Initial Download Issue : CUSTOMER_MAIN

Hi,
I am downloading the customers from the R/3(ECC6) to CRM 5.0.
I have done the PIDE settings in the R/3 and the groupings in the CRM.
The customers are getting downloaded to the CRM system correctly also.
But the ISSUE is with some of the account groups.
Ex. I have account group ZPR which is mapped to the ZPR group in CRM.
The customer XXXX which is getting downloaded to CRM as YYYY as i have configured it as external number.
In the Identification Tab of Tcode : BP.
A field for The External BP number and also a table control which will have the CMR002 as the ID type.
The R/3 number is getting populated correctly into the table control with the ID Type : CRM002 and the Identification Number as the R/3 customer number(XXXX)
But the External BP number field is not populated correctly.
This is happening only when i download bunch of customer with the filter on the account group.
If i initial download one customer at a time then the External BP number and the ID type and Numbers in the table control are comming correctly...
What could be the problem to get uncorrect number in the External BP number when compared to the ID type and the Identification Number?
Any config isssue ........
Pls advise.
R

Hi,
Thats strange.
What i would suggest is, to check if any Middleware User Exits are on for BP transfer.
If not, then this means the standard code aint working properly.
In this case, you should raise an OSS to the SAP.
Reward with points in case helpful.
Sharif.

Similar Messages

  • Initial download of CUSTOMER_MAIN

    Hi
    We are performing initial download of Customers from ECC To CRM.
    We set filters on CUSTOMER_MAIN Object and performed the initial download.
    Due to the filters, none of the customers downloaded into the CRM System as all customers got filtered out.
    Now we deleted some of the filters from the CUSTOMER_MAIN Object and tried to perform the initial download. but still no customers are downloading into CRM.
    Can anybody provide us with help.
    Thanks in Advance
    Regards
    Rekha Dadwal-Shet

    Hi Rekha,
    Did you find any solution on your issue? I am facing the same problem.
    I would appreciate if you can share your solution.
    Thanks,

  • Errors in Initial Download of Customer_Main from R/3 to CRM 4.0

    Hi
    I came across couple of errors in BDOc validataion while downloading CUSTOMER_MAIN.
    I had downloaded all customizing objects listed in help.sap.com, but i still got errors like 'region not defined for country' and 'tax category does not exit'.
    Can these errors be rectified by downloading customized objects likeDNL_CUST_TAX and any other.
    Here are couple other errors, I am unable to understand the context of these. Can anyone tell me what its saying and what corrections can be done.
    1. The use of the last 10 characters in field SORT1 is restricted (19 of 20)
    2. The use of the last 10 characters in field Search Term 1 is restricted (>10 of 20)
    3. Grouping  has external number assignment, enter the nuber.
    Any help is greatly appriciated.
    Regards,
    Jay

    Jay,
    R/3 should have a customer number, because the number is used as the key in table KNA1. There's probably an error in the mapping of the R/3 customer number to the CRM number.
    Check out table CRMKUNNR in R/3 (which should contain the mapping between the R/3 number and the CRM guid)
    and table CRMM_BUT_CUSTNO in CRM (which should contain the mapping between the guid and the business partner number). If these entries are inconsistent (like an empty field for customernr.), they must be corrected.
    If not, check the bdoc and find the entry where a guid is present, but the number is missing.
    Let me know how it turns out,
    Michael.

  • CRM2007 - Initial Download - how to download the BP of the ERP to CRM

    Hello guys,
    I'd like to know how can I make sure that the Business Partners - which are already existing in ERP - are created in CRM as well ?
    Is there customizing flag during the Initial Downlaod?
    Thanks a lot for any helpful comments.
    BRGDS
    nicholas

    Hi Nicholas,
    What should be ensured is:
    -whether the initial download was finished successfully
    with green light in r3am1 transaction?
    -whether all the related inbound and outbound queue has been processed without error?
    smq1 and smq2 in both systems;
    -whether all the bdoc are with green status
    transaction smw01
    And there is a tool SDIMA, which can be used to compare the master data between systems, and find the inconsistency and fix them.
    Customizing flag? what kind of flag are you interested?
    Initial download object CUSTOMER_MAIN
    Hongyan

  • Issue in Initial Download R/3 and CRM

    Hi,
    I am trying to do an initial download from R/3 to CRM. But I get a "SYSFAIL" status. On checking the transaction SMQ1 on ERP side, I see that RFC destination point to self for which the connection type is "I" i.e. Internal. I also tried to change the RFC destination, then it gives a message "No LUW exists in the Specified Queue".
    I have referred to the note number 588701 and checked everything is fine according to that note.
    All necessary entries have been maintained in CRMCONSUM, CRMRFCPAR. the queues have been registered correctly. Entries in SMOEAC transaction are also checked and they are fine.
    Please guide me here.
    Harsh

    The issue has been resolved after applying note 760518 as R/3 was a system copy and a wrong entry was maintained in the table CRMPRLS.
    Note: Please get in touch with your admin or an ABAP coder before applying this note.
    Harsh

  • Problem with initial download of a data object

    Dear All,
    I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
    I have selected the following as the BE Keys in the nodes.
    SERIAL NO in EQUIPMENT header node.
    TYPE in DETAILS node.
    ZIPCODE in LOCATION node.
    In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
    In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
    Data object contains no errors and i have activated the data object and it was successful.
    Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
    Now i have triggered an initial download for the  "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
    So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
    Regards,
    Kiran.

    Hi Kiran
    Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration?  The logs should have the proper error.
    If not can you regenerate the DO, edit and activate your adapter and try again?
    Regards
    Rohith

  • Error: Initial Download of Materials

    Hello,
    I came across these errors with initial download for materials. I had downloaded relevant cutomizing objects, dnl_cust_prod, -prod1, -prod3, -plnt etc.
    Pls suggest any resolutions for the issues listed here.
    1 Assign product &1 to a category from hierarchy &2
    2 Data on set type & cannot be maintained
    3 Logical system &1 does not exist in table TBDLS
    4 Category for R/3 product hierarchy & does not exist
    5 No descriptions exist for product &1
    6 Enter a base unit of measure
    Issues:
    2. Set types 'COMM_PR_MAT' and 'BBPM_PR_GENERAL'are missing in CRM. Can these be entered manually in CRM. These set types were not created in CRM with customizied download of objects.
    3. Does logical system name and RFC destination name has to be maintained same?
    4. Can the specific category be created manually in CRM. OR does it have to be done with cutomized objects download.
    5. Description is given in R/3 for the product
    6. Is the 'base unit of measure' different from 'unit of measure'. How to specifically maintain 'base unit of measure' in CRM
    Your help is greatly appreciated and rewarded.
    Regards,
    Jay

    Hello Sebstian,
    First check the B doc status in  T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
    business obj material in t code R3AC1.
    Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
    I hope it will help you
    regards
    naren..

  • Mat. for Initial Download: Table not supported by function "C_"

    Hi All,
    We are in SRM 5.0 & ECC 6.0 with Classic scenario. While uploading the MATERIAL through R3AS, we have the "Mat. for Initial Download: Table not supported by function C_" & "No product ID determined for material number ... of logical system" error in SMW01.
    In SMQ2 in SRM, Queue is blocked with "Error in Mapping (Details: transaction SMW01)"
    For your information RFC Users at both the ends have SAP_ALL authorisation. SAP Notes 720819, 420980 & 432339 are implemented.
    Please guide me to resolve this issue.
    Regards
    Ashutosh

    hi,
    How was the issue resolved , i am having the same problem.
    can somebody provide with clue
    regards

  • Middleware - No BDOCS created for Initial Download

    Hi Middleware Gurus,
    I am facing a MW problem and don't have a clue as to why. So, can i please have your inputs.
    I am trying to download object - CUSTOMER_MAIN in R3AS in CRM after setting the necessary filters. In R3AM1 status is running and  there are no BDOCs generated. when i check Queues, in R/3 SMQ1 there is an outbounc queue to CRM - i push it and in R3AM1 i get status green indicating a successful downlaod- without any BDOCS!
    In CRM BP i don't see the downloaded BP. Also there are no errors whatsoever in the system. Checked SMWP and SMWT which indicate that CRM is trying to receive the data from R/3 but failing to do so, why no clue. The same exercise was done for BUPA_MAIN and got the same results.
    Also, our basis guys tried to do a delta download, which created BDOCs albeit failed ones as the BP GUID does not exist in CRM for that BP. But i guess that intial download and delta download troubleshooting are two different issues alltogether.
    I followed SAP note 429423 to check my MW settings and did not find anything amiss. What could be the problem?
    Please help.
    Thanks a lot in advance

    Hello Shillo,
    Check the filter settings for download objects in txn:R3AC1.
    Check txn:SMQR to make sure all queues are registered.
    Check table CRMRFCPAR in R/3 to make sure that data is getting sent to your CRM system and client.
    Check if any BDoc is coming in txn:SMW01.and double click on the BDoc to check for the data.
    Also,click on icon Errors/Receivers to check for any error.
    Hope this helps!
    Regards,
    Shanthala Kudva.

  • Initial download from crm 5 to ecc 6

    Initial Download of ECC 6 customer_main to CRM works well but mapping of bupa_main from CRM 5 to ECC 6 didn't work.
    In R3AS I got an short dump:
    GETWA_NOT_ASSIGNED_RANGE
    So I tried CRMM_BUPA_MAP to send single customers and I got that error.
    Partially send, receivers have errors:
    I have checked all the fields in the ecc6 settings and crm5 also.
    it is very urgent bec. iam at client side.

    Hi Devi,
    Ya now its clear. So basically you are dealing with the data exchange between the R/3 customer to CRM business partner.
    As you mentioned that the CUSTOMRE_MAIN load is successful
    and that means you have already done the account group to calssification mapping in R/3 transaction PIDE from R/3 to CRM. Pls check the same transaction for the data flow from CRM to R/3. Also check the number range assignment. For more detail check the best practice guide C03.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Initial download DNL_CUST_CNDALL failed

    Hi,
    I am doing initial download of DNL_CUST_CNDALL from ECC6 to CRM7.0. it was shown as as successful in R3AM1 but no data was transferred. When I checked in SLG1 and CND_MAP_LOG_DISPLAY it shows the error message " Value correction USE_NAMESPACE in table /SAPCND/T681 failed"
    Any idea what could be the problem. RFC connection etc are working fine as i could load some other object.
    Thanks in advance for any help.
    LK

    Hi Luvkush,
    CRM table /SAPCND/T681T is a text table for table /SAPCND/T681. In the R/3 system, the corresponding text table T681T has a key field SETYP which no longer exists in the CRM table.
    If these records are exchanged between the R/3 OLTP system and CRM system, the system updates that record with the first SETYP value which occurs in exchange object, generally, this is inital, and all other records can no longer be updated due to identical key and system issues the error.
    You can also refer to note 314315 for detailed understanding.
    Hope this helps you.
    Regards,
    Madde

  • Material download issue

    Hello Experts,
    I am facing typical material download issue, please help me out to overcome this:
    - material number in ERP has lot of speical characters say e.g. - : =
    - DNL_CUST_PROD0 / PROD1 / PROD 3 / TAX all has bee done
    - Materials are already downloaded
    - When I tried to download new materials from ERP to CRM(missing) I am getting error: as "Mat. for Initial Download: Function table not supported" ; additionally I am also getting tax sequence for country CA, but in ERP no tax classification maintained for CA for particular material. Also no data available in TSTL, TSKD etc..tables.
    Pleas let me throw your thoughts here.
    Cheers,
    Bobby

    Hello Bobby,
    Corrections present in note:1121999 was due to program error.
    Did tax customizing error still present?Did you run txn:CRM_TAXCUST_VALIDATE.
    Check the error tab of the Bdoc and see can you get any hint?Also,does the BDoc contains Data or its blank?
    Its very difficult to know the cause unless having look into the system and debugging the issue,
    Regards,
    Shanthala Kudva.

  • Trying to be sure I have latest versions of Lightroom and Photoshop (I am on monthly subscription plan).  After I sign in - told I need "administrative privileges to continue."  The initial downloads went without any problem.

    Trying to be sure I have latest versions of Lightroom and Photoshop (I am on monthly subscription plan).  After I sign in - told I need "administrative privileges to continue."  The initial downloads went without any problem.  I am not sure what to do next.  My computer is at home.  It is a new iMac.

    Are you using your Mac with an Administrator account?
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Initial download taking time in syclo inventory manager 3.2

    Hi experts,
    I am new to SYCLO world.  We are using SYCLO Inventory Manager 3.2. We are having an issue with it. Initial Download is taking so much of time to download the complex table CTParts. As shown in the attached snapshot it is downloading 1000 records at a time.
    Is it possible to increase this number? If yes, where i have to make the changes.
    Does the above changes will be helpfull to improve the initial sync performance?
    --Garima
    Tags edited by: Michael Appleby

    Hi Garima,
    You can refer to below SAP note available on complex table performance, Look at the Reducing Download Time section of this note.
    1918717 - Complex Table Client Storage and Benchmark Information - Agentry
    Regards,
    Abhishek Wajge

  • Initial Download CRM 5.0

    Hi together,
    tried to start initial download CUSTOMER_MAIN
    from mysap erp to crm 5.0. All queues looks ok and
    status is green. But the BP were not transfered so I checked the BDOC's and found the following error.
    Error Message:
    Enter at least one number for the business partner
    Area:
    R11
    Any idea? Thanks

    Hi Jenny,
    Please check the number range settings in CRM as well as R3. This error says that u have a external number range assignment in CRM and the BP coming from R3 does not pass the BP number.
    Please check number ranges in both systems according to grouping....
    Regards,
    Ajay Gupta.
    Reward points if it helps.

Maybe you are looking for