Image Resolution issues?

Shot RAW images with Nikon D300; opened images in camera RAW (they are all 300 DPI); opened all images in Photoshop CS5 and the image size for all is 300 DPI saved as jpegs; I sent the images to a friend; when she opens in them in Photoshop CS6 they are 240 DPI - any assistance is greatly appreciated!

That's easy to change. Camera Raw gives you full control.
Try this: Get the Camera Raw dialog open (e.g., open one your D300 images), then click this link at the bottom-center of the dialog:
That will provide you the ability to change the ppi setting that the images open at:
-Noel

Similar Messages

Creating MP4 Videos from Images - Resolution Issue

Currently I am using the Media Foundation SDK to convert Images to a H.264 video using the following example from Microsoft.
https://msdn.microsoft.com/en-us/library/windows/desktop/ff819477(v=vs.85).aspx
I have encountered an Issue when adjusting the MF_MT_FRAME_SIZE of the media type object used for input, it would seem that if the resolution is higher then monitor the computer is connected to the call to SetInputMediaType for the IMFSinkWriter object
returns an HRESULT error code 0xc00d36b4. The only differences in my code from the example is the following constants defined at the top.
const UINT32 VIDEO_WIDTH = 2048;
const UINT32 VIDEO_HEIGHT = 1088;
const GUID VIDEO_ENCODING_FORMAT = MFVideoFormat_H264;
Any help in the matter would be appreciated.

@Loki_
What if you use the preloaded file commander?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Image Resolution in Crystal Report

I am facing problem in image resolution when resizing big picture in crystal report.
Please help.

Thanks for your reply
The issue is the pictures (e.g. employee photos) are saved in Database as BLOB data type.
The report is loading employee photo into the report (e.g. employee card), but the loaded picture is coming up with much less quality than the original.

Continuous tone image resolution lower than specified

The following message was posted in the incorrect forum; no legitimate solution to the problem was ever posted. I am re-posting it, as this is the same exact problem I am having, right down to the OS and version of Acrobat. Could someone please explain to me what this means and whether or not I should be concerned about it? I will also get two different kinds of results... one is a single number effective ppi on this error, such as 199, (which results in 200ppi if run through PitStop), and a two-number effective ppi, which we haven't been able to decipher, such as 501.357/179.55ppi (which should be a hi-resolution image).
Help?
Amy Carolyn Watson
>
>
>Nikola Viereckel - 09:45pm Dec 9, 2007 Pacific
>
>Hi - I have recently discovered the above error message when I
>check my distilled press quality pdf in preflight. I am using
>a PC and Version 7.0 of distiller and acrobat. The images are
>300dpi and are in my documents at 100% or lower, so there should
>be no resolution issues. The pdf itself looks fine, but the
>preflight does not. I find if I export out of InDesign (CS2)
>then I do not get the same error message, but this is not my
>preferred way to create pdfs for print.
>
>Any ideas? I the only thoughts I have had is to reinstall
>the program. Thanking you in advance for your help.
>Cheers
>Nikola

> All text should export as vector, since it's all on a layer above any kind of image.
Is there any transparency in the text, though? If you float text over
an image with transparency, it MUST be exported as an image. If it is
floated over vector art with transparency, it MIGHT.
It's easy to assume that just because something is on top, it doesn't
ever need to be flattened. This is not in fact true.
>
>I am a little concerned: is this a flaw in the Acrobat Program?
You mean in its preflight? Unlikely, it isn't rocket science to
calculate ppi, so the numbers are probably right.
>
>Where is this "Continuous tone image resolution" turned on/off? Why is it important?
That's probably a reference to Distiller settings. I think we've
established that you aren't using Distiller.
>
>Is InDesignCS2 flattening to low transparency settings, even though my settings dictate high?
You'd probably need to ask in the InDesign forum. But bear in mind
that the flattener is free to use lower resolution if it thinks that
is all that is needed for particular effects.
Maybe you could reopen the PDF in Illustrator, and use that to select
the images in the flattened page. Might illuminate what is going on.
Aandi Inston

Finding image resolution in a PDF?

I am currently working to perform some maintenance for an app that formats and resizes documents, usually PDFs. The problem happens when certain files are uploaded with an unusually large image resolution (according to the Preflight Properties, 2222.222/2222.222 pt/in). The documents with this resolution come in with file sizes of 36"x24" and end up formatted to 8.5"x11". This leaves the text and a lot of information unreadable.
I am using Visual Basic with iTextSharp to interact with the PDFs that come in. I'm able to find the width and height in points of the document without issue. Finding the image's width/height pixel count is what is giving me fits.
Is there any way in iTextSharp that I can determine the pixel count for the width/height of a PDF Image, or am I heading down a dead end street here?
Thanks in advance for any help you can provide.

I hate to reply again, but I'm still stuck. I've been through the SDK and documentation and have had no luck finding anything to help solve this problem. I don't really need to extract the image per se, I just need to find the resolution of it. Could you possibly point me in a definitive direction in the SDK/Documentation that I could use? There are a couple examples that deal with Preflight but none dealing with the image in the PDF or its properties.
Thanks in advance.

Wrong image resolution for TIF file

Under OSX 10.6.2, the image resolution using Preview application is wrong for FAX MultiPages TIFF files.
If I open up a file with this resolution:
Image size: 1728 x 1081 pixels
Image DPI: 204 x 98 pixels/inch
Color Model: Gray.
The image always show up all squeezed vertically which tells me the Preview application is not processing the DPI properly. When using the size menu from tools, it assumes the resolution is the same for vertical and horizontal which is wrong.
I'm unable to use the Preview application to read FAX TIFF files with the standard FAX resolution.
How do I open up a trouble ticket with Apple developers to fix this issue? I believe it's a software design issue assuming that all TIFF files use the same resolution for both horizontal and vertical DPI. The Preview application should be able to handle different DPI for horizontal and vertical resolution.
We're a small business and we are running the whole office with Mac Minis and iMac with a Mac Mini Server of course. We love it, but we have this annoying bug which I don't have any way to fix it.
Thank you,
Stephan Monette
Unlimitel Inc.

Here's a sample of the tif file from our fax machine you can download:
http://www.hmnet.net/warp2/fax-standard.tif
Download the file on your desktop and try opening it. You will see the square at the bottom will look like a rectangle. With the right resolution, it should look like a square, not a rectangle.
If I open the file with Windows picture and fax viewer, the resolution is fine and the square looks like a square. But the same file on Windows with Quicktime fails to open and it complains about a corrupted file.
On my MAC, the file opens with Preview, but the resolution is wrong.
Maybe the FAX server is not formatting the TIFF file properly, but we can't fix that since there's no more support for it. But the Windows app is able to open it up with the right resolution. So maybe it's just some code change to do in the Preview app.
Thanks,
Stephan Monette
Unlimitel Inc.

Low image resolution in ipad

I had the new iPad for 3 months now but recently when emailing photos taken with the iPad to friends has been changed from 1936x2592 to 240x320. I couldn't find any settings to change the image resolutions. I am not sure why the resolution is being compress while emailing to people.

Thanks for your reply
The issue is the pictures (e.g. employee photos) are saved in Database as BLOB data type.
The report is loading employee photo into the report (e.g. employee card), but the loaded picture is coming up with much less quality than the original.

Image Quality issue with script

So I recently wrote a simple script to output an image at a bunch of different resolutions. However, I am running into an image quality issue that I don't run into when I do the same thing manually.
Here is an example image showcasing the image: http://terminalvelocity.ca/temp/notworking.jpg
As you can see along the top of the model's forhead there is destinct color fragmentation. Which seems very strange.
Here is the script, it is pretty simple, it asks for a few simple config options. (the above image was created using default settings). It then figures out the correct ratios and loops through doing each resize, saving the image, then reverting the history so each iteration uses the original image data and not the resized version:
doc = app.activeDocument;
openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800));
minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
gap = Number(prompt("How much smaller should each image be? (pixels)", 100));
quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10));
var size;
var primary;
var secondary;
if(doc.width > doc.height){
          primary = doc.width;
          secondary = doc.height;
}else{
          primary = doc.height;
          secondary = doc.width;
var ratio = secondary/primary;
var size = [];
for(var i = maxSize;i>minSize;i-=gap){
          var p = i
          var s = i * ratio;
          size.push([p,s]);
var w;
var h;
var n;
for(var i in size){
          if(doc.width > doc.height){
                    w = n = size[i][0];
                    h = size[i][1];
          }else{
                    w = size[i][1];
                    n= h = size[i][0];
          if(doc.width >= w && doc.height >= h){
                    doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                    jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                    jpgSaveOptions = new JPEGSaveOptions()
                    jpgSaveOptions.embedColorProfile = false
                    jpgSaveOptions.formatOptions =
                    FormatOptions.STANDARDBASELINE
                    jpgSaveOptions.matte = MatteType.NONE
                    jpgSaveOptions.quality = quality
                    app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);
                    doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
In comparison, here is an example of an image of the exact same resolution that does not exhibit this issue at all:
The steps taken to save this image were as follows: http://photography.terminalvelocity.ca/content/images/2012/avery_konrad_6/horizontal/1500. jpg
Image > Resize > Bicubic Sharper (1500px);
Save For Web
     Jpeg
     Quality 75
     Optimzed: true
     Progressive: false
     Blur: 0
     Convert to sRGB: true
Anyway, as you can see, The manually exported image does not have any of the quality issues that are present within the scripted image. I am pretty new to photoshop scriping so am assuming it has something to do with me missing some sort of option in the save settings. Any help would be swell.
Also note, this doesn't occur on all images, I usually don't see an issue when using the script, however, something about the tones of this particular photo make it really obvious.
I am using the latest version of Photoshop CS6 (creative cloud) on Max OSX
thanks so much!

I'm on windows find the bicubicsharper does not work well it the image being resized has been highly sharpened all ready. Because of my Photoshop preferences I had to make minor modification to your script. I'm also a bit colorblind so i don't see many color issues so I include a screen capture if what windows does with your image and script.
var orig_ruler_units = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;          // Set the ruler units to PIXELS
doc = app.activeDocument;
openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800));
minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
gap = Number(prompt("How much smaller should each image be? (pixels)", 100));
quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10));
var size;
var primary;
var secondary;
if(doc.width > doc.height){
          primary = doc.width;
          secondary = doc.height;
}else{
          primary = doc.height;
          secondary = doc.width;
var ratio = secondary/primary;
var size = [];
for(var i = maxSize;i>minSize;i-=gap){
          var p = i
          var s = i * ratio;
          size.push([p,s]);
var w;
var h;
var n;
for(var i in size){
          if(doc.width > doc.height){
                    w = n = size[i][0];
                    h = size[i][1];
          }else{
                    w = size[i][1];
                    n= h = size[i][0];
          if(doc.width.value >= w && doc.height.value >= h){
                    doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                    jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                    jpgSaveOptions = new JPEGSaveOptions()
                    jpgSaveOptions.embedColorProfile = false
                    jpgSaveOptions.formatOptions =
                    FormatOptions.STANDARDBASELINE
                    jpgSaveOptions.matte = MatteType.NONE
                    jpgSaveOptions.quality = quality
                    app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);
                    doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
app.preferences.rulerUnits = orig_ruler_units;          // Reset units to original settings

Merge to HDR Pro from Lightroom changing image resolution

Image resolution in PS from a RAW LR transfer is 300ppi but I notice today the final HDR image from a LR transfer of three files is 240ppi. My preference in PS is set to 300ppi and I don't find a way to set a HDR resolution preference. I want my final HDR image to be 300ppi - how do I get this?

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Have you tried both reducing and increasing the Memory Usage in the Performance Prefences?
I tried to work on the exposition of the three photos, but that didn't work.
What does this mean?
Are you using actual bracketed shots?

Serious resolution issues with After Effects CC (2014) on Windows 8.1 Pro on Dell Precision M3800 laptop??

My new company installed Adobe Creative Cloud (There was some annoying Proxy issues at first, because of the seriously tight I.T policies) but we are having some serious resolution issues with After Effects CC 2014 (also have this resolution problem with Adobe Premiere, Media Encoder, Muse) on Windows 8.1 Pro on a Dell Precision M3800 laptop with icons and interface looking too small and hard to see, is there a fix, an update or a work around, can anyone help?
Any help will be appreciated!
k.regards
Ramon

Hi Todd is there a time-frame for this fix, there is a lot of pressure on me, because I convinced my company to get the Creative Cloud and quite a lot of the CC software is not compatible with the latest Windows 8.1 OS.
Is there at least a work around, until this big fix comes along?
k.regards
Ramon

How do I change the image resolution of a photo?

Hi..,
     I am the beginner in Photoshop.
     I want to change one image resolution from 72 dpi to 300 dpi.
     So, I search and got one pdf for change the resolution of the image. In that they mention, take the "Printscreen" of the image and paste in the photoshop and change the mode(Index - flatten) and change resolution via the "Image -> image size -> Resolution".
     Like that i did, it changed correctly.
     After that I Open one already saved image file in Photoshop and do that same steps but the resolution was not changed.
So, now how to change that saved image resolution to 300 dpi...??
Regards.,
VISWA

Viswa,
To find the current resolution of your image, follow these steps:
With your image open in Photoshop, Image > Image Size (Like you've already done earlier).
Check the resolution as shown above. If it doesn't show 300, enter 300, hit OK and 'Save' your image.
Open the file and check again. If it still shows 72, post back with more details of the type of file you're trying to open in Photoshop and if possible, a screenshot so we can help.
-ST

How to find out the image resolution in illustrator?

How to find out the image resolution in illustrator cs through javascript or vbscript?
Thanks,
Prabudass

Anyone please help me, how to find out the embedded image resolution in illustrator file through script.
Thanks,
Prabudass

Overprint Preview, RGB, Image Resolution Acrobat v9

I recently started using Acrobat 9. There is 2 things I'm looking in V9.
1- Overprint Preview
2- All image resolutions in a HiRes pdf. I see a custom check profile called "resolution of color & grayscale images is between..." but I want image resolution is ...
3- Flag any RGB images used.
ThankYou

I'm sorry what I mean if a pdf have 35 images I would to see the image resolution of all of them independently if they are 72 or 600 dpi.

OS X 10.8.3 Display Resolution Issue

Ever since updating to 10.8.3, there has been a sporatic resolution issue when waking my MBP. My mid 2009 13" MBP operates in closed lid mode while connected to a 21.5" monitor. My machine frequently wakes to a completely incorrect resolution that is many times the size of my display. It fixes to the correct resolution if I simply sleep and wake again, or correct it via System Preferences, but having to do this several times becomes quite annoying. Anyone else experiencing this bug and/or have any ideas on its resolution?

Hi GoldenA,
Thanks for visiting Apple Support Communities.
It may help to reset the NVRAM by following the steps in this article:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Best,
Jeremy

Macbook Pro 15" Retina Windows 7 HDMI Resolution issue

Hello,
I have a late 2013 Macbook Pro 15" with Retina display running bootcamp with Windows 7.
I have connected the Macbook to an external HP w2448hc display using HDMI interface.
When booting to OS X 10.9.4, the resolution of the external display is set to 1920x1200 and it looks fine. See picture below:
However, when booting to Windows 7 the resolution on the external display looks lower (although shows up as 1920x1200):
I have another PC which I have connected to the same display with HDMI and the resolution also shows up as 1920x1200. However, in this case the resolution indeed looks as the correct one:
Although not seen very well from the screen shots, both the PC and the Macbook Pro (with Windows 7) show the same resolution in the settings, but the desktop and icons under Macbook Pro (bootcamp) look bigger and with smaller resolution.
Does anyone know how to solve this?

Hi,
I managed to fix this resolution issue by lowering the color depth to 16bit for the external display. Not exactly sure why was this necessary, maybe for some reason Windows cannot allocate enough video memory for both displays?

Image Resolution issues?

Similar Messages

Maybe you are looking for