Impossible to use mAb with Alcatel phone

Hello
I try to configure mab authentication with alcatel Phone "ipTouch".
The radius is an ISE version 1.2.1
It is impossible to autenticate with mab.
On the Ise the error is:
"Event 5434 Endpoint conducted several failed authentications of the same scenario"
" Failure Reason 11514 Unexpectedly received empty TLS message; treating as a rejection by the client"
On the switch the error message is:
2960-09#
Dec 15 11:13:50.090: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %MAB-5-FAIL: Authentication failed for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (0080.9fc8.a9eb) on
Interface Gi1/0/11 AuditSessionID 0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11
AuditSessionID 0A0A510A0000010A2E95860F
2960-09#
Dec 15 11:13:50.125: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Here is the switch config
+++++++++++++++++
interface GigabitEthernet1/0/11
description HOST PORT WITH AUTHENTICATION
switchport access vlan 68
switchport mode access
switchport nonegotiate
switchport voice vlan 78
authentication event server dead action reinitialize vlan 68
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 300
authentication timer reauthenticate server
authentication timer inactivity server
mab
dot1x pae authenticator
dot1x timeout tx-period 5
spanning-tree portfast
end
global switch config
+++++++++++++++
aaa new-model
aaa authentication login default local group radius
aaa authentication dot1x default group radius
aaa authorization exec default local group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 10.1.30.11 server-key 7 023201575A080B34080F
client 10.1.30.12 server-key 7 122D001B430508116E6A
dot1x system-auth-control
dot1x critical eapol
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 1 tries 3
radius-server host 10.1.30.11 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server host 10.1.30.12 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server deadtime 1
radius-server vsa send accounting
radius-server vsa send authentication
Could you please help me.
Michel Misonne

Hi
Yes the mac is in the Identity endpoint.
During this night, the Phone reboot and now it is OK !!!
I do not know why ?
I changed nothing !
But here is the debug.
Also the ise is configured with authentication protocol Pap-Ascii = Enable
and "Calling stat id" and "Check pass" checked."
The onfig of the phone is
-Mac to login
-MD5 profile = OFF
-Tls Profile OFF
Her is te debug. ( when it works well)
conf t
Enter configuration commands, one per line. End with CNTL/Z.
2960-09(config)#endshutdown int gigabitEthernet 1/0/11
2960-09(config-if)#no shu
2960-09(config-if)#no shutdown
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#end
2960-09#
Dec 16 08:33:54.962: %ILPOWER-7-DETECT: Interface Gi1/0/11: Power Device detected: IEEE PD
Dec 16 08:33:56.157: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/11: Power granted
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
Dec 16 08:33:56.241: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
Dec 16 08:33:56.322: %SYS-5-CONFIG_I: Configured from console by admin on vty0 (10.10.68.4)
2960-09#
Dec 16 08:34:02.924: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:03.924: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
Dec 16 08:34:05.088: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:06.095: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:09.800: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.800: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:09.804: RADIUS/ENCODE(0000025F): acct_session_id: 597
Dec 16 08:34:09.804: RADIUS(0000025F): sending
Dec 16 08:34:09.804: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.804: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:09.804: RADIUS(0000025F): Send Access-Request to 10.1.30.11:1812 id 1645/198,len 249
Dec 16 08:34:09.804: RADIUS: authenticator D3 5F 99 C6 EE 9F 9F 96 - 7C 1B A1 B9 32 1C 78 61
Dec 16 08:34:09.804: RADIUS: User-Name           [1]   14 "00809fc8a9eb"
Dec 16 08:34:09.804: RADIUS: User-Password       [2]   18 *
Dec 16 08:34:09.804: RADIUS: Service-Type        [6]   6   Call Check                [10]
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco       [26] 31
Dec 16 08:34:09.804: RADIUS:   Cisco AVpair       [1]   25 "service-type=Call Check"
Dec 16 08:34:09.804: RADIUS: Framed-IP-Address   [8]   6   10.10.78.250
Dec 16 08:34:09.804: RADIUS: Framed-MTU          [12] 6   1500
Dec 16 08:34:09.804: RADIUS: Called-Station-Id   [30] 19 "F0-9E-63-E7-E1-8B"
Dec 16 08:34:09.804: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:09.804: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.804: RADIUS:   5F 60 06 35 54 F6 CB 60 3A D6 A9 87 92 F0 0D 70           [ _`5T`:p]
Dec 16 08:34:09.804: RADIUS: EAP-Key-Name        [102] 2   *
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco       [26] 49
Dec 16 08:34:09.807: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:09.807: RADIUS: NAS-Port-Type       [61] 6   Ethernet                  [15]
Dec 16 08:34:09.807: RADIUS: NAS-Port            [5]   6   50111
Dec 16 08:34:09.807: RADIUS: NAS-Port-Id         [87] 23 "GigabitEthernet1/0/11"
Dec 16 08:34:09.807: RADIUS: NAS-IP-Address      [4]   6   10.10.81.10
Dec 16 08:34:09.807: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:09.856: RADIUS: Received from id 1645/198 10.1.30.11:1812, Access-Accept, len 283
Dec 16 08:34:09.856: RADIUS: authenticator BC 72 21 F4 37 7D BE B1 - 03 A7 CE F3 3A DB EE DA
Dec 16 08:34:09.856: RADIUS: User-Name           [1]   14 "00809fc8a9eb"
Dec 16 08:34:09.856: RADIUS: State               [24] 40
Dec 16 08:34:09.856: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41 [ReauthSession:0A]
Dec 16 08:34:09.856: RADIUS:   30 41 35 31 30 41 30 30 30 30 30 31 31 45 33 33 [0A510A0000011E33]
Dec 16 08:34:09.856: RADIUS:   32 39 41 45 31 45            [ 29AE1E]
Dec 16 08:34:09.856: RADIUS: Class               [25] 54
Dec 16 08:34:09.856: RADIUS:   43 41 43 53 3A 30 41 30 41 35 31 30 41 30 30 30 [CACS:0A0A510A000]
Dec 16 08:34:09.859: RADIUS:   30 30 31 31 45 33 33 32 39 41 45 31 45 3A 6D 65 [0011E3329AE1E:me]
Dec 16 08:34:09.859: RADIUS:   67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.859: RADIUS:   2F 34 31 30              [ /410]
Dec 16 08:34:09.859: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.859: RADIUS:   51 E9 8C 07 61 A4 F0 02 0C DC DF 1F 25 BE 39 A3              [ Qa?9]
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco       [26] 34
Dec 16 08:34:09.859: RADIUS:   Cisco AVpair       [1]   28 "device-traffic-class=voice"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco       [26] 75
Dec 16 08:34:09.859: RADIUS:   Cisco AVpair       [1]   69 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco       [26] 28
Dec 16 08:34:09.859: RADIUS:   Cisco AVpair       [1]   22 "profile-name=Unknown"
Dec 16 08:34:09.859: RADIUS(0000025F): Received from id 1645/198
Dec 16 08:34:09.859: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
Dec 16 08:34:09.859: %MAB-5-SUCCESS: Authentication successful for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.863: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.894: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Dec 16 08:34:09.894: RADIUS(00000000): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.898: RADIUS(00000000): sending
Dec 16 08:34:09.957: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.957: RADIUS(00000000): Sending a IPv4 Radius Packet
Dec 16 08:34:09.957: RADIUS(00000000): Send Access-Request to 10.1.30.11:1812 id 1645/199,len 147
Dec 16 08:34:09.957: RADIUS: authenticator 1B D7 D2 13 EF 69 36 E2 - 87 4D A9 69 2A F7 29 4D
Dec 16 08:34:09.957: RADIUS: NAS-IP-Address      [4]   6   10.10.81.10
Dec 16 08:34:09.957: RADIUS: User-Name           [1]   41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.957: RADIUS: Vendor, Cisco       [26] 32
Dec 16 08:34:09.957: RADIUS:   Cisco AVpair       [1]   26 "aaa:service=ip_admission"
Dec 16 08:34:09.961: RADIUS: Vendor, Cisco       [26] 30
Dec 16 08:34:09.961: RADIUS:   Cisco AVpair       [1]   24 "aaa:event=acl-download"
Dec 16 08:34:09.961: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.961: RADIUS:   E7 15 BB FB 7B 5B 1A C4 50 FC E7 0E 10 AC 22 36             [ {[P"6]
Dec 16 08:34:09.961: RADIUS(00000000): Started 5 sec timeout
Dec 16 08:34:09.968: RADIUS: Received from id 1645/199 10.1.30.11:1812, Access-Accept, len 209
Dec 16 08:34:09.968: RADIUS: authenticator FA 03 DD C1 D2 87 6B 58 - 99 65 EE 96 FF D5 76 FD
Dec 16 08:34:09.968: RADIUS: User-Name           [1]   41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.968: RADIUS: State               [24] 40
Dec 16 08:34:09.968: RADIUS:   52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]
Dec 16 08:34:09.971: RADIUS:   30 31 31 65 30 62 30 30 30 30 30 30 37 38 35 34 [011e0b0000007854]
Dec 16 08:34:09.971: RADIUS:   38 46 45 45 38 31            [ 8FEE81]
Dec 16 08:34:09.971: RADIUS: Class               [25] 54
Dec 16 08:34:09.971: RADIUS:   43 41 43 53 3A 30 61 30 31 31 65 30 62 30 30 30 [CACS:0a011e0b000]
Dec 16 08:34:09.971: RADIUS:   30 30 30 37 38 35 34 38 46 45 45 38 31 3A 6D 65 [00078548FEE81:me]
Dec 16 08:34:09.971: RADIUS:   67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.971: RADIUS:   2F 34 31 31              [ /411]
Dec 16 08:34:09.971: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.971: RADIUS:   A4 02 84 1E 1A 97 E9 E9 DE 46 93 D6 30 C4 52 99               [ F0R]
Dec 16 08:34:09.971: RADIUS: Vendor, Cisco       [26] 36
Dec 16 08:34:09.971: RADIUS:   Cisco AVpair       [1]   30 "ip:inacl#1=permit ip any any"
Dec 16 08:34:09.971: RADIUS(00000000): Received from id 1645/199
Dec 16 08:34:10.069: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:10.069: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:10.073: RADIUS(0000025F): sending
Dec 16 08:34:10.073: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:10.073: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:10.073: RADIUS(0000025F): Send Accounting-Request to 10.1.30.11:1813 id 1646/240,len 423
Dec 16 08:34:10.073: RADIUS: authenticator 6C 75 45 C7 B7 66 2F 4D - 04 01 C6 CE A5 16 68 9B
Dec 16 08:34:10.073: RADIUS: Acct-Session-Id     [44] 10 "00000255"
Dec 16 08:34:10.073: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 49
Dec 16 08:34:10.073: RADIUS:   Cisco AVpair       [1]   43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:10.073: RADIUS: Framed-IP-Address   [8]   6   10.10.78.250
Dec 16 08:34:10.073: RADIUS: User-Name           [1]   14 "00809fc8a9eb"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 32
Dec 16 08:34:10.073: RADIUS:   Cisco AVpair       [1]   26 "connect-progress=Call Up"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 21
Dec 16 08:34:10.073: RADIUS:   Cisco AVpair       [1]   15 "lldp-tlv=    "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 25
Dec 16 08:34:10.073: RADIUS:   Cisco AVpair       [1]   19 "lldp-tlv=        "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 23
Dec 16 08:34:10.073: RADIUS:   Cisco AVpair       [1]   17 "lldp-tlv=      "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 28
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco       [26] 28
Dec 16 08:34:10.073: RADIUS: Tunnel-Packets-Lost [86] 101 1852075890
Dec 16 08:34:10.076: RADIUS: Nas-Identifier      [32] 32 "
Dec 16 08:34:10"
Dec 16 08:34:10.076: data_left 15
2960-09#
Dec 16 08:34:10.076: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:10.090: RADIUS: Received from id 1646/240 10.1.30.11:1813, Accounting-response, len 20
Dec 16 08:34:10.090: RADIUS: authenticator 91 9F CE 71 1C 4B 45 93 - 49 86 52 C8 C3 44 40 B8
2960-09#
Dec 16 08:34:11.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:12.485: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#sh auth
2960-09#sh authentication ses
2960-09#sh authentication sessions int gi
2960-09#sh authentication sessions int gigabitEthernet 1/ /0/11
            Interface: GigabitEthernet1/0/11
          MAC Address: 0080.9fc8.a9eb
           IP Address: 10.10.78.250
            User-Name: 00809fc8a9eb
               Status: Authz Success
               Domain: VOICE
       Oper host mode: multi-auth
     Oper control dir: both
        Authorized By: Authentication Server
              ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
      Session timeout: N/A
         Idle timeout: N/A
    Common Session ID: 0A0A510A0000011E3329AE1E
      Acct Session ID: 0x00000255
               Handle: 0x3600011F
Runnable methods list:
       Method   State
       mab      Authc Success
       dot1x    Not run
2960-09#

Similar Messages

802.1x with alcatel phone with cisco acs 5.0

Hi All, can any one has done the implementation of 802.1x with alcatel phone where pc will be behind the phone and cisco switch ports are configured as trunk. Trunk native vlan is data vlan for pc and trunk carrying voice vlan.
when trunk mode is enabled I can not configure 802.1x on trunk interface. does any one help me to get rid of this situation..
Thanks

Hi,
Did you find any solution?. Did you tried with the command switchport voice vlan?.
Regards,
Mauricio

2 iPhones in my house, both on the same Apple ID. Just got iPad mini, want to use iMessage with my phone number, but iPad only picks up other more recently added number (not mine) when I go to message settings. Is there a way to default to other number?

Hi guys, so we have 2 iPhones in my house, both on the same Apple ID so that my mum and I can share everything. I have just got an iPad mini, and would like to use iMessage on it with my phone number, but the iPad only picks up other more recently added number (not mine, my mums) when I go to message settings. Is there a way to make the iPad default to other number?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

Impossible to use message With 3G

S'inscrit last update itvs impossible to use i message With 3G the ôther apps nô problème face Time si ok on l'y problème With message and With wifi everything is ok
Tanks for help

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.

Anyone actually use bluetooth with their phone?

So i have recently discovered that the less i deal with my phone directly the better my quality of life should be. I have deleted pretty much all the bs social networking apps from my phone and try my damndst to keep my eyes off of the screen. But the problem lies with my phone - the actual phone part- i get a lot of calls per day for business and well, i hate it. Good for business but bad for my anti phone phase. A buddy of mine got me off of the iOS band wagon and into the android eco system a while back and uses a blueant q2, now i would like to take his word for it and im sure i can, but im intesteed to know what the what the community uses, if any....

Ectophile wrote:
I've got a really basic phone that cost me £16. No Bluetooth, no WiFi, no apps. It's not even got a camera. The number is ex-directory, so the only people who can phone me are the ones I give my number to.
I had similar for years and was happy with it, but I suddenly decided to get a decent smartphone just because it was there. By no means essential but it is handy now and then for info on the fly. £10 a month for a supermarket SIM that provides way more than I need is a reasonable running cost, though if I ever get close to my 5000 texts a month I'll refer myself to a shrink.
You can click the white star next to this message if you think it was helpful.

My dad has an upgrade with his phone number, can I preorder the iPhone 5s with his number and use it with my phone number?

I want to preorder the iPhone 5s. My personal phone number is not eligible for an upgrade yet, but my day's phone number is. He says that I can use his upgrade. On September 20, 2013 when the online preorder begins, am I able to preorder a phone for myself with my dads number and use it with my own number? How does it all work?

Most carriers will allow you to swap phones between numbers without a problem. Swapping will not change the contract on the number that the phone was ordered for. Nor will it affect eligibility for future upgrades. Of course the "swap" will normally need to be done with phones on the same carrier and is probably easier to do when on the same account.
I do this every year, or rather every other year. I am the techie, my wife not so much. So when the new iPhone comes out, I get it for which ever number is eligible for upgrade and have it activated to my number and then activitate my old phone to her number. I usually go to the phone company store (AT&T in my case) as they have new sims on hand and usually need to use at least one.

Using iMessage with my phone number

Hey guys, im trying to imessage my friend in the US from Australia, because texting normally is costing too much. However i couldnt imessage this morning and reset my network settings, now under send and receive its got my @live address and @icloud, but my number is greyed out so I cant select it.
Any advice on how to fix this?
Thanks
Lucas

iOS: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538

Can iphone 4 use facetime with other phone?

Hi,can iphone 4 use facetime or video call with sony ericsson satio?do need to install any software?

yes the above said, yahoo messenger came out with the update, which you can do video calling from your iphone 4/ipod touch 4G to a pc/mac. It can be done through wi-fi or 3G
There is another app called Tango which you can do video chat cross-platformed, meaning, you can make video call with another device that isn't an iphone 4, such as an android phone, they should also have tango, once they download the tango, and if their e-mail is saved in your contact, you will then be able to make video calls. can be done in wi-fi or 3G
*if you have unlimited 3G data, then I wouldn't worry, but if you have a data cap, then not recommeneded as it can eat up your data pretty fast.

Why doesn't my iPad allow me to use iMassage with my phone number anymore?

I used to use FaceTime and iMassage with my cell phone number on my iPad. Now, it only allows me to use my email address. Why the change?
I'm using iOS 6.1.3.

It's best to use an email address.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

How to use massage with other phone numbers

does massage only work with apple products.

Link phone number and Apple ID with FaceTime and iMessage
http://support.apple.com/kb/HT5538

Using Adapter with Cordless Phone

Hi everyone! My family and I are going to live in South America next week and need help deciding whether to buy the Skype Adapter or the Dual phones. If we use the adapter and get an online number, if someone calls our online number, can we answer the call on our cordless phones?
Also, does anyone know if the adapter has to be connected to the computer to make calls?
Thank you!!!

Howdy, I think it's unlikely you'll be able to do what you want. There haven't been any new phone drivers for Palm OS devices issued since the 2005 Phone Link Update, and the Palm OS is essentially dead so there won't be any new drivers written.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Create Sip account in cca and use it with spa phones

Hi,
How can we create sip account on a uc560 ?
Regards,
Sent from Cisco Technical Support Android App

Hi,
Windows Server 2012 has come with the concept of Group Managed Service Account (gMSA).
Following are the benefits of gMSA,
- A single gMSA can be used on multiple hosts.
- A gMSA can be used for scheduled tasks.
- A gMSA can be used for IIS Application Pools, SQL 2012 etc.
Checkout the below link regarding complete information on gMSA (creation and usage),
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/5bc96d1b-0cec-4d0c-a99d-7f34509c0714/how-to-use-correctly-managed-service-account-in-windows-server-2012-?forum=winserverDS
Regards
Gopi
JiJi Technologies

How does one register a non apple phone number so as use ichat and texting with that phone number?, How does one register a non apple phone number so as use ichat and texting with that phone number?

How does one register a non apple phone number so as use ichat with that phone?

Have you tried applying the update by going to Help>Updates within Photoshop Lightroom? The update should be using the same licensing? Did you perhaps customize the installation location? Finally which operating system are you using?

Using Isync with a Motorola U9 phone

I have been looking to buy one of these phones, I live in Mexico and work in the United States, so there are alot of things I need to know and alot of things I want to know before buying a phone. As I expect it to work seamlessly in both countries.
How it will work with my mac is obviously one of my biggest questions. In searching for this answer I have come across many post/questions and several sites from people wondering why they can't use isync with the phone, even though it is listed as a compatible phone. Well as I have discovered over the years, as i need an unlocked phone to work in both countries, service providers lock their phones for several reasons, 1. so when they **** you off you cant go to another company without buying a new phone as well, and 2. so you have to pay extra to get service that your phone has thru them, a good example of this is if your phone has a MP3 players, the company with the slogan "Get it Now", really means you can get in now but only thru them, for money. 3. I'm sure there is at least a 3! So even though you might own that new Brittany CD, you will have to buy every song at (usually) $2.99 or more, if you want to use them as MP3's or ringtones. Some phone that company locks more that 50% of the features so you either have to buy from them, of they are not set up to do the hight tech stuff your phone was. (I'm sure thats more an issue with phones from asia!)
On the second hand you have to pay to have a phone unlocked, wether you buy the stuff to do it yourself, or someone else does it, if it is the latter it can take several days with some phones.
Your best option is to only buy unlocked phones in the future, we need to stop the telecom companies taking advantage of us!
Well i hope this helps someone, i could reply to any specific post.

I found the answer, for those who are interested.
http://forums.cingular.com/cng/board/message?board.id=
motorola&message.id=58274&query.id=312#M58274
I have tried this "hack", and it works like a charm.
Brian
do you think this also would work with 10.3.9/iSync 1.5?

My iMessage will not activate with my phone number when I recieved a new apple ID.

I made a new apple ID because my old one would not let me download any new apps from the app store.
Everything works great with my new appleID EXCEPT it will not let me use imessage with my phone number.
I have tried network resets, turning on/off the restrictions, everything.
Plus... if and when i get iMessage to verify with my phone number.. How do I connect my Macbook, iPad, and iPhone to all sync with my NEW apple ID and get my iMessage working on all three of them with my phone number?

iTunes Store & Mac App Store: About payment card authorization holds

Impossible to use mAb with Alcatel phone

Similar Messages

Maybe you are looking for