Implementing MSS in EP 6.0 with ECC 6.0 as back end.

hi,
    I am implementing MSS in EP with ECC 6.0. what are the configuration should I have to do in ECC 6.0 to implement MSS. Please provide me details as to what are the steps for configurations.
Thanks & Regards,
Ramesh

Hi Ramesh
Implementation steps for MSS:
1 - Deploy PCUI .sca to your J2EE Engine via SDM
2 - Deploy MSS .sca to your J2EE Engine via SDM
3 - Make sure you have a SLD available, or you can enable the local SLD on your Portal J2EE instance 
via http://localhost:port/sld and login as Administrator or J2EE_ADMIN and run the auto import.
4 - Define your ECC server in the SLD as a new WAS ABAP instance and define all the settings via the Wizard.
5 - Use the WebDynpro explorer to configure the Jco destinations to use the new WAS ABAP instance in your SLD
6 - Define the system definitions as per the MSS documentation for alias SAP_WebDynpro_XSS and
others
7 - Assign Employee role from PCD to your Portal user and assign the relevant profile to your backend user in ECC.
8 - Use transaction pa30 to add a communications infotype entry to map your username to an employee in the hierarchy.
MSS 60.1 config instructions:
https://www2.iviewstudio.com/support_content/_17011/BP_MSS_ERP04_601_EN.pdf
Hope this helps.
Regards
Yoga
PS:Reward points for useful answers

Similar Messages

  • E-commerce with CRM or R/3 back end ?

    hi all,
    we are going to implement E-commerce and create a web shop with a SAP back-end.
    We are in doubt whether to use CRM or R/3 as back-end system. Does anyone have experience with pros and cons ?
    We already use both CRM (4.0) and R/3  today.
    looking forward to hear from you,
    best regards
    Annette

    Hello Annette,
    Please see for yourself the gap list between ISA R/3 and CRM-ISA in these consulting SAP Notes.
    [Note 609722 - Gap list Internet Sales R/3 Edition 3.1|https://service.sap.com/sap/support/notes/609722]
    [Note 638786 - Gap list Internet Sales (R/3 Edition) 4.0|https://service.sap.com/sap/support/notes/638786]
    [Note 897680 - Gap list SAP E-Commerce for mySAP ERP (5.0)|https://service.sap.com/sap/support/notes/897680]
    The notes provide a progression of gaps cleared in the ISA for R/3 (E-Commerce ERP) version.
    While the list gives you a gap of features in the browser UI, you must also make a list of what R/3 Sales can do that CRM Sales cannot do. The CRM-ISA sales process is solely dependent on the CRM Sales process and its limitations. The list is beyond the scope of this thread. Anyway, since you already have CRM and R/3, you know the differences.
    If you are planning to go big on the full features of the E-Commerce application - including self service, marketing, then, plan for CRM-ISA.
    The major investment of effort has to be planned for (1) middleware integration - which you already have and (2) IPC - I am not sure if you already have done work on this piece. If you have done so already, then, you better go for CRM-ISA. Gives you a better user experience.
    If you are looking for low hanging fruits and quick ROI - say B2B scenario, order status, do it with R/3.
    Easwar Ram
    http://www.parxlns.com

  • Enterprise Portal INtegration with ECC 6.0

    Hello Experts
    I have installed ECC 6.0 SR3 and Enterprise POrtal 7.0 Systems. These two servers were installed on Virtual servers using cloud computing. ECC 6.0 I.P is 173.X.XX.164 and EP system was installed on 173.X.XX.169 IP. I need to set up connectivity between these two systems and make EP system as front end and ECC 6.0 as Back-end. HOw can i accomplish this?
    Please advise.
    Thanks in advance.

    Thanks a lot Folks. I was setting up SSO between EP and ECC 6.0. I got stuck while creating JCo RFC Destinations in VIsual Admin Tool.
    Visual Admin Tool--> JCo RFC Provider. UNder Registered Servers i have to give a program ID -, Gateway host Gateway service and Server Count. COUld you please tell me where can i find the values for input.
    Also under Specific Application Server i give my ECC 6.0 Server details. But i get an error message that says..""Error Starting BUndle --See Log for details"" and the logfile indicates the following:
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[C:\usr\sap\EPD\JC00\j2ee\admin\log\.\system\visual_administration.log]/>
    <!PATTERN[visual_administration.log]/>
    <!FORMATTER[com.sap.tc.logging.ListFormatter]/>
    <!ENCODING[UTF8]/>
    <!FILESET[0, 5, 10000000]/>
    <!PREVIOUSFILE[visual_administration.4.log]/>
    <!NEXTFILE[visual_administration.1.log]/>
    <!LOGHEADER[END]/>
    #1.5 #C0000A6DA602000000000000015151AA000496D082671400#1291722191984#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    #1.5 #C0000A6DA602000100000000015151AA000496D090726E28#1291722427625#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#######Thread[Thread-14,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#Plain###Administrator disconnected.#
    #1.5 #C0000A6DA6020000000000004914A947000496D112D72AE8#1291724615250#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    #1.5 #C0000A6DA6020000000000006AD2B64E000496D1C094A160#1291727530140#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    #1.5 #C0000A6DA60200000000000029422384000496D1D21F7D88#1291727824453#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    #1.5 #C0000A6DA60200010000000029422384000496D2218EAE20#1291729157140#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#######Thread[Thread-14,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.tasks.LogoutTask#Plain###Administrator disconnected.#
    #1.5 #C0000A6DA6020000000000003003E9260004971011F61348#1291995183437#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.LoginTask#######Thread[Thread-2,5,main]##0#0#Error#1#/System/Server/VisualAdministrationTool#Plain###Error while trying to login to EPDEV: Cannot authenticate the user.#
    #1.5 #C0000A6DA6020001000000003003E9260004971013685470#1291995207718#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-23,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    #1.5 #C0000A6DA6020000000000007BF524600004975A15D3D2A8#1292313075882#/System/Server/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.ClusterView#######Thread[Thread-12,6,main]##0#0#Info#1#com.sap.engine.services.adminadapter.gui.ClusterView#Plain###Visual Administrator connected.#
    KIndly advise on how to fix the problem.

  • User,Role Sync with back end Error.

    Hello,
    I am connecting a new back end ECC system for an existing RAR system with 2 backend systems.
    I get the following error message. I have configured the Jco to the new system and it tests O.K.
    " Error while executing the Job:Interface Controller does not exist for Component Instance "
    Is it an configuration issue with the RTA at the back end ?
    Thanks
    Vidyar

    Hello ,
    Please check the following steps for the error.                                                                               
    1. Make sure that SLD is up and running.                               
    2. JCO's are properly configured and are successfully pinged and tested.
    3. After verifying the above steps, Restart the J2EE server.                                                                               
    TEST & PING the JCO in Web Dynpro =>Content Administrator =>Maintain JCOs. This JCO has to be the one which you are using for the connector for which you are running the SYNC job.
    Periodically the JCo destinations, as part of the Netweaver framework, sometimes fail.  Recreating them or restarting the system can make them work again.                                                      
    Regards
    -Ranjiv

  • ESS implementation posibility with ECC 6.0 and EP 6.0

    Hi ,
    To implement ESS with ECC 6.0 and EP 6.0
    Any body can suggest for this implementation feasibility and  possibility.
    What are the Business packages has to down load and where can we get those BPs.?
    After importing into EP 6.0 , what are the configurations and settings required to get SAP HR screens/ivews (preview when we create after systems in EP),
    What are the prerequisites and hardware and software requirements for 8000 users (apprx) ?
    Any version upgradations are required for implementing this or
    can we use this ECC 6.0 as backend and EP 6.0
    and please help required for all those things.
    Thanks
    Kumar.

    For ESS/MSS based on ECC 6.0 (ERP 2005), you can download the XSS business packages from     
    service.sap.com/download --> Support patches and packages --> Entry By application Group --> SAP Application Components --> SAP ERP -->      
    SAP ERP 2005 --> Entry By Component --> SAP XSS --> (SAP ESS 600, SAP MSS 600 and SAP PCUI_GP 600).     
    You can use JSPM to apply these business packages on to the portal. To use JSPM, you have to login to the portal server using <SID>adm to be able to use the JSPM tool.     
    Business Packages and components in it: you BP consists of the 2 following parts
    1) BP_ERP5ESS / BP_ERP5MSS is Portal Business package which consist of iview, pages and roles.. while SAP_ESS / SAP_MSS. is WebDynpro part of it.           
    These iviews will direct to some WD application which are part of SAP_ESS / SAP_MSS. and they are deployed on server.          
    2) you have to simple go to          
    service.sap.com/downloadSupport patches and packagesEntry By application GroupSAP Application ComponentsSAP ERPSAP ERP 2004/2005--Entry By ComponentSAP XSS          
    pick the correct version and download. You get full package not incremental. Old ones will be overwritten when you deploy them. try to download them again if it failed first time.          
    3) Refer note 761266 for package compatibility.

  • Compatability of ESS/MSS ERP 2004 with ECC 6.0

    Hi,
    I was using ERP 2004 ESS/MSS on EP 7.0 SP 8. My backend was ECC 5.0.
    Recently we upgraded our backend to ECC 6.0. But after the upgradation the ESS/MSS packege is not working on the portal. Its showing the below error.
      <b>com.sapportals.portal.prt.core.broker.PortalApplicationNotFoundException: Could not find portal application com.sap.portal.appdesigner.api_framework
        at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
        at com.sapportals.portal.prt.core.broker.PortalApplicationItem.prepare(PortalApplicationItem.java(Compiled Code))
        at com.sapportals.portal.prt.core.broker.ExternalApplicationItem.prepare(ExternalApplicationItem.java:180)
        at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.prepare(SAPJ2EEApplicationItem.java:232)
        at com.sapportals.portal.prt.core.broker.SAPJ2EEApplicationItem.start(SAPJ2EEApplicationItem.java:192)
        ... 8 more</b>
    Is ERP 2004 ESS/MSS comapatbile with ECC 6.0 or there are any steps to be performed after upgradation from ECC 5.0 to ECC 6.0?
    Any suggestions??
    Regards
    Debasish

    The new Business Packages meant for ECC 6.0 are based on Webdynpro for Java ....which have a different and better look and feel ....these are based on a RoadMap(Floor Plan Manager)  which let the employees/managers to go from Overview(dislay the data),edit (to change) ,Review(to review) and Confirmation (To Confirm)....
    Hope it helps.
    Shikhil

  • Adobe form MSS PCR senarios  not working with Portal SSL

    Hi All,
    we have implemented MSS PCR  senarios Nw04 with ERP2004 system.
    every thing is working fine when use http protocal for portal acess.
    Now we try to implement ssl for portal. so started implemnation and done in portal side, after that when try access any senario forms , The adobe form is not opening for editing, its throwing  error
    <b>The initial exception that caused the request to fail, was:
       java.net.ConnectException: Connection refused: connect
        at java.net.PlainSocketImpl.socketConnect(Native Method)
        at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
        at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
        at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
        at java.net.Socket.connect(Socket.java:461)
        ... 47 more</b>
    its very urgent anybody can help out this, what settings ot be done on R/3 server and Portal and ADS server
    Thanks in advance
    Gopal

    Hello Gopal,
    You would only need an https connecion between the browser and the portal server if you are only concerned with the MSS applications. You need to have SSL configured from the portal to ADS server had you implemented some custom scenarios like certification, digital signature etc. But, considering your MSS issue, you do not need to worry about it untill and otherwise your landscape demands you to do so for any security reason.
    Well, you might have already gone through the following link, incase not, please go through the link to find out more on how to confugre SSL on the j2ee engine:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm</a>

  • Implementing MSS

    Hello,
    We are implementing MSS on EP7.0 but when I goto Manager Self Service ...I dont see employees under the manager....we are not using chief positions in the org. structure ...how can I configure this..?
    Also how do i configure various reports in ECC toshow up on the portal...?
    Any help would be highly appreciated.

    Hi Anil.
    MSS - Not using Chief Position
    This might give u some idea.
    Regards,
    Manoj.

  • Reconcile Inventory BI Content Queries with ECC

    Hi Folks,
    I have a question regarding reconciling Inventory Management BI Content reports based on cube 0IC_C03 with ECC.
    We implemented IM in BI, and now try to reconcile the queries with ECC. Specifically, I have one query, 0IC_C03_Q0008 - Stock in Transit.
    We ran the report by Plant, in BI, it only showed one material with #, but people from ECC side use T-Code MB5T in ECC and saw many materials with Stock in Transit for that Plant; and for the material showed on BI report, the # doesn't match between BI and ECC.
    What is the right way to reconcile the report with ECC? is there any other report/Tcode in ECC we can use?
    Any insight ideas would be much appreciated!
    Thanks,
    Freda

    Hi Freda,
    For me, it is the typical nightmare to try to reconcile the cube to your ECC transactions since the cube summarizes and doesn't include your material documents.
    So, to make it a bit easier to match MB5T or MB51, add an ODS with a material document and Material item key and all of the fields and key figures necessary for reconciliation (I usually look at the datasource's delivered fields and add whatever sounds reasonable to look at).  To fill records in this ODS, only fill them from 2LIS_03_BF, because BX and UM do not contain material documents.
    While I was writting this, I think I realize what is happening in your situation.  If memory serves me correctly, MB5T is Cross-Company SIT, which is not part of the 2LIS_03* datasources.  They only account for Intra-Company (Plant-to-Plant within the same company code) SIT.  For that, there is a White Paper you can have an ABAP'er implement for you.
    Here are two good documents you should read and be familiar with:
    How to .... Report on Cross Company Stock in Transit: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92c0aa90-0201-0010-17b1-bf5b11c71257
    How to .... Handle Inventory Management Scenarios in BW: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Also, when comparing my cube data to ECC/R/3, I use transaction MMBE in the ECC to identify stock quantities and stock in transit (SIT).
    Brian

  • New Extractors GL with ECC 6.0

    All,
    Currently we have ECC 5.0 system and we have 0FI_GL_10 extractor providing us the reports based on P&L and Balance Sheet. The major issue with it is that it brings in 51 times the number of records because we have 16 periods and 3 currencies.
    We are planning on upgrading ECC system in near future. We want to have our GL base reports coming out of the new extractors. I have heard that the new extractors make it much better with ECC 6.0. We have our blance sheet and Detailed P&L reports coming out of current extractor.
    Can anyone who has implemented new extractor help on explaining which new extractor can best replace this functionality?
    Thanks in advance.

    Hi,
    Go through the links
    http://help.sap.com/saphelp_nw70/helpdata/en/e2/f16940c3c7bf49e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/29/830e405c538f5ce10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/e6/f16940c3c7bf49e10000000a1550b0/frameset.htm
    Re: New GL cubes 0FIGL_V10, 0FIGL_V11
    Note 1070629 - FAQs: New General Ledger Migration
    Cost Elements:Cost Element ( KSTAR ) should be available in the extract structure ( FAGL_EXTSTRUCT_LEAD ) of 0FI_GL_10.Append the structure to get cost element, activate , uncheck the hidden tab.
    Features of the Extractor
    Extraction method: F1 (function module (complete interface))
    Extractor: FAGL_GET_TT_DATA_LEAD
    Extraction structure: FAGL_EXTSTRUCT_LEAD
    If you include your own fields in the totals table of the new General Ledger using transaction FAGL_GINS, these fields are not included in the extraction automatically. You first have to include them under the same name in an APPEND to extraction structure FAGL_EXTSTRUCT_LEAD. The fields of the APPEND structure are then filled automatically.
    Santosh

  • To implement SAP HCM module in existing SAP ECC 6.0

    Hi,
    I have SAP ECC 6.0 system already implemented 2 years back.
    I am planning to implement SAP HCM with OM, PA, SAP Time management, SAP PAYROLL in existing SAP ECC 6.0 system.
    I have currently 3 system landscape for SAP ECC.
    I would like to know what change/addition is required in above landscape to implement SAP HCM module in existing SAP ECC 6.0
    Do share your view.
    Regards.

    Hi.
    As per you, Already designed Landscape. Why dont you follow you existing Landscape which is alredy proved for other modules.
    Normally Dev/Quality/Production clients will there..
    If more that depends upon flexibility in Each client and defining different business for testing and production interfaces purpose.
    Better use Existing only remaining modules already sucessfully running in Production Right????

  • Error implementing MSS

    Hi,
    I'm trying to implement MSS on EP SP9.
    I just downloaded MSS ZIP file called BPMSS601_18-20001489.ZIP from Portal Content Portofolio. When I try to deploy this ZIP file with SDM, this error appears:
    com.sap.sdm.util.sduread.IllFormattedSduFileException: The information about the development component
    found in the SD file is either missing or incomplete!
    Manifest attributes are missing or have badly formatted value:
    attribute keylocation is missing
    attribute keyname is missing
    attribute keyvendor is missing
    attribute keycounter is missing
    I'm doing somethig wrong?? Anyone knows the right way to install or deploy on EP MSS ZIP file I downloaded. Please I need to do it quickly!
    Thanks in advance,
    Arnau

    Hello,
    I use the Sneak Preview Web AS Java + Portal SP16 and chose the package MSS12_0-10002964.sca.zip (plus the according PCUIGP package). Deployment went fine, so you might consider using this package.
    Regards,
    Sebastian

  • Offline Travel & Expense with ECC 6.0

    Until we implement permanent solution for Travel & Expense, we currently have Offline Travel & Expense (PRWW) that we would like to use with ECC 6.0. We are in the process of upgrading to ECC 6.0 in about 2 weeks. We have got Offline Travel & Expense working but the only issue is running RFCcomm as a service in windows. We are getting errors running RFCcomm as an service.
    Does anybody have any suggestions for running RFCcomm on windows server ?

    Until we implement permanent solution for Travel & Expense, we currently have Offline Travel & Expense (PRWW) that we would like to use with ECC 6.0. We are in the process of upgrading to ECC 6.0 in about 2 weeks. We have got Offline Travel & Expense working but the only issue is running RFCcomm as a service in windows. We are getting errors running RFCcomm as an service.
    Does anybody have any suggestions for running RFCcomm on windows server ?

  • Is it possible to use XSS 2005 on EP7 with ECC 5.0 ?

    Hi all,
    I have an ECC5.0 and I want to upgrade my EP6 to EP7. I'm using XSS 2004 on EP6 and I want to use XSS 2005 on that EP7. I've seen on different notes that it is not possible to use XSS 2005 with ECC 5.0 as a back end.
    Is there any solution to connect XSS 2005 to ECC 5.0 ??? Please I really need a positive answer
    Thanks,

    Hi Joseph,
    I have gone thru same problem in my last project but my situation was little different.
    Actually Business Package of ESS/MSS has two components:
    1. Portal Objects (iView, Roles, Pages etc )
    2. XSS - The Java WebDynpro Code (which in turn contain 3 component SAP_ESS, SAP_MSS, PUSIC_GP)
    Also the prerequisite is that we should have SAP_HR (will give HR functionalities in ECC) and EA_HR (contains RFC, structure required for XSS).
    Now the restriction imposed by SAP is that SAP_HR, EA_HR and XSS should be on same version and patch level. Make sense also. However there are situation where you can deviate from above restriction. (I will explain the same below).
    So what you can do is to install the Portal objects(iView, Roles, Pages etc ) on EP 7.0 (can be installed on EP 6.0 and federated to EP 7.0), install XSS 2004 on EP6.0 (having JAVA 640) and connect the same with ECC 5.0.
    You are looking to install Portal Objects, XSS 2005 on EP 7.0 and connect with ECC 5.0. This is possible but NOT recommended. Actually XSS 2005 WebDynpro will look for enhanced structures, RFC in ECC, which XSS will not find and will throw dumps (sometime java and sometime SAP dumps). You can fix the problem by manually installing the new functionality but believe me it is VERY cumbersome task and will make your system highly unstable.
    What I would advise you is to look into your requirement once again and educate your end client with the problem and take appropriate action accordingly.
    Do let me know if you need any further help.     
    Cheers,
    AB

  • ESS Configuration with ECC 5.0

    Hi
    I am trying to configure ESS with ECC 5.0 as the HR server
    My J2EE system is WAS 7.0 with EP 7.0 and patch level 12.
    I am getting the following error when I am trying to get the ESS pages in EP
    com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcXssMenu.AreaConfig.AreaConfig_Output.Serviceinfo): structure field Helperservice not found
    I was successfull in configuring ESS with ECC 6.0. I did the same configuration for ECC 5.0 also.
    Can anybody help me
    Thanks

    Hi Jeevan,
    Please check your land scape is as per the notes:
    1007341     SAP ERP 2004/2005 - supported ESS/MSS system landscapes
    824757      Dependencies between SAP ERP component lists
    1034385     BP ESS/MSS ERP2004 and ERP2005 on EPNW04s
    1004528     SAP Self Services: Business packages and components
    BR, Abdul

Maybe you are looking for