Import .dxf to ultiboard

I am working with Ultiboard and I see that it has the ability to import
a .dxf file from a CAD program. I have a .dxf file for a componet I
would like to get into ultiboard. When I import it, I can't find it.
Does this import feature allow me to import a footprint or even the 3d
design of the component? Or do I have to manually design each footprint
for each non-generic component I use? If there is a fast way to do this
or a way to import these CAD designs it would greatly save me time.
Please let me know about this ASAP. Thank you.

Hi,
As you mention, DXF file import is a feature you can find in Ultiboard. Lets go point by point here:
1. The reason why you might not see your imported object might have to do with the 'layer' assigned to the DXF file when you imported, that should had been a option to select on the Import Dialog. Lets say, you imported the DXF file to the Silkscreen Top layer, you should have that layer selected for viewing under the Layers Tab of the Design Toolbox. This applies when you are working on the Design Workspace.
2. When you are creating your own custom footprints... you can indeed import DXF files, however, any pads included in your DXF file are not functional, you will need to manually assign  pads to your footprint (for route creation), then you will save this footprint to your user database and use it for your own components, in this way you do not need to create them every time. Once you save the footprint in the database, you can assign it to a component that you would usually use. In the Footprint Edit Mode you will select File >> Import DXF for this action. If this option is not present try Options >>  Customize User Interface in order to find this function and add it to your menu.
3. As for the 3D info, that one I'm not so sure about, I would say no, you cannot import 3D data, based on how a footprint file works, you build the outline, create pads, and then you also configure 3D data, but I'm not sure if you could import it. I don't have a 3D DXF file with me in order to test it, but I doubt it will work.
If you need help on how to create a component's footprint or schematic symbol please consult your User Guide.
I hope this helps.
Nestor
National Instruments

Similar Messages

  • How to remove imported layers from ultiboard general layers property

    I imported several .DXF layers into a project some time ago and now they always appear in the default configuration of  every new project. I have tried unsuccessfully to de-select them and set that to the default, but they always pop up again. How can I remove them when there is no facility for doing so in the properties page?
    Thanks, Tod 
    Solved!
    Go to Solution.

    Hi Tod,
    I think what happened is you imported the DXF layers into a project, then saved the PCB properties as defaults, which then saved the imported DXF layers as defaults. To remove these layers, you need to delete your configuration file, which is where the default settings are stored. This will also reset your user interface and all default settings you have previously stored.
    Just follow the instructions here: http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
    I have also created a defect (D116800) because it should be possible to remove these custom layers without resetting your configuration.
    Message Edited by GarretF on 01-11-2010 08:25 AM
    Garret
    Senior Software Developer
    National Instruments
    Circuit Design Community and Blog
    If someone helped you, let them know. Mark as solved or give a kudo.

  • Scale changes when importing DXF to Ai

    Hi,
    When importing DXF to Ai (V15.1), the scale/size of the object (a gear) is all wrong....
    Is there a way to keep the actual size of the drawing to be identical to the one in the DXF file?
    Thank you in advance.

    In AI, you can change the units in preferences to cm or mm. You create the DXF file in cm or mm units in CAD, and when you OPEN the DXF in AI, you can choose the scale = 1 , units = 1 millimeters or centimeters.  Older versions of AI had scaling problems with DXF that were never resolved, but I think AI 5.1 has resolved that issue.
    Are you having a scaling issue that is unrelated to inches verses mm or cm ?

  • Importing dxf issue

    I'm trying to import a dxf to illustrator cs4. when i do, the scale of the drawing is off. I need it to be correct so that when i send the file to my plotter it cuts out the correct dimension. Do i have a setting wrong? I've read there are issues with this and cs4. Is there a fix?

    Not a program flaw, user error. AI thinks in inch and point, not metric units. You therefore need to define a suitable scaling factor on import or change the unit system in AutoCAD or whatever CAD program you are using.
    Mylenium

  • Text Import Options when Placing a .DXF File

    I am trying to place or even open an AutoCad .DXF file in Illustrator and keep getting a window asking for text import options.  I have read several forums and files about importing .DXF files in Illustrator and it seems that it shouldn't be that hard.  What am I missing?
    Thanks,
    SionnanC

    If you want to, email me one of your sample DXF files, and I will take a look at it. I have a a lot of experience with DXF files.
    [email protected]
    or
    [email protected]
    Ralph

  • How import the file format of CADSTAR into Ultiboard?

     I have some design files of CADSTAR , but I want to import these into Ultiboard,
    please help me!
    *.SCM      CADSTAR SCHEMATIC FILE                     BINARY
    *.CSA       CADSTAR SCHEMATIC FILE                     ASCII
    *.PCB       CADSTAR WORK FILE  (PCB)                   BINARY
    *.CPA       CADSTAR WORK FILE  (PCB)                   ASCII

    I Try to convert these files in CADSTAR 10,but it can't succeed.
    Who can help me to convert them so as to be used in Ultiboard, thanks!
    帖子被Fangel在 04-09-2009 03:46 AM
    时编辑过了
    Attachments:
    CC1100EM.zip ‏82 KB

  • I have the following Ultiboard/Multisim questions:

    I have the following Ultiboard/Multisim questions:
    1. I am trying to create a part footprint and need to place rectangular shaped pins, the only thing I can find are round pins with different shape solder pads. I see where you can place a rectangular hole but this does not have the solder pad around the hole on the top and bottom layers as does the place pin command.
    2. Is it possible to import a DFX file containing pin placement drawing and use it in the creation of a new part footprint?
    3. How can you change the layer of a particular object? For example let's say you have drawn a trace or solder pad on the top solder layer and it really needed to be on the bottom layer. I would think there is a way to simply select the object and changes its layer designation/color to a different one.
    4. I have downloaded Multisim symbol files and Ultiboard footprint files from Analog Devices web site. Where should I place the files? Be nice!!!
    5. The microcontroller MSP 430 simulation model or part in Multisim is a very old model is there a way to obtain the footprint and simulation model/symbol for the newer variant.

    Hi there,
    Here are the answers to your questions.
    I. Placing a rectangular pin (with a rectangular drillhole):
    To change the hole shape that is used for the pin, you must first place the pin.  While creating/editing the footprint,
    From the menu, select Place > Pins
    Click OK (you can customize dimensions later)
    Double-click on the pin and select the Pad tab in the Through Hole Pin Properties dialog
    Under Hole, select Advanced hole
    Select the Hole tab and choose Square/Rectangle.  Click OK.
    Customize the Pad Size
    II. Importing DXF file
    It is certainly possible to import DXF files in Ultiboard (depending on the type of DXF file), but it depends on the program/version that generated the dxf file.
    III. Changing the layer of an object
    Double-click on the object and select the Position tab and you can select the layer to move the object to.
    IV.  Importing Analog Devices files
    The symbols are in .prz format.  To import these files, please see this Knowledge Zone article:
    How to Import and Export Components in Multisim
    To import the footprints, please see this forum thread:
    http://forums.ni.com/ni/board/message?board.id=370&message.id=3536&query.id=139276#M3536
    V. Microcontroller
    The MSP430 in Multisim is still active, but perhaps is a different version that the one you want.  The one is in the database in the one found here: http://focus.ti.com/docs/prod/folders/print/msp430p325.html.  I suggest you post the one you are looking for in the NI Circuit Design Community.  Someone may have the symbol/footprint you are looking for, or may be able to locate it.
    Message Edited by NatashaB on 11-05-2009 10:39 AM
    Natasha Baker
    R&D Engineer
    National Instruments
    Join the NI Circuit Design Community
    Follow Multisim on Twitter!

  • Reduce File size on CAD DXF file opened in AI

    CS3, Windows XP.
    I get DXF CAD files from our Engineering Department. I open them in AI and save them as AI files. Then I place them in InDesign. Then I export a PDF for uploading to my website.
    The problem is that every seam in the CAD drawing is 5 or 6 lines. Every screw head is shown. This makes for a large PDF file. There are several drawings in each manual so the PDF is sometimes over 20 meg. It also takes a while for the image to draw as you go from page to page.
    Is there anyway (short of spending hours removing lines and screwheads in AI) to simplify the drawings from CAD? Does CS4 have any capabilities in this area?
    JAG

    If you have multiple identical (or, more likely, nearly identical) paths overlapping, you can probably eliminate that part of the problem with the export settings in the CAD program (which you don't specify). Look for settings to not include hidden lines (assuming you are exporting from flattend 3D models).
    Most CAD programs have a collection of export options, and there are multiple "flavors" of DXF. Someone needs to know what they're doing on each end of the export/import workflow.
    After getting a reasonable file into AI, try selecting all (excluding Text) and applying the Simplify command with curve accuracy set to 100%.
    Once you get the details ironed out, consider recording an Action to automate the steps that work best. For example, I routinely import DXF files exported from CATIA models and the apply an Action that:
    Selects all text objects.
    Inverts the selection.
    Ungroups.
    Removes compound paths.
    Simplifies paths.
    Applies a uniform stroke weight with rounded end caps and joins.
    Selects all.
    Scales.
    Selects all Text objects.
    Sets font, size, and weight.
    Deselects.
    In a consistent workflow, importing the DXFs and doing most of the optimization (as much as it can be optimized) is pretty much a few clicks affair. Dealing with CAD files when you cannot control the export end (as when receiving them from multiple different vendors and softwares) is always a bit of a chore because of the variables.
    JET

  • Importing AutoCAD (.dwg) files to FM

    I am trying to import .dwg files into .fm files. I don't normally use AutoCAD and don't know how to use it. But, I need to import images drawn in AutoCAD into a frame files. Is this as simple as inserting a picture? Or will the .dwg file need to be converted into something else as a .svg file before it can be imported/compatiable?
    Thank you!
    I really appreciate any insight into this.

    The best luck I've had was importing DXF or CGM files (sometimes one works better than the other) that had been exported from AutoCAD.

  • Create Footprint with custom pad has solder mask issue

    Ultiboard 12 (12.0.653)
    When I create a new footprint with normal pads, everything works fine. When I add a custom pad to the footprint or make the footprint with all custom pads, the solder mask does not work correctly.
    The attached photo of the Footprint edit mode pad 1.jpg shows 16 standard pads along with three custom pads. The solder mask layer is turned on along with the Copper top layer. All pins should be the same light color. The custom pads are purple. (When you first create the footprint they are green instead of purple).
    When a part is placed on the board there is a solder mask shown for all pins like pad2.jpg. If you turn off the solder mask layer the normal pins appear green but the custom pins disappear as shown in pad 3.jpg.
    To get around this problem I edited the part in the data base by turning off the soldermask check box for each custom pad pin, then manually created a mask on the solder mask layer for each custom pin.
    These custom pads are new pads just created and old custom pads known to work in previous ultiboard versions.
    I didn't see any similar messages in the forum. Is this a known issue?
    Michael
    Attachments:
    Pad 1.jpg ‏53 KB
    pad 2.jpg ‏39 KB
    Pad 3.jpg ‏44 KB

    Hi Michael,
    I was able to replicate this problem, Ultiboard doesn't want to place solder mask on the bottom layer and on top solder mask, and you have to play around with the pad settings to turn on the solder mask.  I will let the developers know about this problem. To work around this issue, you can do following:
    1.  Make the solder top or bottom the active layer in the Design Toolbox and then select Place>>Graphics, manually draw the soldermask over your custom pad.
    2.  If your custom pad is an odd shape and you don't want to redraw it, you can create a component with only one custom pad.  Save the component and then place the component on the work area by itself. Next select File>>Export>>DXF, export just the copper top layer.  Now, create your component and before exiting Footprint Edit mode, select File>>Import>>DXF, merge the DXF you generated to the solder mask top and bottom. When you imported the DXF file, there may be several independent objects and you can’t move them together.  In this case, create a window around the DXF data you just imported and then select Edit>>Group Selection to group the DXF data as one object now you can move everything at the same time.  
    Tien P.
    National Instruments

  • How can I select areas inside incomplete shapes?

    Hi,
    I'm often required to open PDF drawings outputted from AutoCAD and add colour to them. I do this by opening the PDF in Illustrator and drawing colour shapes in a layer underneath the CAD drawing. Illustrator is good at handling all of the lines from the PDF, but shapes are never interpreted as connected shapes, they are always broken shapes made up of lines. I find it's faster to re-draw them in a layer underneath than to try to join the broken shapes.
    Ideally it would really speed up my workflow dramatically if Illustrator had an area select feature like Photoshop, for example if I could just click inside the broken shape with the magic wand tool and it would select the area.
    Is it possible that this feature exists in Illustrator and I just haven't found it? Any recommendations would be appreciated.
    G.

    Do this:
    1. Use the shape tools to draw a few ordinary closed paths, overlapping each other partially. .25 pt. stroke, no fill.
    2. Select all the paths. Object>Path>Add Anchor points. Repeat 8 times or so.
    3. Select>Object>DirectionHandles.
    4. Edit>Cut.
    5. Delete.
    6. Edit>PasteInFront.
    Now you have a what looks like enclosed areas, but is really just a bunch of tiny open paths. You've simulated the kind of thing you frequently get from CAD exports.
    7. Select all.
    Now record an Action that performs these steps:
    1. Apply 1 pt black stroke with round endcaps and joins.
    2. Object>Path>OutlineStroke.
    3. Apply the Merge Pathfinder.
    4. Object>CompoundPath>Release.
    Stop recording.
    Everything will look like it just acquired a black fill. But now you have a Group of ordinary closed paths with black fills and no strokes. The outermost closed path completely surrounds the others and is offset from them by 1 pt. (thus, serving as the line work). You can now click the fills of the other paths and apply whatever fill colors you want.
    The Action can now be applied with one click.
    I frequently use a slight elaboration of such an Action when importing DXFs of exploded assembly drawings. I Lasso or marquee-select around the disjointed paths that make up the drawing of an object, and then run the Action with one click. The result is white-filled closed paths, simplified to remove excess anchorPoints, with a heavier weight outline around the outer perimeter. (Helps clarify individual parts in an exploded drawing--not proper thick/thin treatment, but servicable. Also serves for color-coding by the thick outlines if you.)
    The exact best steps to include in the Action depends partially on the nature of the kinds of drawings you typically import; but the principle is generally like that outlined above.
    All of this (including workarounds with LivePaint) is, of course, ridiculous workaround for Illustrator's ridiculous lacking any kind of intelligent join command.
    JET

  • Best way to manage a "project?

    I'm working on a small'ish project that will take about 3 different "circuits" and put them onto one board.
    I'm not designing it into a large master circuit, at least not at the moment, so I want to design each circuit, and link them to a master file of sorts that will also be linked to the PCB file.
    One circuit performs amplification, the other will allow addition of extra devices, and yet another will be the power supply.
    whats the best or most effecient way to have all these linked such that I can run a simulation on them by using the designed power supply WITHOUT putting the power supply in each circuit?
    Basically what I'm asking here is should I be using subcircuits, or should I make this into a "project"
    I really don't know how to use multisim beyond making a circuit and importing it to ultiboard.

    Hi,
    My suggestion would be to use subcircuits as you want everything to be on the same PCB. This will allow you to have all the sections of the circuit seperated while it all being on the same design and thus being able to transfer to the same PCB.
    Hope this helps.
    Regards,
    Tayyab R,
    National Instruments.

  • Is it possible to make a radial keep in/out area?

    The keep in/out tool allows for straight line segments only. Is there a way to place a circle as a keep in/out border? Thank you, Tod

    It is possible at use of import DXF.
    Attachments:
    Keep layer 1.jpg ‏74 KB

  • Converting Autocad .Dwg files to .U3d Files

    Hello,
    I have Adobe Acrobat Professional Version 8 and I am required to pdf 3D models from Autocad 2008.
    The help index explains that you can pdf drawing models with Adobe Professional if the files are in .u3d version 1.0 file format.
    Can any one please advise of free conversion software which will convert Autocad .dwg files to .U3d files?
    Or is there an Acrobat 3D Toolkit plug in which could be used for this purpose?
    Any advice would be most appreciated as I am new to Adobe 3D Modeling.
    Thank you.

    The best luck I've had was importing DXF or CGM files (sometimes one works better than the other) that had been exported from AutoCAD.

  • Architectural Rendering - HELP!

    Can someone please direct me to a source of info for rendering Autocad drawings? I have years of Autocad exp. but only 16 hours of AI coursework.
    My Boss expects architectural renderings now(!) and I need the basic info to get going. Nothing at learning center covered setting up a building to be rendered. I can figure out the rest (hopefully) once I have something on screen to draw.
    Any info is greatly appreciated!!!
    Thank you,
    Scott

    Much better. Some specifics to go on.
    > I have a 2d Autocad (R14) elevation and a floor plan. I can create a side elevation if necessary.
    What is the elevation you already have, if not a side elevation? Are you just saying it's a front elevation?
    > I need to import this into AI and create a perspective to render.
    I assume you want a 2D converging perspective (vanishing point perspective), not a parallel perspective (axonometric), not a true conic perspective generated by 3D construction.
    > Question 1: Can I model this in 3d in AI, or do I need to create the perspective in Autocad (2009) prior to importing?
    Illustrator is a 2D vector drawing program that uses Bezier curves to define its paths. It has a very limited 3D tool (3D Effect) that is mostly intended for simple extrusion and lathing of standalone objects, like "superman" headlines, the occasional blocky graphic object, etc., not for multi-object constructions in the same 3D space.
    For example, AI's 3D Effect can't even take two extruded objects in the same coordinate system and rotate one of them 90 degrees relative to the other. In fact, 3D Effect can't even apply a different extrusion depth to one of the objects in the same orientation. Very very lame for any serious 3D construction. Mere kid stuff comared to any decent 3D modeller.
    3D Effect
    can be put to use in constructing axonometric models, because axonometric effectively puts the "vanishing point" at infinity; so the individual objects can effectively share the same "vanishing point" despite 3D Effect's inability to actually do that in the same 3D space. So you can build an elaborate assembly as individual pieces and just deal with the z-stacking order manually.
    But "arcitectural rendering" usually means an "artists conception" in some kind of vanishing point perspective.
    Other than its 3D Effect feature, then, AI is stricly a 2D drawing program. As such, you can
    construct a traditional 2D vanishing point perspective, just as you would have on-the-board before CAD software was commonplace. But Illustrator doesn't even have any significant dedicated feature to facilitate proper 2D perspective construction. (Adobe FreeHand does.)
    You
    could "cleverly" use 3D Effect to help facilitate that construction. For example, in the case of a house, you could draw the walls of floorplan as closed paths, extrude the whole floorplan vertically to form the walls, and even give that resulting object a converging perspective. But you could not then extrude the roofline in the perpendicular direction in the same overall coordinate system. So you'd have to tediously "eyeball" that.
    But you could use a few such 3D Effect objects as a "starting sketch" to then set up your perspective scheme by effectively tracing the 3D blocks, and then fleshing out the rendering by drawing 2D.
    Probably not the kind of quick turn-around your boss is looking for.
    > Question 2: Once imported, how do I convert the lines into something friendly I can work with?
    The chronic problem with importing CAD drawings into Bezier programs like Illustrator is the nature of most common CAD program export formats. AI can import 2D DXF. But the
    export of the 2D DXF from the CAD program usually converts everything to plotter-language-like pen-up, pen-down straight line segments that are
    visually connected, but
    actually a kazillion individual disconnected paths. Some CAD programs have improved this situation over the years. Depends upon your version of AutoCad. You may be able to flatten your 3D model to a 2D view and then export as EPS, which might result in more properly useful Bezier curves. (I'm not up on all the AutoCAD version specifics; where I work, Engineering uses CATIA.)
    Someone will jump in in a minute and sing the praises of the kid stuff "LivePaint" feature, which essentially can serve as a flood-fill tool to create closed paths within the visually-closed regions of your disjointed imported DXF linework. But from a practical, business-expedient workflow standpoint, you're still going to have alot of hand-drawing and cleanup to do.
    So bottom line points:
    * You're barking up the wrong tree with Illustrator if your boss is expecting a quick rendering solution for 3D models you have constructed a CAD modeller.
    * If you do insist on using Illustrator for this, you would be much better off if you can generate a 3D model perspective in the CAD program, flatten it to a 2D perspective view, and then import that 2D drawing into AI for "colorization" and adding other aesthetic elements.
    * Other mainsteram 2D programs in Illustrator's category are better at this. Corel Designer, for example, expressly embraces technical drawing (AI often actually seems downright contrary to it), and can do the 2D flattening of major CAD file formats on import. I suspect you would be vastly more ahead-of-the-game if you used Designer instead of Illustrator.
    * If your goal is to have most of the actual rendering generated for you, you would be still better off using a 3D modeling program that can import your 3D model
    as a 3D model, and that has its own rendering engine(s), and that lets you then flesh out the model with trees, landscape, sky, etc.
    > Sorry if this is simplistic sounding, but that's where I'm at.
    Sorry if this is disappointing, but that's where Illustrator is at. AI is arguably more a
    graphic design program than (even a 2D)
    illustration program. It has precious few features dedicated to facilitate (even traditional 2D) perspective construction.
    That's certainly not to say you can't use AI for architectural renderings. Many AI users do. But it's mostly a process of drawing a new piece of 2D artwork from scratch, with the imported CAD elevations serving as mostly proportional guides. Overall, it's the electronic equivalent of drawing a 2D rendering on a drafting board with a T-square and triangles. The end result is stylistically 2D (nothing wrong with that). But it's not the kind of quick-turnaround, automated, CAD-model-to-shaded-rendering process it sounds like your boss is anticipating. And doing it will involve a significant learning curve for you, embracing all the object-specific path drawing, coloring, and manipulation tools in the program.
    JET

Maybe you are looking for