If sending a txt message fails (due to network, et...

Is there a way to get an error message back if a txt message does not go through the netwrok successfully?  The outbox icon shows up on my main screen but I would much rather have an error message so I can try to send again when there is better network coverage.  Is there a setting on the phone to control this?
Thanks

you need to ensure your message settings are correct and that the file size is not over your networks capacity most phones now will tell you this also clear all outbox and sent items to free up phone memory
If  i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

  • Unable to open PWA in browser and MSP on application server in project server 2007. ERROR: Sending the Soap message failed or no recognizable response was received.

    Hi All,
    I am using project server 2007 and WSS 3.0. 
    I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
    Everything is correct whether it is URL or MS Project profile account on MSP.  This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
    When i try to connect to MSP on App server, i get the following errors in event viewer.
    Event Type: Error
    Event Source: MSSOAP
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: Connection time out..
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: An unanticipated error occurred during the processing of this request..
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description: Soap error: Sending the Soap message failed or no recognizable response was received.
    Event Type: Error
    Event Source: MSSOAP
    Event Category: Client 
    Event ID: 16
    User: N/A
    Computer: APP-Server-Name
    Description:
    Soap error: Unspecified client error..
    One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
    sandeep

    Hi Paul ,
    Thanks for reply. The project server URL was already added to the Trusted
    Sites/Local Intranet areas in IE. 
    sandeep

  • Update N80 Firmware Cant send/receive txt messages

    Hi all, first of all im a newbie so please forgive me if im asking stupid questions.
    Since purchasing my N80 i had a few software problems so i used nokia software updater yeterday, it seemed to install ok and restored a back up i had using nokia pc suite.
    this seemed to fix the memory low close applications and try again message i received when viewing pics and vids in the gallery however i can no longer send/receive txt messages, They gow into outbox and constantly try to resend. I am now running V 4.0623.0.41 26-07-2006 RM-92 NOKIA N80 (58.01)
    Any help would be much appreciated THANKS MIKE

    Can't you use the settings wizzard. You can download it from this site.
    Is that an N95 in your pocket or are you just pleased to see me?!?
    Life's too important to take seriously.
    Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
    I'm a 26 year old boy BTW

  • How to send an e-mail to the sender if the messages fails in XI

    Hi frndz,
      I have a reuirement where in, the XI should be able to send an e-mail to sender, if this message fails in the XI.
    And the e-mail should consist an
    1) Payload of the message
    2) Description of the error
    and also the Receipients of this email should be  editable...
    Kindly reply asap, points will be awarded according to the solution...................
    Regards
    Sai

    HI,
    have you referred the Alert Framework that could give you the Mail notification also.
    But it will not give you the payload as part of mail.
    Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
    /people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
    Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    Configuring scenario specific E-mail alerts in XI-CCMS: Part u2013 1
    /people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
    Thanks
    Swarup

  • Photo upload to iCloud fails with the error message 'Upload failed due to network error'. Ideas?

    I am trying to get my photos on my Mac Mini onto my iPad 2 via iCloud. I have tracked the problem down to upload failure from Mini to iCloud. 1St (&every) photo upload fails with the message 'Upload failed due to network error'. Any ideas?

    I doubt this issue is related to the Mac Mini specifically.
    I have 44 photos shot with an iPhone 3G that will not upload to iCloud Photo Library. I try and drag-and-drop them onto the web interface and I get the same error message you did:
    Upload Failed
    44 items were not uploaded due to a network error.
    However, I have another 62 photos shot with the same iPhone 3G that upload without issue. And I just uploaded 440 photos from an iPhone 4 without issue.
    I thought it may have something to do with certain EXIF tags missing on the photos that would not upload but I have not been able to figure out a pattern when comparing photos that work and photos that don't work.
    The photos that won't upload open fine in QuickLook, Preview, and Pixelmator so I doubt the image is corrupted in some way.
    I can AirDrop the photo to my iOS device and it will upload to iCloud Photo Library, the photo/video count will be incremented on the iOS device and iCloud Photo Library but the photo will never be displayed in iCloud Photo Library. When I delete the photo on the iOS device the photo/video count will decrement on the iOS device but will remain the same in iCloud Photo Library. When this occurred the following error was thrown in the iCloud Photo Library web interface:
    Expanding Details shows the following log:
    https://gist.github.com/jameswthorne/757e319b9fee63119890

  • Lync server call failed due to network issues

    hi,
    i receive an error while making a lync call to an internal user
    "call failed due to network issues"
    i have two ip's installed on My NIC but when i remove one ip of the ip's from
    my nic, everything seems to work fine.
    Kindly help

    Hello Matt,
    Hope you keeping well..!!
    We are communicating with external customers lync server through federation option setup on our corporate lync server.  We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
    that we were able to browse the customer contact through corporate lync account.
    We were also able to chat with external customer but however voice/video functionality are not working through same session.  Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
    We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync.  Could you pl help or guide with the way.
    Thanks

  • Get Publish failed due to network error on Publish

    Everytime I make a change to my web site within iWeb then do a Publish I get a message "Publish failed due to network error. Check your internet connection and try again".
    Although I get the above message my changes do get made on my web site.
    I am on high speed internet. I have received this message every time I do a Publish after making changes for the last several days.
    http://web.mac.com/johnnelsonhomes is web site address. Again, changes are getting posted most times, although not always.
    Any ideas?
    Thanks in advance.

    I have been having the same problem. I can access my iDisk, but cannot publish to it. When I try i get a 'cannot publish due to network error' message. I can successfully upload the same website to my 'GoDaddy' hosting acct. This is what I have done so far without success:
    Turned off all commenting and searches and .mac specific services.
    Tried connecting directly to my DSL modem to try to eliminate any problem that may be introduced by my router or firewall settings.
    Reformatted my hard drive and re-installed OSX (clean). Patched the new system with all available updates. I did not restore from my back-ups to ensure that any corrupted settings would not be brought forward to the new install. I then created a simple one page site with iweb and attempted to publish to .mac. Even this failed. I am not sure what I could be missing. I had been publishing for months without any problem. Then I started getting this problem occasionally, and now I get it all the time. The only thing I can think of is if there is possibly a network latency problem causing the connection to time out.

  • Call failed due to network issues

    call failed due to network issues lync 2010 client. even when i'm trying to do a test call from my system, same error comes.

    Please, share more details on error from logs. Also check firewall ports.
    The Media Relay Authentication Service (MRAS) is responsible for notifying the Lync client of the STUN and TURN IP address for ICE.  This service
    run on UDP port 3478.
    To check that the UDP port is open on the firewall between the Internal Lync clients and the Edge server running this service you can use the Microsoft tool PortQry
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • HT204204 Error invalid number when trying to send a TXT message

    While trying to send someone a TXT on craigslist, I inadvertently sent a TXT to a 7 digit number. I received back the following message (Where <XXXXXXX> is the 7 digit number I tried to TXT).
    I'm using an iPhone 6 (brand new) with the latest iOS. Handoff and TXT message forwarding is set up.
    From +1 (1) (216) 116-11:
    <XXXXXXX> Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code. (The message I sent went her).
    After that I attempted to send to the correct 10 digit number but every subsequent attempt to message the correct number has failed. I have tried the following:
    Hard reset of the device.
    Deleting the conversation
    Creating a contact with the correct number
    Using Messages to create a new conversation
    Replying to messages received from the number.
    However nothing I've been able to do resulted in a message getting sent.

    I think your region settings are interfering the format of the US number. What country are your region settings set to?
    This is how they should look: +1 (216) 116-1122
    The +1 is optional when inside the USA/Canada

  • I have just updated my iphone to the new ios6.1 and whenever i send a txt message to the girlfriend i recieve the same txt..... i dont understand

    I have just updated my phone to the new ios6.1 and whenever i send her a txt message i recieve it in my inbox... any help?

    please help me

  • Txt messaging failed, is that okay?

    im having problems sending txt messaging, my friends does not get the full txt i do not whats going on.. someone can help me please?

    oscar7 wrote:
    thanks guys... but i already checked with att and they changed the sin card too, before my friends got the txt but with codes now they get just any parts of the txt
    Does your friend have issues with texts from anyone else? Might be worth them replacing their SIM card. Are they on AT&T as well?
    Do you have problems sending texts to anyone else?

  • Sync messages failed due to high load

    Hi!
    On our test system we had a very high load of async messages for 3 - 4 hours. The async messages were processed successfully but all sync messages failed during this time frame! As soon as the high load of async messages stopped, the sync messages started executing successfully again.
    Has anybody also experienced this kind of problem and what can be done to avoid this issue? Thanks for any input and suggestions.
    Regards, Tanja

    hey Tanja,
    i had a similar issue when testing the box with Load runner, that a simple sync scenario fails when the size of payload or attachment is high, the thing that i did is just increased the virtual memory ,
    You can also check the trace files to figure out problem ?
    This might not be a definitive answer , hope this helps,
    Vara
    [PLEASE REWARD FOR POSTING]

  • Unable to make a phone call or send a txt message through Siri

    hi,
    i live in Sudan & i just bought an unlocked AT&T iphone 4S , i've been trying to use siri to send a txt msg & make a phone call but it says it cant help me with that, how do i fix that?!

    Of course i do, but it still wont work ... when i try she says "Sorry she cant make that phone call" when i ask " Why" she answers " i dont know. i've wondered that myself"

  • "Publish Error: Publish failed due to network error. Check your internet co

    I am using the very latest version of iWeb. I have had it for a week.
    First let me tell you the message that I got and then what I was doing prior to getting the message:
    It said: "Publish Error. Publish failed due to a network error. Check your internet connections and try again."
    I did check my internet connections and I called mt cable modem ISP. He put me through some tests and ascertained that the problem was not with the cable connection. I can connect to the web (of course) and I can send and receive email. The fellow at the ISP (Road Runner) told me that the uploading goes just fine but that the confirmation end of it is bad.
    I have made 9 pages for my website. I clicked the button to publish the 10th page and got the message at the top of this post.
    Then I called Apple Care and took advantage of the 90-day help warranty. The gal there had me try to publish to my private folder. That worked! I was able to publish to the folder and that message at the top of this post did not appear. It said that the page was published and did I want to visit it.
    I ended up deleting the page about my friend Lerma, since everything was going fine until I did that page. AS I recall, there was a mixup with the pages and I thought I had fixed it.
    Then I worked a little more on my husband's Memorial Site and tried to publish and got the same bad message as above, meaning that it wasn't just the page about Lerma but any page I might be doing since doing her page.
    NOW THIS IS THE ODD PART:
    I went to the website on Safari browser with the intention of checking out the other earlier pages, only to discover (happily) that my husband's memorial page (the beginning of it) WAS THERE even though I got that message saying that there had been a network error. Lerma's page, however, was NOT there.
    I am between happy knowing that a page can show up on the website even though I get a message saying that it did not, but anxious knowing that if I am getting Publish Error messages, something is screwy with the program.
    I will continue to try to publish to the Internet, but meanwhile I welcome any observations and happy accounts of how they got the same message but everything ended up fine after a while.
    Meanwhile I am going to be working on my pages even though right now I am getting those messages saying that they could not publish due to network error.
    I need a break.
    — Lorna in Southern California

    Hi Lorna!
    Sorry to hear that you're getting the dreaded
    "Publish Error" message from iWeb. Lots of people
    have reported getting this type of error...and I
    don't think it ever really has much to do with the
    network...at least nothing that can be fixed. The
    fact that you have been publishing just fine up until
    now is a good thing. Some people have NEVER been
    able to publish to the web. Hopefully this problem
    will clear itself up. Maybe it's just sunspots or
    something. Probably someone thinks you need a break,
    too.
    Is this the kind of thing that would warrant me going back to the Apple Store to get an exchange???
    — Lorna in Southern California

  • Why does my email address display when I send a txt message to another iPhone user?

    When I txt MSG another iPhone user, my email address displays on their screen as sender's name.  Is this because I have my email address set as my apple ID?  Can I change my Apple ID name to stop this?

    Go to Settings > Messages > Receive At > Apple ID.
    Sign out of your Apple ID followed by signing back in with your cell phone number selected as your iMessage Caller ID.

Maybe you are looking for