In trying to access iTunes U the screen goes into an endless " flashing" frenzy (on iPad2). Rest of iTunes seems OK. Rest o
In trying to access iTunes U today, the screen goes into an endlessly looping " flashing frenzy"
Rest of ITunes looks ok though.
I hope they will soon be repaired iTunes U.
Similar Messages
-
After trying to update my IPOD the screen goes blue and sometimes yellow
After trying to update my IPOD, the screen goes blue, sometimes yellow.
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
Since downloading iso7 when I open iTunes Store the screen goes blank but the icons still come up at the bottom of the screen . Help???????
Go into the Music app and access the iTunes Store through it. You should on have to do so one time.
-
Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!
Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport -
When i open the itunes store, the screen goes blank after 2 seconds so I cant order music
When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?
same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.
-
okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??
Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling -
When I go to the itunes Store it starts to load and then the screen goes back to my desktop. What's wrong?
Hello betchk,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario -
The screen goes into sleep during use
i just bought mac aie 13 inchs for 1 month, and it constantly blacked out and goes to sleep mode. I need to press the keyboard to wake it. how can i solve this problem?
This problem seems to be affecting many people, and not just on the MacBook air.
There's another thread with many people reporting the same problem here: (unfortunately, with no solution yet, though!)
https://discussions.apple.com/thread/4165133 -
Iphone 5 is showing usb to itunes on the screen
iphone 5 is showing usb to itunes on the screen
It is in Recovery Mode.
You need to connect to iTunes on the computer it was synced with and restore. -
i upgraded new software onto my iphone 4 however it stopped syncing and said error so when i tried to access my phone the itunes USB was showing in my phone screen and now i cannot access my phone
When it stopped and said error, what was the error? You are saying that you disconnected the phone from the computer and all you see is the USB showing on the phone? Then you need to reconnect to the computer and restore the phone.
-
I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .
Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new. -
my iphone screen is broken and i need to access it through itunes but my phone is locked. it cannot be unlocked on the screen but is there any way i can do it on itunes so i can access it?
Depends, if you've synced with this iTunes, while that passcode was enabled, you won't be prompted to enter the passcode when connecting your phone. If you have not synced, while that passcode was enabled, you will. So, if you fall in the later, there is no way to do what you want.
-
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
Why does the screen turn black? I was using it normally and it all of a sudden faded to black and hasnt come back on since yesterday. You can see the back light but no image on the screen. Ive plugged it in and it vibrates that its connected but still the screen stays black. I left it alone while I slept and tried again in the morning but still nothing.
So weird mine is doing the same thing. I didnt drop it or anything. I was texting and it suddenly went white and then turned black. It says its plugged into itunes but the screen comntinues to stay black.
-
Hi, I forgot the password of my iphone4s I tried more than ten times and it lock me out with a message to connect the iPhone with itunes on the screen but the itunes doesn't recognise it. What can I do?
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Also, see iTunes- Restoring iOS software.
Maybe you are looking for
-
Share my experiences with the B520 Model
I have purchased the Lenovo All-In-One desktop computer model B520 on Nov 15th. It arrived in my office on Nov 21st. It’s been a month now after using it, I would like to share my thoughts about it. Pros: Saves space, this is the biggest advantage o
-
How to delete the duplicate cards in ALUI
Hi, How to delete the duplicate cards in knowledge directory Thanks & Regards Dheeraj Edited by: dheeraj on Sep 17, 2008 2:31 PM
-
Error while runing configuration CRS
Dear All, After setup, Cluster ware run configuration automically. The first statement fail, and I get some error in the logfile: D:\oracle\product\10.2.0\crs\cfgtoollogs\cfgfw\CfmLogger_2007-07-20_11-55-16-AM.log INFO: Creating new CFM connection IN
-
Using &variable in stored procedure
Is there any way to use &variable or something like this in stored procedure. I need procedure that is stored, called from SQLPlus and can read-get values through typical keyboard input.
-
What can I do because I have 2GB ram and it´s so slowly
Hi friends: I´m from México and this is my story; When I start to use my eMac (a year ago) all the process are very quick, but now when I use any application to open files in the finder window of the program this process can be take 10 or 15 seconds,