    c["clientfunction"] = clientfunction;
                    nsClient.client = c;
                    nsClient.play("sendtest");
                    ncClient.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusClient);
                    //setTimeout(sendHello, 5000);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        protected function onNSStatusServer(event:NetStatusEvent):void {
            status("nsserver: " + event.info.code);
            if (event.info.code == "NetStream.Play.Start") {
                status("Start HeartBeat:");
                this.timer.addEventListener(TimerEvent.TIMER, function (e:Event):void {
                    sendHello();
                this.timer.start();
        protected function sendHello():void {
            status("send hello");
            nsServer.send("clientfunction", "hello");
        protected function status(msg:String):void
            statusArea.appendText(msg + "\n");
            trace("ScriptDebug: " + msg);
        protected function clientfunction(event:Object):void {
            status("in client function: " + event);

Thanks for reporting. I can reproduce the bug in house. We will investigate.
Calise

IMessage does not work after upgrade to iOS 8.1.3 to my iPad 4

iMessage does not work after upgrade to iOS 8.1.3 on my iPad 4

I Fixed it by trying to sign in with a different ID and canceling when it asked For a password and then signed in with my ID and it works! No more error message. I got this idea from another discussion. Thank you for replying though.

Touch ID not working after IOS 7.1 update

Touch ID will not work after the recent update, rebooted iphone to no avail. I then deleted all finger prints, but iphone will not recognise new fingerprints ..... Annoyed is not the word ! Any ideas ?

I'm like, Touch ID almost dead, we're going apple fixex this.
Seems it only is affecting the white model

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

AIR SDK 17 (BETA) is not working with Flash CS6

Hi,
The latest AIR SDK 17 is not working with Flash CS6.
I tried to publish and install an iOS app to my connected device via USB but I always get an error "Check if iTunes is installed".
The latest stable AIR SDK 16 is working fine, and yes, iTunes is installed on my PC.
DETAILS:
- Flash CS6
- AIR SDK 17
- System: Windows 8,1
- iPodTouch with iOS 8.1
REPRODUCE:
Open new AIR iOS template and publish/install it to a USB connected iOS 8.1 device.
Anyone else got that error?

I was getting this intermittently. Not a super problem. A remove and install in iTunes gets it loaded (after you tell ITunes where it is).

Re: NB200-134 - FN key not working after upgrade to Windows 7 Ultimate

My FN keys of NB200-134 is not working after upgrading from Windows 7 starter to Windows 7 ultimate. I tried installing every drivers found on Toshiba website for my lappy but still it does not work.
Help please

Hi asalamk,
The FN keys are controlled by Value Added Package and Flash Cards Support Utility. I think you have forgotten to install these tools
You should check the Toshiba page again and download both tools. Start with installation of Value Added Package then restart your notebook. After this install Flash Cards Support Utility. Once again restart and all FN keys should work properly now.

PRIMARY IDE not working after flash

Similar Messages

Maybe you are looking for