Ie white flash blink solution

hi,
just wanted to share that i've managed to get the menu to
work well in firefox, safari and chrome but in ie6 and sometimes in
7 it was blinking a white flash when changing between the menu
items.
to solve it all i had to do is remove this line from my code:
<?xml version="1.0" ?>
even when it was commented it was still doing it. i also
tried it with a combination adding the UTF8 attribute into the tag
but only removing it helped.
cheers,
aaron.

I dont see anything flashing in IE7, FF, i only see the arrow
disapearing and showing on mouseover in IE6. or is this what u
mean?
Also im seeing your using /* SpryMenuBar.js - Revision: Spry
Preview Release 1.4 */ <-- 1.4
I suggest downloading version 1,6 and check if the problem is
still there.

Similar Messages

Black screen with white flashing line on startup

~computer info~
Mac OS X Version 10.6.7
2.66 GHz Intel Core 2 Duo
4GB 1067 MHz DDR3
24 in. Montior
Startup disk: Macintosh HD
~Partition info~
FAT32 Windows XP
~issue~
Hello; I've recently encountered a problem with bootcamp that I can't find a solution to... Every time I start up the computer in boot camp, all I get is that black screen with the white flashing line. It comes up, goes to a plain black screen, then quickly comes up again. It never stops, either. I've let it run, and it won't finish.
I've had the partition for MONTHS now, and nothing like this has happened. I've had it since I upgraded to Snow Leopard awhile back, and needed to re-partition the drive. I literally had been using it the day before it happened, and the only thing that happened was that I got that "Windows Security 2011" malware, but I got rid of it fully (As I've gotten it 3 times this month). The other two times I got it, it didn't do anything. I fixed it, and went on with life. But is it possible that it broke something in the partitions inner files this time?
I ran disk utility, and it said the partition was broken. After verifying it and confirming this, I did "Repair Drive", as it allowed me to. It finished with no errors and said it completed, so I tried to go back into the partition, but it gave me the same results.
To be honest, most of my stuff is on my External Harddrive, so re-doing the partition is only going to be time used to me. But I still DO have things on there, and it'd be a pain to transfer them back and forth between the Mac and Windows partitions... I'd really like to know if there's anyway to fix this, or if it's just going to fall back to me re-partitioning the drive...
Thanks for the help in advance.

That blinking line is a "cursor." It's only supposed to show for a second or two as your iMac switches to and then starts Windows. But as you indicate here, it's not getting past the cursor..
Disk Utility can repair FAT volumes, but it cannot correct issues caused by corrupted items which, if the volume was repaired, there may be some.
Since we are dealing with a Windows boot partition, it's entirely possible that the repairs inadvertently corrupted the data Windows needs to start and run. It's also posible that Mac OS, in fixing the Boot Camp volume, overwrote the existing boot record in the Windows partition with a generic, though non-bootable version.
Windows' own CHKDSK should have been used to make the repairs rather than the OS X Disk Utility, which would have avoided this worst-case scenario in data recovery. CHKDSK has a special version of itself on the Windows disc, which may be accesed by using the Windiws Recovery Consile upon pressing R during the "Welcome to Setup" screen.
Though it appears ftom my position here that you will need to reinstall XP, it may yet be possible to recover data that hasn't been copied to the external HDD. For this task, I'd like to recommend that you start up in Mac OS for the time being, and pull any new or changed items from the Boot Camp volume except for installed software; the latter are nearly impossible to transport with reasonable accuracy, and should instead be reinstalled.
Once you have what you need, format your Boot Camp volume and reinstall Windows, this time selecting NTFS as your filesystem. NTFS is the preferred option for Windows in general, thiaks to its innate file access controls as well as the ability to compress or encrypt data "on the fly." NTFS can be read by Mac OS X, but not written from it, thus NTFS volumes cannot be altered except by Windows itself.. But it is also a requirement if you plan to upgrade your unit using Windows 7 in future.
Nate

Flashing/blinking black once awhile on certain website.

Firefox is flashing/blinking black once awhile on my desktop PC. It only happen on certain websites (such as facebook or my personalized iGoogle). It doesn't happen with Chrome nor IE. Weirdly, it doesn't have the same problem on my laptop...
To me, it sounds like certain components are triggering this, but I have no idea what it is... Anyone have similar experience/solution?? Thanks.

Comparing the two systems again, I think I figured out what caused it: '''Kaspersky URL Advisor'''. If I disabled it, the blinking stops. If anyone has a solution other than that, please reply. Thanks.

Using embedded SWF, get a white flash when its to play

Hi,
We develop e-Learning content using swf files embedded in
DCRs. We have started noticing a problem with the new Shockwave
player 10.1+ in that there is a noticable flicker or white flash
before the swf plays or is told to move on.
Has anyone had a similar problem? Does anyone know a
solution?
We are using Director 8.5 and Flash 8.0. files published for
Flash Player 5.0.
Simon

Well dont all fall over each other trying to post a possible
solution ;-).
Seems that we found the problem. We use shared script
libraries (cst & cct). It appears that there is a line in our
lingo code that sets the flash sprite cast member automatically
direct to stage. Shockwave player 10.1 + does not seem to like this
on standard speed machines and causes a flickering border around
the flash animations, which is really noticable. The line of code
reads as so:
sprite(channelNo).directToStage = true
We simply commented this out and the page functions fine.
Incedently, if I manually set the flash cast member as direct to
stage, we get the same issue, only more exagerated. This must be a
bug in the 10.1+ player as we don't get the issue at all on
machines running the 8.5 player.
Simon

Safari white flash before loading a darker color page

Hi,
I wonder if this can be improved: my website's pages (in frames) have a grey background set and an additional grey image on top. In Netscape-Seamonkey, they load fine in grey color. In Safari however, there is an annoying white flash between two pages. Is there something that can be done about it? Thanks!
Paul

>So, when you load the pages directly ... no white flash
I maintain actually another website, built on the same frame set (www.schilliger.com). It has only about 30 pages and they are mostly accessed by links located on the left frame. Once the first page has loaded with a white flash, then further browsing is without this annoying effect. Why it persists on the photo website is a mystery...
>Or, you might decide that its not worth it, and not enough users will see this as to make it a priority issue (as it initially appears to be Safari-only).
It's been this way for years probably. I seldom use Safari so I did not notice until the other day. And it's quite possible that I already asked the same question a few years ago but did not find a solution... Not a big issue in any case.
Thanks to All for the brain storming around this question!
Paul

White flash after title clips

I am getting a white flash on the screen after every title in my movie. It only shows on the DVD after burning from iDVD. White flashes do not show on screen in imovie.
Message was edited by: Jay Deutsch

I've had problems like this, but it showed during the preview in iMovie. My "solution" was to delete and then redo the titles.
John

White flash between FLVs

Hello!
I am creating a virtual tour of an office with multiple video
segments. I want to let the user make choices after each segement.
I can choose the different flvs to play but I get a sudden white
flash as I start the next video. Any suggestions how to eliminate
that?
thanks,
rich!

That is far too simple a solution, if only it was true. (It would also suggest that my eyesight is not up too much)
I've had this problem repeatedly, and even overlapping the video clips by a considerable distance doesn't always yield a positive result.
http://www.aircontrolindustries.com/flash_problem.jpg
The two clips are one after another in the same layer, no space, and no, the video clips don't begin/end with a white frame.
*Important* When I let the movie play in Flash, there is no gap, it's only after exporting. And after exporting is a gap before the clip (even though it starts in frame 1) and between the clips, and it is showing what the background colour is set to.
J

White flash light on Nokia N95

do enyone know trick or app to have white flash light on for a few minutes?

Hi, assuming you want to use the flash as a torch, try this
http://www.symbian-freak.com/news/007/09/freeware_the_all_in_one_torch.htm
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

White flash frame at chapter start

Hello,
I have a Mac G5 with FCP HD 5.0.4. It came with iDVD 4.0.1. I wonder if you can help me with my problem.
When I create an iDVD project, I get a brief freeze, then a white flash frame at the start of every chapter (scene selection). Same for "play movie" (the automatic chapter 1).
I found advice online pertaining to the same problem with iMovie and iDVD - so I thought I would give it a shot with FCP. I export my FCP sequence (best quality QT movie) without chapter markers. Then I import the single file into a new FCP project, add chapter markers and export it again - to drop into my iDVD project. But no change. Still the white flash frames.
I have iMovie 4.0.1 - but it only does short movies. My project is about 60 minutes.
Do I need to upgrade to iLIfe, DVD Studio Pro, iMovie HD?
Thanks,
Mikado1

Hi Sue,
Thanks for this.
Two problems. First, I don't have iMovie HD - I have iMovie 4.0.1.
I tried your idea (with a short clip). I exported QT movie from FCP HD (best quality, no chapters) into iMovie. Then I exported the no chapter QT movie iMovie to desktop. Then I imported the QT movie to an iMovie new project, added chapters and created an iDVD project from iMovie.
Same problem. I never get to the burning stage. The "freeze then flash frame" problem at the beginning of all chapters is in the preview.
My iMovie 4.0.1 doesn't accept my 60m film (too long) - so I'll need another solution anyway.
I tried reinstalling iDVD 4.0.1 - but still the same problem.
At this point I'm willing to upgrade to something else. Sounds like I'm better off with iDVD vs DVD Studio Pro, given my current knowledge. I shouldn't need iMovie HD, if I have FCP HD already?
By the way, the QT movie export of my project plays fine with QT player.
Thanks so much,
Mikado1

White flash on projector load...

I'm sure everyone has figured out ways around this, but I
have not seen a definitive answer to solve this problem once and
for all.
This happens on both standard and shockwave projectors for
mac and pc. I have a swf in the project, but it isn't on channel 1
nor the first frame and it doesn't play until the user engages it.
I also have the a black splash screen and the stage itself is
black. The problem only occurs as the projector is loading.
Any help would be greatly appreciated. Thanks

Ok So. I tried making the article pdf, jpg, and png. No change. My folio is set to v26.
The best solution I've come up with is to not have a background image in the animation. If the animation has a transparent background and transparent poster, The background image has to be a static image placed in indesign. If the animation loads the same background on top of the poster then i get the white flash or the image will appear to have a color change.
So its work around that limits the use of animations.

White flash on page transitions

Hi guys
The title kind of says it all. Between any two page transitions on
www.andybertaut.com there's an ugly white flash that only seems to be appearing in IE11. (I checked IE8 and chrome). I googled it and found two possible solutions (a link to an unused js file, which I don't have, each of my js files are in use,
and the need for an IF statement to cover page transition smoothening for IE:
<meta http-equiv="Page-Enter" content="blendTrans(duration=0)" />
<meta http-equiv="Page-Exit" content="blendTrans(duration=0)" />)
Neither one worked. I went all through my css and can't find anything. Some of the pages are really simple, with only a small amount of html and css in them, so I'm not sure what could be awry in them.
Thanks

It would be hard to help you unless we can reproduce your results. I can't. I see nothing on IE11 that I don't see on another browser. There is no white flash between page transitions.

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

Flashing / Blinking screen on Qosmio F50

Hello,
I've a persistent problem with my F50-12L screen, suddenly the screen flashing/blinking/display brightness goes up and down suddenly (This is not dim, it happens when I'm working as well)
When I start up my laptop, everything is smooth and working fine, suddenly it start to blink/Display brightness goes up and down and blinking for seconds then it disappear and back to normal again! I'm using the latest drivers and latest 2.2 bios and OS is win7 ultimate 32bit.
I took it twice to the authorized dealer/support here in Egypt which called Toshiba El-Araby : http://toshiba.elarabygroup.com , every time they say nothing wrong with it !! I check it before leaving and everything is fine and I keep telling them it's happening all the time, it just doesn't happen in front of them(is it my fault? lol), and back to home, and test it, it may run for hours without blinking etc, but suddenly, it starts to do so again for a while and disappear, and so on...
I thought it's an issue with the adapter, It's happening also when I'm working on battery, and I tried to remove the battery and work on the adapter directly(to check if there is nothing wrong with the battery) and it happened again.
Also, I tried to change my power mode, I tried all of them: High perf, balanced & power save modes, It''s happening whatever mode I use.
* Sometimes when it happens, there is a sound hmm i dont know the source of the sound but it seems to be the fan!(not sure, weird low sound! it's like zzzzz) I tried to adjust the screen and the flashing/blinking disappears, but it doesnt help all times, is there any issue with the screen itself?
I got tired of this, and of this support agent here in Egypt as I can't drive for 2 hrs everyday for nothing usefull, and Its hard for me to leave the laptop for days every week when it happened.
Anybody faced such issues with screen being flashing/blinking like mine? Do you have ideas or suggestions regarding this? Does Toshiba provide direct email support? I coudn't find their technical support email, If so, I would appreciate providing me with it and any help is much appreciated.
Sincerely,

Macius ,
Thanks for your reply and sorry for the delay. I was unable to login to this forum and it kept saying no user name, however I've managed to login now after many tries of resetting password.
I've tried to connect it to an external monitor, not doing the same with external monitors(it doesn't blink/flash when I connect it to an external monitor) Also when it flash/blink I adjust it by my hand and it disappear and return again and so on and it's annoying.
Do you or anyone has an explanation to this please? Plus, When it flash/blink, there is a weird low sound comes along with it zzzzz
I'm planning to take it to the Toshiba agent here in Egypt on Next Sunday, But i will appreciate any inputs that can spot or clarify this issue as it may help me to explain it better to the tech support at Toshiba as they are running in a closed circle for over a year.

Oracle forms display bright white flash when transitioning between forms.

We recently migrated an application from Oracle Application Server to WebLogic and we are noticing that in the WebLogic environment while transitioning between forms there is a quick bright white flash that has caused several complaints. We are not sure if this is related to a performance issue which may be preventing the form from painting quick enough or if there is a configuration problem somewhere. Has anyone else seen this behavior?
We are running WebLogic Server Version 10.3, Fusion Middleware 11gR1, and Oracle DB 11.2

Unfortunately we don't have any errors to work off of. The application works fine, it's just that their is a very short delay when transitioning from one form to another and during that transition the whole form turns bright white which has caused users to complain that it could cause an epileptic seizure. I assumed maybe there was some performance tuning/caching that could be done to make it so it loaded quicker. Our DBA team recieved a response from Oracle support stating that although the forms themselves are relatively unchanged, due to the underlying software changes in 11g we are to expect some differences compared to previous versions. We have since set background in formsweb.cfg to use a light grey image which seems to be more acceptable for our users.
Edited by: user4597705 on Oct 12, 2012 1:18 PM

A beeping sound, along with a little white light blinking on/off on my MacBook Pro?

My MacBook Pro is making a loud beeping sound along with a little white light blinking on and off at the bottom of the keyboard. None of the keys are working so I do not have the ability to shut it down. Any idea how to stop the beeping sound?

Apple One to One is a paid service which has to be purchased when the computer is purchased.
http://www.apple.com/retail/learn/one-to-one/
Appointments at the Genius Bar however are free (evaluation, troubleshooting, etc) - repairs would have to be paid for if out of warranty.

Ie white flash blink solution

Similar Messages

Maybe you are looking for