IMAC 24¨ WHAT KIND OF MEMORY I NEED TO UPGRADE MY COMPUTER?

I have an IMAC 24¨ What kind of memory i need to upgrade it? It has actually 667CL5

You posted in the PPC iMac forum, but there was not a 24" PPC iMac.  There are several 24" Intel models.
To tell what memory you need it is best to check the exact model identifier, click the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware and what does it show as the Model Identifier?  With that you can go to either http://www.everymac.com and find the appropriate iMac and see what the correct memory is.  Or, you can go to OWC, http://www.macsales.com or Crucial, http://www.crucial.com and see what they offer for that model iMac.  They are the trusted sources of Mac memory.

Similar Messages

  • What kind of memory do i need to upgrade my mac pro

    i have a mac pro and it has a 2GB memory i want to upgrade it to a 4GB memory but i dont know what kind of memory i need. can someone please help

    http://bestbuy.upgradebase.com/
    Go there and select your model and it should tell you what speed it takes.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • IMac G4 PPC, what kind of memory do I need?

    I've looked everywhere, but I haven't found anything that screams "This is clearly the exact thing you need, doofus".
    I own an iMac G4 PPC.
    Here are the specs:
      Machine Name:          iMac
      Machine Model:          PowerMac6,1
      CPU Type:          PowerPC G4  (3.3)
      Number Of CPUs:          1
      CPU Speed:          1 GHz
      L2 Cache (per CPU):          256 KB
      Memory:          256 MB
      Bus Speed:          133 MHz
      Boot ROM Version:          4.5.9f1
      Serial Number:          W8******NHX
    And if this is important, here:
      System Version:          Mac OS X 10.4.11 (8S165)
      Kernel Version:          Darwin 8.11.0
    And this: (Memory)
    DIMM1/J20:
      Size:          256 MB
      Type:          DDR SDRAM
      Speed:          PC2100U-25330
      Status:          OK
    (The only other slot is "DIMM0/J22", and all it says is "Empty".  I'm just assuming that's the one I'm trying to get memory for.)
    For the past since forever, I've been trying to find some memory I can add to it, because it's showing its age.  I love this computer, and I want to get as much out of it as I can.
    The thing is, I can't seem to find the specific type of memory for it anywhere.  And if I have, I sure don't know if it's the right kind.
    I need the biggest possible memory I can put in the slot on the bottom, the one that apparently goes in the "DIMM0/J22" slot, which is the only one out of two that says "empty".
    I've tried a few sites like Crucial, which have a system scanner to help pinpoint your compatibility, but my system doesn't support that application and refuses to run it.
    What kind of memory goes into the user-accessible slot on my machine?
    Can someone please help me out?  I'm sick and tired of that beach ball.
    <Edited By Host>

    Click here for some; you need a 200-pin SO-DIMM.
    (75711)

  • What Kind of RAM i need for a 20" 2.16ghz iMac (white).........(MA589E/A)

    Hi guys....
    Well i have a 20" 2.16ghz iMac (white) the code is MA589E/A.
    and now i need more RAM so i want to buy some RAM,, i have a few questions...
    1) What's the Maximum ammount for this model?
    2) What kind of RAM i need (please be specific).

    Hi Alvi
    Your Late 2006 iMac supports 3GB of PC2-5300 667MHz ram, see the Memory Specifications in the link below:
    http://docs.info.apple.com/article.html?artnum=304284
    Also here are the Technical Spec's for your iMac:
    http://support.apple.com/specs/imac/iMacLate2006.html
    Dennis

  • HT4167 what kind of charger I need to get for my MacBook black 13?

    What kind of charger i need for my MacBook 13?

    You can get a new third party power adapter on eBay for about $20
    http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313

  • HT3775 How do I know what kind of update I need to play downloaded videos?

    Need to know what kind of update i need to play downloaded vidos

    Try using VLC (just search for it on Google). It's an open source video player that will play most downloadable video files.

  • What kind of security aspects needed in webdynpro application for ABAP?

    Hi Experts,
              What kind of security aspects need to be considered in webdynpro for ABAP application? Do I need to use Autorization check? Where can I use Authorization check in webdynpro for ABAP?
    Please help!
    Thanks
    Gopal

    Hi Gopal,
    you can find the security issues for Web Dynpro ABAP here: http://help.sap.com/saphelp_nw2004s/helpdata/en/af/0489ce55002f44a8c927371bedf719/frameset.htm
    Regards, Heidi

  • I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

    I have the MacBook Pro (retina, 13 inch, Mid 2014) Memoria 8GB 1600 MHz DDR3 and I want to increase the memory. What kind of memory do I have to buy?

    The RAM in the retina model can not be upgraded.

  • I need to know what kind of disk i need for my portege z835-sp3240L

    I have an Portege z835-sp3240L Ultrabook and the SSD disk failed, so i need to replace it. I want to know what kind of disk i need (size, inches, etc) Please, can you give all the info about the disk. I live in Chile, so i can´t take it to a Toshiba repair place.

    Portege Z835-SP3240L
    Downloads here.
    Essentially any capacity SATA disk that fits a laptop should do.
    Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
    If you failed to create recovery media, you can obtain it from Toshiba. Scroll down to Get Recovery Media here. Toshiba in the US will ship to Chile (see this message).
    For instructions, see the section Restoring from recovery media, which begins on p. 65 of the User's Guide.
       Portégé Z830 Series User’s Guide
    If the disk uses advanced-format technology, see my message about that.
    -Jerry

  • What kind of memory do I have

    Hello, I've been trying to figure out what kind of RAM do I have in a computer (because I'm not sure if it's DDR2 or DDR1), so that when I purchase an upgrade, i will be able to use it.
    I tried:
    lspci | grep -i ram
    00:00.0 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a1)
    00:01.2 RAM memory: NVIDIA Corporation MCP55 Memory Controller (rev a2)
    00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
    sudo dmidecode --type 17 :(
    # dmidecode 2.12
    SMBIOS 2.3 present.
    Handle 0x0023, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0022
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 512 MB
    Form Factor: DIMM
    Set: None
    Locator: A0
    Bank Locator: Bank0/1
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x0024, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0022
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 512 MB
    Form Factor: DIMM
    Set: None
    Locator: A1
    Bank Locator: Bank2/3
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x0025, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0022
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: A2
    Bank Locator: Bank4/5
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x0026, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x0022
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: A3
    Bank Locator: Bank6/7
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    As you can see, in the Type subsection there is no information about it.
    Any links related are appreciated.
    Cheers!
    +: Is it true that if 1 RAM is only 400MHz, and another one in the same PC with 800MHz, both only will only use 400MHz?

    alphaniner wrote:
    You could try lshw -short -C memory , dmidecode --type memory (this one gives a bit more info than --type 17), and dmidecode --type 2 (reports mobo model).  But I wouldn't be surprised if these don't give you anything either.
    You may just have to bite the bullet and crack open the case.
    I can open the case, there is no problem with that (though most times it's not specified on the label)
    From your commands I can't figure out what kind it is (though I know it's DDR2)
    [ubunchu@quickie ~]$ lshw -short -C memory
    WARNING: you should run this program as super-user.
    ^CI (sysfs)
    [ubunchu@quickie ~]$ sudo lshw -short -C memory
    H/W path Device Class Description
    ===================================================
    /0/0 memory 128KiB BIOS
    /0/3/a memory 128KiB L1 cache
    /0/3/b memory 512KiB L2 cache
    /0/3c memory 2GiB System Memory
    /0/3c/0 memory DIMM [empty]
    /0/3c/1 memory 1GiB DIMM 533 MHz (1,9 ns)
    /0/3c/2 memory 512MiB DIMM 533 MHz (1,9 ns)
    /0/3c/3 memory 512MiB DIMM 533 MHz (1,9 ns)
    /0/4 memory RAM memory
    /0/1.2 memory RAM memory
    [ubunchu@quickie ~]$ sudo dmidecode --type memory
    # dmidecode 2.12
    SMBIOS 2.4 present.
    Handle 0x0005, DMI type 5, 24 bytes
    Memory Controller Information
    Error Detecting Method: 64-bit ECC
    Error Correcting Capabilities:
    None
    Supported Interleave: One-way Interleave
    Current Interleave: One-way Interleave
    Maximum Memory Module Size: 1024 MB
    Maximum Total Memory Size: 4096 MB
    Supported Speeds:
    70 ns
    60 ns
    50 ns
    Supported Memory Types:
    Standard
    SDRAM
    Memory Module Voltage: 2.9 V
    Associated Memory Slots: 4
    0x0006
    0x0007
    0x0008
    0x0009
    Enabled Error Correcting Capabilities: None
    Handle 0x0006, DMI type 6, 12 bytes
    Memory Module Information
    Socket Designation: DIMM_B1
    Bank Connections: None
    Current Speed: Unknown
    Type: Unknown
    Installed Size: Not Installed
    Enabled Size: Not Installed
    Error Status: OK
    Handle 0x0007, DMI type 6, 12 bytes
    Memory Module Information
    Socket Designation: DIMM_B2
    Bank Connections: 6 7
    Current Speed: 7 ns
    Type: Unknown EDO
    Installed Size: 1024 MB (Double-bank Connection)
    Enabled Size: 1024 MB (Double-bank Connection)
    Error Status: OK
    Handle 0x0008, DMI type 6, 12 bytes
    Memory Module Information
    Socket Designation: DIMM_A1
    Bank Connections: 0
    Current Speed: 7 ns
    Type: Unknown EDO
    Installed Size: 512 MB (Single-bank Connection)
    Enabled Size: 512 MB (Single-bank Connection)
    Error Status: OK
    Handle 0x0009, DMI type 6, 12 bytes
    Memory Module Information
    Socket Designation: DIMM_A2
    Bank Connections: 4
    Current Speed: 7 ns
    Type: Unknown EDO
    Installed Size: 512 MB (Single-bank Connection)
    Enabled Size: 512 MB (Single-bank Connection)
    Error Status: OK
    Handle 0x003C, DMI type 16, 15 bytes
    Physical Memory Array
    Location: System Board Or Motherboard
    Use: System Memory
    Error Correction Type: None
    Maximum Capacity: 4 GB
    Error Information Handle: Not Provided
    Number Of Devices: 4
    Handle 0x003D, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x003C
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: No Module Installed
    Form Factor: DIMM
    Set: None
    Locator: DIMM_B1
    Bank Locator: Bank0/1
    Type: Unknown
    Type Detail: None
    Speed: Unknown
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x003E, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x003C
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 1024 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_B2
    Bank Locator: Bank2/3
    Type: Unknown
    Type Detail: None
    Speed: 533 MHz
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x003F, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x003C
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 512 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_A1
    Bank Locator: Bank4/5
    Type: Unknown
    Type Detail: None
    Speed: 533 MHz
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Handle 0x0040, DMI type 17, 27 bytes
    Memory Device
    Array Handle: 0x003C
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 512 MB
    Form Factor: DIMM
    Set: None
    Locator: DIMM_A2
    Bank Locator: Bank6/7
    Type: Unknown
    Type Detail: None
    Speed: 533 MHz
    Manufacturer: None
    Serial Number: None
    Asset Tag: None
    Part Number: None
    Though if I see there is no easy bypass, I shall check up on the manufacturer's info.
    Thanks so far. Cheers!

  • What kind of memory cards fit on the sdxc card slot of the late 2012 macbook pro

    trying to find out what kind of memory card fit on the card SDXC card slot of the late 2012 MacBook Pro.

    All SD cards ever made to date.

  • What kind of document i need for register  iOS Developer Enterprise Program ?

    What kind of document i need for register  iOS Developer Enterprise Program ?

    Wond,
    I have full access(SAP_ALL) on BI. What kind of Authorization on R/3 system to extract the data?
    Thanks,

  • Hi! a member said to get  MPEG Streamclip to see what kind of codec i need

    well,could anyone tell me how to have this program let me know what kind of codec i need?

    I meant within the program, not when trying to open the file. You need to convert it to be able to play in QT
    Here is a screenshot to give you an idea, MPEG Streamclip is reliant on codecs and that will determine what you can convert to. If something is missing than that is a codec you need.

  • What kind of cert is needed for Client to MP/DP communication.

    Hi, 
    What kind of Certificate is needed for Client to DP/MP communication?   I know what the documentation says about setting up a Client cert and setting up auto enroll however, we are not able to setup auto enroll in a couple domains so we are trying
    to figure out how to get certs on these other machines.
    Will any cert listed in the personal store of the Client and the MP/DP work? 
    How does Config Manager pick the cert it needs to use for this on the CLient side and MP side?
    Thanks in advance.
    Thanks Lance

    We manually created a cert for a machine using the Config Manager Client template.   THis was the same template used to create the config manager client cert that we installed on the site system.
    So both the Config Manager server and Client have a cert created with this template (and therefore show the same template id).
    The client and config manager server have root certificate in the trusted root store from the same CA.
    in our ccmmessaging.log file on the client we get the following error.
    Certificate [Thumbprint ksdjfskfjdsfksjfskdfjskdjfskjfskdjfklsjdfslkfjdslkf] issued to 'machinename' doesn't have private key or caller doesn't have access to private key.
    in the certificates MMC it shows for the certificate with the above thumbprint..
    you have a private key that corresponds to this certificate.
    What are we missing?
    Thanks Lance

  • What Kind of microcontroller is needed for alarm system with PIR sensors

    Hi ! I'm student at Technical University Varna , 
    Bulgaria . I'm interessted to create my own alarm system with Labview,
    but I'm not sure what kind of controller i need and what kind of PIR
    sensors.                  Thank You

    Hi xellos,
    I'm not sure what you need, but if my feelings is right, than what you  want to do is sort of motion detector based on PIR sensor and some ucontroller. It this is what you need, than once again, such a question is rather suitable for other discussion forums, like LabVIEW Embedded.
    However, in general you can go for ARM or Blackfin when thinking about embedded platform. See following links to get more ingormation on ARM and Blackfin with LabVIEW:
    NI LabVIEW Embedded Module for ARM Microcontrollers
    NI LabVIEW Embedded Module for ADI Blackfin Processors Development Kit
    With choosing sensor, I suggest simple googling - with relativly little effort you can find many sensors. And you can pick on specification and requirements you have (just to note, National Instruments is not producing and usualy not selling sensors).
    Regards,
    Stefo

Maybe you are looking for

  • Shared Review of Forms

    I briefly searched for this topic with no hits. I created a form from a word document and added one dynamic control: a button to clear all the form fields.  The remainder of the form is composed of text fields and checkboxes. I am using Acrobat 9 Pro

  • Can I export the pages of a book created in Aperture

    I would lioke to export the pages of a book created in Aperture so I can import them to get the book published. Is it possible to export hte pages as jpg images? When I save it as a pdf, the whole book is one file.

  • Weblogic 10 ear problem-urgent

    hi i have ear file, deployed on weblogic 10. here is the folder structure: ear- ---> META-INF-->application.xml ---->shared-----> it contains 12 jar files utility jar files needed by wars and ejbs. ----->3 war files ------>3 ejbs. application.xml fil

  • Edge 420 does not load operating system (Windows 7)

    My edge 420 suddenly stopped working yesterday. When I turn it on, it shows me option if I want to restore or use the normal set up, and neither of the options owrk, it just freezes no matter what key I press, F11 for recovery or Esq for normal set u

  • Urgent : scheduling in Routing

    Hi all , I am using Grouping of work center that is in capacity header No od Ind capacity : 6 , start and finish time of the work center is : 07:00:00 to 07:00:00 so the capacity available in the Hour is : 24 x 6 = 144 hr In the Routing : Required sp