Install error for Corporate time Outlook Connector
I have tried installing the outlook connector to Corporate Time but it fails. I have attached the install log. While installing outlook there was no Corporate or Workgroup option. Any Ideas?
Start setup
Install time: 9-29-2002 21:39:48
Searching for MS Outlook installation : OK
Check install package :
Version :
Install date : 200207301714
Enter CheckRequirements.
Running : Win 2000
Exit CheckRequirements
Check admin rights : OK
Enter GetInstallMode
Silent install : FALSE
Exit GetInstallMode
Loading install dll : OK
Check if OL is running
Check OL running exit
Enter CheckOutlookVersion
Outlook version : 9.0
Get Outlook service option : 0
You have installed Microsoft Outlook with an unsupported option.
Rerun the Microsoft Outlook Setup and in Service Support page, choose Corporate or Workgroup option.
Setup cannot continue.
Exit CheckOutlookVersion
To switch your Outlook client to Corporate/Workgroup mode, go to Tools -> Options.., select the "Mail Services" tab, then press the "Reconfigure Mail Support" button. You should then be presented with a wizard that will take you through the process. You may have to have the Outlook install media handy. I'm not sure. Once Outlook is in Corporate/Workgroup mode, try installing the Outlook Connector again.
Similar Messages
-
Corporate Time sync connector ver 3 and palm problem
When I use the Corporate time version 6 with the Corporate time sync connector version 3, my palm device (Tungsten T3) displays starts and plus signs next to my calendar events. Also, my recurring events do not show up after a sync operation.
I tried to use a later version of Corporate Time and the connector, but was unable to successfully get the two items t o communicate. Any idea why the recurring events do not show up after a sync?Did you set the same WPA Encryption key on both the devices ? Do you have the latest firmware on both the devices ?
-
Adb sync not working for commsync and outlook connector after Patch 122793-
Hello,
I have opened the case 71038740 for this problem.
We have upgraded communication express:
v6.3-4.01 (Patch 122793-17,) ==> v6.3-11.01 (Patch 122793-24)
Communication Express seems to work fine but the adb
synchronisation for outlook connector and commsync does not work anymore.
The errors that we have are:
[13/May/2009:10:03:02] info (13176): for host 10.194.1.7 trying to
GET /abs/search.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR PagedSearchResultHdler.expand: couldn't
stop search: 6 : The parameter provided is invalid : stopSearch:
null searchID
[12/May/2009:19:01:59] info (13176): for host 10.194.1.7 trying to
GET /abs/s
earch.xml, service-j2ee reports: PWC1412: WebModule[]
ServletContext.log():ERROR
PagedSearchResultHandler.expand: searchBook returned: 2 : Invalid
entry : psea
rchBook: invalid bookEntryID
Looking at a specific session we also have:
13/May/2009:10:49:21] info (13176): for host 129.194.17.75 trying
to POST /wabp/get_servertime.wabp, service-j2ee reports: PWC1412:
WebModule[] ServletContext.log():TRACE Warning:getDBHandler - Can't
open Personal Store : DBHandler: couldn't open configuration file at
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch : PropertyReader: config is
not a file:
/var/opt/SUNWuwc/WEB-INF/domain/unige.ch/personalstore.properties
It looks like it is trying to opening
domain/unige.ch/personalstore.properties instead of
domain/personalstore.properties.
From what I see, we did not have this error in the previous version.
What is weird, that adb seems to work fine in uwc web interface.
I add the http dialog for the ones who may help me to debug:
POST
/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=510312&fmt-out=text/xml
HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: webcalendar.unige.ch
Content-Length: 35
Connection: Keep-Alive
Cache-Control: no-cache
username=xxxx&password=yyyy%2BtempoHTTP/1.1 302 Moved Temporarily
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Cache-control: private
Location: http://xxxx.unige.ch/
Set-cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9; Path=/
Content-length: 0
Content-type: text/html
GET / HTTP/1.1
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
User-Agent: XCPCSync
Host: xxxx.unige.ch
Connection: Keep-Alive
Cache-Control: no-cache
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:15 GMT
Content-type: text/html;charset=ISO-8859-1
Content-length: 157
<script>
window.location="/auth";
if (window.location.protocol != "https:") {
window.location = "https://" + window.location.host;
</script>
POST /wabp/get_servertime.wabp?now=515546&fmt-out=text/xml HTTP/1.1
Content-Type: application/x-www-form-urlencoded
User-Agent: XCPCSync
Host: xxx.unige.ch
Content-Length: 0
Connection: Keep-Alive
Cache-Control: no-cache
Cookie: JSESSIONID=332E08F023EEA394567DC0E77D989FF9
HTTP/1.1 200 OK
Server: Sun-Java-System-Web-Server/7.0
Date: Wed, 13 May 2009 11:37:20 GMT
Content-type: text/xml;charset=UTF-8
Transfer-encoding: chunked
5c
<?xml version="1.0" encoding="UTF-8" ?>
<wabp errorcode="0" servertime="20090513113720Z" />
0Here is the debug log from the communication:
56:21 Open sync engine
56:21 Client login date/time : 15.05.2009 08:56:21
56:21 Version : 2.0
56:21 Version 3.1.2008062313 (EN)
56:21 Built from: /trunk
56:21 Product ID: 209-101
56:21 User: XXXX
56:21 Company: UNIGE
56:21 day 15 : hour 6 : min 56 : DST 0 : GMT (Greenwich Meridian Time)
56:21 day 15 : hour 8 : min 56 : DST 1 : Local time
56:21
59:17
59:17 Performing Normal Sync of 'Contacts'. Sync Status before performing synchronization:
59:17 App1 : 'Contacts', Trans1 : 'Sun'. App2 : 'Contacts', Trans2 : 'MSOl'. ContractId : 131073 , App1Id : 6 , App2Id : 9
59:17 Status before Sync - SrcRecId : e1213fd3c71c35d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC5644612000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : 20090514155311Z , DstModInfo : 2009/05/14 15:52:08
59:17 Status before Sync - SrcRecId : e11dba338af2e2d , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56843B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b44e2e , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56643B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338ab0e2c , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56443B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338bbae30 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56243B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338c03e31 , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56043B2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Status before Sync - SrcRecId : e11dba338b80e2f , DstRecId : 000000001E8781B2F63CBD45BCD3F9BF9699CC56E43A2000 , SrcRecStatus : Not changed , DstRecStatus : Not changed , IsSrcRecurRec : 0 , IsDstRecurRec : 0 , RecurringDate : RAND NO DATE , SrcModInfo : Not Used , DstModInfo : 2008/11/21 08:34:18
59:17 Enter CWABP::SendCmdToServer
59:17 CWABP::SendCmdToServer - https://xxxx.unige.ch:443/wabp/login.wabp?authOnly=true&appid=Sync3.0&now=743093&fmt-out=text/xml
59:18 CWABP::SendCmdToServer - Post success Response:
59:18 Exit CWABP::SendCmdToServer
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name errorcode
59:18 Non zero error code returned in WABP
59:18 Enter CWABP::GetWABPAttribute - doc Datat
59:18 CWABP::GetWABPAttribute - doc Element attribute text
59:18 CWABP::GetWABPAttrib - invalid Tag Name rawmsg
59:18 The errorMsg returned is :
59:18 Exit CWABP::CheckErrorCode -Error = .
59:18 Exit CWABP::Login. Error =
59:18 CRSunTransContact::LoginWABP - Unable to login
59:19 Enter CSunTransUtil::Configure
59:21 Enter CRSunTransBase::GetFirstErrorMessage
59:21 Exit CRSunTransBase::GetFirstErrorMessage
59:21 Enter CRSunTransBase::GetNextErrorMessage
59:21 CRSyncUtil::FeedProfileShim2Trans : SetTranslatorProfile Not Supported
59:21 CRSyncUtil::FeedProfileShim2Trans : returns 0
59:21 CRSyncUtil::LogFatalTransError : 'GetFirstNewId()' API of 'Sun' translator for 'Contacts' application returned empty error
59:25 Sync completed at 08:59:25 AM on 05/15/09 -
Is there any news on better sync between Corp Time and Outlook? Our company uses the old Outlook Connector tool.
Is there a newer version of Outlook Connector? I am on V3.3. I heard that there was V3.4 or V4 that has reduced many of the bugs.
Also, any news on accessing the web based Corp Time site from the new Cell Phones? I have web access on my Samsung A500 but it is only usefull on websites that have "mobile" version.
Our company also uses the old CT&S tool for accessing our Corp Time Server from outside the firewall. Kind of webmail way of getting to the calendar.
Does anyone know if there is a "mobile" version of this site tool?
The ideal solution would be a way to sync Corp Time with the calendar that is built into a cell phone, without requiring the bulk and overhead of the Palm or Windows CE OS.
Short of that, I'm open to suggestions.Upon taking over Steltor, Oracle released new versions of most CorporateTime components (client and server), which mostly consisted of them sticking their name on the Steltor products. More significant updates have occurred since then, especially with the release of 9.0.4. Outlook Connector was initially bumped to v3.4 and Oracle released a few point releases. Functionally, versions 3.3 and 3.4 are very similar. The latest release, called Oracle Connector for Outlook 9.0.4, looks and feels much the same as well, though there are some additional features and enhancements. See the release notes:
http://download-east.oracle.com/docs/html/B12029_02/calendar.htm#1006785
Collaboration Suite includes a wireless server that might address your mobile needs, though I haven't worked with it.
Regards,
Jeremy Good
Information Systems
Eastern Mennonite University -
Install Errors for Catalyst Pannini
I can't install Flash Catalyst Pannini on my 64 bit Windows 7 PC. I have the CS5 Master Suite installed and AIR and Flash latest versions. Is there anyway to get this installed so I can do mobile development?
Here's the error info:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 27 warning(s)
WARNING: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and the session payload {00C5CA45-DFBA-4ceb-9DF2-E932233CCF68} Adobe Flash Player 10 Plugin has no upgrage/conflict relationship with it.
WARNING: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the session payload {B65AD0E3-C64A-4b91-BAEF-0EA667697FB1} Adobe Flash Player 10 ActiveX has no upgrage/conflict relationship with it.
WARNING: OS requirements not met for {2CBB867A-D1BE-4937-BD7A-E97999474721}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Warning: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Warning: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: Verifying payload integerity : Failed with code 1
ERROR: MsiConfigureProductEx failed with error: 1612
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Adobe Media Player: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - Adobe Flash Catalyst Panini: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - Adobe Flash Fonts1: Install failed
ERROR: - Microsoft_VC90_ATL_x86_x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - Microsoft_VC90_MFC_x86_x64: Install failed
ERROR: - DynamiclinkSupport: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: - Adobe AIR: Install failedHere's my latest error list with Panini.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 6 warning(s)
WARNING: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and the session payload {00C5CA45-DFBA-4ceb-9DF2-E932233CCF68} Adobe Flash Player 10 Plugin has no upgrage/conflict relationship with it.
WARNING: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the session payload {B65AD0E3-C64A-4b91-BAEF-0EA667697FB1} Adobe Flash Player 10 ActiveX has no upgrage/conflict relationship with it.
WARNING: OS requirements not met for {2CBB867A-D1BE-4937-BD7A-E97999474721}
WARNING: OS requirements not met for {68CEA5C9-2964-4ECB-84A4-D77C511332BC}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
ERROR: Verifying payload integerity : Failed with code 1
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed -
Install Errors for 9i on Solaris 9
I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
Oracle Database Configuration Assistant Errors for install
ORA-27303
ORA-27146
ORA-27300
ORA-27301
ORA-27302
Can someone enlighten me as to what these mean?
Message was edited by:
d072330For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=3000
set semsys:seminfo_semmsl= 256
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=200
set shmsys:shminfo_shmseg=20 -
Install error for Acrobat portion of CS6 Design and Web.
Doing a fresh install of CS6 Design and Web, on a new iMac running 10.8.5, I get the following error.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW006, DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro 10.0.0.0 -----------
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - Acrobat X Pro : Install failedHi ebreden,
Please refer the kb: http://helpx.adobe.com/creative-suite/kb/installation-error-dw050-dw020-cs5.html.
Exit Code 6: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Regards,
Romit Sinha -
I'm brand new to SAP and trying to get mini-sap installed on my laptop. I have been running into database issues that prevent a clean install of SAP and have now removed all instances of SQL server (Express, 05 and 08). The original errors dealt with sortorders and charsets.
Now I'm getting different but equally frustrating errors - "DBCOMMONDBENV_IND_MSS InternalColdKeyCheck:0 - Please install MS SQL Server before continuing the installation." As soon as I do that, I start getting errors for invalid instanceids and then uninstall and try again. It's a mad circle.
Any recommendations on how to install this?
thanks for your help,
JeffMiniSAP comes AFAIK with MaxDB as database, not with SQL Server.
Where did you get the DVD?
Markus -
Installing ITunes for 4th time with same IPod !!
Because I've had to have manual factory-default restarts performed on two different computers, I'm about to have to re-install ITunes for the 4th time. But, I'm still using the same IPod...I believe I've read that the max about of Itunes installs you can have for one Ipod is 3.
1. Is that info correct?
2. Does that pertain to my situation?
3. Is there some type of work-around that I could do while I still have this 3rd version installed on my computer?
PLEASE HELP!i had read it on itunes somewhere, but i just looked it up on the apple site...this is what i found:
+Home Sharing.+
+Now entertainment runs in the family. With Home Sharing, you can share music, movies, TV shows, and more among computers in your home. Browse iTunes libraries on up to five authorized computers on your home network and import whatever you like. You can also automatically import new purchases made on any of the computers.+
so it seems it's 5 computers and not 3 and still doesn't say too much info about it. thing is, in my case, even though this will be the 4th install it's only been 2 computers. -
0008 install error for upgrade playbook app
Hi, BlackBerry approved and we were able to upgrade our apps. However, we found that they are unable to install. The error mesasge shows "Install Error: [0008] There was a problem during installation. Please try again".
I had looked around other sources but couldn't find any information about this. Does anyone know the solution on this?
Device : PlayBook, OS ver. 2.1.0.1526
Thanks in advance.Look at message 42, 44 here
http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/Install-Error-0008/m-p/2563161/highlight/...
Sarah. -
Install error for Chart Server for Siebel 8.1.1.1
Hello all,
I have Siebel 8.1.1.0 installed, and the 8.1.1.1 patch applied. It's been stable for a while now, but I've decided to get the charts functionality working, and am having trouble with the installer.
Basically, I get library errors, and the installer won't start. I've tried playing around with LD_LIBRARY_PATH (which helped in the Siebel install), but still nothing. I've tried running it through putty and VNC Viewer, with no luck.
I suspect that I'm missing something in my Linux 5.1 environment, which is a virtual machine using Amazon Web Services. Unfortunately I'm not much of a Linux guy, and don't want to start playing around unless I have an idea what needs to be done. It's a bit frustrating since the other Siebel install programs run ok.
Any thoughts/suggestions would be very much appreciated..
Thanks,
Jon
PS - Here are the process/errors I am getting:
Login as Oracle user and navigate to:
/u05/Siebel_Install/Siebel_Install_Image_81/8.1.1.0/Linux/Server_Ancillary/Visual_Mining_Netcharts_Server/enu/unix
Execute:
./NetChartsServer4.6SiebelEdition.linux.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object
file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared obj
ect file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared ob
ject file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared ob
ject file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared obj
ect file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared ob
ject file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared ob
ject file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object
file: No such file or directory
/tmp/install.dir.25010/Linux/resource/jre/bin/java: error while loading shared l
ibraries: libpthread.so.0: cannot open shared object file: No such file or direc
tory
bash-3.1$
bash-3.1$ ./NetChartsServer4.6SiebelEdition.linux.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.25136/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
PPS - I also did a find / -name 'libc.so.6' and got the following:
/lib/i686/nosegneg/libc.so.6
/lib/libc.so.6
/u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6
/u02/Apache/lib/stubs/libc.so.6
When I try putting the /u01/app/.. path into my LD_LIBRARY_PATH, I get similar errors to below, it tells me:
hostname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libsepol.so.1)
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by awk)
dirname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by dirname)
/bin/ls: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /bin/ls)
/bin/ls: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libacl.so.1)
/bin/ls: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libselinux.so.1)
/bin/ls: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libattr.so.1)
/bin/ls: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libsepol.so.1)
basename: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by basename)
dirname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by dirname)
basename: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by basename)
hostname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by hostname)
hostname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libselinux.so.1)
hostname: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libsepol.so.1)
Launching installer...
grep: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by grep)
grep: /u01/app/oracle/product/11.1.0/db_1/lib/stubs/libc.so.6: version `GLIBC_2.4' not found (required by /lib/libpcre.so.0)
Segmentation faultWe experienced similar issue on our installation. Worked with Oracle support, and seems like you need to change the environment variable settings on the linux and .bin file. Here is what we have changed and we were able to install charts in 8.1.1.1 Linux environment.
With Oracle expert help, we figured out that the .bin file needed to be changed. we did the following on our second QA server to run the installer without setting any other environment variables:
a. identified the above files by using find / -name <filename> to find the location.
b. checked whether it is their in the env varialbles.
c. more than one location was found . some of them were like /usr/lib and /lib etc. even there was a file by the name in siebsrvr/lib and gtwysrvr/lib etc
d. when we add this in the LD_LIBRARY_PATH and PATH, then the error was different than what we saw first time.
e. this clearly shows that there is something wrong with the environment variables.
h. as per this, he has to comment out two places of LD_LIBRARY_PATH. he did this. saved the *.bin file to a new bin file
i. uncomment LD_ASSUME_KERNEL variable.
J.then set DISPLAY. The installer worked fine.
k.. the issue was with the bin file provided and the solution is mentioned in the above linke.
1. cd ${install_image}/8.1.1.1/Linux/Server_Ancillary/Visual_Mining_Netcharts_Server/enu/unix
2. export DISPLAY=${my_ip}:0.0
3. sh NetChartsServer4.6SiebelEdition.linux.bin
Hope this helps.
Edited by: user10243604 on Jul 23, 2010 10:18 AM -
Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run
Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
at oracle.net.ca.InitialSetup.<init>(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000 /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000 /lib/libthread.so.1
0xfefd0000 /lib/libdl.so.1
0xfeed0000 /lib/libc.so.1
0xfea00000 /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000 /usr/lib/libCrun.so.1
0xfee50000 /lib/libsocket.so.1
0xfedc0000 /lib/libnsl.so.1
0xfeda0000 /lib/libm.so.1
0xfeeb0000 /usr/lib/libsched.so.1
0xfe9a0000 /lib/libm.so.2
0xfed50000 /lib/libscf.so.1
0xfe980000 /lib/libdoor.so.1
0xfe960000 /lib/libuutil.so.1
0xfe940000 /lib/libmd5.so.1
0xfe920000 /lib/libmp.so.2
0xfe8e0000 /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000 /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000 /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000 /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000 /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000 /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000 /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000 /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000 /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000 /usr/dt/lib/libXm.so.4
0xf0cf0000 /usr/openwin/lib/libXt.so.4
0xf0cc0000 /usr/openwin/lib/libXext.so.0
0xf1890000 /usr/openwin/lib/libXtst.so.1
0xf0c30000 /usr/openwin/lib/libX11.so.4
0xf0be0000 /usr/openwin/lib/libdps.so.5
0xf0a90000 /usr/openwin/lib/libSM.so.6
0xf0a70000 /usr/openwin/lib/libICE.so.6
0xf0a30000 /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000 /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000 /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000 /lib/libkstat.so.1
0xefc40000 /lib/libgen.so.1
0xefc20000 /lib/librt.so.1
0xefbf0000 /lib/libaio.so.1
0xefbd0000 /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1 localhost.localdomain localhost
#192.168.100.1 bt.lan.home bt
#192.168.100.5 jacek.lan.home jacek
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help. -
Multiple install issues for first time user of 10gRelease2
Despite doc which said 10g Release 2's certification with Windows XP Professional (> SP 1), clusterware install fails with OUI-1-8001 (Error - needs XP ver 5.0 or 5.2). My XP Prof Ver 5.1.2600 apparrently isn't compatable. Error msg suggests upgrading Service Pack.
Tried to install Personal Edition, but never saw the oppty to selection it after downloading individual zip files (clinet, gateways, clusterware) into separate folders and then running setup.exe's in each folder. Don't know if I'm running Personal Edition.
This is my first time attempt to install Oracle dB. Appears that my installation of client and gateways went ok, but I'm not doing something right to start SQLPLUS or my clusterware issue is causing a problem.
When starting SQLPLUS, entered by username (email), passwd, not sure what to enter for host string. Leaving blank, a timeout occured. Do I need a connect identifier? SQLPLUS hangs if I try to then click File.user11971328 wrote:
Despite doc which said 10g Release 2's certification with Windows XP Professional (> SP 1), clusterware install fails with OUI-1-8001 (Error - needs XP ver 5.0 or 5.2). My XP Prof Ver 5.1.2600 apparrently isn't compatable. Error msg suggests upgrading Service Pack.
Tried to install Personal Edition, but never saw the oppty to selection it after downloading individual zip files (clinet, gateways, clusterware) into separate folders and then running setup.exe's in each folder. Don't know if I'm running Personal Edition.
This is my first time attempt to install Oracle dB. Appears that my installation of client and gateways went ok, but I'm not doing something right to start SQLPLUS or my clusterware issue is causing a problem.
When starting SQLPLUS, entered by username (email), passwd, not sure what to enter for host string. Leaving blank, a timeout occured. Do I need a connect identifier? SQLPLUS hangs if I try to then click File.Am curious - which version of Oracle DB 10gR2 did you download? Did you take 10.2.0.1 or did you grab the 10.2.0.3 for Vista or 10.2.090.4 for Win 2008? The questions sound suspiciously like the latter.
If you have the right one for WIndows, the Personal Edition selection shows up on the very first screen - you select whether you want Enterprise Edition, Standard Edition (which also includes the SE1 variant) and Personal Edition. No selection implies wrong download.
Under normal circumstances, you ONLY install the database CD. That gives you pretty much all you need for learning, including the SQLPlus. Then if you want more - such as the sample data, because you deliberately did not include it at database install, or the Apache front end - you get the Companion CD and install it after the fact. The Client CD is used for those computers that do not have the database CD. Gateways are used on the database much later, when you want to connect to DB2 or SQL Server and the like. And the clusterware is when you are really advanced ands want to get a high availability cluster operational.
Edited by: Hans Forbrich on Oct 4, 2009 8:17 AM
On rereading your question, it sounds like you installed everything instead of just the database CD. You need ONLY the Database download for learning. -
Very annoying 11g OUI install error for the oracle clusterware
Clean install of 11g RAC Clusterware downloaded from oracle site today
./runcluvfy.sh stage -pre crsinst -n lin1,lin2 -verbose
...everything passes just fine. Great. Time to install the clusterware.
[oracle@lin1]$ ./runInstaller
Installer starts, prerequisite checks are done for **Oracle 9.2 RAC and OCR*** Where did 9.2 come from?. All the checks succeed so... whatever...just move on.
I get a few screens to the "Specify Cluster Configuration" sceen.
I enter the following for the Cluster Name: lin_cluster
I enter the following for the 2 nodes:
Public Node Name Private Node Name Virtual Host Name
lin1 lin1-priv lin1-vip
lin2 lin2-priv lin2-vip
Click next.....ack!! Error: "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, lin1, that you entered is being used by more than once [sic] for the same node"
So, what to do? How more unique can the names be?
There is an option to "Use A configuration File..." and browse for it. Anyone know where that file is?
Any assistance much appreciated.Ice,
Yes my friend...well done. There was an incorrect entry in my /etc/hosts file as follows:
[root@lin1 ~]# more /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.50 shiva
# Public Network - (eth0)
192.168.1.100 lin1
192.168.1.101 lin2
# Private Interconnect - (eth1)
192.168.1.100 lin1-priv <-----right here...should be 192.168.2.100
192.168.2.101 lin2-priv
# Public Virtual IP (VIP) - (eth0)
192.168.1.200 lin1-vip
192.168.1.201 lin2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler
192.168.2.195 openfiler-priv
Thank you so much for your assistance thus far. I'm already on to the next problem. These RAC installations are new territory for me and are a real challenge. - thx, yomick -
Ever since the release of 7.5, I've been unable to update iTunes. As a result, I've been blissfully enjoying 7.4 for a while now. However, I bought an iPhone yesterday and must deal with my inability to install 7.7. In my attempts to install (both .exe and .msi files individually), I get the following error:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
A quick search for this error on Google and the Apple support forums leads me to http://support.microsoft.com/kb/315346 but it unfortunately only applies to XP/ Server 2003. I figured I should target iTunes as the problem and not Vista, as I have no trouble installing anything else at all.
I'm going crazy in frustration. I've tried everything from quiet installs to editing the .msi files through Orca. Any thoughts?I wanna ask is it my display or something else. Im using 1366x768.
Yes it is. The system requirements are there for a reason, not just for fun. These apps all have tons of palettes and require extra space for displaying timelines, compositions and video previews and even if they could be installed with such a small screen res, working with them would be no fun at all because things would get cut off or you would be forced to shuffle palettes around all the time. You really need a qualified computer.
Mylenium
Maybe you are looking for
-
Hand made or generated GUI code, what do proffesional use?
Hello! I am currious about what programs people that work as a programmer use? Is it common that they use programs that generats code like Netbeens for instance? I tryed that program in design mode to make a gui, but when I looked at the code it had
-
Photos do not open in Photoshop Elements 10 when opened from Photoshop Lightroom 3
I am trying to edit photos using the external editor option in Photoshop Lightroom 3, using Photoshop Elements 10 as the external editor. I installed Photoshop Elements 10 about the 13th May 2012. Photoshop Elements loads correctly but the photos do
-
System Accepting for Making PO based on Un-released PR
Dear gurus, We have activated PR Release stategy without classification. Even though PR was not released, system allowing to create a PO with reference to that PR. Please look into this and guide me, where we need to check/ verify the settings for no
-
Not able to start oracledbconsoledev
Hi, Recently I insatlled db on my laptop with windows vista. the db version is 10.2.0.3. Till yesterday I was able to access the db but today i see in the services that the oracledbconsoledev services is not up and when i tried starting its not happe
-
Please help Excite AT305-T16 got hacked - See Video
I just got the Tablet on 01/23/13. I ordered a used one (like new condition) from Amazon Warehouse. It came very fast within 2 days. Look like the warehouse is in NV state and I am in CA. I got the tablet S/N:5C043564R. You have to look at the video