If anyone could help me I would be HUGELY appreciative - Uni deadline today and need help!

Hi
I'm reasonably new to indesign but know the basics. I have a deadline today but my InDesign CS6 is behaving strangely - If anyone could help me I would be HUGELY appreciative.
I'm trying to type like I normally would but whenever I try to place a piece of punctuation at the end of a paragraph or line, it places it at the start of the line.. even if my cursor is telling it to do differently. (see image)
I'm trying to place it at the end of legibility where my cursor is but it places it at the start of clarity at the start of the line!? does anyone have any ideas, need help with this ASAP
Thanks a lot!
Joe

@Joel – do you work with the Adobe World-Ready-Composer in conjunction with a RTL (Right-To-Left) character format? Maybe you could show us your paragraph with "Hidden Characters"on. Together with your definitions of the character style for the dot, the character style for all other characters and the paragraph style.
I could mimic something like you are showing with a very strange set of scripts generating a paragraph style and two character styles in InDesign CS5.5.
See the following screen grabs:
Character Style named "ZF_LTR" for all characters in the paragraph but the last one (the dot):
Character Style named "ZF_Arabic" for the last character in the paragraph:
Paragraph Style named "AF_MIXED2_LTR-RTL" for the whole paragraph. Not formatted properly for Arabic use. See the details in the section "Formateinstellungen" in the screen grab:
That would be an explanation…
Might be, that there is another one.
Uwe

Similar Messages

Help. I had to re-install the OS system and need help.

I had to re-install everything for a problem I rather not get into but.....I had just published a site using iWeb. I forgot to get a copy of my "Site" folder and can no longer open my files that I have published on the Internet using iWeb. Is there a way that I can download it or do I have to make my pages all over again?
Thanks,
wapeppper

Wapepper,
Sorry to tell you but the answer is really no.
Your iWeb site is held in the domain file which lives here:
User / Library / Application Support / iWeb / domain.sites
You need to start your site from scratch if you dont have this file, you may be able to use copy /paste to pull some of the data back from your published site.
Note: If you give your new site the same name in Site Organizer in iWeb as the old site, it will delete the old site when you publish the new one.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.6) willg4pb.com - Updated 2nd May

Having trouble streaming Donkey Kong or Mame and need help!

I'm having trouble trying to stream my Mame program or Donkey Kong game on this program and not sure how to! I looked under streaming apps and this one came up! I have been having trouble trying to use the OBS project program and won't let me stream my Donkey Kong game that well! If I could get some help in how to do this! :-).

I'm using Windows 7 and I'm using Twitch to stream. I was told I can use Ustream but I'm not sure how to use that program for Donkey Kong streaming either.
Date: Thu, 8 Aug 2013 07:41:28 -0700
From: [email protected]
To: [email protected]
Subject: Having trouble streaming Donkey Kong or Mame and need help!
    Re: Having trouble streaming Donkey Kong or Mame and need help!
    created by C F McBlob in Installing Flash Player - View the full discussion
We need more info.
Is this Windows or Mac, or another OS?
Whast browser are you using to stream the videos?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5577471#5577471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5577471#5577471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5577471#5577471. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT1222 I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!

I got it figured out myself... yaaaaay for me!

Have an 8800 and need help

Hi,
I have an 8800 and need help. The charger socket doesn't work anymore, the trackball doesn't go horizontal (occassionally) and the screen light turns on and off at random. I've had my Blackberry less than a year.
Before sending it in for repair or replacement I need to back up all my data (apparently it gets cleared when a repair is done) so ordered a cradle and spare battery so I cound charge a batter externally. To compound the problem I keyed in the wrong postcode on the order (it never rains but it pours) but quickly mailed billing to tell them and with the correct PO number.
Needless to say the items haven't arrived so I called and was fobbed off and told that this is a matter for their partner Globalware Solutions even though I paid via the Blackberry.co.uk website
I've scoured the site and found no contact details whatsoever by which I can follow this up properly (Why do large companies do that? Are their customers not important enough to them to allow direct contact?).
Rim/Blackberry/Globalware now have my money and have ignored all my emails. In other words I have no way of finding out the status of the order, what's happening or where my required items are.
On top of that one of the email addresses I mailed to bounced and this site is a nightmare to use. If you're going to want a capital letter and a number of part of a password to access a forum then tell people in advance. If you're not going to let someone buy in Euros from the UK because you don't consider the UK as part of Europe then tell them. Don't let them go through the entire purchase process before letting them get to the Euopean drop down list of countries and then not including the UK in it. I could go on.
Can someone please tell me how I chase up my order (it's only a small one) without wasting too much more time on this.
I have to say that this is all a great shame because I've been happily using Blackberries for years now and think they're superb products. I've been an evangelist for them actively spreading the word about how great they are. I've never needed service or support before though.
If anyone from Blackberry, Rim or Globalware is reading this then you have my order number and just an email would at least begin to resolve this. The delivery of the items paid for would entirely resolve it. I wait for your contact.
One thing you should know if you wish to continue to ignore me though is that I am 'Mr Persistent'.
Jeremy

Thanks. I remember now that is exactly what they said. Which means I need to do it over again.
Here's what happened. I went to my laptop to try restoring since it was my desktop that was giving me the message. I was able to install the newest OS onto my iPhone. Then I reconnected the phone to my desktop, which now gave me a different message. It said it could not sync with this iPhone until I updated to the newest version of iTunes. I was one version behind.
So I updated and then since my iPhone had the newest OS and iTunes had the newest version, everything spoke to each other fine. At that point I got the message asking me to whether I wanted to restore from backup or set up as new.
I thought that restoring from backup would potentially bring back the problem, but discretion being the better part of valor decided to try that first.
Woke up this morning to your message and of course now realize that I must go through the process again, only this time set up as new. And yes I made sure to back everything up before I did any of this.
So now it's just a matter of doing it again, which will have to wait until tonight when I don't need to use my phone.
So thanks for the info!

Need your help I am color blind and need help ASAP

I am color blind and need help with this issue. I have the 8520 and t-mobile service. I went to the accessibility wizard and chose the reverse color mode. That is black background with white font. Here starts the problem when you select this option it changes your photos into negatives and also changes the home screen to bright gray . I can not see these colors. What I need is almost like looking at old DOS font Black backgrounds with white or yellow fonts. I have been trying to find a theme but no luck.
The option of reverse contrast would be great if it did not flip photos or the home screen.
Can someone please help me
I would be happy to talk to you in detail to better explain the problem.
Thanks in advance
TJ
I posted t this message in the wrong area before. I hope this is the correct area.
Mods please remove the message posted in the 8300 series area thanks TJ

Just a follow up on this matter. I spent most of the day and a few hours at work on this problem.
I called T-mobile and was transfered to Blackberry support within T-mobile then to Blackberry RIM . They asked the same questions as everyone else said how much they wanted to help. After about an hour they gave up. They could find no apps or themes that are basic black with white font. The tech could not explain why the designers fell short with reverse contrast . I ask this question why would a programmer or anyone want to see all photos in negative media. I spoke with a local news station about this whole matter and they said give the store one more attempt to make it right. T-mobile said they would sell me another phone at a discount but would not take the Blackberry back because I was out of my7 14 day window. note I have been trying to fix this with T-mobile starting 12/04/09 when I bought the phone. So buyer beware....
Back to the matter. a very simple fix could be done by BLACKBERRY make a theme for the 8520 that is black background white font in all areas. Leave the internet as normal ie: browser let photos look like they should and sell the theme or app like everyone else.
To be honest if I knew how to do it I would build it myself and give it away for free people need this type of theme.
Thanks for reading my rant everyone.
TJ
colorblindguy

IMac won't keep system settings. Mac OS X version 10.6.5. New to this and need help. Thanks

Just got my first iMac and am new to the Mac operating system. I figured out how to set it so I could connect to the internet and also set my wallpaper and screensaver to my liking. After I shut it down and turned it on later, all of my setting were gone. It reset itself back to the original settings it had when I got it. I bought it at an auction and it was previously owned by a local community college. I did not get any disks with it. I have searched the internet on how to fix it and am more confused than ever. I don't know if I have Leopard, Snow Leopard, Lion, etc.
The computer seems to work just fine. It boots up quickly is loaded with programs I have yet to learn. I do know that it sat unused for a year or more. Could it be that the internal battery could be dead? I have looked but cannot find any kind of diagnostic test or information regarding the internal battery on the internet. Not exactly sure what kind of info someone would need to help me fix this issue. The hardware overview I found in system profiler looks like this:
Model Name:                       iMac
Model Identifier:                   iMac4,1
Processor Name:                Intel Core Duo
Processor Speed:               2 GHz
Number of Processors:       1
Total Number of Cores:       2
L2 Cache:                             2 MB
Memory:                                2 GB
Bus Speed:                          667 MHz
Boot Rom Version:              IM41.0055.B08
SMC Version (system)       1.1f5
Serial Number (system)     QP********U2S
Hardware UUID                   00000000-0000-1000-8000-0016CB8BC90C
Any help or suggestions would be greatly appreciated and thanks in advance!
<Edited by Host>

The retail version of Snow Leopard is 10.6.3, so the only way this model would be running 10.6.5 is if someone installed a version of Snow Leopard that came with a new iMac model with 10.6.5 pre-installed. In effect this computer has the wrong version of Snow Leopard installed which could be the reason for your problem.
I suggest you do this:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
After you receive your Snow Leopard DVD do the following:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
5. Wait for installer to finish loading.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
     used to manage backups and to restore backups. Time Machine
     requires a backup drive that is at least twice the capacity of the
     drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
1. Cool Drives
2. OWC
3. WiebeTech
4. Firewire Direct
5. California Drives
6. NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

I have recently bought a zen touch (20gb) and need help putting music on

I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.

You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.

Leopard Suddenly Running Slowly and Need Help

Hi there. I have been a Mac user (and Mac support person at work) for many years. I've recently run into a problem that I'd like some help with.
I have an iMac that I bought 4 months ago, and I upgraded to Leopard and then put 10.5.1 update onto it.
Nothing of any note has occurred with my computer in the last 2 days, however, 2 days ago, every application started running very slowly. I click on the HD icon, and the spinning color cursor spins for 30-40 seconds before the HD opens. I click in the bottom tray to open Safari, and it takes 40-50 seconds for it to open (as the color cursor spins away). I reboot, and the iMac comes up with the front white/gray screen and holds with the spinning circle for anywhere from 20 to 45 MINUTES before going to the desktop. I have reinstalled Leopard (telling it to Archive and Install). Same problems abound. I ran Tech Tool, and it says everything is fine. I started up from the Leopard install DVD and ran Disk Utility. Checking the progress log, it tells me that the HD cannot be unmounted (meantime, I've booted from the DVD and nothing else is attached or running). When I select "Repair Disk" in Disk Utility, I get an immediate message that the HD cannot be unmounted.
What does this sound like? A hard drive failure? Will completely erasing my HD and installing Leopard from scratch (as opposed to installing Tiger and upgrading to Leopard) help? Or am I merely band-aiding the problem and need to take it in for qualified Apple Tech support?
I'd appreciate any help.
Thanks.

Hi and welcome to the Apple forums.
I would run DU and check the disk and the permissions.
If necessary use DiskWarrior
You might also zap the PRAM and NV-RAM.
Check the console log, other logs and of course the activity monitor.
If it is noticeably slower, what is causing it should be rather obvious.
It could be a failing drive that is being re-read multiple times to extract data from a bad block/sector.
Be sure you have everything backed up. !!!
Message was edited by: nerowolfe

Screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

My screen freezes and popup message says I need to do a shutdown and then restart. It does it sometimes 2 times a day. Im new to apple and need help.

Bad or incompatible RAM is, more often then not, the cause of most Kernel Panics. It could also just need to be reset.
Here's the most used site for Resolving Kernel Panics. Please do all the steps in order, even if you don't think you need to do a certain step.
Here is a great MacFixIt article.
 Good Luck!
DALE

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help

Uloading ebook using iProducer rec'd error: ERROR ITMS-9000: "Unable to parse nav file: toc.ncx" at Book. I don't understand and need help fixing it. Please Help if you've the knowledge.
Many Thanks

Yep, i just did it again. The entire scroll-bar widget, complete with formatted text, graphics, etc., pasted itself nicely in another book. Two different files, the same widget.
I use the scroll-bar widgets for most of my texts. (I have audio buttons on the side, and the scripts are within the widget, to the side). My only text is within widgets, and text boxes, naturally.
I am following your recommendation: cleaning files, etc. I am remaking the book anew. I need to convince the EPUB bot or whatever that my file looks and works nicely on all my devices. You would expect an error message when previewing the book: 'Hey Amigo, your file is flawed, stop working on it, and get back to the drawing board." Should be able to try again next Monday.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

I just got logic and need help i dont know how to make a track at all

i just got logic and need help i dont know how to make a track at all

Pancenter wrote:
There was a time not too long ago when people respected the incredible amount of talent that contributed to this software...Everyone -wanted- to learn about the craft and "art" that goes into being a good engineer, musician, producer...etc.
Beginner's did enough reading and experimentation to at the very least, ask an intelligent question.
pancenter-
Hey Pancenter there are still lots of us about.
I wouldn't take the original post too seriously - I may of course be naive but it sounds like it could be a troll to me!
I learn a lot from reading the posts of the likes of you, Erik, Bee Jay, sampleconstruct, noeqplease etc so I hope you guys don't become too dispondent when you see posts like these.
By the same token, I hope the Logic team continue to use their talents to develop powerful software that caters for the professional user, while allowing Garageband to continue to do its (excellent) job of providing for its market.

My ipad device does not come up on itunes, need help fast:/, my ipad device does not come up on itunes, need help fast:/

my ipad device does not come up on itunes, need help fast:/, my ipad device does not come up on itunes, need help fast:/

Hi, Nancy.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing an error that begins with 0xE.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221
Cheers,
Jason H.

Help, new to Linux and need help installing 8i

I am new to Linux and some of this stuff..
Yet,I have gotten the JDK116_v5 installed and working on my box.
I have cut a cd for Oracle8i and need help..
I have also recopiled my kernal as well...
Does any one know where I can get help...
null

Al Pivonka (guest) wrote:
: I am new to Linux and some of this stuff..
: Yet,I have gotten the JDK116_v5 installed and working on
: my box.
: I have cut a cd for Oracle8i and need help..
: I have also recopiled my kernal as well...
: Does any one know where I can get help...
Try http://www.akadia.com/html/dod-frame.html for Redhat.
http://www.suse.de/~mha/oracle/ for SuSE
Also peruse these
http://www.akadia.com/html/dod-frame.html
http://jordan.fortwayne.com/oracle/
Colin.
null

If anyone could help me I would be HUGELY appreciative - Uni deadline today and need help!

Similar Messages

Maybe you are looking for