IDoc Monitoring: Data collection not getting completed

Hi,
I have setup IDoc monitoring in Solution Manager 7.1 SP08 for managed systems which is on ST-A/PI 01Q. There are many IDoc being generated in the managed system but I am not getting any alert for it.
In the alert inbox I get the message that the data collection has not yet taken place since the last activation. and the last data collection time is shown as of 2009.
Also in the managed system the BPMon background job BPM_DATA_COLLECTION_2 get cancelled with run time error TSV_TNEW_BLOCKS_NO_ROLL_MEMMORY
What can be the issue?
Regards
Vishal

Hi Vishal,
Please check and implement below notes to fix the first issue:
1570282 - Advance Corr. BPMon ST-A/PI 01N
1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
EBO)
1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
(framework)
Thanks
Vikram

Similar Messages

Complete data is not getting downloaded in XL

We have developed one Z report to take the status of open purchase order for projects. While downloading it to XL (ofiice 2007 installed on PC), complete data is not getting downloaded.
I would like to know whether it is XL problem or it is some bug in the report itself.
Pl. help.

While downloading the data to excel , try the following option
List -- > Export -- > Spreadsheet -- > Excel(in MHTML Format).
The download will authormatically open in excel window. Save it as excel file

Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Could not automatically scale X because monitoring data was not found

I have never been able to get Auto-Scaling by CPU to work. I have created new cloud services, waited days before setting it up, but this warning always gets generated when it tries to scale:
Could not automatically scale XXX because monitoring data was not found
The cpu data displays on the monitoring tab and the auto scale configuration screen.

Hi wikek,
Thanks for your posting!
Is your question similar with this post(http://stackoverflow.com/q/19730570 )? I am not sure but it is possible that the cloud service and VM has had maintainence on yesterday, please see this comment form
Azure dashboard (http://azure.microsoft.com/en-us/status/#history ):
Starting at 2nd Sep, 22:18 PM UTC to 3rd Sep, 03:45 AM UTC, a very limited subset of customers using Cloud Services and Virtual Machines in West US may have experienced intermittent errors or timeouts when attempting to access services. The issue was
intermittent, and customers would likely have been successful when retrying a request. Engineers have validated that full service availability has been restored to our West US customers. This incident is now mitigated.
It could leverage the VM or Cloud service performances. And I suggest you can contact with azure support to resolve this issue.
http://www.windowsazure.com/en-us/support/contact/
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Leave Workflow not getting Completed

Hi,
I have a custom leave workflow which is a copy of the standard one. I added two more levels for the workflow and that's the change that I made to this. Now the issue which I am facing is that even after the Final approver approves, the leave, the workflow is not getting completed . The workitem is getting completed and the data is saved in the infotype. What could be the reason for workflow still in Started status? Please do help.
Regards,
Jubish

Hi AK,
But, what is the terminating event for Leave? Could you please tell that? The thing is that, if the terminating event is not working fine, then the same issue will be there in for standard leave workflow also right?
Regards,
Jubish

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

Data is not Getting refresh in Dashboard

Hi I have implemented Xcelsius on the top of SAP BI System.
I have the following architecture -
SAP BI Cube --> BO XI 3.1 Universe Based on Cube --> QWaaS on the Universe --> Xcelsius Dashboard on the QWaas.
When i created a dashboard and run it , it worked fine and showed me data , which is lying in Cube.
But When the Data get updated in Cube and i again refresh the Dashboard , It still showing me the old data , the Data is not getting refresh in Dashboard .
what could be the possible casue ?
Is QWaas always fetch the dat at run time ?
Thanks

QaaWS web service call needs to be invoked to get the data updates from the datasource. Xcelsius provides several options to command how frequently web services connections are calle/refreshed ('refresh on load', 'refresh every X seconds' or trigger cells...).
You should also keep in mind, that, since QaaWS hits datasource each time web service is called, this can bring some performance issues (web service calls WebI server to run corresponding query, which performs a refresh). In order to mitigate this, since XI 3.0, QaaWS features a cache mechanism, that is used to store data results from each query refresh (corresponding to a web service call), in order to serve it again with better efficiency, in case same request is performed during a specific time interval (which typically corresponds to dashboard interactions).
Cache sessions are sorted according to the user names and prompt values used, cache is emptied after a defauilt duration without any interaction (request from the same session).
Cache timeout duration is set for each QaaWS query, and can be tuned from QaaWS Designer when modifying/creating the query : go to Advanced... button on first step of query edition wizard, cache lifetime corresponds to timeout value (in seconds) displayed on Advanced parameter panel (default value being set to 60 seconds).
Cache lifetime may also be an explanation why you do not see data refreshed (if you are with QaaWS XI 3.0 or later).
Hope that helps,
David.

Data is not getting posted to R/3 from CRM

Hi to All,
When i am creating sales order in CRM data is not getting replicated to R/3. System is showing that B Doc is created , posted and validated. But here in CRM system outbound queue is generated but in R/3 there is no data in inbound queue.
Can anybody tell me the reason behind this?
Regards,
Anurag

Hi,
Could you please check the if the Site-R/3 in SMOEAC has the subscription All Business Transactions (MESG)? If not please create a subscription to the R/3 site.
If this doesn't work please update the post.
Hope this helps.
Thanks,
Karuna.

Data is not getting replicating to the destination db.

I has set up streams replication on 2 databases running Oracle 10.1.0.2 on windows.
Steps for setting up one-way replication between two ORACLE databases using streams at schema level followed by the metalink doc
I entered a few few records in the source db, and the data is not getting replication to the destination db. Could you please guide me as to how do i analyse this problem to reach to the solution
setps for configuration _ steps followed by metalink doc.
==================
Set up ARCHIVELOG mode.
Set up the Streams administrator.
Set initialization parameters.
Create a database link.
Set up source and destination queues.
Set up supplemental logging at the source database.
Configure the capture process at the source database.
Configure the propagation process.
Create the destination table.
Grant object privileges.
Set the instantiation system change number (SCN).
Configure the apply process at the destination database.
Start the capture and apply processes.
Section 2 : Create user and grant privileges on both Source and Target
2.1 Create Streams Administrator :
connect SYS/password as SYSDBA
create user STRMADMIN identified by STRMADMIN;
2.2 Grant the necessary privileges to the Streams Administrator :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
In 10g :
GRANT CONNECT, RESOURCE, AQ_ADMINISTRATOR_ROLE,DBA to STRMADMIN;
execute DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE('STRMADMIN');
2.3 Create streams queue :
connect STRMADMIN/STRMADMIN
BEGIN
DBMS_STREAMS_ADM.SET_UP_QUEUE(
queue_table => 'STREAMS_QUEUE_TABLE',
queue_name => 'STREAMS_QUEUE',
queue_user => 'STRMADMIN');
END;
Section 3 : Steps to be carried out at the Destination Database PLUTO
3.1 Add apply rules for the Schema at the destination database :
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'APPLY ',
streams_name => 'STRMADMIN_APPLY',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
3.2 Specify an 'APPLY USER' at the destination database:
This is the user who would apply all DML statements and DDL statements.
The user specified in the APPLY_USER parameter must have the necessary
privileges to perform DML and DDL changes on the apply objects.
BEGIN
DBMS_APPLY_ADM.ALTER_APPLY(
apply_name => 'STRMADMIN_APPLY',
apply_user => 'SCOTT');
END;
3.3 Start the Apply process :
DECLARE
v_started number;
BEGIN
SELECT decode(status, 'ENABLED', 1, 0) INTO v_started
FROM DBA_APPLY WHERE APPLY_NAME = 'STRMADMIN_APPLY';
if (v_started = 0) then
DBMS_APPLY_ADM.START_APPLY(apply_name => 'STRMADMIN_APPLY');
end if;
END;
Section 4 :Steps to be carried out at the Source Database REP2
4.1 Move LogMiner tables from SYSTEM tablespace:
By default, all LogMiner tables are created in the SYSTEM tablespace.
It is a good practice to create an alternate tablespace for the LogMiner
tables.
CREATE TABLESPACE LOGMNRTS DATAFILE 'logmnrts.dbf' SIZE 25M AUTOEXTEND ON
MAXSIZE UNLIMITED;
BEGIN
DBMS_LOGMNR_D.SET_TABLESPACE('LOGMNRTS');
END;
4.2 Turn on supplemental logging for DEPT and EMPLOYEES table :
connect SYS/password as SYSDBA
ALTER TABLE scott.dept ADD SUPPLEMENTAL LOG GROUP dept_pk(deptno) ALWAYS;
ALTER TABLE scott.EMPLOYEES ADD SUPPLEMENTAL LOG GROUP dep_pk(empno) ALWAYS;
Note: If the number of tables are more the supplemental logging can be
set at database level .
4.3 Create a database link to the destination database :
connect STRMADMIN/STRMADMIN
CREATE DATABASE LINK PLUTO connect to
STRMADMIN identified by STRMADMIN using 'PLUTO';
Test the database link to be working properly by querying against the
destination database.
Eg : select * from global_name@PLUTO;
4.4 Add capture rules for the schema SCOTT at the source database:
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_RULES(
schema_name => 'SCOTT',
streams_type => 'CAPTURE',
streams_name => 'STREAM_CAPTURE',
queue_name => 'STRMADMIN.STREAMS_QUEUE',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
4.5 Add propagation rules for the schema SCOTT at the source database.
This step will also create a propagation job to the destination database.
BEGIN
DBMS_STREAMS_ADM.ADD_SCHEMA_PROPAGATION_RULES(
schema_name => 'SCOTT',
streams_name => 'STREAM_PROPAGATE',
source_queue_name => 'STRMADMIN.STREAMS_QUEUE',
destination_queue_name => 'STRMADMIN.STREAMS_QUEUE@PLUTO',
include_dml => true,
include_ddl => true,
source_database => 'REP2');
END;
Section 5 : Export, import and instantiation of tables from
Source to Destination Database
5.1 If the objects are not present in the destination database, perform
an export of the objects from the source database and import them
into the destination database
Export from the Source Database:
Specify the OBJECT_CONSISTENT=Y clause on the export command.
By doing this, an export is performed that is consistent for each
individual object at a particular system change number (SCN).
exp USERID=SYSTEM/manager@rep2 OWNER=SCOTT FILE=scott.dmp
LOG=exportTables.log OBJECT_CONSISTENT=Y STATISTICS = NONE
Import into the Destination Database:
Specify STREAMS_INSTANTIATION=Y clause in the import command.
By doing this, the streams metadata is updated with the appropriate
information in the destination database corresponding to the SCN that
is recorded in the export file.
imp USERID=SYSTEM@pluto FULL=Y CONSTRAINTS=Y FILE=scott.dmp IGNORE=Y
COMMIT=Y LOG=importTables.log STREAMS_INSTANTIATION=Y
5.2 If the objects are already present in the desination database, there
are two ways of instanitating the objects at the destination site.
1. By means of Metadata-only export/import :
Specify ROWS=N during Export
Specify IGNORE=Y during Import along with above import parameters.
2. By Manaually instantiating the objects
Get the Instantiation SCN at the source database:
connect STRMADMIN/STRMADMIN@source
set serveroutput on
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_OUTPUT.PUT_LINE ('Instantiation SCN is: ' || iscn);
END;
Instantiate the objects at the destination database with
this SCN value. The SET_TABLE_INSTANTIATION_SCN procedure
controls which LCRs for a table are to be applied by the
apply process. If the commit SCN of an LCR from the source
database is less than or equal to this instantiation SCN,
then the apply process discards the LCR. Else, the apply
process applies the LCR.
connect STRMADMIN/STRMADMIN@destination
BEGIN
DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN(
SOURCE_SCHEMA_NAME => 'SCOTT',
source_database_name => 'REP2',
instantiation_scn => &iscn );
END;
Enter value for iscn:
<Provide the value of SCN that you got from the source database>
Note:In 9i, you must instantiate each table individually.
In 10g recursive=true parameter of DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN
is used for instantiation...
Section 6 : Start the Capture process
begin
DBMS_CAPTURE_ADM.START_CAPTURE(capture_name => 'STREAM_CAPTURE');
end;
/

same problem, data not replicated.
its captured,propagated from source,but not applied.
also no apply errors in DBA_APPLY_ERROR. Looks like the problem is that LCRs propagated from source db do not reach target queue.can i get any help on this?
queried results are as under:
1.at source(capture process)
Capture Session Total
Process Session Serial Redo Entries LCRs
Number ID Number State Scanned Enqueued
CP01 16 7 CAPTURING CHANGES 1010143 72
2. data propagated from source
Total Time Executing
in Seconds Total Events Propagated Total Bytes Propagated
7 13 6731
3. Apply at target(nothing is applied)
Coordinator Session Total Total Total
Process Session Serial Trans Trans Apply
Name ID Number State Received Applied Errors
A001 154 33 APPLYING 0 0 0
4. At target:(nothing in buffer)
Total Captured LCRs
Queue Owner Queue Name LCRs in Memory Spilled LCRs in Buffered Queue
STRMADMIN STREAMS_QUEUE 0 0 0

Data is not getting posted in ABAP Proxy.

Hi,
I am working on File to ABAPProxy scenario. The data is not going to proxy.
In PI sxmb_moni is status is successfull and in the R3 sxmb_moni the status is successfull. But the data is not getting posted in the tables(ABAPProxy). I had checked the inbound and oubound queues. And with the same input data, abapers cheked their code in Abapproxy, then the table is getting updated. When we trigger from PI, the tables are not getting updated.Please help me.
Thanks,
Pragathi.

Hi,
The problem may be
Case 1: Cache is not getting refreshed(Check SXI_CACHE)
Case 2: The Queue Is blocked (Check SMQ1 & SMQ2)
Regards,
Sainath

Table PA0045 is getting updated but data is not getting displayed in Infty

Hi,
When i save entries for any employee in Infty 0045 , the table pa0045 is getting updated with the record.
But FOR FEW USERS, who created the record, the data is not getting displayed in one tab of the tabstrip bur rest tabs are filled with data. Its the case with few users only .
Regards,
Jyoti

Check if there is proper data to be shown in the tabstrip.
EX.. Loan Amount Granted in the Tabstrip Basicdata ...

Data is not getting loaded in the Cube

Hi Experts,
I had a cube to which I created aggregates and then I deleted the data of the cube and made some changes in it and trying to load the data again from PSA.
But I'm the data is not getting loaded in to it the cube.
Can anyone tell me do I have to delete the aggregates before I start a fresh data in to my cube. If yes can you tell me how do i delete it and load it again.
If it is something else please help me resolve my issue.
Thanks

Hi,
Deactivate the aggregates and then load the data from PSA to Cube.
And then reactivate the aggregates. While reactivating them you can ask to fill them also.
Regards,
Anil Kumar Sharma. P

Reg : data is not getting in the output

hi team,
             data is not getting in the output, but it is getting in the debug mode
REPORT ZSAPP10 .
*tables : pernr.
TABLES : PA0001.
type-pools : slis.
types : begin of itab,
        pernr type pernr,
        orgeh type orgeh,
        abkrs type abkrs,
        end of itab,
        begin of itab2,
        pernr type pernr,
        vorna type pad_vorna,
        nachn type pad_nachn,
        end of itab2.
parameter : p_pernr like pa0001-pernr.
*DATA: g_cprog tYPE SY-CPROG.
data : i_itab1 type table of itab initial size 0,
       i_itab2 type table of itab2 initial size 0.
data : w_itab type itab,
       w_itab2 type itab2.
data : t_fieldcat type slis_t_fieldcat_alv,
        w_fieldcat type slis_fieldcat_alv.
data : t_event type slis_t_event,
        w_event type slis_alv_event.
data : t_listheader type slis_t_listheader,
       w_listheader type slis_listheader.
*get pernr.
w_event-form = 'TOP_OF_PAGE'.
w_event-form = 'sub1'.
append w_event to t_event.
w_listheader-typ = 'H'.
w_listheader-info = 'this is new top of page'.
append w_listheader to t_listheader.
select pernr
       orgeh
       abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
w_fieldcat-col_pos = 1.
w_fieldcat-seltext_m = 'personnal no'.
w_fieldcat-fieldname = 'pernr'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 2.
w_fieldcat-seltext_m = 'org. unit'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'orgeh'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 3.
w_fieldcat-seltext_m = 'payroll area'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'abkrs'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
*g_cprog = SY-CPROG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
           I_INTERFACE_CHECK                 = ' '
           I_BYPASSING_BUFFER                =
           I_BUFFER_ACTIVE                   = ' '
             I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_PF_STATUS_SET          = ' '
           I_CALLBACK_USER_COMMAND           = ' '
           I_CALLBACK_TOP_OF_PAGE            = ' '
           I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
           I_CALLBACK_HTML_END_OF_LIST       = ' '
           I_STRUCTURE_NAME                  =
           I_BACKGROUND_ID                   = ' '
           I_GRID_TITLE                      =
           I_GRID_SETTINGS                   =
           IS_LAYOUT                         =
             IT_FIELDCAT                       = T_FIELDCAT
           IT_EXCLUDING                      =
           IT_SPECIAL_GROUPS                 =
           IT_SORT                           =
           IT_FILTER                         =
           IS_SEL_HIDE                       =
           I_DEFAULT                         = 'X'
           I_SAVE                            = ' '
           IS_VARIANT                        =
             IT_EVENTS                         = T_EVENT
           IT_EVENT_EXIT                     =
           IS_PRINT                          =
           IS_REPREP_ID                      =
           I_SCREEN_START_COLUMN             = 0
           I_SCREEN_START_LINE               = 0
           I_SCREEN_END_COLUMN               = 0
           I_SCREEN_END_LINE                 = 0
           IT_ALV_GRAPHICS                   =
           IT_ADD_FIELDCAT                   =
           IT_HYPERLINK                      =
           I_HTML_HEIGHT_TOP                 =
           I_HTML_HEIGHT_END                 =
           IT_EXCEPT_QINFO                   =
         IMPORTING
           E_EXIT_CAUSED_BY_CALLER           =
           ES_EXIT_CAUSED_BY_USER            =
             TABLES
             T_OUTTAB                          = I_ITAB1[]
          EXCEPTIONS
            PROGRAM_ERROR                     = 1
            OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
      FORM sub1                                                     *
FORM sub1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = t_listheader
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                                                    " sub1

write this way...
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
        i_callback_program                = w_repid
        is_layout                = wa_layout
        i_callback_user_command = 'USER_COMMAND_ACCT'
        i_grid_title             = 'Document Status Report'
         it_fieldcat                       = it_fcat[]
     IT_SORT                        = IT_SORT[]
         it_events                = it_events
         TABLES
           t_outtab                        = it_final_data[]
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2.

Workflow Not getting Completed

Dear All ,
It is very urgent problem . I have one workflow based on FIPP . I have moved that from development to production . In development it is working very fine . BUt in production my last task is not getting completed .
The scenario is the parked document will go through the approval process and last person will post the document . The document is getting posted But once the document is getting posted the table field WT_STAT of table WITH_ITEM should get changed that is not happening in production . It is working very fine in development . What should be the reason . Please let me know if any thing has to be done .

Hi,
This looks more like a customizing for me! The table WITH_ITEM is associated with the Witholding tax of the line items in the Invoice document. I am not sure whether the customizing are the same in both the systems.
On another hand are you using the standard workflow or a custom one? If you are using a custom one then I guess you can control this by having a terminating event "Posted" for this workitem.
Hope this helps,
Sudhi

IDoc Monitoring: Data collection not getting completed

Similar Messages

Maybe you are looking for