Immediate TO creation
Dear WM gurus.
We are trying to create immediate TO for a GR for a purchase order.We have maintained the setting of immediate TO creation in config in LE-WM in movement types .
when we do the GR we see that only TR is created and TO is not created.
Kindly help in this regard.
Ram
Hi,
The immediate TO creation setup should be in Interfaces -> Inventory Management -> Define Movement Types -> LE-WM Interface inventory management. The setting in movement type configruation is for automatic TO creation (rather than immediate TO creation).
Beside the configuration setting, certain requirements must also be met for immediate TO creation as well. Please check this link for detail: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83f154afa11d182b90000e829fbfe/content.htm
Also, don't forget to setup mail control for immediate TO creation in case the TO creation is failed you will get a error message sent to your inbox.
Hope it helps
Similar Messages
-
Immediate TO creation and confirmation during MB1B
Hi
In one of our client scenario , we need to create a immediate TO creation and confirmation with respect to PCN created during stock transfer from one storage location to another storage location with in a same plant .
I have done the neccesay setting in Tcode OMLR , but the system is not been able to create the immidiate TO perhaps system doesn't know from which storage type it sohuld select the material.
Can anybody hleps me how to configure this . Do i need to customise storage location control .if yes then what are steps in details ?
Thanks
RAJK
Edited by: RAJ K on May 3, 2010 10:37 PMPlease refer the following thread: -
TO not created from TR
Thanks
Swagat -
Blocking a particular customer for immediate delivery creation
Hi All,
I have the following requirement
Right now whenever the sales orders comes from the customers through EDI, the deliveries were created immediately. This was set up through the sales document. This is being used for the document KE.
Now we need to stop this immediate delivery creation for a particular customer when orders come through EDI.
We can not do this by blocking the customer for deliveries(VD05) because this will block all the sales documents for deliveries. We need this to happen only for KE.
We cannot remove the immediate delivery creation set up from the sales document(KE) because this will affect all the customers(for other customers this should create immediate delivery).
I feel this has to be controlled through a user exit.
In that case what should be the logic used?
What should be checked before blocking the delivery for a particular customer?
Please advise on this.
Thanks in advance for your help.Harini,
I am sure you do not want to take the route of achieving this by u2018Userexitu2019
Here is the alternate solution by simple customizing.
You need to do it in two steps:
Step 1: Define reasons for Blocking the delivery
IMG > Logistics Execution > Shipping > Deliveries > Define Reasons for Blocking in Shipping
Select : Deliveries: Blocking Reasons/Criteria
u2022 Define a blocking reason : say ZZ u2013 delivery Hold.
u2022 Check the Order check box
u2022 Save
Select: Delivery Blocks
u2022 Assign SO to Delivery ( I guess KE to whatever delivery type you have configured)
STEP 2:
Go to Customer Master record for whom you want to block them for normal process:
XD02 > enter customer master in change mode.
Select u2018Extrasu2019 tab in main menu
You see u201C sales and Distribution blocksu201D
Under this click on delivery block ( for All sales areas or desired sales area)
You will find the reason for blocking (ZZ) you created in STEP 1
Assignu2019 ZZu2019 to this customer and save.
Thatu2019s itu2026u2026 !!!!!
When a sales order received with this customer through your EDI, the order will be blocked for delivery.
One need to release the order manually by releasing this block
VA02 > sales tab : remove the block from the delivery block
Hope this helps. -
Difference between Auto TO creation & Immediate TO creation
Dear all,
What is difference betwenn Auto TO creation & Immediate TO creation ?
Please provide your answers..
Regards,
RockyFor any automatic triggering of any evenet/transaction in SAP...one has to schedule a report/program to run in regular intervals....although some these regular intervals will be suggested by SAP...but you/your business can take deceision of scheduling the run.
If you want ur TO to be triggered immediately without aggregating the other TOs and without holding the time frame then go for immediate and on the other side..if you want to trigger after aggregating bunch of TOs within a time frame set by business then go for scheduling the report/program.
Hope this clears...
BR,
Krishna -
Immediate TO creation during posting 261 movement
Hi,
I have done the OMLR setting A for 261 movement. But Immediate TO is not created for production order and maintanance order goods movement[261].Please confirm that any other configuration setting is missing or what are the steps to create immediate TO for 261 movement. Thanks.
Regards,
Sathya MHi ,
GOTO
IMG > Logistics Execution >Warehouse Management>Interfaces>Inventory Management > Define Movement Types >LE-WM Interface to Inventory Management
Here find the entry of combination --- your warehouse no , ref. movement type 261
there you will find a column Immediate To creation , here enter A .
and also special movement indicator as A .
If the entry does not exists create it ( make it specific so that only for your Wahrehouse this settings would be valid)
Regards,
Anupam
Edited by: Anupam Halder on Jul 16, 2009 10:51 AM -
LE-TRM: automatic and immediate TASK creation at TO creation
Hi guys,
Up to know, I succeed in creating TASK either manually in the TRM monitor or by running the report RLTRQSCHEDULER.
I'd like to know how to get the following behavior in SAP LE-TRM (Task and Resource Management) module : automatic and immediate task creation in TRM at TO (transfer order) creation in LE.
Does anyone know how to set this up?
Thx a lot in advance for your valuable inputs.Activate this BADI and set up Request Scheduler program as a background Job.
method IF_EX_LTRM_RQST_GLOBL_SCAN~RQST_GLOBL_SCAN.
TYPE-POOLS: TRMGC.
DATA: lt_where_tab TYPE ltrqt_it_where,
lv_where_line TYPE ltrqt_where.
data: lv_pick(3).
clear: lv_where_line.
lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway, trmgc_rqact_replen, trmgc_rqact_move)'.
append lv_where_line to et_where_tab.
lv_where_line = 'rqact IN (trmgc_rqact_removal, trmgc_rqact_putaway,'.
append lv_where_line to et_where_tab.
clear: lv_where_line.
lv_where_line = 'trmgc_rqact_replen, trmgc_rqact_move)'.
append lv_where_line to et_where_tab.
endmethod. -
Immediate Delivery Creation on Sales Order Save
Hi,
For one my scenario I want delivery to be created immediately after saving the sales order.
For which i have set the immediate delivery'X' in the sales document type. But when i create the sales order, which is confirmed for today, delivery is not immediately created.
Let me know what could be the possible reason for this and is there any other place i need to make additional settings?
ThanksHi there,
I guess that materials will be maintained in separate storage loc to process immediate delivery scenarios in your company sothat item is confirmed for today.
When immediate delivery is not happening, thenit means that the system is not calling the delivery creation prog immediately after order save.
So in sales order prog MV45AFZZ put a code that if the order has to create immediate delivery (like rush orders SO, cash sale BV), system should check if the material is confirmed for today. If yes, it should call delivery creation prog SAPMV50A
Regards,
Sivanand -
Immediate TO Creation-SAP WM -
Hi gurus
Can pls help me
There are two items in a GR ,for one item if there is enough bin space to accomodate and for another item there is no enough space then will the system creates Immediate TO for the 1st item and Manula putaway TR for the second item alone,is it possible ,how to do it ,is that we need to use user exist .
thanks in advance
kumarHi,
It depends on your settings in movement type customising,
Logistics Execution -> Warehouse Management -> Activities ->
Transfers -> Define Movement Types.
field V_T333-AUTTA <<<<
Check also following notes. They will be on your interest.
566090 - FAQ for immediate transfer order creation
388909 - From the movement type in IM to the movement type in WM
87194 - Direct transfer order generation
44160 - Direct transfer order generation from IM
I hope it helps.
Regards, David -
Automatic creation of transfer orders from goods receipt of purchase order.
Hi experts
The project i am currently working on requires the following;
When goods receipting a purchase order i have a requirement for the system to create automatic transfer orders to put the stock away into storage bins. I am aware that the stock goes straight into the 902 area once goods receipted. Is it possible to have the transfer orders created automatically out of 902 once the goods receipt has been posted.
In support of this, i have made an entry in transaction OMKX for the following;
Reference Movement Type - 101
Movement Indicator - B (goods movement for purchase order)
Movement Type - 101
TR Create Transfer requirement - X
Immed. TO Creation - A
Addl Data - X
Once i receipt the PO it just sits in 902 and does not create any automatic transfer orders.
Could someone please help me
Thanks
SimonPlease try to process the material document of the GR manually by LT06 in foreground to find out the root cause of the error.
You may also want to setup the mail control (V_T321-MAILK) for immediate TO creation in OMKX. The system will send you a express message (depending on your setup) if TO creation is failed. -
What configuration is need for TO creation and confirmation automatically
Hi experts,
our business hope TO can be created and confirmed automatically in backgroup based on TR when GR, GI, how to configure it? Thank you.
Current system configuration:
1. every material have a fixed bin in master data.
2. Putaway strategy is fixed bin.
3. Pickup strategy is FIFO.Hi Greetings
TO can be created and confirmed automatically
Immediate TO creation
OMLR --> Mark the field Indicator: Create transfer order immediately with A-Start transfer order creation in the background
for the Warehouse number and reference Movement type combination.
Immediate TO confirmation
SPRO --> Logistics Execution > Warehouse Management> Activities> Transfers> Define Movement Types --> In the details screen tick "TO item can be confirmed immediatly" check box.
Gobinathan G -
Automatic TO Creation and Confirm for the 321 Mvt type
Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
KrishnaHello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM -
Automatic TO Creation for Inbound Deliveries
I would like to have TO created automatically for Inbound delivery for PO.
1) I have set the Automatic TO = A in Mvmt Type 101 for my warehouse in transaction OMKZ.
2) I have set Immediate TO Creation and Mail Control = A for Mvmt Type 101, Mvmt Indicator =B, Mvmt Type 101, TR Create =X for my warehouse in transaction OMKX
3) I have assigned Routine #32 to Application E1 in transaction VOFM
4) I have created output conditon WMTA for delivery type EL with Medium =8 and Date/Time =4.
Tranfer order is not created when the delivery is created via transaction VL34. The output determination analysis indicates that WMTA was ignored because requirement 032 not fulfilled. What am I missing?
Thank you.Hi Julie Simonds
I believe you are working with Inbound delivery with Item catagory as ELN.
Please check if Relevant for putaway is checked.
Path for your refernce :
SPRO > LE > Shipping > Deliveries > Define Item catagory for deliveries.
Thanks,
Mahesh -
Skip the Creation of Maintenance Notification
I would like to know the effect if i will skip or remove the process of creation of Maintenance notification in SAP PM. The process will start with the creation of Order, if there's an external service required the Maintenance Order will be converted into PO if no external service or material will close the Order.
Since the Creation of Maintenance Order will generate Notification, we were thinking that creation of Notification is redundant if the system allows to create order and notification in one transaction.
What would be the effect of this, thanks and God bless.Greetings Peach,
As the experts, who had already answered observed, this is purely a business process consideration. If your (Client's) organization supports a "streamlined" process in which direct Order creation is beneficial you can go for it.
As you've written "Since the Creation of Maintenance Order will generate Notification, we were thinking that creation of Notification is redundant if the system allows to create order and notification in one transaction." I assume you are still using Notification and Order integration. But as Yogesh Dhokne mentioned, this is optional as well.
If you choose to create a Notification in the background, you can still register breakdown times for MTTF/MTBF calculations, Catalog Codes for tracking and any additional information once the Orders are created.
But consider this: How is work requested, released for execution and reported? If you only create Orders, you have only Orders to go on. Therefore, you might require more verbose User Status management, and you may find yourself with Orders that are being created unnecessarily and have to be closed, Orders being released prematurely... You have to have a very "flat" process around this immediate Order creation.
On the other hand, consider that having Notifications created prior means a more "deep" process and more overhead, but you can have a step to filter works to be released on the Notification level before Orders are created, if you have more than one Notification for the same work, you can assign it to a single Order, and you have more options when designing roles and authorizations, since you can separate access and business transactions for Notifications and Orders for your Operations and Maintenance users, if necessary.
Please ask further questions if you have any! -
Issue in automatic delivery creation
Hello,
This is to reframe the issue again and give you some more details on
this issue –
As per SAP standard we have configured our salers order for
immediate delivery creation with a default delivery block – XX. Hence
as
per config whenever we create a sales order, it gets created with a
default delivery block – XX which later on users removes manually and
system subsequently as per design creates the delivery document
automatically.
We are facing two issues in case of sales order design –
1. Some time even after removing the delivery block –XX manually,
system do not create the delivery document automatically against those
sales order.
2. Some time if sales order is created with a credit block in
addition to Delivery Block – XX, system doesn’t create automatic
delivery document against those sales orders even after releasing /
removing the credit block as well as Delivery block.
But if you just open those sales orders in VA02 and make any change for
example – Carry out new pricing Or carry out Availability check for any
one item and save the sales order without making any change into it,
system is creating delivery document against that sales order
automatically.
This issue is happening sporadically. There is no specific pattern
where
this issue is happening. This is an inconsistent issue. We could not
replicate this issue in any of our Non-production SAP system.
Whenever we tried to investigate it in debug mode for the sales orders
where this issue has happened, it worked well and created delivery
document automatically.
Requesting you to kindly look into this issue again and help us to fix
it as early as possible.
Thanks and Best Regards,
Pankaj JainHi,
plz confirm if the automatic delivery creation is activated to few sales order types
as it is most frequently used for Cash sales and Rush Orders
more ever Credit check not Applicable for cash and rush sales -
Immediate TO for posting change
Hi,
Is it possible to have immediate TO for posting change?
I have done the following setting in LE-WM Interface to Inventory Management: Assigned the reference movement to WM movement and checked the indicator for Create transfer order immediately -A.
I am able to manually convert the psoting change notice -> TO without any error. The system also works fine in case of Automatic TO. However the system does not create TO's immediately.
I have one more question: During Automatic / Immediate TO creation, how does the system know the affected stock? For ex.
In case of transfer posting using 321, how will the system select the source?
Regards
DeepakHi,
I think the following may apply to your issue.
When you post a material document in IM, and movement types both "with" and "without" automatic transfer order creation exist in that document, the system does not start the automatic transfer order creation program.
Check out this link: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Maybe you are looking for
-
Using a formatted search is there a method to total a column for several row items? Eg Total gross profit for a sales order. Regards Zabe
-
My new Iphone 5s is not working with Cellular Data on Facebook, whatsapp and viber ect.. and Safari is working browsing internet is fine.. but these application has problem to log it shows alway "connecting"' it is all working with WIFI..... Thank
-
Can you use HD and SD clips in the same FCP project? More like ... can I use HD image and use the SD audio format from a Panasonic HVX 200?
-
I Have several questions. I tried to upload photos from my iPhone 4S to I photo. 2 hours later it says it is still uploading. I disconnected my cable from MacBook Pro and iPhone and tried to completely shut die all Apis and computer. The wheel for sh
-
IPhone attached to car stereo (Honda Accord)
Hi, I've had a car cable for my iPhone for several months, and although it doesn't work fantastically, it does work most of the time. I've just upgraded to firmware 2.1 on my iPhone and now it doesn't work except in shuffle mode, or if I play a track