If SO line item is rejected, will PR and PO be cancelled automatically?

Hi!  Just want to ask, if an SO line item is rejected, can the PR or PO line item be automatically cancelled as well?  If not, can the PR and the PO still be used even if the SO has been set to Rejection status? THanks so much!

Hi Angela,
Unfortunately, it is not so, owing to a lot many business reasons, the material concerned, can be ordered and received against the sales order, it will be a sales order stock E.
You can anytime do a stock transfer to unrestricted to use it.
Regards
Shailesh

Similar Messages

  • Line item is rejected in the contract but release order is created.

    Dear all,
    as i mentioned that the line item is rejected in the contract so it should not allow to create the release prder or any further process but then also it is allowing to create release order.
    please help is resolving the issue
    is it a product related bug or functional error
    please help me in rectifying the error.
    Regards
    Subrat

    Hi
    Suppose in a contract if you reject a line item by assigning reason of rejection then when you create a release order with reference to that contract that particular item will not get copied and you will get a log in the release order with regard to that
    Suppose in that release order if an user manually  enters the rejected item some qty
    If this is what you are asking
    The ans is system will accept and in no way you can stop it or control it in std SAP
    You need to develop some user exit for that
    I think it is functional error
    This scenario was tested by me
    Regards
    Raja
    Edited by: ramanathan raja on Oct 4, 2008 1:15 AM

  • Undeleting a PO line item with multiple account assignment and PO history

    I  am getting error message
    PO history already exists (Multiple account assignment not possible)
        Message no. MEPO841
    When attempting to undelete a purchase order line item that has GR (nonvaluated) and Invoice postings.
    Sequence of events.
    PO line item was created with mutlitple account assignments ( 50/50 distribution) and GR nonval flags on.
    Invoice Posted (blocked for payment)
    GR done
    PO line item marked for deletion.
    Now getting MEPO841 when attempting to undelete.
    Tried to Reverse GR and cancel material docuement - unable to do so - message no selectable items in PO
      (even with check zero indicator )

    Hello Dan ,
    Error message MEPO 841 is only issued if you have Multiple account assignment function (MAA) activated. Multiple account assignment function is a new business function developed in Release 604.
    If you have MAA active, you are not allowed to change a single account assigned PO which has GR posted to a multiple accounts assigned PO. If this is tried , MEPO 841 will stop you from doing this change.
    If you want to have your old functionality in the lower release, you should switch off the business function LOG_MM_MAA_1 ( MM Multiple Account Assignment )  in Release 604.
    Please switch the business function LOG_MM_MAA_1 off in test environment  and test the problem again in a productive system.
    I hope this information has been helpful in solving your problem. Please let me know if you have any further questions.
    Thank you.
    Best Regards,
    Frank Farinella

  • EDI sales order line items that can not fulfilled and completed.

    Dear all,
    My requirement
    I have multiple EDI customers that send in orders daily where their requirements is that if the ordering item qty can not to fulfilled on the day then the line item in question on the corresponding created sale order needs to be automatically rejected along with a suitable and descriptive reason code.
    I'm looking to have this a seamless as possible and don't want to have the user manually review stock, edit sales orders or ATP check as they do now
    I've looked at the partial delivery settings on the customer master and customer item but I think this just warns that the customer requires complete deliveries.
    I apologise now as SD is not my thing, but if anyone has seen this situation before or has a standard solution I'd be grateful?
    Rgds

    Hi Braven,
    Ram has given good suggestion. I would like to add on it.
    If the quantity is not availabe put a reason for rejection , this is fine. But we dont need to create a new line item.. right.
    Because this way it will pile up line items in sales order..
    Instead put the logic in such a way that, when qty is not available put a rejection.
    If qty is partially availabe, then process the qty and create a new line item for the remianing qty. ( this is ofcourse if the customer agress on partial deliveries ).
    The above is on assumptions that your users review orders which are on rejection and process further.And other assumption is your customer agrees on partial deliveries.
    This is how we mapped in our system.Hope it helps.
    Regards,
    SB.

  • Fbl1n and fbl5n display at time line item wise name for vendor and customer

    Hi
    Could you tell me how can I include Customer or Vendor names for each line items in transaction FBL5N and FBL1N, please? Customer Accounts are displayed well, but in several cases we also need the name of the certain Customer or Vendor account names. This would be important for consolidation of customer accounts of the same customers.
    It is possible to include in these reports the u201EName1u201D, but they are empty in all cases. Could you tell me how it is possible to correct this problem, please?
    ysr

    hi YSR,
    See if you want to have the Vendor/ Customer name or number to be displayed when you execute it. I mean on the Vendor/Customer Line Item Display.
    THEN follow the below steps........
    After executing the FBL1N or FBL5N Click CTRL+F8 or Change Layout.  From the Pop screen select the Vendor from the Right side of the screen and then drag to the Left side of the screen, then click on Copy as.
    Then Save the Layout or CTRL F12, save the layout with the new name that you want.
    When you want this Layout as the default each and every time then u have to do 1 more step....
    After executing the same layout go the
    MENU> Settings>Layout-->Administration...
    there you select the layout that u have created and then set that layout as the Default settings Check mark on DS.
    So that each and every time when u execute it the same layout will be displayed with the fields that u have selected....
    Hope this will solve ur issue......
    Kumar........

  • Classification of line items into the Detailed Profit and Loss report

    Hi,
    Given a line item in a profit and loss ledger, what field determines that the line item will appear under Fixed Manufacturing Costs, Sales and Distribution or General Admin Expenses when we generate the Detailed Profit and Loss report?
    Thank you

    Hi all,
    Thank you so much for everyone's quick reply. I really appreciate it.
    Please allow me to clarify my question.
    I have a balance of 3,712,126.60 in my GL 30000000. In my detailed Profit and Loss (ZPL-002), 705,712.90 is shown under Gen. Operating Exp. while 3,006,413.70 is shown under Fixed Manufacturing Costs.
    So, what field does SAP use to allocate those line items between Gen. Operating Exp. and Fixed Manufacturing Costs? Is it Functional Area only?
    Thank you.

  • User-exit to fill PO line item G/L account no. and other details

    Hi All,
    I am looking a customer function or a BADI to fill in the account number when PO is about to be created.
    My requirement is that based on some conditions account number in Account assignment tab for PO line item should be filled or overwritted if there is already a one selected, so that when user see the value for account number, it is the desired one.
    I tried with exit EXIT_SAPMM06E_006, which has the table TEKKN(account assignment for purchasing document) parameter but when I debugg it and assign some other value to TEKKN-SAKTO for the corresponding line item, I can see that changed value is not coming.
    Any clue?
    Regards,
    Mark

    Hi Mark,
    You can try implementing follwoing BADI's:
    ME_GUI_PO_CUST
    ME_PROCESS_PO_CUST
    Let me know if it helps.
    Gouri.

  • Fbl1n and fbl5n line item wise display the cutomer and vendor name

    Hi,
    My user is asking report for fbl5n and fbl1n line itemwise dispaly vendor and customer.See the report for one time vendor and customer name displaythe line item wise display in FBL!N/FBL5N. but not the display the regular vendors/customer.So one time table name BSEC
    Please advise
    Regards.
    Edited by: yps y on Nov 13, 2008 1:26 PM

    Hi,
    line item reports FBL1N/FBL5N are reading the line items (wow, what a big surpise ) and displaying information on line item level.
    As the vendor/customer name is NOT stored in the line items, you cannot display this in the lines (along with other item level information., like amount, posting key, doc.type, etc.). You may find a field called "Name 1) in the field catalog when configuring the ALV layout but this is empty for normal customers/vendors. It is only filled in for one time (Cpd) customers - the reason is as explained above: for these special accounts, the name IS stored on line item level (it varies from item to item),, that's why it can be read and displayed in the items.
    Now how about normal customers/vendors?
    You have to activate Business Transaction Event 1650 and implement a simple code so that depending on the account type (D = customer, K = vendor), you get the business partners name from table KNA1 / LFA1 and put it into field Name1.
    Hope that helps, points welcome
    Csaba

  • Seperate Line item for taxes in MIGO and MIRO

    All SAP Gurus,
    We want to inventories the CST (central sales tax) amount.
    For this we have used the condition type JIPS, check marked the accounting key 'JI7' and gave posting indicator as '2' Separate line item.
    Now, CST amount is getting inventorised at the time of GR. (but no separate line item is created at the time of GR).
    During MIRO, the inventoried CST amount is getting deinventorised (although separate line item being created here).
    Can we have separate line item in MIRO, without getting value deinventorised? (as it happens for freight)
    Regards,

    Hi Kunal,
    Thanks for the reply.
    As you have rightly said, we need to tick 'NOT DEDUCTIBLE' in OBCN (we have already did that).
    And key has been already assigned in Atx procedure for the appropriate condition type.
    But the problem is that, we want separate line item for this tax amount in MIGO.
    Is it possible to have separate line item for the tax amount in MIGO (as we can get separate line item for freight in MIGO).
    Regards,

  • Adding line items in to a PO and PR using a Bapi

    I need to change PO and PR and add several line items to each of them .
    Can addition of line items to Pr and PO be achieved via a Bapi .
    Please suggest.
    Many Thanks

    Hello Aditi,
    About Purchase requisition, unfortunately you cannot add new item with BAPI_REQUISITION_CHANGE,
    you have to create a your own bapi, but this is a long process to do (I think could take 2-3 days or more).
    About Purchase Order ( BAPI  BAPI_PO_CHANGE ) you just have to specify all the data for the          
    new line including the item number.  Be sure to put the new item number in the field PO_it in tables POITEM, POITEMX POSCHEDULE...
    Regards,
    Mauro

  • Why every time i shunt down or wake up my mac, the Wi-Fi connection will lose and can't connect automatically back to the Wi-Fi, But I can still connect to Wi-Fi manually. PS. My home router is 108.2 N  and my mac is using 108.2 AC.

    HI,
    I got a question that quite annoying, For every times I start or  wake up my comouter, the wi-fi will lose the conntetion automatically.
    My mac is using Wi-Fi AC but my router is using Wi-Fi N, will that cause a problem ? My other mac that is using wi-Fi N is work perfect with the Internet .
    Thank you for answer the qustion.

    Not sure if your problem is exactly the same as in the following thread, but JAHelms posted a fix that seemed to help quite a few people:
    https://discussions.apple.com/thread/4342982?tstart=0
    If that doesn't help, here are some other troubleshooting suggestions:
    http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/

  • STATUS_READ & line item rejection reason - too complex

    Hi All,
      I have to trigger an output to a smartform via an output routine. I have to do the following checks in my output routine before I decide to propose the output or decline to propose the output if conditions fail.
    1. Order header can have status PEND, Hold, Release. IF the status has changed to anything else except pending, i should propose output.
    2. Again if a line item is rejected with certain reason code, then also I have to propose the output.
      Both the above conditions must be checked before proposing the output. My issue is how do I know what was the old value of status and rejection reason.
    I tried using FM STATUS_READ, but it does not give something like this was the old value and this is the new value. I do not find any FM to get item rejection reason. Do I have to use change documents for these.
    examples
    a)Order with 2 Framing Configurable Line Items.  The user status of the order is changed from PEND to QAHD.  The standard order output label is proposed for both line items on the order.  At a later time, one of the line items is rejected for reason 90 (for example).  At that time a new label is created, just for that specific line item – with the rejected artwork text on the label. 
      In this case if I use STATUS_READ, i will get active status as QAHD, so I will try to propose normal output so I am fine. Later when the item is rejected, I will again get staus as QAHD and I will propose output for one unrejected item which is WRONG. I had already proposed the output in past, so I should not. I should only propose output for the rejected item.
    b)Order with 2 Framing Configurable Line Items.  The user status of the order is still in a PEND status.  The user changes one of the line items to a rejected for reason 91 (for example).  A label is printed just for that line item with the rejected artwork text on the label.  At a later time, the user status on the order is changed from PEND to QARD.  A label will print, only for the unrejected line item and the label is the standard order output label for HJ.
      In this case I do not know where to get the old rejection reason of item. If I do a database select, I will get current rejection reason 91, but how do I know if I had already proposed the output or not for a certain item.
    c)Another scenario to think about is that there is nothing preventing the user from setting a rejection status on an item and changing the user status at the same time and saving it.  In that case we would want only one label per piece (the rejected label for the rejected item and the standard label for the non-rejected item).
      I think I have to check the time order was updated and do something like that.
    All inputs are welcomed.
    Thanks
    Pulin

    Write the code like
      concatenate 'OR' int_orders-aufnr into d_objnr.
        call function 'STATUS_READ'
             EXPORTING
                  client          = sy-mandt
                  objnr           = d_objnr
             TABLES
                  status          = t_status
             EXCEPTIONS
                  object_not_found.
    Read table t_status with key stat = 'I0076'.
    if sy-subrc eq 0.
    do not print output.
    endif.
    Thanks
    Seshu

  • Rejected line items on a sales order

    Hello SAP Friends! 
    Is there a way if line items are rejected on sales order to not have it print on the sales orderacknowledgement ouput?

    Kimberly
    If it is standard program and config is done,  it should work by itself. I am wondering why not.   Fine, if it not working, why don't you put a requirement in the output Determination Procedure against the relevant output. You need to copy standard requirement 2 ( Program LV61B002)  and  insert logic to not print if ABGRU  or DRAGR is populated? This will be a 2 minute code to write.
    SPRO/IMG/Sales and Distribution/Basic Functions/Output Control/Output Determination/Output Determination Using the Condition Technique/Maintain Output Determination for Sales Documents/Maintain Output Determination Procedure
    But why don't you leave struggling with reasons for rejection and work with Delivery blocks instead. I suggested this before to somebody else in the forum. I think Delivery blocks (DB)  work  equally well without the bad effect of reasons for rejection (RRJ). Its like this: In stead of deleting an item, use RRJ, In stead of RRJ, use DB. Having said that, I am skeptical that it may also (not) work similar to RRJ. Try it after the Requirement  (above) option.
    If you want to go that 'route' (Pun intended):
    SPRO/Logistics Execution/Shipping/Deliveries/Define Reasons for Blocking in Shipping
    Let me know how it goes.

  • Moving the Shopping Cart workflow forward in a approver Rejects a line item

    Hi Friends,
       We a facing an issue while Shopping Cart Approval process.
    We have designed our SC Workflow , with Schema and 4 Process levels. Currently the Approvals are happening fine.
    Issue is happening when a Line Item is Rejected by a Single Approver. The Approval process does not move forward.
    We need need to move the SC process forward.
    Ex: SC: 1000000032
    Approval Flow:
    ITEM1:  APP01 -> APP02
    ITEM2:  APP05 -> APP07
    Scenario:01 :
    Once APP01 & APP05 approves in first level.  Then APP02 & APP07 approves . Then the process completes.
    Scenario:02:
    Once APP01 Rejects & APP05 Approves in first level. Then the SC WF does not move forward.
    How can I move the WF process forward once a approver rejects.
    Need your inputs.
    Regards,
    Jagan

    Hello Markus,
    what you describe does not correspond to condition standard determination to know if decision has to be checked or not.
    Indeed, this evaluation is done by /SAPSRM/IF_WF_PROCESS_SBWF~IS_DECISION_ACCEPT_REQUIRED method from /SAPSRM/CL_WF_PROCESS_SBWF class.
    Inside this method, the default behavior is based on decision of current process level:
    - If it is not "rejected" or not "approved" (this means, if it is "inquired"), there is an interaction
    - else, there is no interaction.
    Then, for "rejected" or "approved" decision, a Business Rule evaluation is done in order to check if the document responsible need to accept the current decision.
    If evaluation ID is true, acceptance by Contact Person is required.
    I am currently not able to check workflow behaviour for partial rejection when no acceptance by contact person is customized.
    I will see this next week.
    Regards.
    Laurent.

  • Cannot reject/delete sales order line item due to del.date in 2210

    Hi all,
    not sure if anyone else had this issue already....
    Situation :
    Sales order line item entered with delivery date in 2210.    We would like to correct this order but can't....
    every time SAP issues error :
    Error determining posting period (info
    S008, variant GL, RC 3)               
    I believe this is because we haven't maintained our calendars yet for 2210 :-D
    Question : without us having to load/define the calendar...is there a utility/oss program which we can use to delete the line item, or reject it...or even update the delivery date?
    Thanks for your help!

    If the system pop ups the error message M2012, then please refer note 10891 or 37532.  If the error message number is different, please update the forum.
    thanks
    G. Lakshmipathi

Maybe you are looking for