Inspection Plan Display

Hi Experts,
I am preparing report for displaying inspection plan through SQVI.
Tables Used to generate this report
MAPL
PLMK
PLKO
PLPO
Selection Fields like Matrl Code, Plant and Task list type.
when I execute this query system is giving all the details but for Quantitative Chr LSL, Target and USL is comming
in 2.000000000000000E00     2.3000000000000001E-01             2.50000000000000000E00
It can be address through Z Dvelopment by using conversion functional module, but we are trying to avoid Z reports.
Is it possible to adress such kind of values through SAP Query?  If possible how it can be done?
Thanks
Shiva Patil

Hi Shiva,
In the SAP Query, as far as stanard is concerned, the numeric value would be shown in exponential form only, but you can write a small code of 2-3 lines in query itself by creating a z-field and transferring the value to z-field into decimal form from exponential form.
Thanks
SUMIT GUPTA

Similar Messages

  • How to display changes of inspection plan via t-code :CBWQM ?

    Dear all,
    We are using ECM for inspection plan updating, Is it possible to see changes in detail like QP60,QP61 via T-code : CBWQM ?
    Regards,

    QP61    Display change documents insp.plan?

  • How to block deletion of Inspection Plan

    Dear Experts
    Accicendatally, our users are deleting the Inspection Plan,
    Is there any authorisation object to make Restriction on this,Transaction is QP02.
    Regards
    Sandeep patil

    Hi Sandeep,
    As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
    If you want to restrict this then you have to get help of security team. They will find role for this transaction -
    > then they will find out the objects matanined in this role -
    > this will display all the activities in that object -
    > then they can cancel deletion activity from object list.
    Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
    Hope this resolves your issue, reward points if helpful.
    Regards,
    Avinash.

  • Inspection plan based on workcentre

    Dear Sir
    We have one plant,in that we are using two interfaces,result recording has to come from this interfaces for that there is only one material code,we are using workcenter in inspection plan and even for that plan there are two operation,so how get the correct plan for the production confirmation
    Aim if there is eg X work center  its should take X plan
    If there is Y workcenter it  should take take Y plan
    We donu2019t want to use dynamic modification rule ,and in search field in we use some to detect  the plan,it will peak but how to segregate that w r t to workcentre

    Dear Kunal,
    I am not so sure what sort of user interface you are dealing with.
    First of all may I request you to clarify with which inspection type you are working (03, 04, 01 or 89)?
    For every operation you can assign only 1 work center and 1 inspection plan may contain several operations.
    Inspection characteristics are defined at operation level only. These MICs may also vary operation to operation depending upon nature of operation. For example, if your inspection plan contains u201CDrillingu201D and u201CInner Threadingu201D as 2 operations, you can have diameter as inspection parameter for drilling and pitch for threading. Kindly note this entire information is associated with only 1 plan.
    When the inspection lot is created and you click on results tab in QA32, system throws pop up of operations. There you need to choose for which operation you want to perform result recording. If you select Drilling, only diameter will be displayed to you to put observed reading.
    To sum up, this mechanism ensures to pick operation specific (work center specific) inspection characteristics. There is no need to create 2 inspection plans if your plan contains 2 operations in a single plan.
    Regards,
    Anand Rao

  • Inspection Plan

    I am creating the  Inspection Plans by using the BAPI_INSPECTIONPLAN_CREATE.
    I got the below errors please provide the solution for this.
    1)The valid-from data has been set from today's date
    2)Enter another operation number
    3)Enter another operation number

    hi rk.....
    First One is just a Information message and last two is because of invalid activity or operation id entered wrongly...
    Also u can have a look at my code for uploading inspection plan using bapi....
    [Click here to view code...|https://wiki.sdn.sap.com/wiki/display/Snippets/ABAPProgramtouploadQMInspectionPlanUsingBAPI]
    Also take a look at the template and sample data file attached at the given link...
    Regards
    KArthik D

  • Copy from different plant - Inspection plan

    Hi,
    May I know which method or tcode that i can use to copy inspection plan for various plant for the same material? Let's say I have material ABC, plant 0002, and I still have 4 other plant 8002,8003 ..
    Please advice. Thanks.

    Hi,
    Check out the Transaction Code QST04 -->Display Inspection Plan
    QSR5 --> Archive inspection plans
    Best Regards,
    Brijesh

  • Digital Signature for Inspection Plan and Routing

    Hi,
    Can someone please help me on the topic of how to activate Digital Signature for inspection plan changes. I need to activate Digital signature functionality for inspection plan or routing. Please guide me to any link or shared documents on this topic.
    Thanks
    Vineeth

    Hi Vineeth,
    Standard SAP does not support this. Though I came across similar situation for maintenance plan, where we used BADI for this.
    Try to go through DIG_SIGNATURE_MAINT_PLAN. Consult with a good ABAPer if he can modify it some how for inspection plan.
    The links below may help you to understand the functionality [http://wiki.sdn.sap.com/wiki/display/SAPMDM/E-SIGNATUREforMaintenancePlants-MasterData(ECC6.0)] & [http://www.consolut.com/en/s/sap-ides-access/d/s/doc/YN-IF_EX_IPRM_DIG_SIGNATURE~~~~~~DIG_SIGNATURE_MAINT_PLAN]
    In SAP, check BADI_DIG_SIG_RES_REC_PROCESS, if anything can be done here.

  • ERROR WHEN RUNNING B.D.C FOR ASSIGN OF INSPECTION PLAN TO MATERIALS

    HI GURUS,
    WHEN I RUN B.D.C TO ASSIGN INSPECTION PLAN TO MATERIAL
    I AM GETTING THE FOLLOWING ERROR.
    Error occurred when checking type  group .
    Message no. CP852
    Diagnosis
    Errors occurred when checking the routing.
    Procedure
    u2022     If the check occurred online, display the checking log and remove the causes for the errors.
    u2022     If you saved the routing, call it up again and check it online.  Display the checking log and remove the causes for the errors.
    +NOTE: THIS INSPECTION PLAN WE HAVE ASSIGN MULTIPLE+ M.I.Cs WHICH ARE SIMILAR E.g.
    CHARA180:SMS,
    CHARA:190:SMS;
    CHARA:200:HRM:
    CHARA:210;HRM
    WHEN WE RUN COPY MODULE B.D.C.WE ARE GETTING ABOVE ERROR.
    REGARDS
    AMIT

    Hi Atul,
    WHEN WE DELETE THE REPEATED M.I.Cs AND ONLY RUN THE B.D.C WITH 16 CHARACTERISTICS WHICH ARE NOT REPEATED. THE PROGRAM/RECORDING RUN SUCCESSFULLY.
    AS SOON ADDED THE M.I.CS WHICH REPEATED IN CHARA:170,CHARA:180;CHARA;190;CHARA;200;CHARA;210;CHARA220.
    WE ARE NOT ABLE TO SAVE THE RECORDING AND WE GET ABOVE ERROR.
    MY ABAPER IS SAYING ITS A FUNCTIONAL ERROR.
    REGARDS
    AMIT

  • Inspection plan - Valid to date

    Dear gurus,
    Iam using change number to create Inspection plan. System is displaying always Valid to date as "31.12.9999". But as per business requirement of the client, validity period is 3 yrs. How can i change the date.
    1)     Can i cahnge at change number level?
    2)     or At inspection plan level?
    Iam giving you the details of the field at Inspection plan level.
    Transaction: Qp01
    screen no: 1200
    screen Field name: PLKOD-DATUB 
    Program name: SAPLCPDI
    Package: CP
    Pls guide me how to get valid date as 3 yrs plus valid from date.
    thanks and regards
    Venkat. V

    Hi,
    For change number effetivity we can think of another alternative.
    1) Create one change number and create a inspection plan with group counter 1.
    2) Create another change number and create another inspection plan with group counter 2.Second change number   
         validity should be from 01.01.2012
    3) When a goods receipt is done system automatically assigns the inspection plan with group counter 1 till 31.12.2011.
    4) When a goods receipt is done on 01.01.2012 system will create the inspection lot with status created as there are
         2 inspection lots from 01.01.2012.
    5) Go to the first inspection lot and change the status to 1 and assign second inspection lot which is valid from 01.01.2012.
    CSN

  • Assignment of Maintenance Package to Inspection Plan operation

    Hi All,
    For Stability Study I have created Inspeciton Plan and now I need to assign Maintenance Package to Operation. Please help in assiging Maintenance Strategy/Maintenance package to Inspection Plan operations.
    Thanks in advance.
    Regards,
    Devang

    Hi Luke,
    I was able to assign Maintenance Strategy and corresponding package to operation. Thanks for your help.
    But now I am stuck with some other issue. I have completed initial testing, then scheduling as well as result recording against scheduled inspection lots. But when I check "Display Stability History", I am getting tab for Initial Test along with one tab for each assigned conditions. But here issue is, under Intial Test tab I can see all characteristics results while for under other tabs (condition tabs) system shows only first characteristic result. Here please note that I have used same Inspection Plan and even result racorded and valution done (all accepted) is same for intial inspection lot as well as scheduled inspection lots for conditions.
    I am unable to understand why system is showing All Characteristics results under Initial Test tab but only first characteristic is shown under Condition tabs.
    Hope you can help me with this as well.
    Thanks and regards,
    Devang

  • Picture attachments for inspection plans

    We are using QM in Procurement to inspect incoming raw materials. We have created inspection plans per a material or group of materials and would like to provide a relevant picture(s) that can be viewed when the inspector is recording results on the inspection lot. We have looked at attaching pictures to the material master using GOS or using the PRT and DMS document that links to an external file. Both solutions take additional clicks to bring up an externally stored document. We are wondering what other companies are doing if they have a similar requirement to display pictures during the results recording process.

    Hi,
    Attaching a picture  or any document in SAP , the best way  is through  DMS only. By using this you can store the required pictures or drawings  and can call the same at any place. You may be able to attach  some attachments at PO /  Insp  method but that will lower the performance of server. If you attach so many documents then your transaction performance  will be affected. So better to store data in separate server  and  call it when needed.
    Best Regards,
    Shekhar

  • Error while uploading Inspection plan

    Dear Friends,
    I am creating inspection plans using BDC. The MIChas 2 versions. When i am using version 1, the inspection plan is created. Whereas when i am using MIC version 2 i am getting error "error occured while checking type group".Kindly let me know how do i resolve this.
    Regards
    Vivek

    Hi,
    Thanks for the reply. when i am trying to create a inspection plan in other plant, we have 4-5 sampling procesures to select from. But for this perticular plant where we are having problem, its showing only one. How do i get more options?How do i extend a sampling procedure to a new plant.
    Vivek
    Edited by: vivek mankad on Feb 23, 2010 7:57 AM

  • Error while creating Inspection plan

    Hi,
    While creating inspection plan in QP01, system is showing error  "Material type ZROH is not defined for task list type Q''
    Please help me to solve the error.
    Thanks
    Prasant

    Hi,
    This is due to the configuration error,
    Just use T.Code OP50
    Create an entry for task list type "Q" with material type "ZROH" and save,
    Then try creating a Quality Inspection Plan, it will work
    Regards
    Merwyn

  • Sale Order / Project specific Inspection Plan

    Dear All,
    I want to create Sale order or Project specific inspection plan for a material. This is because, my  customers want some specific inspection requirements for individual materials, which are assigned to Sale order or project. I want to inspect the material after receipt for these specific account assignments. I do not want to assign the customer because, my single customer may give different sale orders with different inspection requirements.
    But in inspection plan, i can not see the assignment of sale order / project as i can see in Rate Routing.
    Can anybody tell me about this?
    Regards,
    Prashant Kolhatkar

    Create a Material ONE as Configurable Material. Assign 300 Class Type Class with Charcateristics created through CT04 Transaction which in turn linked to MICs.
    Create another Material TWO with same Class but not configurable but is a Variant of Material ONE (MRP 3 View)
    Maintain Configuration Profiles for both Materials.
    In Material TWO, for insp. type details click on Insp. by Config indicator.
    Whenever a Sales Order is created, maintain the requirements from the Customer in Characteristics and save the Sales Order. Against this Sales Order whenever a GR is made for respective Production Order inspection lot is created against the specifications given by Customer and not that maintained in inspection plan.
    Best Regards,
    K. Raghavendra Nayak

  • How to use Same Inspection plan for Multiple Plants?

    Hello,
    When I create a Process Order for material (M1), release and save it for a Plant A then I get the Inspection lot automatically.
    Now I have another Plant B that we have created. We would like to use the same Inspection plan that has been created for Plant A and M1
    So in the changed mode(QP02) of the Inspection plan for Plant A in the material assignment tab I added the Material M1 and the Plant B. I am assuming this means when I create the Process order for M1 in Plant B then it should use the same Inspection plan.
    But when I create the Process Order for M1 for Plant B, release and save it then it does not created the Inspection lot automatically(though I can create Inspection lot manually)
    Can you tell me if there is setting that will allow me to create the Inspection lot automatically on saving the Process order which should use the Inspection plan that I just assigned.
    And also let me know if there is a better way to handle same Inspection Plan for same material but multiple Plants.
    Thanks
    SAP Fans...

    Dear,
    For your message my understanding is that you are not getting Inspection lot created in Plant"B". Inspection lot for a material would get created based on the Inspection Setup for the material master "QM View", so compare the QM for the material in both plants and correct it for Plant "B".
    Probably I feel Inspection Setup is not complete for the material in Plant "B" - Generally when extending material by copying referance, in the QM view you need to click the Inspection Setup Button, for the data to be copied...otherwise it does not copy the Inspection setup from the referance plant.
    Regards,
    Prasobh

Maybe you are looking for