Idoc to X12 file seeburger error

I get the below error at the receiver file adpter,tested the mapping internally and it works fine.Can you help me please.D_165 is mapped to a constant 'U'.
SEEBURGER BICXIADAPTER --- CONVERSION ERROR ---InhouseDocReader doSyntaxCheck(): offset[281]: the found segment D_I65 is not in the message description. DESCRIPTION: InhouseDocReader Error: The Segment D_I65 is missing in the message description. Check your file.
Thanks

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

Similar Messages

Seeburger IDOC-to-File scenario: Error using Classifier module

Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier classifier
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
classifier attID classifierAtt
classifier destSourceMsg MainDocument
classifier showInAuditLog true
bic classifierAttID classifierAtt
bic destEncoding UTF8
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic mappingName AUTO
bic newLine true
bic srcEncoding UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne

Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
 <D_I01>00</D_I01>
 <D_I02/>
 <D_I03>00</D_I03>
 <D_I04/>
 <D_I05>ZZ</D_I05>
 <D_I06>CELORGS01</D_I06>
 <D_I05_2>ZZ</D_I05_2>
 <D_I07>AVX</D_I07>
 <D_I08>032008</D_I08>
 <D_I09>1718</D_I09>
 <D_I10>X</D_I10>
 <D_I11>00401</D_I11>
 <D_I12>000000008</D_I12>
 <D_I13>0</D_I13>
 <D_I14>T</D_I14>
 <D_I15>^</D_I15>
 <S_GS>
 <D_479>PO</D_479>
 <D_142>CLS01</D_142>
 <D_124>058895921</D_124>
 <D_373>20080320</D_373>
 <D_337>1718</D_337>
 <D_28>8</D_28>
 <D_455>X</D_455>
 <D_480>004010</D_480>
 <S_ST>
 <D_143>850</D_143>
 <D_329>800001</D_329>
 <S_BEG>
 <D_353>00</D_353>
 <D_92>SA</D_92>
 <D_324>4500005037</D_324>
 <D_373>20051110</D_373>
 </S_BEG>
 <S_CUR>
 <D_98>BY</D_98>
 <D_100>USD</D_100>
 </S_CUR>
 <S_FOB>
 <D_146>CC</D_146>
 <D_309>OR</D_309>
 <D_352>FREE CARRIER</D_352>
 <D_334>02</D_334>
 <D_335>FOB</D_335>
 <D_309_2>DE</D_309_2>
 </S_FOB>
 <S_ITD>
 <D_336>01</D_336>
 <D_333>3</D_333>
 <D_351>45</D_351>
 </S_ITD>
 <G_SN9>
 <S_N9>
 <D_128>L1</D_128>
 <D_369>GEN</D_369>
 <S_MSG>
 <D_933>TEST</D_933>
 </S_MSG>
 <S_MSG>
 <D_933>MESSAGE</D_933>
 </S_MSG>
 </S_N9>
 </G_SN9>
 <G_SN1>
 <S_N1>
 <D_98>BY</D_98>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 <S_PER>
 <D_366>BD</D_366>
 <D_93>Graham Crawford</D_93>
 </S_PER>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>BT</D_98>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>SE</D_98>
 <D_93>3M COMPANY</D_93>
 <D_66>92</D_66>
 <D_67>0000019591</D_67>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>ST</D_98>
 <D_93>SAMPLE</D_93>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 </S_N1>
 </G_SN1>
 <G_SPO1>
 <S_PO1>
 <D_350>00010</D_350>
 <D_330>10.000</D_330>
 <D_355>EA</D_355>
 <D_212>10</D_212>
 <D_639>PE</D_639>
 <D_235>BP</D_235>
 <D_234>230-1812-01JDS</D_234>
 <D_235_2>EC</D_235_2>
 <D_234_2>A00000000000002</D_234_2>
 <G_SPID>
 <S_PID>
 <D_349>F</D_349>
 <D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
 </S_PID>
 </G_SPID>
 <S_REF>
 <D_128>CO</D_128>
 <D_127>4500005037-00010</D_127>
 </S_REF>
 <G_SSCH>
 <S_SCH>
 <D_380>10.000</D_380>
 <D_355>EA</D_355>
 <D_374>002</D_374>
 <D_373>20051208</D_373>
 </S_SCH>
 </G_SSCH>
 </S_PO1>
 </G_SPO1>
 <G_SCTT>
 <S_CTT>
 <D_354>1</D_354>
 </S_CTT>
 </G_SCTT>
 <S_SE>
 <D_96/>
 <D_329>800001</D_329>
 </S_SE>
 </S_ST>
 <S_GE>
 <D_97>1</D_97>
 <D_28>8</D_28>
 </S_GE>
 </S_GS>
 <S_IEA>
 <D_I16>1</D_I16>
 <D_I12>000000008</D_I12>
 </S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne

Archiving Error X12 files

Hi,
My scenario has the input X12 files mapped to orders idocs. We are using Seeburger conversion modules in the File Adapter to transform the X12 files. When there is any error in the conversion of the X12 file, it throws an exception. Is there any way to archive this file into an 'Errors' folder, so that the adapter can continue processing the rest of the files? Currently, the processing is stuck till the faulty file is manually removed from the folder. Any help in this regard, is greatly appreciated.
Thanks,
Geetha

Hi Geetha,
Check the sender file adapter(seeburger)..processing mode:
select archieve fualty source file, mention the path where it has to put the files.
You can later on check the folder and process the error files.
Alternatively,
Adapter module can be created if any attachment has to be retained.
Regards,
Sushama

IDOC-XI-FILE Scenario: Error in ABAP Mapping

Dear All,
I am working on IDOC-XI-Flat FIle scenario in which I am using ABAP Mapping as per document "How To Convert an IDoc-XML
structure to a flat file and vice versa in XI 3.0".
I created one customized Idoc for this. The Idoc is reacing XI but its flat file is not getting created. Its giving me following error:
<SAP:Stack>Error in mapping program Z_ABAP_MAPPING_PACKING_LIST (type SAP-ABAP, kernel error ID UNCAUGHT_EXCEPTION) An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I have also gone thru threads posted for the same topic earlier but still I am not been to resolve this error.
Please help me out in resolving this error.
Regards,
N.Jain

HI,
 Log saying that, u have problem in the mapping program.
i.e Z_ABAP_MAPPING_PACKING_LIST
 the problem is due declaration of data.
 i hope that, you have some methods.
 those are declared under intialization section in mapping program.
please use start of selection before the method.
other wise, it will come under intilization section.
warm regards
mahesh.

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
 File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
 Sender:
 - RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reciever
 communication party = space
 communicatin component = ZTEST_COMP
 Configure Reciever:
 There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
 -RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reviever:
 ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

Error in IDOC(ALEAUD) to file Scenario

Hi ..
we have a client requirment were they want the ALEAUD acknowledgement in the form of file.
So we are creating a IDOC to file scenario, where IDOC is ALEAUD which is mapped to create a file in the traget system. but when we post the IDoc we get thwe following error.
*Note: have a small doubt. Can we use ALEAUD Idoc as a normal IDoc to File Scenario. because with the documents i understand that ALEAUD is a acknowledgment IDoc which is generated based on the request IDOC. but in our scenario we are manually using the structure of ALEAUD in the source system*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_NO_REQUEST</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>ALEAUDIT IDoc cannot find request IDoc in Integration Server</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Kindly help me out .
Thanks in advance
Deepika

Hello,
If you need to send the ALEADUIT back to the SAP system if the file returns a successful ack, then you will need to have a BPM with a separate SEND step to send back the ALEAUDIT.
And check this ......
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
*******Reward points if found useful

IDOC-BPM-FILE scenario ERRORS

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Hello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
 <pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
 <pns:name1>ajeet</pns:name1>
 <pns:name2>phadnis</pns:name2>
 </pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger

Hi All,
IDOC (Invoice) to EDI file scenario without Seeburger
Pls let me know if anybody have blogs for the same
EDI file to IDOC (Orders) scenario without Seeburger
Pls let me know if anybody have blogs for the same
Regards

Hi Rachit,
>>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
Also java code for IDoc to EDI have some problems:
1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
All the best
Regards
Suraj

IDOC TO FILE Segment Error

Hi,
I am doing IDOC->FILE. When I am posting to Idoc I am
gettng this error in R/3 - "Segment 'ZMESSAGE',
segmentnumber '000001' not correct in structure ZIDOC"
thx and regards,
Ansar.

Hi Ansar,
In your R/3 system from where IDoc is triggered check whether the idoc segment ZMESSAGE is released.
Pls do check whether the latest idoc metadata is existing in the IDX2. If not pls do delete it using IDX_RESET_METADATA report and try it.
Also do compare the structure you are using for the IDoc is similar to the one which is being used in the integration repository. If not pls do reimport it.
Cheers
JK

Use of "Archive Source Files with Errors" for BIC module error

Hi All,
I have Edi file to Idoc scenario , where i am using SEEBURGER BICXIADAPTER.MODULE.
My question is if the input file caught in error with BIC Module e.g
"MP: exception caught with cause Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment UNH found: 0 instead of 1 offset :80 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment UNH ([not specified]/[not specified])."
can we move these errornous files to another directory using Processing parameter "Archive Source Files with Errors" available with Sender File Adapter?
In File Adpater my Module tab looks like :
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
In my scenario , its not working.. do we have any other option to achive this?

Hi Jyoti,
I had a raised a similar case with SAP and came to know that archiving only works if the error raised by the module is so called "Permanent". However, bic doesn't raise permanent error due to which archiving of error files won't be possible. Seeburger haven't came up with a solution yet.
Regards,
Prateek

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

IDOC to XML file scenario with party

Hi All,
I am developing a IDOC to XML file scenario with party in which I have extended the MATMAS idoc and configured the receiver FILE communication channel.
But its giving me the error *"No receiver could be determined"* with party. If I run the same scenario without the sender party its working fine.
And sender is my R/3 system under party P_Party and receiver is my third party system under P_Party.
Thanks in advance.
Gaurang

U can give a try as follows.
In the Partner Profile of Sender R/3 system,
Give the Receiver Party P_Party in the PartnerNo. Give the 'Business Partner' as logical System type.
In XI, Party Definition of P_Party
Give the following Alternative Identifier
Agency -   Sender R/3 Business System
Scheme -   ALE#GP
Value    -    P_Party

IDOC to flat file and vice versa

Dear community,
we should send IDOCs to flat files and read plain files and map them to IDOCs.
Is there any comfortable way to do this without doing a huge content conversion for
IDOCs? Exist a SAP standard for such process?
We receive the IDOC as normal IDOC. Would it be more easy to save the IDOCs
directly as flat file on ERP file system??
System PI 7.11
IDOCS: WHSCON, WHSORD and WMMBXY
Regards
Chris
Edited by: Christian Riekenberg on Feb 1, 2012 2:41 PM

Hey folks!
We have a PI 7.31 SPS5 Java-only installation here and are using the module IDOCFlatToXmlConvertor. For single IDocs with one line for the EDC_DC40 header and the others for the IDoc payload the conversion works. But when we want to process multiple IDocs from the same type within one file, we see this error in the log:
Module Exception 'com.sap.aii.af.idoc.exception.IDOCModuleException: No data segments for DOCNUM = ' found, cause: <null>
Are there any requirements how the multiple IDocs have to be structured within the file?
Best regards
Heinrich
Update:
I found out that the module wants each record to contain the corresponding DOCNUM to find the matching records. The non-SAP sender system normally does not set this value. Is there a way to "convince" the module to convert the IDocs nevertheless?

File to idoc scenario with file size 16 MB

Hi experts
We are developing a file to idoc scenario.The file is a 16 mb CSV txt file.Is it feasible to poll a 16 mb file at a single shot or any mechanism can be followed which would split the 16 mb file into manageable size files so that it can be polled from the adapter engine side.Will there be any performance bottleneck fr polling 16 mb file .Plz provide help in this regard

Hi Sabyasachi,
There would be absolutely no problem , you need not worry. I myself am using a 16 MB master record file.
The problem only arises when you need to open this 16 MB file for into some errors or some other changes then invariably what happens is that my desktop hangs.
Regards
joel

Multiple Idocs to Multiple files

Hi,
I have a Idoc to File Scenario, where I get multiple Idocs and I need to generate multiple files with different file names
Assume I am using file XML port at SAP to collect the Idocs.
Target files are generated based on two field values (Delivery Type and Shipping Point)from Idoc.
Eg:
I have three Idocs at a time.
Idoc1 has Delivery Type = EL & Shipping Point = 2550 --> Target file name is test1.bpr
Idoc2 has Delivery Type = LF & Shipping Point = 2551 --> Target file name is test2.bps
Idoc3 has Delivery Type = NL & Shipping Point = 2552 --> Target file name is test3.bpr and test3.bps
1) Does Mult-mapping support in the case... ?
2) Do I need to change the Idoc Occurrence 0 to unbounded ?
3) What will be the Occurrences in the interface Mapping
4) Can i generate Multiple fileswith different names at one time as specified above using Dynamic Configuration?
5) What will be the Target Structure Occurrence ?
Thanks,
Varun

Hi,
Though I am using Multi - Mapping only 1 file is being created. I tested with two Idocs, where 2 files should be created.
In Moni, under Payload, I can see 2 sets of Main Document and SubMainDocument been created.
How to generate 2 files/multiple files ?
If Dynamic Configuration is not supported in case of Multi Mapping, If I want to use Variable Substitution, then What will be the Target path to be defined in the comm channel since Multi mapping is there. I am trying to define for Action field. Does Variable Substitution support Attributes in the aml payload ?
My target structure
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:Root xmlns:ns1="urn:ap:xi:dwn:Logi:100">
- <Shipment Company="XX" Warehouse="01" ErpOrder="0830001212">
<Action>0830001212_2551.bpr</Action>
<Customer Customer="DEMO" Company="DEMO" />
</Shipment>
</ns1:Root>
<?xml version="1.0" encoding="UTF-8" ?>
<root>
<Shipment>
<Action>0830001212_2551.bpr</Action>
</Shipment>
</root>
Shipment Occurrence is 0 to unbounded and above root I have Messages and message1 node (since Multi mapping)..
so How do I specify Path for variable substitution in this case, i tried all possibilities, but i am getting error as
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var2: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: var2
I am working on PI 7.0 SP 21
Thanks
Edited by: Varun Reddy on May 9, 2011 4:38 PM

Idoc to X12 file seeburger error

Similar Messages

Maybe you are looking for