If your ipod wont connect when using ipod updater fix here

http://www.kelleytown.com/ikelleytown.htm#DriveLetter if your ipod is assigned to drive letter c this will help you.

Just get a Mac and you won't have to F with drivers.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Similar Messages

LabView 6.1 crashes now and then when I try to get rid of an accidential starting connection when using the wiring tool.

Sometimes when using my labtop it happens that I get unwanted connections when using the wiring tool because my labtop notices mouse clicks that never happend. Usually you can get rid of those connections by pressing ESC. But unfortunately now and than LabView crashes completely when pressing ESC to get rid of the connection.
How can I stop LabView from crashing in that case?
Thanks for anybodies help!

Yes, I see this problem on both my LabView-Computers but more often on the labtop because of the strange integrated mouse.
Yes, I get an error message but I can't really translate it in english. It says something about memory access to a special address.
I might try reinstalling LabView one day if I have the time. I don't want to try LabView 7.0. I'm afraid it would be great. Unfortunately my boss alreday told me, we don't have money for the new version.
Thanks for your help!

OS 10.4.6. has broken dialup connectivity when using fast user switching

I installed OS 10.4.6. It seems to have broken dialup connectivity when using fast user switching when switching from one user to the next.
For dialup, it is extreamly annoying that I can not resume downloading a file from were it got cut off, but now, if another user wants to check their email, my download always gets broken and has to be restarted. Dialup is slow enough with out having to start from scratch even more frequently, now.
Also, in earlier versions of 10.2 or 10.3 (I don't remember which), I was able to switch users and maintain listening to a single users' iTunes.
I would like to be able to switch users and not lose either my dialup network connection or the primary users currently playing iTunes songs.
Perhaps for iTunes, one should be able to chose to mute another users' instance of iTunes, if it is currently playing.
Mini-Mac 1.42GHz 80GB BT/AE Mac OS X (10.4.6)

I have not tried replicating this but might be able to provide some additional information.
We use network login accounts on our desktop computers. Fast User switching deliberately will not work for multiple network login accounts. (Remember network login accounts normally also have an associated network home directory mounted via AFP.)
Now a bit of background about volumes and mount points under Mac OS X. Under Mac OS X, any additional drive (or more accurately 'volume') is listed under the 'Volumes' folder, remember also that Mac OS X is a Unix operating system. So just as normal for Unix, the boot drive is '/' or the root level and Volumes is a folder in it. The underlying Mac OS X software automatically 'attaches' and additional volumes as sub-folders in the 'Volumes' folder (in Unix speak these are called 'Mount Points'), if you have an external hard-disc called 'Fred' then this would be represented by the following path
/Volumes/Fred
If you happen to have two volumes with the same name connected at the same time then while in the Finder they may show up with the same name, in Unix they would have different names automatically assigned to keep them separate like so
/Volumes/Fred
/Volumes/Fred 1
Now getting back to the Fast User switching problem and AFP volumes, when you login to a File Server volume it also is automatically added to the Volumes folder, so if we have a File Server volume called 'Shared' it would look like
/Volumes/Shared
With Fast User switching potentially both user accounts could be accessing the same /Volumes/Shared which means both user accounts would be talking to the server via the same File Server login, hence the possibility for one of the Fast User accounts to be using the 'wrong' permissions.

Can you share your keyboard and mouse when using S...

can you share your keyboard and mouse when using Skype Screen share?
I want to give a remote user access to a application on my computer. Is this posisable with Skype?
Can you share just one application on yourscreen and not the complete screen?

you can share both your entire screen, or just a specific window of program in your computer. it is not possible to give someone a remote access to your computer through skype, and it is also not possible to share your mouse and keyboard.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

HT5573 While updating my laptop i lost my internet connectivity. when i tried updating it again ,it shows network error. what i am supposed to do?

While updating my laptop i lost my internet connectivity. when i tried updating it again ,it shows network error. what i am supposed to do?

Delete and recreate your settings in the Network preference pane. If you're connecting to a wireless network, also delete the AirPort network password(s) in the Keychain Access application.

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

HT4972 i have the first gen ipod touch, version 1.1.5   it wont connect to itunes to update, and cant use safari because the browser version is un supported. trying to get it running best i can, but it wont let me update it.   why?

help

iOS: Device not recognized in iTunes for Mac OS X
or
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem
After you get iTunes to see the iPod update to 3.1.3, the last update for the 1G
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage

Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

Dropped connection when using Desktop and laptop

I have a Motorala cable modem connected to a Linksys 10/100 5-port Work Group Switch. I have my desktop connected to this switch and have a WRT5G Wireless Router connected also. The problem is that when my lap top is connected to the internet, the desktop does not connect and vice versa. When the desktop is connected, the laptop shows that there is a wireless connection, but the browser comes up saying no connection. Any advice?

Why exactly do you have this setup? The normal setup would be cable modem connecting to router. Computers (wired and wireless) connecting to router.
How exactly do you "connect" your desktop or laptop to the internet? What do you do to get a connection?
What you have is two devices connected directly the modem and thus your ISP. Unless the modem is actually a modem/router this won't work if your ISP does not allow more then 1 internet connection at a time.
I suspect this slightly setup is the actual problem. If you use the desktop, the desktop gets the IP address from the ISP. Now the desktop is using internet connection through the modem. Thus, your router cannot connect to the internet nor your laptop.
When your router connects to the internet it gets the IP address from the ISP. Again, the desktop cannot get an IP address anymore because the internet connection is already used.
The normal setup is that the internet port of your router is connected to the modem. The purpose of a router like the WRT is to share a single internet connection among several computers - wired and wireless.
Therefore I would suggest you connect the internet port of the WRT to the modem directly and hook up the desktop to a LAN port of the WRT. You can also connect the switch to a LAN port. Now desktop and laptop share the internet connection established by the WRT.

Does it charge you for GPS connection when using t...

I have an N73, my tomtom software and bluetooth gps reciever are on the way.
Will it charge me for using tomtom by the minuete when usung 02 pay and go or not?
The prices for using the internet on my phone are rediculus so hopefullly not.
I assume when using it for a journey it wont be costing me by the minuete to have my tomotm telling me directions via my phone?
Could anyone answer this question please
Thanks

No it won't cost you anything while you are using TomTom. BUT if you sign up for Traffic which warns you of holdups, accidents etc it will cost about £40 a year payable to TT and any fees payable to 02 for downloading data every quarter of an hour or so. The GPS connection is via Bluetooth so it costs the same as running an earpiece ie nowt! You may well be able to run them at the same time.

Changed from XP to Mac OS X and now wont connect when plugged in?

Hey folks, I have recently bought a MBP, updating from a Windows XP SP3 laptop and tried to plug my iPhone 3GS in today for the first time and a message pops up saying that it cannot connect, error occurred (0xE80006B)
I then updated iTunes to the newest version and the same thing happens, except the error code now is (0xE8000001)
I then tried plugging my Iphone back into the Windows XP machine and it sync'd correctly.
I have also tested an Ipod cassic 80gb in the Mac and it connected perfectly (using the same USB Lead)
Please can anyone shed some light on what may be the cause of this problem?
Thanks so much
James

Bump.
Still having the same issues and running out of ideas now!
JB

WRT610N (no wireless connection when using security key)

My router hooked up hard wired fine. my wireless does not work when I set a security key of any type. It all seems to work fine with the system unlocked and no security set at all. I do have networkmagic 4.9 on my machines and have had for several years. My old wrt54G seem to work fine with a security key. It just got to where I had to reset the router a lot after a couple of years. How do I get this WRT610N ver:2 to work with a security key? I use Windows XP on all 3 computers,,,, 1 hard wired 2 wireless. I have had a WRT54G for a few years ,,,so I know how this stuff works,,,but I can't figure this one out. help please I want it to work right. Thanks,,,,I have a brand new WRT610N Ver:2

First of all, in the WRT610N, give your network a new unique SSID. Do not use "linksys". Do not use your old SSID. If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Next, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Delete any network with your old SSID. Also delete any network that you do not recognize, or that you no longer use. Enter your new network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to the router (it can take up to two minutes). If you still have problems, temporarily turn off your compute software firewall, and try again to connect.
If the above does not fix your problem, download and install the latest driver for your wireless adapter.
Some users have reported improved wireless performance by switching to WPA encryption.
Note:
For WEP, enter WEP "key 1" (found in the router) into your computer, not the WEP password or passphrase.
For WPA or WPA2, enter the key (sometimes called password or passphrase) into your computer.
Win XP requires a patch to run WPA2 (= WPA with AES) . The patch is in SP3, so you will need SP3 to run WPA2.
Message Edited by toomanydonuts on 01-02-2010 12:14 AM

Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

I have a:
new MBPr 15" late 2013 with dedicated graphics card
new airport extreme base station
3rd generation apple tv
iPhone 5s
200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
Strange when you think how Air Video works:
Video file lives on MBP
iPhone connects to laptop
Video plays on iPhone and is sent to Apple TV via Air Mirroring
Rather than:
Video played on laptop
Video sent to Apple TV
Seems bizzare that my iPhone can handle better streaming than my pro laptop.

Printer wont connect when wep password enabled

Hi. I've had a HP Deskjet 5850 for many years. It worked perfectly with my D-Link wifi router, it connected wirelessly with no issues. I recently bought an airport extreme, I've reset everything on the printer and it works via ethernet, but it only works via wifi when airport is set for wireless security is set to none. If I assign a password of any sort it won't connect.
In the printer's admin webpage I've set and reset it for a wep password and it wont connect. Does anyone know if this printer is compatible with airports wep password protection?
Thanks!

I created a WEP password, this is what the printer supports. However, even my MacBook had issues logging in with WEP, it would get bumped off the network and then could only log into the my airport extreme's wireless network after a restart... and then it would get bumped off again. So I switched the airport to WPA/WPA2 password and the macbook works fine now, and the connection is faster than it was with a WEP password. Does the AirPort have known issues with WEP?
Thanks!

If your ipod wont connect when using ipod updater fix here

Similar Messages

Maybe you are looking for