Incorrect date when locale changes

Hi,
Can somebody help me with this.
The following formula is used to get the month out of a date input by a
user at the prompt.
=Month(ToDate(UserResponse("Start Date");"MM/dd/yyyy HH:mm:ss a"))
when the user locale is US and input value is 06/01/2009 00:00:00 AM
gives "June" as the output which is correct. However, when the user
locale changes to UK the same date 01/06/2009 00:00:00 with the below
mentioned formula gives "January" which is incorrect.
=Month(ToDate(UserResponse("Start Date");"MM/dd/yyyy HH:mm:ss"))
Thanks,
Florencio.

Hi,
Based on Operating System the date format changes. So try to create a package with required date format and install in our System for consistency or based on the date standards followed in the country we can change it report as select the required date column -> properties -> select date and define the required date format.
Thanks & Regards,
Suresh

Similar Messages

Update button label when locale changes, in AS3

What I'm trying to do is pretty do what this does:
<s:Button label="{resourceManager.getString('Strings', 'some_resource')}"/>
but in ActionScript code. I have a function to add a new tab button to a layout which takes a string and just trying to set the label to the same string doesn't work obviously. So what I need is a way to set the button label to some bindable value that will update whenever the locale changes, like it does automatically when doing it in MXML.

Nevermind, I figured it out. For those of you that are curious about the solution I found it's in the code below. The only way I could figure out how to get it working is by declaring a local function right after creating a button and attaching it as a "change" event handler to the resourceManager.
public function addTab(resourceName:String):uint
     var newTab:Button = new Button();
     newTab.label = resourceManager.getString('Strings', resourceName);
     newTab.setStyle("skinClass", Skins.Buttons.TabButton);
     // Create a local function that will update the button label whenever the locale changes
     var localeChangeHandler:Function =
          function (e:Event):void
               newTab.label = resourceManager.getString('Strings', resourceName);
     resourceManager.addEventListener("change", localeChangeHandler);

Report Viewer shows incorrect data when viewing pages from last to first

Post Author: Fmorales
CA Forum: .NET
Hello.
I've made a huge report with Crystal Reports for Visual Studio 2005, and sometimes the Report Viewer show data with errors.
If I see all pages of my report in order, 1 first, then 2nd, 3, 4... until the last one.... The report is always correct.
If I see all pages in reverse order, 1 first (shown by default), then last one, then last one-1.... until 2nd.. All years show incorrect, except first one...
In an outer section, for every year, there is a final row which shows summarize calculated data. The error consists in that every value of the row is 0.
It seems that Crystal Report calculates while showing, that's good.. but... Why does it ignore the data before when I see directly the last page?? It forces me to see all pages one by one in ascendant order to ensure data is correct.. I must fix that error.
The way I calculate data in the problematic summarize row is a bit complicated, but I'll try... Let's focus in one only column (the other ones are similar). The summarize value is a formula which simply show a global value :
WhilePrintingRecords;
CurrencyVar margenActual;
which is being increasing or decreasing along the group:
WhilePrintingRecords;
CurrencyVar actual:=actual+CurrentFieldValue;
if {PresupPeriodifMesesAux_DS.TIPO} = 'PAGOS' then CurrencyVar margenActual:=margenActual-CurrentFieldValueelse CurrencyVar margenActual:=margenActual+CurrentFieldValue;
DefaultAttribute
It is placed in the backgrond property of a CrossTab cell in a hidden pre-section... Well.. I know it's a bit complicated, but I have to do that way because it was the only trick I found to make a summarize file before printing data summarized (that's why the line "CurrencyVar actual:=actual+CurrentFieldValue;" appeared in formula). So I also wanted to use this formula to acummulate "margenActual".
In the inner section I reset the actual value (this value always go fine):
WhilePrintingRecords;
CurrencyVar actual:=0;
Before end of year I reset the margenActual value:
WhilePrintingRecords;
CurrencyVar margenActual:=0;
I've tried multiple combinations (using WhileReadingRecords instead WhilePrintingRecords) but data is incorrect or I cannot get rid of visualization page's problem....
Any idea?
Thanks a lot

quote:
Originally posted by:
ntsiii
If you were previously using <mxXML> you WERE using
e4x.
So remove that tag, create an instance variable of the same
name, typed as xml, and in your result handler, do as VarioPegged
suggests, though I would cast/convert to xml first:
companies = XML(event.result);
trace(companies.toXMLString()); to look at your xml
var xlCompanies:XMLList = xmlCompanies..company; //all such
expressions return XMLList, never XML
trace(xmlCompanies.length()); //
Tracy
Ok so the ID of the mxXML was being interpreted as an E4X
variable at compile time?
I tried changing the name of the ID of the HTTPService call
from "marketData" to "MDATA" and assigning the variable marketData
to the result of the HTTPService query, which if I understand you
correctly should basically make everything work as it was before,
but it seems to be a problem.
when I try to run it puts an exclamation point on this line
<toolbox:TreeMap id="treeMap" width="1200" height="800"
dataProvider="{marketData}"
labelField="@cname" weightField="@amount"
colorFunction="{itemToColor}"
toolTipFunction="{itemToToolTip}"/>
That code refers to a SWC file. Apparently it wants
marketData to be a data provider. If I change the dataProvider
reference above to "MDATA" (the ID of the HTTPService) the App
compiles, but I get two errors at runtime:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
ReferenceError: Error #1081: Property @age1 not found on
mx.rpc.http.mxml.HTTPService and there is no default value.
What should I change this reference to? It won't compile if I
use the variable I made for the e4x results and it is reading
gibberish if I have it read directly from the
HTTPService....?

Incorrect dates when sharing between iMac & MBP

When I try to import a shared album from my iMac to my MBP using iPhoto sharing in preferences, some of the photos' dates are incorrect. They are correct on the iMac, but incorrect when imported onto the MBP.
This only seems to occur with iPhone photos. Photos taken with either of my Canon cameras transfer with the correct date, but iPhone photos all have a date of 1 Jan 2001 00:00:00. (I've just noticed that the GPS data (and I think keywords) are lost too.)
There don't seem to be many options in the sharing menu (under preferences) - it's basically either on or off with a choice of all photos or selected albums.
I've had a quick Google and can't immediately see this described elsewhere. I'd be grateful if anyone can suggest what I'm doing wrong.
Thanks
prx

Thanks for the super quick response!
I dragged the photos to make sure they moved (or were copied) to the MBP from the iMac. (When I first tried it the photos clearly didn't move as they were not viewable full size on the MBP when iPhoto was closed on the iMac, yet thumbnails/previews were still visible.)
Having moved the photos, I thought the date was in the exif data within the photo jpg file, so am surprised that it got changed. What I'm finding most odd is that only iPhone photos are affected. I'd have thought that those would have been the ones that transferred perfectly!
Would it be better to export and re-import (although I will investigate iLM - I've seen it mentioned before.
prx

WebI displays incorrect dates when sourced from SAP

We have several issues, all tied to displaying dates from a BEx Query, through the universe, into WebI.
Scenario One: Dates that have a datatype of date will parse in the universe, but will give driver not capable when used in WebI. Could this be tied to an invalid date?
Scenario Two: Dates set with date datatype parse correctly and can be queried in WebI, but return incorrect results. If queried WITHOUT a measure, date appears as one day less than actual date (ex. SAP date = Apr 28, 2009 but universe object set with date datatype shows April 27, 2009. When a measure is added, the same date displays as Sept 27, 1976.
I suspect that we need to modify the data access files in order to accurately convert SAP dates (which by default come into the universe as Character) to a date datatype. If this is the case, are there sample sapen.prm and sap.sbo files to ensure appropriate settings?
Does anyone have additional thoughts on what could be causing this issue? Are there sample sapen.prm and sap.sbo files anyone would be willing to share?
Thanks!

Hi Robin,
If you are using BOE XI 3.1. Then make sure that you apply fixpack 1.4 on it because the issue you are Describing is Fixed in this fix pack.
Here is the Description of that Particular issue In Release Notes of Fix pack 1.4
      ADAPT01181134
      Description:
      When users create a Web Intelligence document with the universe which is built based on SAP data, it fails to display correct values for some Date objects. This problem occurs when users have a timezone of 'GMT-x hours' on the machine where BusinessObjects Enterprise is installed.
      I hope this would solve your problem.
Thanks,
SK.

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

Dump "Buffer table not up to date" when we change contracts

Hi experts
I use SRM 3.0
Since we have added modifications in contracts, it is impossible to change contracts there's always a dump like "Buffer table not up to date : In FORM ITMADM_UPDATE (function group SAPLBBP_PDIAD) an inconsistent status was discovered. "
I saw a message in sdn with the same problem and so i tried to desactivate the BADI Check and the problem is not coming any more.
But I need to reactivate the Badi and I really do not understand why it dumps and the link with the badi Check and everyhting is correct in the Badi.
My last changes were : add a custumer field on header and check in the badi check tke rights values for this CUF.
Thank you for your help.
Peggy.

Dear Rao
Go to Tr:ST22, get the dump log details, from there you will find where the error occur, as well as the callstack, Eg, which
FM, form ,has been called before the error occur. Set BP there , so you can proceed debug.
This dump could happen if there are some data is missing for this SC, in this case, FUNCTION 'BBP_LINK_GET_OW'
might interesting.
Regards
Lauren

Code for capture digital data when change of state

Dear Sir,
I had written a program to capture the digital data when it change of state.
It work well when I check the check box "Lock file for faster access".
But error occur when it unchecked.
Because I need to open the tdm file at the vi running, thus I need to uncheck it.
Please kindly to advise any solution for it.
The program is attached.
Thank You.
Attachments:
datalogcos.vi ‏53 KB

Hi Jayme,
Sorry for late reply.
The screen capture of error message is attached.
Thanks for your helping.
Poly-Alex
Attachments:
error.jpg ‏24 KB

What happens to data, when Info object property is changed to have ALPHA

Hi experts,
I have a trivial question,
What happens to existing data, when I change the info Object property to have an ALPHA convesion routine ? Specifically I need to know, will it remove any similar looking entries ??
thanks in advance
D Bret

Check this:
Re: Alpha conversion for an existing infoobjects
Re: ALPHA conversion routine - how to change an existing InfoObject
Alpha conversion
TCODE: RSMDCNVEXIT in BW and What is Alpha Conversion?
Hope it helps..

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

SSAS Default Member Causing incorrect data in Excel Pivot Table using Multi-select in filter

I have an Excel 2013 pivot table connected to an SSAS (2012) cube. One of my dimensions has a default member specified. When I drop this dimension in the filter area of my pivot table and select multiple members including the default member then
only data for the default member is shown. Selecting multiple members where the default member is not included does not result in an issue.
I believe this may be in an issue in how Excel builds the MDX but wanted to see if there are any work arounds.
This issue can be recreated using AdvetureWorks using the following steps:
Alter the Product Dimension of the SSAS Default Member by setting the default member of the Product Line Attribute to Mountain: [Product].[Product Line]&[M]
Process the cube
Connect to the cube via Excel 2013
Drag internet gross profit to the Values area (The value will be 4700437.22 which reflects the Mountain default filter)
Drag Product Model Lines to the Filters area (you will see Mountain selected by default)
Change the filter by checking the Select Multiple Items checkbox and checking Mountain and Road (You will see that the amount does not change)
Change the filter again by selecting Road only (to demonstrate that Road has a value, 5602105.8, associated with it)
Change the filter again to select Road and Touring (to demonstrate that the correct aggregation of the two selected members is preformed)

Hi Hirmando,
According to your description, the default member cause incorrect data when dragging a attribute that contain a default member to the FILTERS area, right?
I can reproduce this issue on my environment, when dropping this dimension in the filter area of my pivot table and select multiple members including the default member then only data for the default member is shown. Currently, it's hard to say the root
reason that cause this issue. In order to narrow down this issue, please apply the latest server pack and cumulative update.
Besides, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback So that microsoft will confirm if this is a know issue.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

How to modify inputtext in af:query when user change another inputtext

I have Jdev 11.1.1.3
I'd like to change inputtext B (this contain a Date) when I change inputtext A (this contain a another Date).
Those fields are inside af:query.
I try to explain better.
I have created the af:query and user before executing the query selects the start date in inputtext A when he/she comes out with tab, I would like to add one day to the inputext B.
It's possible?
For me, the complexity is that I can not manage the fields inside af:query
Thanks

Hi,
there is no direct access to this. However, you should be able to get the input value to then set a new default value on the ADF BC model for the dependent attribute. After this you PPR the query component to show the new value.
Sample 160 at http://blogs.oracle.com/smuenchadf/examples/ may be helpful
Frank

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

Get date from Oracle when local time zone is different from Oracle time zon

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send e.g. 28.06.2002, but in Oracle date is save as 27.06.2002 01:00 (hour=01 , I suppose that is because java.sql.Date hasn't time the Oracle set it time = time zone=+1) And when I get date from Oracle I get incorrect date. In SQL I don't use date masks. Maybe solution is to use java.sql.Timestamp object (when save date to Oracle) instead of java.sql.Date?
But if I save date at e.g. 01:00 clock and send e.g. 28:06.2002 in Oracle, date is save as 28.06.2002 01:00 and when I read from Oracle I get correct date.
Thank you.

Hi!
Local machine time zone= +2
Oracle time zone= +1
I set date to Oracle using java.sql.Date.
From application I save date at 00:30 clock and send
e.g. 28.06.2002, but in Oracle date is save as
27.06.2002 01:00 (hour=01 , I suppose that is because
java.sql.Date hasn't time the Oracle set it time =
time zone=+1) Presumably you are using setTimestamp() to store the value. If you are explicitly using a varchar (string) then you will have to correct the timezone your self.
And when I get date from Oracle I get
incorrect date. In SQL I don't use date masks. Maybe
solution is to use java.sql.Timestamp object (when
save date to Oracle) instead of java.sql.Date?The method setDate/getDate store a 'date' which is not the same as a 'date and time' for which setTimestamp/getTimestamp are used.
But if I save date at e.g. 01:00 clock and send e.g.
28:06.2002 in Oracle, date is save as 28.06.2002
01:00 and when I read from Oracle I get correct date.
Thank you.

VA01 ATP incorrecct results when delivery date is programmatically changed

Hi Guru's,
When creating or modifying a sales order (VA01 & VA02), we need to programmatically assign the delivery date a) for certain customers or b) when the delivery priority is changed from downs to regular order and visa-versa. For examples: 1) user enters a delivery date 02/01/2012, the program (userexit_check_vbep) will automatically replace it with a calculated
date (i.e.. 2/20/2012). 2) if user changes the delivery priority from regular order to a downs order, the program will automatically replace delivery date to current date.
But are getting incorrect ATP results when requested delivery date (based on what user enters in VBAP-LPRIO "delivery priority") is programmatically changed and then user manually enters the date and run ATP (see steps 8 & 9 below).
VA01 execution steps:
1) Used VA01 and entered a material of quantity 1, requested date 2/01/2012, delivery priority = regular. Date was overwritten automatically with program calculated date 2/20/2012 as expected.
2) ATP automatically ran successfully for the initial entry.
3) I then changed the delivery priority from regular order to downs order & requested delivery date was automatically changed to current date 02/01/2012 as expected.
4) ran ATP manually and all is well.
5) I then changed the delivery priority back to a regular order and date was automatically changed back to 02/20/2012 as expected.
6) I ran ATP manually and again all is well.
7) I then manually changed the delivery date 02/25/2012.
Incorrect / bad results:
8) ATP then passed back 2 sub-items lines with the quantity of 1 each. The quantity on the main line item is doubled to 2.
9) I then tried to delete the main line item manually to start all over, but the transaction just hangs because it tries to go to ATP, but cannot resolve what to delete.
Do you have any suggestions to help resolve this?
The following SAP user-exits were modified:
a) MV45AFZB
1) userexit_check_vbap
- for certain customers (a custom "override days" field stored in VBAP is populated), delivery date is automatically calculated using this field (i.e. current date + override days).   If user entered date < calculated date,   calculated date is used (xvbep-edatu).
- If user changes delivery priority, xvbep-edatu will be set automatically to either the calculated date (regular order) or current date (downs order).
2) userexit_check_vbep : if user enters a delivery date (vbep-edatu), it is checked against calculated delivery date & overwritten, if it is < calculated date.
b) MV45AFZZ - userexit_move_field_to_vbap :
- override days is determined & delivery date is automatically calculated. If user entered date < calculated date, calculated date is used (xvbep-edatu).
- If user changes delivery priority, xvbep-edatu will be set automatically to either the calculated date (reg.order) or current date (downs order)
Reason for updating xvbep: if only vbap-lprio or vbap-override (custom field) fields are changed, the VBEP user exit routines (userexit_move_field_to vbep or userexit_check_vbep) do not run. Change to xvbep does trigger userexit_check_vbep.
Please advise.
Joe

This is not an SD question and should be moved to ABAP forum. It seems to me that the issue is not with incorrect ATP but with the subitems / main item updated incorrectly. This needs to be resolved by a developer who wrote the user exit. Most likely either a user exit is triggered when not expected or a wrong line updated, etc. Debugger should be helpful.
Also instead of setting delivery priority, why can't the users just change the delivery date to current date? This seems just as easy to me...

Incorrect date when locale changes

Similar Messages

Maybe you are looking for