In Adobe Forms, Is it Possible to remove File Attachment Link of Navigation

Hi all,
I have devoloped an application for Adobe Form. It is working Properly.
In the Output, I want to REMOVE File Attachment Link in Navigation Pane. Is it Possible to do that?
I know that we can completely hide Navigation Pane, but i need to remove only file attachment.
Thanks in Advance
Malla

Hi Malla,
To my knowledge, this is not possible. You can hide/show the entire toolbar. But not a specific item for security reasons.
Check out the following link
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=7845
Regards,
Mathan

Similar Messages

Interactive Adobe Form Attachments - not possible??

Hi All,
I'm trying to extract attachments from interactive adobe form.
I bound the pdfsource to the form and tried to extract the attachments using pdfclasses.
The attachments are not captured in the pdfsource. SAP Note 1260750 says
"There is no support for attachments to interactive forms up to SAP NetWeaver 70 EhP2."
However I tried the same using offline upload (interactive form) and I could extract the attachments on SAP Netweaver 7.0 Ehp1.
I would like to know -
1) If there is some work around to do the same for Online form too.
2) Is Ehp2 released?
Thank you,
Sri

Hi Subramanyam,
Since i had queries regarding the same requirement that I think you have just achieved, so I could not help but to reply to the same thread and hoping to get some help.
I have developed an offline Interactive form which after getting filled is submitted by mail to save the information at the backend in the SAP system. This is working fine.
But now i need to enhance this form by providing an attachment functionality to the form where the user would be allowed to fill in the form and also attach some documents. I have been able to implement the same absolutely fine but while submitting the form through email, where my form gets attached with the mail in an xml format, I am not able find a way to send the attachment in the attached xml and thus not reaching backend.
Please help me out to find a way to send the attached document by Submitting though mail and thus make it reach the backend system for further processing.
Thanks,
Abhishek Goel.

Merging Smartform Output and Adobe Form Output in a single PDF File

Hi All,
My Requirement is as follows -
I have multiple Smartforms and a single Adobe Form.
I want to merge the Smartform Outputs and Adobe Form output in a single PDF.
I am able to merge multiple Smartform Output in a PDF , but not able to find any way to merge smartform and adobe form output as the Smartform output is in OTF Format and Adobe form output is in PDF Format itself.
I have tried few ways , but could not find any success.
Request you all to give me some direction to this problem.
Thanks & Regards
Bhavika

Kumar,
I am afraid this is not possible using SAP functionality. There are probably 3rd party tools which allow you to merge several PDFs into one, but SAP itself does not offer such a mechanism. There is an internal SAP function, though, which can merge several "parts" (=several PDFs) within an Adobe-created spool request into a single PDF, intended for downloading this PDF from SP01.
This is described in note 1717357.
Best regards,
Alexander

Create adobe form in SFP from a pdf file on disc

Hi all,
How in transaction SFP can we import an existing pdf file on the disc? I did not see any way to do so but I'm sure it's possible.
Is it always relevant and saving development time?
Points awarded for any help
Thanks
Yann

Hi Yann,
Go to Layout tab in SFP transaction and then Tools --> Import. Here select the PDF you want to upload.
Hope it helps.
With Regards,
Manu

Need help with PHP form with checkboxes, radio buttons and file attachment

Hi guys,
I'm having a nightmare with this PHP form where a user can fill it in, attach a doc/pdf and submit. After trying to sort it out with previous code I've used, I've stripped it out and think I should just start again in the hope you geniuses can help!
Here is the HTML of contact.php:
<form action="" method="post" name="contact" id="contact">
    <p>Job Title:*<br />
    <input name="position" type="text" /></p>
    <p>Nationality:*<br />
    <select name="nationality">
      <option value="">-- select one --</option>
      <option value="Afghan">Afghan</option>
      <option value="Albanian">Albanian</option>
      <option value="Algerian">Algerian</option>
      <option value="Zambian">Zambian</option>
      <option value="Zimbabwean">Zimbabwean</option>
    </select>
    </p>
    <p>Which country are you currently living in?*<br />
    <select name="country">
    <option value="">-- select one --</option>
    <option value="United Kingdom">United Kingdom</option>
    <option value="Afghanistan">Afghanistan</option>
    <option value="Africa">Africa</option>
    <option value="Zambia">Zambia</option>
    <option value="Zimbabwe">Zimbabwe</option>
    </select>
    </p>
    <label class="radio" for="checkRight">Yes/No question?</label><br />
    <input class="radio" type="radio" name="right" value="Yes" /> Yes
    <input class="radio" type="radio" name="right" value="No" /> No
    <input class="radio" type="radio" name="right" value="N/A" /> Not applicable
    <p>Yes/No question?<br />
    <select name="continue">
    <option value="">-- select one --</option>
    <option value="Yes">Yes</option>
    <option value="No">No</option>
    </select>
    </p>
    <p>Select your resorts:<br />
    Resort 1<input name="res1" type="checkbox" value="Resort 1" />
    Resort 2<input name="res2" type="checkbox" value="Resort 2" />
    Resort 3<input name="res3" type="checkbox" value="Resort 3" />
    Resort 4<input name="res4" type="checkbox" value="Resort 4" />
    Resort 5<input name="res5" type="checkbox" value="Resort 5" />
    Resort 6<input name="res6" type="checkbox" value="Resort 6" />
    </p>
    <p>Don't send form unless this is checked:* <input type="checkbox" name="parttime" value="Yes" /></p>
    <p>Date of arrival: <input name="arrive" id="datepick" /><br />
    Date of departure: <input name="depart" id="datepick2" /></p>
    <script type="text/javascript" src="assets/scripts/datepickr/datepickr.js"></script>
    <link href="assets/scripts/datepickr/datepickr.css" rel="stylesheet">
    <script type="text/javascript">
    new datepickr('datepick');
    new datepickr('datepick2', {
    </script>
    <p>Name:*<br />
    <input name="name" type="text" /></p>
    <p>E-mail:*<br />
    <input name="email" type="text" /></p>
    <p>Telephone:*<br />
    <input name="telephone" type="text" class="ctextField" /></p>
    <p>Upload CV (Word of PDF formats only):<br />
    <input type="file" name="cv" class="textfield"></p>
    <p><input name="submit" value="Submit Enquiry" class="submitButton" type="submit" /><div style="visibility:hidden; width:1px; height:1px"><input name="url" type="text" size="45" id="url" /></div></p>
</form>
By the way, the date boxes work so excuse the Javascript in there!
To prevent SPAM I've used a trick where there's a hidden URL field which must be left blank for the form to submit which you can see in the PHP.
Below is where I'm at with the PHP which is placed above the header of contact.php...
<?php
if (array_key_exists('submit', $_POST)) {
    $position = $_POST['position'];
    $arrive = $_POST['arrive'];
    $nationality = $_POST['nationality'];
    $parttime = $_POST['parttime'];
    $depart = $_POST['depart'];
    $name = $_POST['name'];
    $email = $_POST['email'];
    $telephone = $_POST['telephone'];
$to = "[email protected]";
$subject = "Recruitment Application";
$message = $headers;
$message .= "Name: " . $_POST["name"] . "\r\n";
$message .= "E-mail: " . $_POST["email"] . "\r\n";
$headers = "MIME-Version: 1.0\r\n";
$headers .= "Content-type: text/html; charset=iso-8859-1\r\n";
$headers .= "Reply-To: " . $_POST["email"] . "\r\n";
$headers .= 'From: My Website <[email protected]>' . "\r\n";
$message= "
$url = stripslashes($_POST["url"]);
if (!empty($url)) {
header( 'Location: http://www.go-away-spam-robots.com' );
exit();
if (!isset($warning)) {
mail($to, $subject, $message, $headers);
header( 'Location: http://www.mywebsite.co.uk/sent.php' );
?>
I would like to make pretty much all the field compulsory so if a field is left empty (other than the hidden URL field), a warning message is displayed next to that field.
Also I would like the file upload field to attach to the email that is sent to me and have the results come through to me in a table format.
Can anyone help me get my form working?
Thank you and I hope to hear from you!
SM

Hi Nancy,
Great stuff, thank you for the reply.
I've managed to get the Formm@iler working and running as I need it to.
The only thing I'm struggling with is when the user clicks submit, they are taken to a page of whatever results the form returned but it is just a white background with Times New Roman text.
How can I have it so the user is taken to the form results in the websites' page layout?
I tried sending them to a generic 'thank you' page by adding the following code but it just took them there whatever the results of the form so that's no good...! I have a feeling it's a bit more complicated than that...
header( 'Location: http://www.nofussbus.co.uk/test/sent.php' );
Thank you for your help!

WD ABAP iview for Adobe Forms showing data of previous PERNR

Hi Experts,
We have developed adobe forms using HCM P&F functionality. We copied standard delivered WD ABAP Iview "Termination" multiple times for the use in developed forms. The Portal IDs are attached to the employee's IT 0105-Subtype 0001 Syname.
We added the parameters in iview:
Application Parameter: GET_PERNR=X&PERNR_MEM_ID=ESS01&Process=ZXXX_XXX_FORM
Problem:
The Portal id is assigned to PERNR in IT 0105 - Subtype 0001 correctly and when we execute the Form Service link is clicked on Portal it shows the correct default data in Adobe form.
But if we remove the Portal id from 1 PERNR and assigned to another PERNR then Adobe Form still shows the data from previous PERNR.
We are unable to figure out the problem as the new Portal id is attached correctly and other WD Java iviews are showing correct data for existing PERNR but only Adobe forms are showing data from old PERNR assignment.
Please advise.
Sunny

Hi Siddharth,
We have already done a number of action to clear the cache such as:
- Set the 2 properties of the iview
a. Cache Level ---> None
b. Cache Validity Period --->-1
- Cleared Portal Run Time Cache
- Clear DB cache
- UME cache (In case you are changing users frequently )- System Administration -> System Configuration -> UME Configuration -> Support -> Invalidate cluster wide cache
- Clear the browser cache --> Most imp - Browser settings -> tools -> Internet Optionsu2026 -> Temporary Internet Files -> Delete Files.
The actions are already done but the problem is still there.
I read some blog on SAP INDX tabel which records the Portal IDs when user logged in and Iview Properties "PERNR_MEM_ID=ESS01" reads this table . I am not sure that if this is the problem.
Please help.
thanks
Sunny

Wed dynpro Screen VS Adobe forms

Hi,
as i understood adobe forms can be used as offline files and later can be uploaded, and also functionality like printing is possible with adobe forms.
what i dont understood is why dont we just use normal webdynpro screens instead of adobe forms
what are the basic differences that force us to use adobe forms rather than normal web dynpro screens
this may seems weird question!!!
your suggestions are invited.
Thanks,
Kranthi.

Hi,
SAP and Adobe have a very strong relationship, both at the business level and the technical level. SAP ship a number of PDF form templates as standard forms for to use, complementing SAP's Smartform and SAPScript offerings. They also ship the Adobe Form designer in both the ABAP and Java development environments. However, *to develop inhouse forms or enhance existing forms customers will need some expertise in LiveCycle and need to pay some additional licensing fees.* The Adobe Forms are very familiar to end-users and offer both online (through Webdynpro) and offline solutions for data entry.
One thing to be aware of is that Adobe Forms are not as tightly integrated to the ABAP runtime as say WD4A and therefore do not offer the richer client functionality, but are very suitable for simple forms and simple requirements.
Another thing,
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms. Many companies must be using this for hard copies / ALE / EDI or to transfer data from SAP to others.
Adobe forms are used to post data into SAP from SAP too. So this has an additional feature compared to smartforms.
Hope you are cleared...
Regards,

Text in ADOBE form not printing while printing the form

Hi All,
I have created an adobe form and am trying to trigger an output linked to the form. The problem is that the output that gets triggered does not show some of the texts which are existing in the form.
So although the values are coming correctly the overall output becomes incorrect as the text goes missing. Let me know if you have any pointers to the issue I am facing.
Cheers,
Sharadendu

Hi Sharadendu,
First of all you need to put this question in Adobe Form related Forums.
Problems can be many in this case.
1: Overflow subform not selected.
2: Some condition failing in the text or subform.
3: Incorrect nesting of subforms.
Mainly your problem will be with the subforms , so you need to croos check all the subforms which you have used to hold data.
Regards,
Sandeep Katoch

Integration of Adobe forms in Enterprise Portal

<i>Manager Self Service:</i>
Say suppose i want to integrate "Change Personnel Area and Sub Area" into Portal:
I can deploy the MSS Business Package in Portal & with the appropriate iviews installed i can access "Change Personnel Area and Sub Area" in Portal.
The above thing works without any issues.
I have ads configured, acf & adobe lifecycle designer installed -- config tests are successfull for some sample webdynpro applications.
<i>
NEW Requirement:</i>
Users want to see the same "Change Personnel Area and Sub Area (ISR_FORM_SPPA, ISR_IF_SPPA) " in Portal as adobe interactive forms.
Can you tell me where i have to start to accomplish the above task?
Any insight on the below stuff would be higly appreciated and rewarded.
1)?backend tcode sfp?
2)?web dynpro java?
3)?business package Enterprise Portals?
Thanks in Advance,
RK.

you can edit anything you like to .
If you want to modify any ESS / MSS Application, you need to have the source code of these XSS DC's as well in your Design Time, else it will give you build errors.
For this you need to have a JDI setup since the MSS and XSS are provided in two different tracks of DTR.
As far as I know because of the used dependency of ESS/MSS Applications, using JDI is the best (and only) option to modify the ESS/MSS WebDynpro Applications.
And then implementing the JDI, helps in version management .The only way to unpack ESS/MSS / PCUI_GP components properly for development is through NWDI. So NWDI is mandatory.
For further information please go through the link:
http://help.sap.com/saphelp_nw04/helpdata/en/b0/ee3441d95dd92be10000000a1550b0/frameset.htm
Since you are interested in adding the adobe forms you need to have adobe server setup and then you can modify the existing webdynpro application to point to adobe forms.
In SDN tutorials tehre is a link for adobe applications, which you can try on your own. This has been asked many times in the forums and you will get the details with a simple search.
Hope this helps!
Regards
Atul Shrivastava
PS: Award points for helpful answer.

JAVA WEBDYNPRO : ADOBE FORMS

Hi Experts,
Im a newbie in WEBDYNPRO, please suggest where can I read on ADOBE Forms for JAVA WebDynpro. I have a to start learning from scratch. Please suggest some good tutorials and PDF's. Please also suggest if I need to have some special packages installed on my WAS.
Regards
Saurabh

Hi Arjun,
Warm Welcome to Web Dynpro World!!!!
For Adobe form I suggest you to go through these Links,
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/47a2be350c4ac8afe36b691203971f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/6fc10c6748479392101e09c9e8d33a/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
For Webdynpro Learning Documents,
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/webcontent/uuid/8921447c-0501-0010-07b4-83bd39ffc7be">Getting Started</a>
<a href="https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro">Webdynpro Java</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">Webdynpro Sample Applications ans Tutorials</a>
https://www.sdn.sap.com/irj/sdn/thread?threadID=139467
https://www.sdn.sap.com/irj/sdn/thread?threadID=200852
Very useful
http://help.sap.com/saphelp_nw04/helpdata/en/5c/1b76bc3da0504e8b535cf3e154eaa7/content.htm
Value help in webdynpro Applications:
Please gothrough these documents,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/391ee590-0201-0010-1c89-f1193a886421
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e038cf90-0201-0010-0a9a-ec69262a1564
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cf40cf90-0201-0010-4a85-e5a207b900d8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2833ce90-0201-0010-f1af-d3cfe1155b16
https://weblogs.sdn.sap.com/pub/wlg/5508
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58a7e390-0201-0010-abb1-8eec7eb7a2ec
webdynpro UI's(pdf)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/Developing%20Web%20Dynpro%20User%20Interfaces.pdf
*Reward Points for useful answers.
Regards,
<b>Ramganesan K</b>

Adobe form doubt???

Iam new to adobe form..i studied all the documents available on adobe form....but still i have some doubts..plz clarify these.....
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
2)when we write driver program for one form ...how could we call that in program?
3)how can we calculate totals in adobe form?
plz help me.....iam waiting for your valuable replies...

We do allow Adobe Forms questions in this forum only if the question pertains to their usage within Web Dynpro ABAP. I don't see anything in your question that fits that description. You seem to have general forms questions and ones that pertain to the usage by print driver programs. I would suggest that your question is really better suited to the Adobe Forms Forum or the ABAP Print Forms Forum.

Need help on adobe form

Iam new to adobe form..i studied all the documents available on adobe form....but still i have some doubts..plz clarify these.....
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
2)when we write driver program for one form ...how could we call that in program?
3)how can we calculate totals in adobe form?
plz help me.....iam waiting for your valuable replies...

Pl. see my answers below...
1)if i want to attach one adobe form to one transaction where can i attach my adobe form?
If ur transaction supports message control technique then u can attach a PDF form and its driver prog. name with an output type from transaction NACE.
2)when we write driver program for one form ...how could we call that in program?
U have to use fms like FP_FUNCTION_MODULE_NAME','FP_JOB_OPEN','FP_JOB_CLOSE'
to call the form.
First get name of the generated function module*
call function 'FP_FUNCTION_MODULE_NAME'
EXPORTING
    i_name     = p_form
IMPORTING
    e_funcname = fm_name.
if sy-subrc <> 0.
message e001(FP_EXAMPLE).
endif.
Set output parameters and open spool job*
fp_outputparams-nodialog = 'X'.    " suppress printer dialog popup*
fp_outputparams-preview = 'X'.    " launch print preview*
call function 'FP_JOB_OPEN'
CHANGING
    ie_outputparams = fp_outputparams
EXCEPTIONS
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    others          = 5.
Set form language and country (->form locale)*
fp_docparams-langu   = Language.
fp_docparams-country = country.
*fp_docparams-langu   = 'E'.
*fp_docparams-country = 'GB'.
currency key dependant summing*
loop at bookings into l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
collect l_sums into t_sums.
endloop.
Now call the generated function module*
call function fm_name
exporting
    /1bcdwb/docparams        = fp_docparams
    customer                 = customer
    bookings                 = bookings
    connections              = connections
    t_sums                   = t_sums
exceptions
    usage_error              = 1
    system_error             = 2
    internal_error           = 3
    others                   = 4.
if sy-subrc <> 0.
call function 'FP_GET_LAST_ADS_ERRSTR'
    IMPORTING
      e_adserrstr = error_string.
if not error_string is initial.
    we received a detailed error description*
    write:/ error_string.
    exit.
else.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
endif.
Close spool job*
call function 'FP_JOB_CLOSE'
exceptions
    usage_error          = 1
    system_error         = 2
    internal_error       = 3
    others               = 4.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
For details see the std. example prog. FP_EXAMPLE_01.
3)how can we calculate totals in adobe form?
Within the form interface u can calculate it or u can use the Javascript or formcalc scripting language to do the same.
Regards,
Joy.

How Can I Remove All the Links in a Document?

I want to remove all the internal and external bound links in
a number of my html documents. Is there any way I can do this with
one action. I tried using Control + F on </a> and replacing
it with nothing and that works. But Control + F on <a
href="URL"> doesn't work as the url for that is different every
time.
Is it possible to remove all the links in one sweep, I hate
to do it manually one by one as there are just so many?

Tanim23 wrote:
> Is it possible to remove all the links in one sweep
Yes. In the Find and Replace dialog box, set Search to
Specific Tag, and
select a in the drop-down menu alongside. Then set Action to
Strip Tag.
You can do this in the current document, a particular folder,
or the
entire site, depending on what you select in the Find in
drop-down menu.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS4",
"PHP Solutions" & "PHP Object-Oriented Solutions"
http://foundationphp.com/

UWL detail iView for workflow --- removing attachment link

Hi All,
I have implemented the UWL iView and it is working fine. Now I have a requirement where in I have to remove the attachment link that appear in the UWL iview.
Is it possible ? If it is then please let me know how ?
Thanks
Ritu

Hello Markus
is it possible to remove the link ONLY for certain tasks? There is a suggestion here: Re: Disable attachment in preview of UWL : possible ?, but it is not working (can't see any task to choose under "object visualization").
Do you have an idea?
Kind regards
Bettina

JDeveloper 3.1 remove file problem

I'm not able to remove a file form a project with the remove file menu item. I removed it from the opened list as said in the help.
Anyone experienced the same problem?

This is how I remove a file from a project:
- Make sure I have the workspace tab selected
- In the navigator, select the file I want to remove
- Select File->Remove File from the main menu
Note that this does not delete the file itself, just removes it from the project.
Blaise

In Adobe Forms, Is it Possible to remove File Attachment Link of Navigation

Similar Messages

Maybe you are looking for