Incorrect Answers freeze assessment

Hi,
I am using Captivate 2 and I have a log in simulation where
the participant must enter a name, a password and then click login.
On the next screen they need to click a continue button. Very
simple.
If they answer correctly they can complete the assessment. If
they enter the incorrect name or password the assessment stops on
the last screen and will not move forward - the continue button is
acting as if its disabled. There appears to the learner that there
is no way out of the assessment, and that the assessment has
"crashed".
Are there any settiongs that could be causing this behaviour?
SCORM is required, currently set to: Report: Pass/Fail,
Report quiz results only, reposrt score as percentage, report only
the score.
Quiz Settings tab
Quiz: Pass required
Setting: only Show score at end is turned on
Pass Fail optoins:
Pass set to 90%
Passing grade is continue.
Failing grade is infinite attempts, jump to slide 1
Regrdas,
Mike

Contact Mac App Store Customer Service via this link - http://www.apple.com/support/mac/app-store/ - explain your problem - they are the only ones that can get you access. There is no phone support. This is not an iTunes question as the App Store is a different program.
MJ

Similar Messages

Captivate 7 - Incorrect Answers not allowing quiz to Continue. Buttons not functioning correctly (Clear, Back, Next). I have Knowledge Check

I am experiencing a problem with the Quiz feature of Captivate 7. Correct answers are submitting o.k., but Incorrect answers are not. You cannot go forward with them, i.e., the program will not Continue or go to the next question with an Incorrect answer in the Assessment.
This presentation has 15 Knowledge Check questions (0 points) and 10 Assessment Questions (10 points each).
Also the buttons don't always work correctly, i.e. Clear, Next, Back.
What could I try?

Thank you for your response. No. I didn't do anything like that. I figured that I should probably divide this into 2 parts and aggregate them. That was going to work, but I checked with one of our other users in TX. He told me that what they always do is to divide up the presentations into 2 parts. They don't aggregate them, but instead, let the LMS take care of going from the learning module (with the Knowledge Check questions) to the Assessment Module. Once you exit from the learning module, you immediately go into the assessment.
Captivate 7 doesn't really allow for this type of test without aggregation or an LMS. You can have a pre-test, but it expects those questions to come at the beginning of the course, not to be interspersed throughout the course. I also found that using the Question Pools gave me more flexibility in moving Knowledge Check questions around using the Filmstrip.
The other interesting thing was that the TX expert told me to remove the Accessibility Feature because, apparently, it causes other parts of Captivate not to work. I found that to be strange.

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.

AppleFAN7591 wrote:
I need to delete my Apple ID on my iPhone 4. I forgot my psw for my account. When I answer the security question, the system responds incorrect answer. I created a new Apple iTunes account but I still unable to delete the old iTunes account.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

Hi i am planning to write 1z0-144 exam in 2 weeks. will the questions based on 11g or 12c documents? should i prepare base on 12 c contents or stick to 11g only. i don't want to answer incorrect answer.

should i prepare base on 12 c contents or stick to 11g only. i don't want to answer incorrect answer. please advise...

Reading your answer i flipped to the exam page at Oracle Database 11g: Program with PL/SQL | Oracle Certification Exam ... the key information fields are:
Exam Product Version: Oracle Database 11g
and
Validated Against: This exam has been validated against Oracle Database 10g, Oracle Database 11g, Oracle Database 11g Release 2, and Oracle Database 12c Release 1.
The exam product version is the best source to read the documentation against.
In the event of a feature varying between versions ( core language features will typically only upwardly enhance, some compilation/optimization features might on the very rate occasion vary) the question is likely to explictly state 'oracle 11g [release 1|2]'
( To state the obvious for this exam the topic "Use the new PL/SQL compiler initialization parameters" would likely refer to 11g introduced features and would not be present in 10g ).

Setting incorrect answers on a customised quiz

Hi there.
I'm setting up a customised quiz (not using question slides) and was wondering how you set the correct/incorrect answers. What I've done so far is included all answers in the quiz (via the reporting section), but only set the right answer to "Add to total". This seems to work, as I get the correct scores at the end of the quiz, but when looking at my LMS reports it's counting all answers as "Correct", even when answered incorrectly.
Any idea if this to do with the Captivate settings or the LMS settings?
The LMS I'm using is a customised one built for the company I work for using a Joomla template.
Thanks.

Hi Lilybiri.
Thanks for the response. To explain further...
This is what I'm seeing on my LMS report (this is an example for one question)
As you can see the result of the question is showing as "correct", but it was actually answered incorrectly. It's a multiple choice question using click boxes. For the correct clickbox I've got these settings:
The wrong clickboxes have these settings:
I've also tried unticking the "Include in quiz" box, and only having the "Add to total" box unticked, but my LMS still tells me it was answered correctly when answered incorrectly.
Any thoughts on why this is happening?

Quiz not advancing after incorrect answer (quiz uses user variables to show wrong answers)

Hello All,
Long time lurker, first time poster. Hopefully someone can help me.
After viewing this excellent video on the adobe captivate blog "so what were the right answers anyway" I created a quiz with user variables and a conditional advance action. It displays red crosses next to the each question that was incorrectly answered at the end of the quiz.
I set up user variable for each question with a value of 0. On an incorrect answer the variable would be set to 1.
At the end of the quiz is a slide which lists the question and shows a red cross next to each question with a variable set to 1. uses conditional action which is triggered "On Enter"
This works, but my problem is when I preview the quiz (in browser or as SWF), on an incorrect answer the failure caption appears but will not actually advance to the next question when I click anywhere or press y. It works OK on correct answers.
I can sovle this by adding a next button, but I want to understand what I'm doing wrong.
Using captivate 6.0.1.240 (boxed copy)
windows 7
images on quiz properties and conditional action below
Any help appreciated.
Regards
Jacob C

I tested this work flow on 6.1.319 and it works fine. So it is a bit guessing in the wild... no 6.0.1.240 around for the moment. Seems strange, because a simple action like your Assign action should normally release the playhead. But of course it is a question slide and they do not always behave as expected. Could you try to replace the Assign action by a standard advanced action with 2 statements, like this:
Assign var_question_1 with 1
Continue
And please, let me know if it works? This could be a difference between the two versions, but not sure at all.
Lilybiri

Scoring: Giving Negative Points for Incorrect Answers on a Quiz

We are using Captivate 5 and I was wondering if there is anyway you can remove points for incorrect answers? Say if you have a multiple choice question with 5 options, 3 of the options would be correct and 2 incorrect. Is it possible to give a -1 point if the incorrect choice is made and give 1 point each for the correct options?

Hello and welcome to the forum,
No, that is not possible yet, same for partial scoring.
I have a workaround, using variables and advanced actions to achieve that. You can find some examples on my blog (http://lilybiri.posterous.com). But the issue is to report to a LMS. Trihan has found a solution for that, using JavaScript but I have not yet tested it out, trying to find the tiem.
Lilybiri

Show Incorrect Answers Only on Review Quiz

Is there a way to show only the incorrect answers that the learner selected after clicking on the Review Quiz button? Basically I don't want the correct answers shown.

Which version are you using? If it is version 5 or before, you can just delete that part of the Review messages
Tried it with CP5.5 as well, but there this is not functional,
Lilybiri

Creating captions for incorrect answers for hotspot quiz?

I am creating a hotspot question where there are 2 images for the learner to choose, one correct and one incorrect. How can I create a caption that tells the learner the reason why the incorrect answer is incorrect?

Is this a default hotspot question? Recently I published an example of a custom hotspot question, then it is much easier to control everything.
Custom Hotspot questions in Captivate 8 - Captivate blog
If you want to use the default hotspot, you can edit the default Failure caption with the explanation you want to give.

Show Incorrect Answers Upon Review

Can you set Captivate 8 to show incorrect answers upon review? It is showing correct answers but I can't figure out how to make it show incorrect answers too.

By default Captivate will show both correctly answered questions and incorrectly answered questions.
There is no 'option' to show ONLY one or the other during review. You would need to set up user variables for each question slide to track whether it was answered correctly or not and then check these user variables with conditional actions ON SLIDE ENTER of the question slides when in Review Mode. There is a system variable you can use to check for Review Mode.

Answers Freezing during dashboard editing

Hi,
We're currently experiencing intermitent Answers "freezes" during dashboard editing. The session has to be closed and logged in again. This is causing a massive perception issue before the service goes live.
The only errors I can see are in the saw.log - no errors are seen in the nqserver.log/nqserver.log. The only relevant errors I can see are as follows:
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
[nQSError: 46066] Operation cancelled. (HY000
and
R access denied for user HITCHIM to path /
--------------------

Hey there user635059,
When you say "freeze", I guess the links/buttons all stop responding and the page just sits there, yeah?
Do you get "freezes" during any other aspect of OBI operation? - e.g. viewing reports in a dashboard, creating reports in Answers, etc. This is only happening when you're editing a dashboard?
A.

Move forward even on incorrect answer with infinite attempts?

Hello,
I want to use captivate for a summative assessment where students can have inifinite attempts at each question and are able to move backwards and forwards through the quiz. From what I can see at the moment when I set the question level attempts to infinite the slide never progresses until they get the answer correct. I want them to be able to change their answer but move forward on submit even if their answer is incorrect? At the moment I can't seem to see a way of doing this? Is my only option to use custom slides?
Thanks.

You are correct that if you set infinite attempts on a question then Captivate will assume you wanted the student to remain on that question until they got it correct.
Developers often find it difficult to understand how Captivate's quiz questions work. There are many ways you can configure the question options. In fact there are good reasons for seemingly bizarre behaviours, but those reasons are often masked by the way your settings are configured.
As a sample: Once the participant submits an answer for a quiz slide (correct or incorrect) and then progresses to another slide, their answer for that slide is locked in. If you have multiple attempts on that question allowed, AND you have backward movement allowed, THEN your participant can move back to the previous question and reattempt it, but if you don't have the Retry caption or Failure levels turned on, Captivate will then only appear to allow them to submit a correct answer.
If you want the user to be able to move forward even if their answer is incorrect, just enable the SKIP button on the question slide. The user can then opt to click this button to move to the next question.

AirDisk - incorrect password - freezes - stuck - bug - blocked .

Hello my friends!!!
i am here to ask some help about a big problem with the AirDisk that i have, and also 2000-3000 others people have too.
The problem is very well described in this locked topic:
http://discussions.apple.com/thread.jspa?threadID=1155412 (120 reply, without a fix).
Now my Airdisk freezes twice a day!!! a really bad problem.. more big is the Disk connected more Freezes, More Leopard OSX on the network more Freezes... but what about to introduce a Fix apple? to much work for thinking about iphone 9-10G features ?
QUOTE:
+I'm then unable to connect due to an "Incorrect password" which is not true. The password is correct. I am forced to restart the base station, then the disk connection works fine (with the same password).+
+Seems that a restart of the Base Station is randomly required to maintain the disk connection. The network is not being interrupted at all. It's simply the disk connection that drops off.+
QUOTE:
+Same problem here.+
+Happened occasionally previously, now happens daily (after FW upgrade, I guess).+
+Even for machine connected to the Extreme with wire (i.e. it is not a wireless problem).+
+I have it configured to all users connecting with the same password (no guest access)+
+Restart of Extreme required when connection lost. +

hi!!!!
i am still running nothing OLD... this problem persist also in 7.3.1 and is much much worse than in 7.2
screenshot of my airport utility http://img444.imageshack.us/img444/9402/immagine1nr3.png

Quiz Captions for Correct & Incorrect answers

I have a quiz in which I've deleted the Correct and Incorrect captions on each question. My boss has had a change of heart and now would like to provide feedback using these captions. In the Quiz properties, I can bring the Correct caption back onto the slide but can't seem to do the same with the Incorrect caption. Does anyone know of a way I can get this done?

Try putting Failure Levels at something else than None
Lilybiri

XSL addition returns incorrect answer

Hi,
I have a piece of XSL code to do some mapping in PI 7.1 which works correctly in XML Spy, but when imported into PI gives an incorrect result.
The source XML contains
     <HEADER>
          <BALANCE>333.33</BALANCE>
     </HEADER>
     <DATA>
          <DEBIT>15.42</DEBIT>
          <CREDIT>0.00</CREDIT>
     </DATA>
     <DATA>
          <DEBIT>0.00</DEBIT>
          <CREDIT>14.00</CREDIT>
     </DATA>
The code is
<xsl:value-of select="//HEADER/BALANCE + //DATA[2]/CREDIT - //DATA[1]/DEBIT"/>
Pretty basic stuff. However PI is returning a value of 331.90999999999997 instead of 331.91
Yes, it's close, but this is addition. It should be exact.
Any ideas?
John

Answer found. It's a known problem with XSL, not PI. It happens on some processors.
From http://www.xml.com/lpt/a/810:
Warning With some XSLT processors, the use of decimal numbers may introduce a tiny error. For example, the "3.2 - 4" in this example comes out as "-.7999999999999998" on some processors. While being off by .0000000000000002 isn't much, being off at all shows that math is not XSLT's strong point.

Incorrect Answers freeze assessment

Similar Messages

Maybe you are looking for