Input currency GBP inconsistent with preferred vendor currency EUR for the

Hello Experts,
We are facing the below issue while creating the Shopping cart in production.
"input currency GBP inconsistent with preferred vendor currency EUR for the line item 00001" .
the same scenario we have replicated in the lower system, there we were able to create SC. we are using classic scenario.
We have also checked that vendor currency in the backend system. everything seems to be fine.
Please provide your valuable inputs.
Regards,
Santhosh Kumar. G

Hello All,
Issue has been resolved.
There was a small mistake in the program.
Regards,
Santhosh Kumar G

Similar Messages

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

Using the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?

I am intending to upgrade to photoshop CC from photoshop CS6, my concern is is my computer is 6 years old and probably I will not be able to upgrade to a later mac operating system as I have mac os 10.9, and I may not be able to upgrade to a future version of photoshop, will I be able to use the current version of photoshop CC with Mac OS 10.9 for the next 5 or so years on same mac?, I know I can do this with Photoshop CS6.

There's no reason why you can't do both. You will always have CS6 to fall back on if the need should ever arise, the same as most of the regular posters here. But you could enjoy CC for as long as it suited you, and it has some very features and more are coming all the time.
We've seen two nice updates to Photoshop CC in the eight months since the subscription model went live. (Have I got that right?) So we can expect three a year or more, and there were some killer new features in 14.2. Heck, it would already break my heart if I had to go back to CS6. In another four years... It ain't gonna happen.

I have an iMac5,1 with an intel processor. For the last month or so, whenever I play a video from an outside source - e.g. YouTube, the picture jumps and breaks-up. All of my software is up-to-date. Any thoughts on how to fix this problem?

I have an iMac5,1 with an intel processor. For the last month or so, whenever I play a video from an outside source - e.g. YouTube, the picture jumps and breaks-up. All of my software is up-to-date. Any thoughts on how to fix this problem?

You're welcome. As to checking speed go to http://speedtest.net/ and it will choose the closest server for you. BTW, whatever you do, don't click on the robot icon that says "Start Scan" or MacKeeper below that. Only use the speed test in the middle that has the button BEGIN TEST on it. It will run a download speed test first and then an upload speed test. The download test will give a much faster response.

'The termination occurred in system E03 with error code 403 and for the rea

hello gurus,
i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
Service cannot be reached.
'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
for this we need to activate some service at sicf transaction level.
could anybody suggest me which service i need to activate to overcome my problem.
best regards,
raja.

If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
First check above one.
this is for understanding
http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
Regards
Srinivas

After ios 8.02 update iCloud Drive is stuck in a loop that reads "upgrading" with a spinning wheel spokes for the last 48 hours.

After ios 8.02 update iCloud Drive is stuck in a loop that reads "upgrading" with a spinning wheel spokes for the last 48 hours.

There's a solution posted here that may work for you: iCloud Drive won't stop upgrading.

Automatic PO with preferred vendor

Hi all.
We Have SRM 5.0 ECS
I need to generate an automatic PO from a SC, this contains like source of supply the Preferred Vendor and price, in this type of purchase I do not use contracts
This is possible?

Hi Raul,
As it is clear from your statement that you are not using Contracts and you are talking about Free Form text Shopping Carts where you can enter Prefferred Vendor. You need to implement Doc Change BAdI to convert this preferred Vendor to fixed Vendor so that after approval Shopping Cart creates a PO.
Here is the sample code we had implemented for the very same purpose
BAdI BBP_DOC_CHANGE
METHOD if_ex_bbp_doc_change_badi~bbp_sc_change.
data: ls_partner type BBP_PDS_PARTNER.
loop at et_partner into ls_partner.
    if ls_partner-partner_fct = '00000039'. "Preferred vendor
      ls_partner-partner_fct = '00000019'. "Fixed vendor
      modify et_partner from ls_partner.
   endif.
endloop.
ENDMETHOD.
Thanks
Shrini
Award full points if this helps.

Prefered vendor not displayed for shopping cart

Hi,
We have PDP scenario, SC's originated from R/3 purchase requisitions,
Issue details:
1. P.req was created with desired vendor and transfered to SRM and corresponding shopping cart is available in SOCO.
2. User created Held PO for corresponding SC.
3. When user checking monitor shopping cart then preffered vendor not displayed in source of supply tab.
When i checking BBP_PD for shopping cart, i found there is Disable flag(X) has been set for NO inbox selection partner.
what could be it mean, and more ever this changs has been originated via RFC user.how it was getting RFC user
Please advice me....

Venkateshwar
SC is generally sent to SOCO only when sourcing has to be carried out for the SC. IN this case you are hving a desired vendor in the SC and then you are creating a pO for the same. Although you have a Vendor in the PO that does not mean that SC will also have same vendor as preferred vendor in SC after you created the PO....
Regards
Virender Singh

A report to exchange currency SIT -- EUR for the wage table T510

Hello,
I need to change the Slovenian currency SIT to euros. There are already entries in the table T510 and in infotype 0008 Basic pay.
Is there a report how to carry out the currency exchange or do I need to manually create new entries for the table T510?
Even if I manually create new entries in euros, how can I handle the existing entries? If a person already have entries in the Basic pay and the wage types and amounts are in SIT --> how to show them when the currency should be euros now. Is there a method to change history data (from year 2007).
There is no payroll neither archiving.
A prompt answer is highly appreciated.
BR,
Pia

Hello,
Unfortunately the link you send me is not valid. At least I cannot see any mail. All I see is: "The specified thread [0] was not found."
BR,
Pia

Problem with MR90 transaction: printing invoice for the vendor

Hi Friends:
I've got a ticket & I need your help to resolve it.
When the user is paying the invoice, she then goes to MR90 to print the invoice to sent it to the vendor and there is no amount showing.
An invoice is paid via MRDC ( automtic invoicing). TCode MIR4 - 5105616046 to see vendor invoice in reference to a Purchase - planned freight costs. If you click on follow0on Documents you will see the posting in FI. So in MR90 - processing mode 2 - Repeat processing, the amount of this invoice should be pick up and it is not.....
Why it is not pick up? There must be a rule somewhere. ..
In the program of MR90 - transport cost - I want to know where the amount is pick up and is there a condition for it to be display ( date, hour, etc. in regards to something else).
Can anyone help me on this....................What kind of settings should be done to get this picked...
Friends..plz help me on urgent basis....
Suitable points will be rewarded....
Regards:
Gaurav

Dear
Provide the exemption dates for the vendor, whenever you need to post the TDS delete the dates and post the Invoice with TDS.
Regards,
Dharma Rao.

2 Weeks With My Z10 And Wishes For The Next BlackBerry

Verizon BB Z10
Hardware :
I have in my possession BB Z10 from Verizon and Q10 from international carrier also Z10 from AT&T. I try to compare my own personal Z10 with the others including my Verizon Galaxy note 2, Droid Razr MAXX , iPhone 5 and Lumia 920.
My Z10 is very comfy on my hand. 1 hand usage.. I still prefer 1 hand usage for phone.. and for iOS user who switch back to BB Z10, It feels just perfectly placed on my palm
Usage:
My personal usage of cellphone is heavy duty emails/texts/web browse with basics entertainment such as netflix and youtube and including but not limited to using notepad and some C++ editor/compiler on my android. In this test I limited it to personal usage only and work related(texts,emails,games)
Early Usage :
The initial usage of my Z10 was very weird. it took me 12hrs of charging from 20% to full battery. Next cycle took me 8hrs and after that it took me about 4hrs 53mnt - 5hrs 15mnts give or take. The charging time awfully took a long time. I tried to resolve it with the Verizon customer service but they also did not have any idea as of why and what cause the phone to took some awful long time to charge the battery. Oh well I could live with it.
2 Weeks After :
- 3days into usage I got into random reboot problems that confirmed by BB support team is due to my OS 10.0.9.422. The support said it was a known issue with that OS and fixed with update of OS 10.1 which they said it was up to Verizon to push it out(no news whatsoever about the update from the Big Red Dracula Team).
-Prompted to install previous OS when connected to Link Desktop Software but prompted to install newer OS when check through OTA update
-Battery charging issue still plagued my phone until this time
-Sudden Reboot when opening heavy loaded website or bombarded by emails, texts and whatsapp all together
- Facebook is another Horror Movie come true... messages not sent, messages late came through or the notifications won't gone even when we already checked it. If that happen I must open my Facebook app to check it again. So what's the point that it linger around in the hub??
- Incompetent answer by the carrier customer rep as how to resolve my issues and problems.
-docs open swift and no problem
-Save screenshot or image from the item cannot be save directly to memory card.. Instead I must work around the system to save it to my phone and moved it to my memory card. What is the point..
Conclusion :
For a person who came from iOS and android I actually quite surprised and pleased. After given consideration for a while I realized that AT&T support for the BB platform was actually better than Verizon( I owned BB 9900 and 9930 previously also). It was too bad that my Carrier(Verizon) did not support BB10 all through the way. BB10 is a very solid platform who still keep the main purpose of work functionality in their platform. iOS, Lumia and Android evolved to mainstream system, that I felt personally, put forward in media and games too much in their system.
BB10 is simple and easy to use but also have the media/entertainment aspect as a side compliment to it and not the way around. Too bad that carrier like Verizon is very very SLOW to push update and support for this platform.
WISHES :
I sometimes still like to use my Droid Razr MAXX. I could dock it at my home/office or bring the lapdock with me to make it a full laptop during my meeting. I do not need a tablet since my phone replace everything in one device. Tablet as convenient as they are.. will never replace my All-In-One Droid Razr Maxx. I wish BlackBerry will come out with this solution(e.g www.casetop.ca). A market that no one seems to grab as solution to work enviroment. Phone, Laptop and All Round Personal Computer at home also..
wish good luck for BlackBerry team.. Good job.. Good job indeed..

Oh I've seen the ACK message also. Sometimes your power source may intermittently not deliver the power needed and that message is generated. Usually if I see that I unplug and re plug and all is well.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issue with transferring calls to VM for the correct DN Unity Connection 9.1.2

Hi all
I have been facing an issue with a Unity Connection Server v9.1.2. Every time an internal extension (assigned to VM profile and to Unity as a user) which is configured to be transferred to VM after 20 sec or so NoAN,is called , Unity treats the call as the extension of the calling party and not the called party. Furthermore , I dont know if this has any relation with the problem I am facing but when I check the voicemail port status in RTMT its seems like that regardless it is a direct call to the Unity from an extension (dial the pilot number or press the messages button on the IP phone) or a redirected call from an extension to Unity due to NoAN configuration, the Reason is Direct and the caller party number is always the extension initiated the call and not the one redirected to the Unity (second case).
I have changed the Use Last (Rather than First) Redirecting Number for Routing Incoming Call Unity parameter in the
System Settings > Advanced >Conversations -> checked and
Redirecting Diversion Header Delivery - Outbound CUCM parameter ->checked
in the SIP Trunk configuration used for the integraton of the CUCM with Unity but none of those seem to address this issue. Is there any guidelines you can give me to overcome this issue?
The servers I am using are
CUCM v9.1.2 BE
CUC v9.1.2 BE
Thank You in Advance

Hello again,
The Voice Mail Box Mask was blank before. However I tried XXXX (I use 4-digit extension for the VM pilot) but this did not seem to fix anything to the system....Same situation as before. Any more suggestions?
Thank you

Update book inventory with NEW company code assignment for the same site

Hi gurus ,
Our company have this business scenario:
the site has run in Company Code A for several month with business of Material Management function, then the site have to be changed to Company Code B for financial requirement .
What we want is we change the CC assignment by OX18 for site master without changing the site number (creating a new site master ),except for the open purchasing or sales document clearance , is there any way we can update the book inventory with new profit center corresponding to the CC B ?
Thanks in advance ,
Ryan

Actually we have made some discussion with SAP consultant about this requirement ,and they suggest the same thing ,but for many reasons ,we need to make it that way ,and we also made some test for this direct changing by OX18 for new CC assignment .
All other questions are under control now , for financial reason ,we need to update the book inventory to new CC assignment (new profit center after site-specific material master changed ) in some batch session or program ,any idea for this?

Problems with PSE 10 when saving for the web.

I'm having problems saving for web with PSE 10. I edit in RAW, edit in PSE 10, save as Jpeg, resize and save for the web. Results are muddled and not sharp (looks cartoonish). Also, there is no metadata when you look at the image properties. I uninstalled the program and installed again. No change.

Are you resizing the photo before save for web?
What settings are you using in the save for web dialog for the jpeg quality?
If you compress the jpeg too much (low quality settings below 60), that can make your photos look bad.
And save for the web in pse 10 automatically strips any metadata in order to keep the file sizes smaller.
Also, the save for web in pse 10 has a bad habit of not remembering your last used settings, so it's good to verify that your actually set to jpeg instead of the default GIF setting.
Message was edited by: R_Kelly

New Gl- report with some details of CO for the non leading ledger

Hi,
I am using New GL. I have 2 ledgers (local ledger and USGAAP); The local ledger is the leading ledger, so is the one which impacts to CO. I need some information in CO (mainly cost center) for the non-leading ledger (USGAAP). I am thinking in create a report painter with the table of non-leading ledger, but I cannot find a table in NGL which save the CO object and can choose the ledger. I am looking too, this information by a standard report, but I cannot find one.
Any idea about a solution of this situation?
Thanks,
Cecilia

Hi Cecilia, did you assign Cost Center scenario (FIN_CCA) to your ledgers?, otherwise NGL Tables (FAGLFLEXT and FAGLFLEXA) won't have Cost Center field populated. If this is the case, maybe your only option is use BKPF then BSEG + BSEG_ADD (Entry View of Accounting Document for Additional Ledgers) and pull Cost Center from there.
I hope this helps.

Input currency GBP inconsistent with preferred vendor currency EUR for the

Similar Messages

Maybe you are looking for