Infotype records of infotype 0027 can not be edited.

Dear experts,
I have the following problem:
I can not edit infotype records of infotype 0027. If I delete a row, the message "no change found" is displayed. I press the "save" button but when I display the record again, the row has not been deleted.
Thank you in advance,
Vana Sounta

Hi Vana,
I assume you are using wrong dynpro (2100) instead of 2500 for MP002700. So please check first in T582A for IT0027, if
you have maintained 2500 as single screen then make sure that in table T588M you are using module pool MP002700 with screen 2500. Hope it helps,
Kind Regards
Christine

Similar Messages

The condition record for use B can not be displayed

Hi gururs,
What does this message (number : VE896 ) mean ?
How to make it desapear ?
P.S : it's about output type for purchase orders.
This message is displayed when I click on : "Goto -> Determi analysis" in tcode ME22N.
Regards,
Bahia.

Hi
It means you are trying to veiw the executed condition record. System found the condition record for entered transactional data which you cannot see by clicking on it (when you see green record in condition analysis).
For given condition type -> and access sequence/ access - system shows the condition record that is determined. You can see its details by clicking the access which shows the message that condition record has been found with its determined parameters.
Ex: For batch determination I have set up one search strategy with a condition type (with access sequence). I created one condition record. When creating say sales order -batch determination takes place based on condition record parameters. System shows a green light for determined condition record. You cannot see its details - if you try to see then system issues a message like ''The condition record for use B can not be displayed''. If you want to see click on its immediate predecessor (access ).
Thanks

Can not find edited pics on the phone with my computer

I am running OS5 and i can not transfer the edited pic's that I edited with the phone. I can view them on the phone but when I am connected to it from the computer I can not see them on my computer to save them. Any ideas?

Are you on a Mac? Did you try Image Capture (it's in the Apps folder on the Mac)? Maybe try rebooting your desktop or rebooting your phone and then plugging it in again.

Metronome click recorded onto audio track , can not separate during playbac

I set the metronome for "click during recording only" and for some reason the metronome clicks on this audio track during playback as well. I am recording an audio track from a Kurzweil 2500sx keyboard.
Please comment ?
David

Well just hit "c" to turn it off or look for the Metronome symbol in your transport window and turn it off there.
Maybe the Click was recorded onto the Kurzweill track when you recorded it into Logic?

My camera is not working I can not take photos, use the recorder or even I can not use the facetime's video mode. Is there anybody that can have the same problem and knows the solution?

Please answer as soon as possible.

Have you tried a rest or hard reset?
Hold your power button and your home button for about 15 seconds until you see the apple logo.
Ignore the power slider when you see it.

Approved invoices can not be edited - Approval process

Hi Experts -
I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it.
please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
10.07.2009 10:32 Description (English) by SRS Manian
     We have created approval procedure for all the invoices which are entered into the system., The
'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user.
When the Manager opens the invoice via Alert window - he/she wants to modify certain information
(lines as well as Sales person) and approve it.
The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at
all. All the information on the invoice are greyed out.
The system should allow the user 'Manager' to modify the information. Since the manager has full
authorization to the system.
10.07.2009 10:35 Info to Reporter by SAP
     Dear Partner/Customer,
We have received your inquiry and are currently processing it.
You will be contacted with a solution or an update as soon as possible.
For further details regarding the phase your message is in at the
moment please refer to:
http://service.sap.com/%7Esapidb/011000358700000575782007E
Kind regards,
SAP Business One Product Support
10.07.2009 10:59 Reply to Reporter by SAP
     Dear Manian,
Thank you for contacting us.
When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status.
When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document.
To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval.
I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator?
The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 11:59 Reply to Support Center by SRS Manian
     Thanks for the reply. The scenario is when the Manager receives the
document for approval, he wanted to edit and add it. Your reply (and
documentations) states that it needs to be rejected first before it is
available for editing. When it is gets rejected - the person who
orignated the document gets an alert and he can edit it. Here the
Manager must get an alert so that he can edit the Rejected document.
When the 'manager' rejects the document, and goes back to the alert
window to open the document - it is still greyed out !!
How does the 'manager' reject the document and edits it ?
regards
Manian
10.07.2009 12:11 Reply to Reporter by SAP
     Dear Manian,
If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'?
If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it.
Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document.
I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 12:28 Reply to Support Center by SRS Manian
     Hi:
The status of the document in the Header says 'Pending' and the status
below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian
10.07.2009 12:42 Call to Customer / Partner by SAP
     Performed on: 10.07.2009 10:41:59 (UK)
Contact person: SRS Manian
Status of discussion: Customer not reached
Subject:
Called the partner but currently engaged on another line.
Would like to hold a webex.
10.07.2009 12:42 Reply to Reporter by SAP
     Dear Manian,
I'm trying to call you but there was no response on your mobile.
When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d.
The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
10.07.2009 18:11 Reply to Support Center by SRS Manian
     Hi:
Thanks for the reply - i tried this and found out the following:
1 - In the approval templates - we had mentioned number of approvals
required as '1'.
2 - in the number of approvers - we had mentioned two users
Though the template requires only one approvals (Either or OR) the system
expects both of them to approve or reject -
Can u please let me why is this behaving like this - or is this is the
way it is designed ? - if this is the way it is designed - i beleive it
is wrong - weneed to give a solution to the customer
regards
Manian
11.07.2009 05:52 Reply to Reporter by SAP
     Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision b ecause a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration
forum. You can find the forum in this link:
/community [original link is broken]
The forum is beingmoderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum. Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed.
Thank you for your understanding.
Best regards,
Lorna Real
Support Consultant
SAP Product Support for SAP Business One
SAP Ireland
11.07.2009 09:02 Reply to Support Center by SRS Manian
     Hi Thanks for the reply - however, the solution given doesnot address the
problem we are beingfaced with our client
Is there a Development Request we can raise so that this problem is
addressed in future
I am going ahead and confirming this Message though
regards
Manian
11.07.2009 10:04 Reply to Reporter by SAP
     Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken] This is from Note 1028874.
Unfortunately,we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874.
I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real
Support Consultant
Product Support for SAP Business One
SAP Ireland
SAP Notes
Number     Short text
0001035200
Issue can be solved via existing documentation
0001111431
Deleting rejected draft documents.
0001167635
Maintenance Policy (L)
0001321234
Status of a document rejected within the Approval Process.

Hi Gordon - thanks for the reply - i am sorry i never realized that the message i raised could be messed up like this - the following is a clear message with some paragraphs:
Hi Experts - I have recently raised an incident with SAP about Approval process - the complete message and support reply is as follows - but i believe we need a change in the approval process - if the approval required is only one but you have defined two people (Either or OR) in the approver list - the system should allow the document to be edited if one of the approvers reject it. please let me know and i believe we need a change in design - unless otherwise a solid reason is given to justify the existing design
SRS Manian We have created approval procedure for all the invoices which are entered into the system., The 'Accts' user enters the invoice into the system - the invoice comes for approval to 'Manager' user. When the Manager opens the invoice via Alert window - he/she wants to modify certain information (lines as well as Sales person) and approve it. The invoice which gets opened from the alert window - does not allow the user 'Manager' to modify at all. All the information on the invoice are greyed out. The system should allow the user 'Manager' to modify the information. Since the manager has full authorization to the system.
Reply to Reporter by SAP Dear Manian,
Thank you for contacting us. When the originator sends the document for manager's approval, note that the at that stage, the document is still in the 'Approval Process'. This is because the system is waiting for the 'Manager' to 'Approve or Reject' the document. Hence, looking at the Document, it is still in 'Draft - Pending' Status. When the document is in 'Draft-Pending' Status, the document is not available for editing, because the system considers that it is still in the waiting process. In your case, the manager cannot edit t he document. To amend the document, an action is required from the approver either to reject it first. Once rejected, it can be amended and re-sent for approval. I have checked our knowledge base and noted that there is an article which describes the approval process. Please refer to the Expert on Phone Wiki Article (March 2009) with title: Why a draft documen t in an approval process cannot be modified by the originator? The link will provide the explanation:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=88735894
I have also attached Notes 1321234 and 1111431 for your reference. Best regards, Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland 10.07.2009 11:59
Reply to Support Center by SRS Manian
Thanks for the reply.
The scenario is when the Manager receives the document for approval, he wanted to edit and add it. Your reply (and documentations) states that it needs to be rejected first before it is available for editing. When it is gets rejected - the person who orignated the document gets an alert and he can edit it. Here the Manager must get an alert so that he can edit the Rejected document. When the 'manager' rejects the document, and goes back to the alert window to open the document - it is still greyed out !! How does the 'manager' reject the document and edits it ? regards Manian
Reply to Reporter by SAP
Dear Manian, If after the Manager rejects it and still the document is not editable (greyed out), it means that the document may still be in the 'Approval Process'. When it is greyed out, what is the status of the document in the header? Does it say 'Rejected' or 'Pending'? If it is still in 'Pending' mode, please verify the number of 'Approvers' set in the 'Stages' tab of the 'Approval Template - Setup' window. If there is more than one user listed as 'Approver', and o nly 1 approval is required, the system provides an opportunity to other 'Approvers' to approve or reject the document. If in your case, the number of approvers is 2, and manager 'rejected' it, the sys tem still keeps the document in Pending status as it waits for another approver's decision to reject or approve it. Also, verify the number of 'Approvals' required. If the number of 'Approvers' who have not rendered their decision is greater than or equal to the 'Approvals' required (e.g. approvers - 2, required ap provals - 2) the system keeps the document within the approval process. This is to allow the other 'Approvers' to decide on the document. I hope this clarifies the behaviour. If you can provide us a step by step screenshot of the issue, this may help us to provide a more accurate response.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: The status of the document in the Header says 'Pending' and the status below the document number says 'Suspended' - it is not showing as 'Draft'
Regards
Manian 10.07.2009 12:42
Reply to Reporter by SAP
Dear Manian,
I'm trying to call you but there was no response on your mobile. When the header says 'Pending', then it means the document is still within the approval process. Please check the Approval Template and see the number of approvers and the number of approvals require d. The number of approvals and approvers may be greater than 1. In this case, the system waits for other approvers to approve or reject the document. Once all the approvers have rejected the document, th en the document will be released and available for editing.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi: Thanks for the reply - i tried this and found out the following: 1 - In the approval templates - we had mentioned number of approvals required as '1'. 2 - in the number of approvers - we had mentioned two users Though the template requires only one approvals (Either or OR) the system expects both of them to approve or reject - Can u please let me why is this behaving like this - or is this is the way it is designed ? - if this is the way it is designed - i beleive it is wrong - weneed to give a solution to the customer
regards
Manian
Reply to Reporter by SAP
Dear Manian,
Thank you for the information. The behaviour is a current system definition documented as per Note 1321234. I have attached the said Note for your reference. When only 1 approval is required and there are 2 or more persons are allowed to approve the document, the document does not get automatically rejected when 1 person 'rejects' it. The system waits for other approvers to render their decision because a person may still approve or reject the document.
The design is not an application error. If you would like to change this design, please post your requirement in our SAP Business One Product Development Collaboration forum.
You can find the forum in this link:
/community [original link is broken]
The forum is being moderated by members of the Solution Management team specialized in certain areas, according to the folder you are in. Partners can impact the design of specific features by posting suggestions and feedback at this forum.
Kindly refer to Note 1028874 which describes more on the above process.
As the request will be handled through another process, we kindly request that this support message be closed. Thank you for your understanding.
Best regards,
Lorna Real Support Consultant SAP Product Support for SAP Business One SAP Ireland
Reply to Support Center by SRS Manian
Hi Thanks for the reply - however, the solution given does not address the problem we are being faced with our client Is there a Development Request we can raise so that this problem is addressed in future I am going ahead and confirming this Message though
regards
Manian
Reply to Reporter by SAP Dear Manian,
Thanks for the information. I understand the customer's requirement. As previously mentioned, please log a development request in this link:
/community [original link is broken]
This is from Note 1028874.
Unfortunately, we at the support centre does not have access to the list of development requests. Hence, kindly follow the process in Note 1028874. I'm sending the message back to your side for confirmation.
Best regards,
Lorna Real Support Consultant Product Support for SAP Business One SAP Ireland

Having problems with firefox 4 using creloaded (oscommerce cart) it is turning the price weight section etc into a table which can not be edited.

As above to be honest but the entire section of the top of the product add is uneditable and all information is set to zero. Which means I can no longer add products correctly to my website.

unfortunately there are tons of people with this issue but Apple has not given any answers for us to fix this issue yet. I wish they would allocate more people to solving these problems when they roll out new versions of itunes along with new hardware.

I can not save edited photos in Photoshop Elements.

I bought Photoshop elements because i thought it would help me save manipulated photos. When i edit photos and change them, then save the changes under a different file name, I continutally get the unedited original when I try to view the edited photo

Hi Bucephal,
That is pretty odd, indeed.
Just so that the community can help - could you provide us with information like what version you're using, which OS, and a brief explanation of what effect you're applying, or how you're manipulating the image?
Cheers,
David

Can not deselect edit position in table control

A table control has a property called editpos. This property returns the cell cordinates for the cell that the use is editing and is writeable. The property correctly returns -1 and -2 values depending if a header is selected or nothing is selected, however, if a -1 or -2 is written to the property it just selects cell 0,0. Is this behavior a bug?
I wanted to input -2,-2 to deselect the current cell that is being edited. Anyone have another idea on how to achieve this?

Thank you for the reply. Actually, I am not interested in the table data. I am only interested in the current edit position within the table control. The table property editpos states
Edit Position Property
Property of Table.
The row-column pair index of the current text entry. Values of (0,0) indicate the top-left text entry. A value of –1 indicates the row or column header. Values of (–2, –2) indicate that no edits are being made to the text of the control. This property does not set text focus on a control that does not already have text focus.
Since the property returns cordinates for selected column headers (-1,x), row headers (x,-1) or no selection (-2,-2). I was surprised if I tried to write a value of -1 or -2 to either the row or colum it would act as if I had typed a 0. For example, (-2,-2) would select cell (0,0) and (-1,4) would select cell (0,4). This behavior seemed like a bug to me or should at least be noted in the property help file.
I did manage to find a solution for my particular problem however. Since I am not trying to move to the header row or column and just wanted to deselect the current edit position I just set KeyFocus to false.

Solution Manager 7.1 solution can not be edited

Hi Guru!
I have a problem about basic configuration of a solution manager 7.1 sp10, in the "specify solution" task i can't edited the logical component.
do you have any idea for editing the field?
Thanks

Hello Sunil,
"Solution SAP Solution already exists and cannot be modified" means that the SAP Solution is already there in your solman system. go to tcode solman_directory and you will see the list of all solution present. if you click on solution node, you will be able to see the logical component assigned to this solution.
If you want to delete this solution, then first you have to remove the logical component from solution
Regards,
suhel

Can not make Groups work in Address Book

I'm running Mac OS X v10.7.4 with the latest version of Address Book. I'm new to Apple and am trying to set up groups in Address Book for ease of mailing to a number of contacts.
I'm connected to iCloud and am able to create group names under iCloud. I can also drag contacts into a group from my iCloud contact list to populate it and the names are displayed on the opposing page from the page listing the group names. However, when I enter the group name into a Mail message address box the box remains blank. Also, if I right click on the group name in the group list and select "Send an e-mail to the group" that will open a "new message" window but again the "to box" will be empty. When I click on a group name and then select from the task bar "Edit>Edit Distribution List..." that choice is grayed out and non-responsive. So I end up with a defined group with group members in it but it can not be edited nor available for actually addressing an e-mail message.
However, this is the weird part: What I described above was my effort yesterday, trying to get Groups going and finally shutting down in frustration. Today when I opened Address Book the groups worked! I could address e-mail messages using either method. The "Edit Distribution List..." was active and I was able to modify my group members. I was so elated that I immediately created another group. Alas, it behaved as the other groups did yesterday. The group was populated but unable to be inserted in the "to box" and I was unable to edit the distribution list. Also, after creating the new group, yesterday's groups would no longer permit being edited although I was able to earlier in the day. However, the addresses still appear in the "to box" when I invoke the group.
I am confused and frustrated. Do I have an incorrect setting that hinders the use of groups? Is there some system reset or iCloud update that occurs on a daily basis that activated the groups created yesterday? Why would my creating a new group cause me to loose the ability to edit any of the groups?
Any help will be greatly appreciated.
Thanks for reading such a long message.
Mike

Eureka. You are right. I just tested closing and reopening Mail and now today's groups work. Regarding editing the existing groups, I found an article from 2011 on CNet that claimed that iCloud disables the Distribution List Editor. The work around is to create a single dummy group under "On My Mac" which will reactivate the editor which can then be used for iCloud groups. I tested this and it works.
Thank you so much for your prompt and helpful comment.
Mike

Graphic Frame can not be renamed

FM-11 and FM-12: In the Object Properties there is no more a field Name. Hence a graphic frame on the reference pages can not be checked for its name or the name can not be edited.
I have filed this as a bug.
The dialogue in FM-12 and FM-11:
In FM-10 there was the old dialogue still active which contained this information:

Klaus,
Actually you can, but it's not properly documented. When you select the Graphics Frame, it's name shows in the Status Bar. You are then supposed to click on the name in the Status bar to get the Frame Name window in order to change it. [There are other operations that also now have this non-intuitve user-be-damned approach.] Why it's not part of the Graphics Frame Properties is a mystery that was pointed out numerous times during the pre-release programs for 11 & 12 [but I guess it was too great of an effort to rectify something that was coded without the benefit of end-user input].

Af:richTextEditor can not work fine in the popup dialog.

Hi all:
I want to use af:richTextEditor in a pop up dialog, but it can not be used correctly. The code is like below:
<af:popup id="***">
<af:dialog >
<af:richTextEditor contentStyle="width:100%" value="this is a test" inlineStyle="width:100%" binding="#{backing_myBackingBean.richTextEditor1}"
id="richTextEditor1"/>
</af:dialog>
<af:popup>
The value "this is a test" can not be shown in the editor and I can not write/edit in this rich text editor.
Anyone has some experience on using these components? Please help me.
Thanks
Hart

Hi Frank,
Below is my test code, the text editor does not work fine actually. Can you help me to find where I was wrong using this code OR is is a bug to use richtexteditor in popup dialog?
<?xml version='1.0' encoding='GBK'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=GBK"/>
<f:view>
<af:document>
<af:form>
<af:outputText value="This is test page"/>
<af:commandButton text="PopupRichTextEditor">
<af:showPopupBehavior popupId="test">
</af:showPopupBehavior>
</af:commandButton>
<af:popup id="test">
<af:dialog modal="true">
<af:richTextEditor value="this is for test">
</af:richTextEditor>
</af:dialog>
</af:popup>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks in advance.
Hart
Message was edited by:
harth
Message was edited by:
harth

Cost Distribution - Infotype 0027 and 1018 cost distri in OM

Hi All,
Whats the difference in functionality between assigning cost center in
"Cost Distribution - Infotype 0027 and 1018 cost distri in OM"
One in employee leven and 2nd in position level, but the concept is same i think,
Also if we assign cost center in department wise, can we identify the cost in individual employee level?
help
Rx

Hi Rx,
There is no difference.
The system reads cost data by following path:
1. read IT 0027
2. if not found in IT 0027, read IT 1018
3. if not fount in IT 1018, read IT 0001
So, yes it is possible to overwrite IT 1018 via IT 0027.
Cheers!

Create/enable field prznr in infotype (0027)

Dear experts, I would like your help in this case:
I need to enable (create) field in infotype (0027) Apportionment of costs Unfortunately this field is not showed up in the structure and vision in the table Q588M. Need to know how can I create / enable field PRZNR business process iin this infotype - 0027
Thank you

Hi..
If u want to create new field then u can modify the infotype by using PM01.. and there u can write the field whatever you want in CI_Include...
This is the best solution I feel..
Regards,
Rahul Gupta.

Infotype records of infotype 0027 can not be edited.

Similar Messages

Maybe you are looking for