Initial Entry for Exciseable Material

Dear Experts ,
I want to make an initial stock upload for the excisable material throuch 561 mvt type.
WHAT SHOULD I PUT IN EXCISE TAB AT HEADER LEVEL ??
As there is no excise invoice for the initial stock & there is no Capturing of the Excise duty , CAN I USE NO EXCISE ENRTY FOR IT ??
pls reply
Regards
Anis
Edited by: anis bazmi on Jan 23, 2009 1:26 PM

The material is excisable , FERT / ROH / ERSA etc . the tab appears owing to J1Id details that are bieing maintained .
Suppose I do a GR with 561 for an ROH which is excisable (RG23A) , what shud i select in the Excise Tab at header??
1. Caprure & Post Excise
2. Captute only
3. Part 1 Entries Only
4. No excise entry.
Pls not i am loading lumpsum stock of the material as initial entry . There is no specifuc excise invoice associated with it . Further there is no duty that we take credit on ( RG23A part 2 is updated separately thro table entry ) .
So . Should I use NO EXCISE ENTRY???
OR
SHOULD I USE PART 1 ENTRIES ONLY ??
PLEASE NOTE : In any case ( part 1 only / No excise ) the RG23A part 1 register gets updated .
Pls clarify

Similar Messages

Any notes for this issue 2 entries for 1 material while searching material

Hello All
Internal goods and services
search material which has more than one UOMs.
When i search material for internal goods and services i get two entries for one material . i know the reson why it dispalys two same items since it might have alternate UOM but however you select any one of the item it will be order unit only as UOM.
Why SRM system showing two enties for one material with same item . enduser may dismay what item item needs to select.
this must be protected right? Any suggestion not to show tow items while searching one material.
Clue:- MARM - ecc table has Alternate UOMs entries fort he material. Any one is facing this problem ?
br
muthu

Hi. I just tried it on our SRM 4 system (I know it's old, upgrade soon hopefully) and I can see the alternate UOM in MARM and also in SRM in COMMPR01, but I only get 1 hit in the search help.
Are you sure you haven't got the same material replicated twice into SRM from 2 different backends or something? Can you see the logical system in the search? Check table COMM_PRODUCT to see if there is more than 1 entry for the material maybe?
If it is the same system and the UOMs causing the problem It seems a bit odd that SAP would introduce this on a new system, have you tried raising a message with them?
Worst case you always have the BBP_F4_READ_ON_ENTRY / BBP_F4_READ_ON_EXIT BADI's.
Regards,
Dave.

Maintain MARM entries for MPN material

Dear All,
We have a requirement of maintaining the Alt. UOM for the MPN material in the MARM table by deleteing the existing entries & overwrite the UOM from Parent material through LSMW. But the issue is basic data view is not supported in the MPN material, so we are not able to add or delete the MARM entries for MPN material
Has someone come across this issue earlier, or if someone can suggest any clue would be quite helpful.
Regards,
Pankaj

Dear,
Check these links which explains in detail:
http://www.sap-img.com/materials/maintain-relation-between-alternatives-materials.htm
http://help.sap.com/saphelp_di471/helpdata/en/75/ee15e055c811d189900000e8322d00/content.htm
Regards,
Syed Hussain.

MIGO for Exciseable material..?

Hi all
Can any body tel me , i have created PO with exciseable material, and while doing MIGO under excise tab i m not getting the below things
1.Capture and post excise invoice
2.Only capture Excsie invoice
3.Refer only excise invoice
4.Only part 1
5.No excise duty
The above configuration setting where to do ???
For for some PO, only few are coming , how come , there is any configuration setting materials type wise or vendorwise or chapter id wise or vendor wise ..??
Thanks
SAP-MM

hi Sujoy
Thanks for ur quick response
I have checked in Excise group setting and it has been not ticked .
I think i can mark tick in all boxes lik
EI capture
Post EI in MIGO
Duty differenc at GR
EI create/RG23D selection
Update RG1at MIGO
And more query , what about other thins lik ,
Refer only exciseinvoice ..??
Only part1 ..???
Noexcise entry..???
Can u tel me wht are the configuration setting has to be done ..???
Thanks
SAP-MM

Creating Initial Stock for a material

Hello Experts,
Can you please let me know how to create some initial inventory/stock for a material in a storage location?
For eg: I have material MAT1 in Storage Location LC01 in plant PL01 and it does not have any stock. I want to create some stock for this material in storage location (LC01) for the plant (PL01) for testing purposes.
Thanks a lot for the help.

Hi,
If this material is internal manufacturing then you have to create a process/production order(COR1) and release it and confirm it and perform Goods Receipt(101).
If the material is externally procured then you have to create Purchase Order(Me21N) and receive against it in MIGO.
You can take help of your functional consultants to perform these transactions.
Hope this helps.
Thanks,
Ramesh

Initial entries for table USR40

Hello,
i'm trying to find out if exists a download list for initial filling of table USR40. Does anybody know a download list and can help me? Thanks.
Best regards,
Helmut Schröder

Helmut,
Things to be kept in considered while populating this table are : -
1. Insert your company brand name/product name.
2. Insert SAP standard keywords.(abap, replace)
3. Insert SAP components name (portal etc)
4. Insert the hardware components name seen around your system.
5. Insert popular movie titles, book titles, actors, actress names etc.
6. Insert car names.
7. Insert word initial
8. Insert word sap123 and such other general words.
and any other which you think one can easily guess and get access to the system.
Thanks,
Sri

Help neede to get Cost Itemization for a material

Dear All,
I am developing one report for Cost Component Details. First of all I Fetch Cost Estimate No for the Material from KEKO table then I search KEPH table for its Cost Components here i get 2 entries for a material one is for UPPER LEVEL and One for LOWER LEVEL. And after that i use "BAPI_COSTESTIMATE_ITEMIZATION" to get itemization but my problem is that i am not able to find data for LOWER LEVEL Components. I want both UPPER & LOWER LEVEL itemization for the particular material so i can match overall cost.
So, can anybody help me in this matter.
Thanks in Advance,
With Regards,
Mudassar Praniya.

Solved.

Initial entry stock (561) is valuated for non-valuated material

Hi Gurus,
I am doing initial entry of stock balance (MvT 561) for several non-valuated material. But when I check the table MSEG, I got status of "X" in the field MSEG-WERTU, which mean the material is valuated. The consequence is the value is updated, so I get inconsistency in stock (stock value is updated, table MBEW)
So how can I can get valuated when I done my first initial entry of stock balance for non-valuated material?
How can I trace, where did I go wrong?
I have checked these:
- I checked the material type, and it is properly configured (quantity update only).
- No changes have been made in the material type.
- No changes have been made in the material master data.
Please help, and thanks!

Hi,
Please refer the below links....
MB1C 561 With no Financial accounting Document created
Valuated material to Non valuated material movement
I am getting accouting Document when I do GR
Regards,
Udaya.

Checking the initiality of the fields while creating entries for a table

While creating entries using table maintenance generator(TMG) i need to check the initiality of the fields.Are there any such events?
I know i can go and change in the screen by making it mandatory or by writing a module in the PAI of the screen of table maintenance generator. Both of cases i have to change the TMG which is generated by SAP system. I want to know is there a way to achieve this with out changing the TMG possible events?

hi rahul,
as far as i know, you have to do your initial valifdation in TMG and you have to change your TMG. However, if you have checked the initial flag while defining the field, you will not have initial value for that particular field.... (if the field is key field, by default it is not initial)
hope this helps....
thanks and regards,
tanmaya

Accounting Entry for Material has Standard Price

Hi,
If Material has standard price option, what is the accounting entry for the time of Direct Goods Receipt and from the production.
Material Value is : Rs. 100/-
Purchased value is : 90/-
from production : 110/-
Thanks in advance

Hi,
In STO, material posting with price valuated from issuing plant price. In your case, the transportation cost, you can capture to separate G/L account and pay to transport vendor.(In STO , one plant is vendor and another plant is customer, so a third party vendor involved for material transfer)
OR else use separate own Custom Condition Type with Special Condition Category instead of condition type P101 which have Condition Category "G", only responsible to pick the internal price
Regards,
Biju K

Palnning entry not generated for the material

Hi,
We RUN the MRP with MD01, but for for some material the PR are not generated, with MD01 I checked the palnning file with MD21 there is no entery for that material but when we RUN single level MRP with MD03 for that material it creates the PR so what can be the problem as for some material the PR are not generated with MD01 but it generates with MD03 all MRP data is proper in material master.
regards,
zafar

Hi,
Generally the planning file contains a list of all materials which has a valid MRP type in material master and relevant to the planning run. As soon as a material master record is created with valid MRP type, it will be automatically included in the planning file. You can find it in transaction code MD21.Whenever system find MRP relevant transactions i.e Stock updation,Receipt,Issues etc it will be included automatically in Planning file with appropriate indicator(NETPL,NETCH etc.).
Only in some exceptional cases, it is necessary to make an entry in the planning file manually.For an example after run MRP ,that material relevant Indicator will be removed. But still if you want to force it for next MRP run,you can include it manually..
And Please also check in material master entries properly maintained or not.
Kuber

GR COCKPIT Mulitble entries for material using 'BAPI_GOODSMVT_CREATE'.

Dear Guru's
In my program first they given some input values to the selection screen include material number as parameter .
Now the reqirement is they want multible enteries for material not in selection screen after given inputs run the program and one more screen is appears (this is created my using screen painter) .
In that screen I had 5 columns in that screen .But I needed one extra column that's why I added one extra column (ie, Material) through screen painter .I am using the 'BAPI_GOODSMVT_CREATE'. in that srceen 3 columns we have to give the input manually,whereas before adding that particular column we had to give inputs for 2 columns.(using fields are ENTRY_QNT,ENTRY_UOM in the structure BAPI2017_GM_ITEM_CREATE)like that we have to give input for 3rd coulmns also that we just created.but the problem is there is no such field in that BAPI for multiple material numbers.But its works for multible entries with same material numbers
My Screen Previously like:
1.Farmer 2.FarmerName 3.Collection Pt 4.Quantity5.UoM
After Adding one extra column the screen looks like:
1.Farmer 2.FarmerName 3.Collection Pt 4.Material Number4.Quantity5.UoM
But the probelm is BAPI is not running for different material numbers but its work for same material number with multible entries too.
While i am trying to run the program i will get "Deficit of BA Unrestricted-use 28,000 KG : 40950020 BP01 2118 0000001526" but there is stock for this material .
Please provide a solution for me.
Thnaks
Poorna
Edited by: Purnaneelu on Mar 30, 2009 11:19 AM
Edited by: Purnaneelu on Mar 30, 2009 11:35 AM
Edited by: Purnaneelu on Mar 30, 2009 1:42 PM

helpful

Accounting entries for initial stock upload (URGENT HELP NEEDED)

Dear all,
I wanna confirm following are my accounting document entry kindly confirm if it is right.
CO.Code Itm PK SG Account Description Amount Curr.
2000 1 91 235199 Balance Upload Account 12.000,00- SAR
2000 2 86 411520 Price Difference Acc. 1 2.000,00 SAR
Can any one confirm me that my entries are correct or not??????????
Regards,
qsm sap
Edited by: qsm sap on Feb 12, 2008 7:41 AM

Hi,
For loading HALB or FERT items (Materials with Price Control S)
correct way is to run Standard Cost Estimate and then Upload the stock with Qty only , here system will take the Standard price from the material master,
In the a/c entries you have written it appears that Material is of "S" type and price is maintained as 0 (Zero) in master that's why all the Intial stock value has gone on to PRD account,
If you are not using standard Cost estimated (or not in a position to do that) but still have the correct stock qty and value with you, what you should do is :
Change the price control to "V"
Load the stock with qty and value, (system will calculate MAP and update the Material master),and there is no question of hitting PRD account
After all the Stock is uploaded for the material , change the Price Control to "S"
system will take the prevailing MAP at this instant as Standard Price for all future transactions

Material entries for cenvattable and cenvattable goods

Hi SAP GURUS,
I am using one material for different fgs. In some cases cenvat credit is available. In other cases there is no cenvat credit available.
How the accounting entries will flow in both cases.
Thanks
Cheers

Dear,
Entries at the time of MIGO-
Stock Account - Dr
GR/IR Clearing A/c - Cr
At the time of J1IEX-
CENVAT Input BED - Dr
CENVAT Input ECS - Dr
CENVAT Input SECess - Dr
CENVAT Clearing - Cr
At the time of MIRO-
Vendor Account - Cr
GR/IR Clearing A/c - Dr
CENVAT Clearing - Dr
When there is no CENVAT for the material then the entry will be..
At the time of MIGO-
Stock Account - Dr
GR/IR Clearing A/c - Cr
At the time of MIRO-
Vendor Account - Cr
GR/IR Clearing A/c - Dr

Gate Pass Entry for material

Dear Forum,
At my client's place if any material like Alternator of Motor is going for repairing or Overhauling purpose they maintain the data in Gate pass format manually..But now they want to do it in SAP...
The details are as follow--
1. Vendors Name, Address
2. Material, material description
3. Returnable/Non-Returnable material
4. Prepared by etc..
Is this possible with Std SAP..?? or do we need to have any ABAP development...
Please do the needful..
Regards
Nainesh

For any type of material document printout you can follow the process:
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
Enter the local printer where you want to print your Goods posting document
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE/WA, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately
Now for the need of what are the data you want in the printout you have to sit with your ABAP er and decide.
regards,
Indranil

Initial Entry for Exciseable Material

Similar Messages

Maybe you are looking for