IDoc to IDoc scenario: distribute the model view

Hi!
I try currently to  configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
ERP:100 (Sender)
ERP:200 (Receiver)
and XIB:100 (XI system)
I successfuly created  a message type and generated the model view in tcode BD64.
Question:
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
When  I choose the receiver system ERP:200 and get the following error
Target system: ERP:200
Model view ECCCLNT100 has not been updated
Reason: Distribution model is currently being processed
When I try to choose my XI system I get the following error:
Target system: XIB:100
RFC destination for synchronous communication (message type SYNCH)
Partner profile LS PIBCLNT100 SYNCH does not exist
Generate partner profile
or specify outbound partner profiles for message type SYNCH
Is that an error? If yes, how can I fix them?
Thank you very much
Thom

Hi
Look my reply on this thread regarding SYNC Message Type.
Re: problem while distribute model view
When I try to distribute the model view which system should I choose?
a) XI System or
b) Receiver system ERP:200
You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI.

Similar Messages

  • Error in Distributing the model view

    Hi,
    I have clients 600, 610 & logical systems (ls_600, ls_610) in the same system.
    I am trying to set up the ALE customizing and distribute the model view.
    I have created RFC from 600 to 610 and the test connection is fine.
    I have created a model view in which i have given sender system as LS_600 and
    receiver system as LS_610 and the message type as MATMAS.
    In the partner profile(WE20) of LS_610(client 600), in the outbound parameter SYNCH
    i have given a port which uses the RFC to 610.
    When i have tried to distribute the model view it is giving error as
    'communication error occured.  Username or password is not correct (Repeat Registration).'
    I am not able to figure out the error.
    There is also a partner profile as ls_600. Do i have to
    make any changes there ?
    Do i have to do something in the client 610 ?
    Your help is highly appreciated.
    Thanks,

    Hi Prasad,
    Please maintain the MATMAS & SYNCH Message type in the Outbound partner profiles of LS 610.
    Test distributing the MATMAS IDoc's using BD10 without even maintaining Distribution Model.
    And let me know if you are able to distribute the IDoc or not.
    If you get the error. Please let me know the error.
    Regards,
    Krishna

  • IDOC to IDCO scenario: Distribution of model view

    Hi!
    I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
    ERP:100 (Sender)
    ERP:200 (Receiver)
    and PIB:100 (XI system)
    I successfully created a message type u201CZCREMRu201D and generated the model view PIMODEL in tcode BD64.
    Sender: ERP:100
    Receiver: PIB:100
    I assigned 3 partner profiles ERPCLNT100, ERPCLNT200, PIBCLNT100 and assigned a message type SYNCH with IDOC type SYNCHRON as outbound parameter.
    Unfortunately when I try to distribute the model u201CZCREMRu201D and choose my XI system I get the following error:
    Distribution of model view PIMODEL
    Target system PIBCLNT100      
    Model view PIMODEL has not been updated
    Reason: Distribution model is currently being processed
    Question:
    Do I miss some other inbound and outbound parameters?
    IF yes, which and on which systems?
    Thank you very much!
    regards
    Thom

    Hi Rob
    Y're right i made mistake when i was creating in SRM RFC destination puting host name of SRM system  not ERP.
    Thanx
    Marcin

  • Error in distributing the Model View in BD64

    Hi Experts,
    I have some problem in distributing model view in BD64. please see here the error details:
    Model view <logical client> has not been updated
    Reason: No authorization to create model view <logical client>
    .....authorization object B_ALE_MODL
    .....Parameter: activity 01, model view <logical client>
    i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
    Please help.
    Thank you,
    Tony

    Hi Experts,
    In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
    Edited by: Tony on Aug 3, 2011 4:30 AM

  • Related to  distribution the model view

    hi
    When we try to distribute the model view, we get an error 'Model View has not been updated. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
    What is being referred to as the maintenance system here? Are we missing out on something?

    Are you created distribution model for the correct Logical systems. Check it once.

  • Error - Distributing the Model using BD64

    Hi! All
    Not able to distribute the model from the Sender System.
    Error : Model view ZDMKANBAN has been changed
    While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
    but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
    when i try to transfer IDOC from Sender System to Receiver System could not do it.
    Hope so bz of error occurred in Distribution Model. Is it So
    kindly help me.

    you have to distribute the distribution model in its new version

  • Unable to distribute the MODEL to backend system in SRM 5.0

    Hello Experts,
    I have created distribution model " SRM_to_R3" in BD64, maintained message types BBPCO, BBPIV and MBGMCR
    Every time I try to Distribute this MODEL to back end system I get the following error in IDES system
    Target system T90CLNT090       Commnunication error occurred, error when opening an RFC connection
    RFC connections are
    T90CLNT090   - SRM to R3
    SRM_00_800   - R3 to SRM
    Systems got connected successfully and I can "Remote Logon" too......
    My query is why am not able to send or distribute the MODEL from SRM to ECC backend system ?
    How to get rid of the error and successfully distribute MODEL to backend system.........appreciate your help in this regard
    Rgds !
    SAP Novice

    Hi Zuljana,
    Kindly check if your partner profile is active. (Indicated by 'A')
    Sometimes if your partner profile is not active, you wont be able to distribute your model. Check the 'A' indicator
    Regards,
    Nikhil
    Edited by: Pbponikhil on Dec 21, 2010 4:11 PM

  • Error while distributing the model

    Hi
    I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
    Can anyone please suggest a way to overcome this error.
    thanks

    Hi,
    You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
    Preconditions:
    1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
    2) Do all configuration related to msg type, idoc type, etc in your partner system as well
    3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
    After you create the model and added msg type to it, you also need to do the following:
    1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
    2) To validate, you can check in your partner system if the model is automatically created there
    3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
    Hope it helps and solves your problem.
    Regards, Tapas
    <Pls award pts if useful or answered>

  • WhAT Is distributing the model

    Hi All
    Can anybdy plzz explain me what do we mean when we say we distribute the distr model in bd64?

    Hi
    The distribution model describes the ALE message flows between logical systems.
    <b>Use</b>
    You can specify the relationships between logical systems, message types, BAPIs and filters in the distribution model. Applications and the ALE layer use the model to determine receivers and to control the data distribution.
    <b>Structure</b>
    In the distribution model you can specify the messages to be sent to a given logical system. You can also define the conditions for the content and dispatch of messages in the filters.
    The distribution model consists of one or more views that you can define. With more complex distribution tasks you can assign business sub-areas or groups of logical systems to separate views.
    The relevant views of the distribution model must be available in all the logical systems involved in ALE. You can find the functions for distributing views in Customizing for ALE.
    Hope this helps.
    Regards
      Sumit Jain
    **Reward with poitns if useful

  • Using bind variables in the model view for master detail

    Hi all,
    I have a master-detail views setup on the following two queries.
    In the first query below - I use two bind variables to collect the start and end date.
    you have to add (and :startDate = :startDate and :endDate = :endDate) or you will get errors - bind not defined in sql
    I then use the viewQueryCriteria to collect the data on a search panel - so far so good. (Make the bind variables required) along with the other criteria.
    The bind variables are displayed in the search panel and the data is entered correctly.
    The query executes and all is happy.
    VIEWOBJECT1
    SELECT DepositAccounts.COA_ID,
    ... ChartOfAccounts.ACCOUNT_CODE || ' ' || ChartOfAccounts.ACCOUNT_TITLE as description
    FROM DEPOSIT_ACCOUNTS DepositAccounts, DEPOSIT_ACCOUNT_DETAILS DepositAccountDetails, CHART_OF_ACCOUNTS ChartOfAccounts
    WHERE DepositAccounts.ID = DepositAccountDetails.DEP_ACC_ID
    and ChartOfAccounts.id = DepositAccountDetails.COA_ID
    and :startDate = :startDate and :endDate = :endDate
    Now I add the summation of a value (AMOUNT) to the view object (java - create view impl) to the VOViewRowImpl
    and everything works - the value is shown in the transient attribute formatted and looking nice.
    VIEWOBJECT2
    SELECT PostingBatchAccounts.AMOUNT,
    FROM POSTING_BATCH_ACCOUNTS PostingBatchAccounts, POSTING_BATCHES PostingBatches
    where PostingBatchAccounts.PB_ID = PostingBatches.ID
    and PostingBatches.SOURCE_DATE between :startDate and :endDate
    Now I need to add the start date and end date to the child query - before the view executes (or the summation is calculated).
    The attributes are in the where clause (PostingBatches.SOURCE_DATE between :startDate and :endDate) in VIEWOBJECT2 which is the child.
    I need the child records and the summation to work with the date restrictions.
    I would assume you could get access to the child view in the VOViewImpl file and set the bind variables there.
    Everything I find is based on the JSF - not the model layer - this should be fairly easy (and common). can anyone give me a hand on this?

    Hi all,
    I have a master-detail views setup on the following two queries.
    In the first query below - I use two bind variables to collect the start and end date.
    you have to add (and :startDate = :startDate and :endDate = :endDate) or you will get errors - bind not defined in sql
    I then use the viewQueryCriteria to collect the data on a search panel - so far so good. (Make the bind variables required) along with the other criteria.
    The bind variables are displayed in the search panel and the data is entered correctly.
    The query executes and all is happy.
    VIEWOBJECT1
    SELECT DepositAccounts.COA_ID,
    ... ChartOfAccounts.ACCOUNT_CODE || ' ' || ChartOfAccounts.ACCOUNT_TITLE as description
    FROM DEPOSIT_ACCOUNTS DepositAccounts, DEPOSIT_ACCOUNT_DETAILS DepositAccountDetails, CHART_OF_ACCOUNTS ChartOfAccounts
    WHERE DepositAccounts.ID = DepositAccountDetails.DEP_ACC_ID
    and ChartOfAccounts.id = DepositAccountDetails.COA_ID
    and :startDate = :startDate and :endDate = :endDate
    Now I add the summation of a value (AMOUNT) to the view object (java - create view impl) to the VOViewRowImpl
    and everything works - the value is shown in the transient attribute formatted and looking nice.
    VIEWOBJECT2
    SELECT PostingBatchAccounts.AMOUNT,
    FROM POSTING_BATCH_ACCOUNTS PostingBatchAccounts, POSTING_BATCHES PostingBatches
    where PostingBatchAccounts.PB_ID = PostingBatches.ID
    and PostingBatches.SOURCE_DATE between :startDate and :endDate
    Now I need to add the start date and end date to the child query - before the view executes (or the summation is calculated).
    The attributes are in the where clause (PostingBatches.SOURCE_DATE between :startDate and :endDate) in VIEWOBJECT2 which is the child.
    I need the child records and the summation to work with the date restrictions.
    I would assume you could get access to the child view in the VOViewImpl file and set the bind variables there.
    Everything I find is based on the JSF - not the model layer - this should be fairly easy (and common). can anyone give me a hand on this?

  • Not able to distribute the model

    Hi
    I created a model using BD64 according to the procedure to the best of my knowledge. But i am getting the following error
    "Model view has not been updated. Reason: the distribution model is currntly being processed."
    Nobody else are logged in. Can anybody say what the prob might be and how can that be solved

    hi
    check this link
    [Re: getting problem while creating the dist model in bd64|Re: getting problem while creating the dist model in bd64]
    Thanks& Regards
    Nagesh.Paruchuri

  • Prob in distributing the model

    Hi
    Being done with the initial steps, I created the distribution model
    When i distribute that , i get the error stating "Communication error , function xxxxxxxxxx is not available".
    Due to what reson this error could be? Kindly elaborate .
    Thanks

    Hi,
    1.Check in the SM59.That error due to the RFC destination is not correctly assigned.
    2.Check both sides in outbound and inbound.
    Regards,
    Kumar(Reward if helpful).

  • How to add the model view controller in webcenter portal framework application

    i create a webcenter portal framework application.how to create a model class in my application..please help me.

    What you mean by this. You mean having model layer in webcenter portal framework application? Whats the exact requirement.? You want to create ADF BC in portal app.
    If you want to use adf taskflow application , i will recommend you to make separate adf application and use as shared lib in portal.

  • IDOC Model View Generation Issue

    Hi all,
    I am working on IDOCS and I am facing the follwing error when I try to distribute the Model View in IDOC--
    "the following ALE connection already exists in model view HR_TO_PI"
    I had deleted the above "HR_TO_PI" model view and I created a new one with new name.
    But I still get the same message.
    I don't think this is an issue with configuration.
    I am assuming it's an issue with table entries. Does this-"HR_TO_PI" value get stored in any table in the back end ?
    Kindly help. I had a look at SDN and other places but they all ask to check for partner profiles and logical systems which I believe I have configured right.
    Warm regards,
    Hari Kiran
    Edited by: HARI KIRAN REDDY on Feb 23, 2012 11:24 AM

    Hi Sravan,
    I had a look at TBD00. It shows all my current distribution models but not the one mentioned in the error.
    I had a look at some other tables in the TBD series but of no help.
    I don't know in which table  that entry has ended up.
    It's frustrating.
    Thanks for the input once again.
    Warmr egards,
    Hari Kiran

  • ALE error in distributing model view

    Hi all,
    I have one client & two logical systems ,ihave generated the partner profile successfully , but when i try to distribute the model view i get the error message :
    Model view is not been updated.
    Reason:distribution model is currently being processed.
    Any help in this regard would be appreciated.
    reagrds.

    Hi Annie...
        You can go through these links to get a better idea about ALE Configuration.
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    ALE/ IDOC/ XML
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
    http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
    IDOC Convertion
    /people/kevin.wilson2/blog/2005/12/07/changing-fields-in-an-idoc-segment
    Thanks and Regards
    Ashok Kumar.N

Maybe you are looking for

  • Output Format..Urgent help thanks

    //package test.example1; // Imports import java.util.*; import java.text.*; import java.util.Collection; import java.util.Vector; import test.shapes.Shape; import test.shapes.CalculationException; import test.shapes.round.Circle; import test.shapes.n

  • Org.xml.sax.SAXParseException: Content is not allowed in prolog Error

    Hello, this is pratap.<br> i was trying rules using decision tables with 'call charges' example<br>. after filling the text fields i am getting an error org.xml.sax.SAXParseException: Content is not allowed in prolog<br>. Can any one please tell me w

  • How to invoke system editor by double click a file(windows)?

    how to invoke system editor by double click a file(windows)? Just like that, double click a file named a.doc, windows will open it by word.exe.

  • System tried to change local host name

    A screen message with an exclamation mark showed up on my Mac Mini screen this morning which says:  This computer's local hostname . . . is already in use on the network. The name has been changed to . . . (then inserted the current host name (# 2).

  • IBook G3 from eBay.....DVD player???

    Hello all, I got my girlfriend a 2003 iBook G3 dual USB from eBay and it's in nice condition and clean installed however it doesn't read dvds nor does it have Apple DVD player. I tried putting the DVD player on but it didn't open. On the ebay site it