Install SCCM client remotely with admin rights

Hi,
I want to deploy SCCM 2012 R2 clients remotely via PowerShell script running on an admin computer with the following commands :
$Computers = Get-Content C:\Computers.txt
$Computers | % { Copy-Item -Path C:\Temp\ccmsetup.exe -Destination \\$_\C$\RemoteTemp\ }
Invoke-Command -ComputerName $Computers -ScriptBlock {\\$_\C$\RemoteTemp\ccmsetup.exe /mp:MP01}
When I run the PS script, the client is not installed on remote computers. When I run the ccmsetup via command line locally, there is a popup displaying if I want to allow the EXE execution. When I click on YES, the client is well installed. So I want to
know if there is a solution to do it from my PS script with admin right bypassing UAC on remote computers ?
Thanks.

If that's really the road you want to take then this will probably help:
http://jeffwouters.nl/index.php/2011/11/having-some-fun-with-uac-and-powershell/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

Unable to install sccm client from SCCM console install client option

Hi
Unable to install client on windows 7 64 bit enterprise from sccm console. The client is discovered in sccm console with status client = NO, so we want to install sccm client from console remotely.
We cannot enable push install. my id has full access on SCCM site server SCCM product also admin rights on workstations. I am able to access net bios path SMS_<site code> of site server then client path from client machine. machine is in domain and
is boundry of sccm .
Client push install in console is diabled
Regards Sushain KApoor

Hi!
Examine the ccm.log located in <SCCM 2007 InstallationPath>\LOGS on the site server.
Best regards
Henrik

Firefox Silent updater will not work unless I launch Firefox.exe one time with Admin rights

I am building a Firefox 17.0.4 ESR package to use for my Enterprise. Everything is working great except for the updater piece. I am using the configuration.ini file during the install with the command MaintenanceService=true turned on, and a mozilla.cfg file with updates enabled, pref("app.update.enabled", true). I am running the install both manually, and through SCCM with Admin rights, including the maintenance service. After the install runs, I open Firefox as a limited user and go to Help->About, and it says Updates are available at www.firefox.com, and that the browser is set to the ESR release channel.
In all my troubleshooting, the only 2 sure ways I have found that make the auto updates work for a user were to run firefox.exe as an admin 1 time, or to install the base esr package as an admin after my install package. That will fix it for the logged in user only, but another user would run into the same issue. It appears that something is not installing correctly, but I cannot determine the cause.
My install command is:
Firefox Setup 17.0.3esr.exe /INI=%INST%\Configuration.ini

In my organization, we have removed Admin rights from all users, but use a product that can elevate any .exe with create a policy for to run with Admin rights. We have a policy set for updater.exe and it does work for future updates, just not this first update after install until Firefox itself is run as Admin for the first time. My thought is that when Firefox and the Maintenance service are installed with Admin rights through SCCM, the maintenance service should have inherited rights from that install. Forgive me if I am wrong in my conclusion.

Restrict Standard User from not removing the COM-Addins registered under HKLM with Admin rights.

Hello,
I have developed a COM-Addin for word 2013 by VS 2013 and installed it under the HKLM with Admin rights. Now from an non-admin account, ie Standard User I'm able to uncheck that addin from the COM-Addins dialog and remove it also. Previously I have done the
same thing for word 2007 addins and if a non-admin user tries to uncheck it the warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" pops
up. But this is not happening for office 2013 apps(basically word, excel and powerpoint).
This is happening for all Add-Ins installed under HKLM.
How can a Standard User be restricted from unchecking and removing the Office Addins registered under HKEY_LOCAL_MACHINE with same warning "The
connected state of Office Add-ins registered in HKEY_LOCAL_MACHINE cannot be changed" in
a pop-up box?
Regards, Sayan

Hi,
The behavior is changed since Office 2010. Office 2010 and Office 2013 allows a standard user to turn a per-machine add-in off by unchecking the add-in in the COM Add-ins dialog.
To restrict Standard User from not removing the COM Add-ins, we can try to add the add-in to
the Group Policy option: List of managed add-ins in the Office Group Policy template.
Word for example, the policy is under:
User Configuration\Administrative Templates\Microsoft Word 2013\Miscellaneous
To enable this policy setting, provide the following information for each add-in:
In "Value name", specify the programmatic identifier (ProgID) for COM add-ins, or specify the file name of Word add-ins.
To obtain the ProgID for an add-in, use Registry Editor on the client computer where the add-in is installed to locate key names under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins.
To obtain the file name of an add-in, click the File menu in the application where the add-in is installed. Click Options, click Add-ins, and then use the Location column to determine the file name of the add-in.
In "Value," specify the value as follows:
To specify that an add-in is always enabled, type 1.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

I can't install sccm client

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
i want to know if the client can be installed on this version os.
thks

hi,my client os is win server 2012 r2,
i want to install sccm client on it ,but i failed. why?
ccmsetup log as follows:
<![LOG[Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context=""
type="0" thread="8088" file="siteinfo.cpp:678">
<![LOG[Checking compatibility of site version '5.00.7804.1000', expect newer than '5.00.7845.1000']LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="8088"
file="siteinfo.cpp:703">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="2" thread="8088"
file="siteinfo.cpp:721">
<![LOG[Client version '5.00.7958.1000' is not compatible with the site '001' version '5.00.7804.1000'. Fail the installation.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="3"
thread="8088" file="ccmsetup.cpp:1462">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='324' will not be sent.]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012"
file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x87d0029d]LOG]!><time="14:11:32.774-480" date="02-19-2014" component="ccmsetup" context="" type="1" thread="6012" file="ccmsetup.cpp:10879">

OSD Task Sequence fails to install SCCM client

Hello,
Our OSD task sequence fails to install the SCCM client with certain images.
The TS gets to the "Setup Windows and Configuration" step, during which it downloads all the necessary SCCM client files (silverlight, C++ redistributable, client.msi....etc.). At this point computer restarts and in never loads back into the
task sequence, instead it enters the minisetup (setup is starting services, setup is installing devices, setup is applying system settings...preparing computer for first use), after which the computer restarts and you are back at the CTR+ALT+Del screen.
The computer has joined the domain and has run all other steps but it has failed to install SCCM client. I can also see the leftovers of an incomplete TS under c:\_SMSTaskSequence
If we change the image specified under "Apply Operating System" step, everything works ok.
It appears there is something wrong with this particular image. Any ideas?
Logs show no errors. Let me know which logs you'd like me to post (and from which location)
There is no ccm folder under c:\windows

Hoping you are using ConfigMgr 2012 R2. If a client machine Join to Domain and doesn't proceed with other steps and not installing the CCM client, then problem seems to be with the Image.Do you have any RunOnce registry setting specified in the Image? You
can mount the Image and check those settings.
RunOnce Key Reference :
https://msdn.microsoft.com/en-us/library/windows/desktop/aa376977(v=vs.85).aspx
If the above key is present in the Image, TS Engine won't resume after the reboot.
You need to use a new variable "SMSTSPostAction" at the end of the Task Sequence, to add your custom actions.
The above variable is applicable in CM 2012 SP1 and R2.
Thanks, Senthil. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. Click on "vote as Helpful" if you feel this post helpful to you. This
can be beneficial to other community members reading the thread.

How to install sccm client on bulk collections using push installation

Unfortunately I did something and received the following description:-
How to know/reproduce the following scenario by installing sccm client on bulk collections in SCCM 2012R2?
"User ***** requested that the CCRs will be generated for collection “All Windows Client Systems (P0100015), The SMS Provider did not generate CCRs for all the system resources in this collection.
Possible cause: some system resources are not assigned to the current site, and you chose to insta
Il clients only on system resources that are
assigned to current site.
Another possible cause: Some system resources do not have Microsoft Windows NT operating system
or above installed.
Message ID: 30110"

Ok. Some of your clients are not covered under any site assignment boundary, hence you are getting that error. Would recommend you to select "Install the client from a specified site" and select the Primary site. If your boundary groups for content
are configured fine then the client will be installed from the appropriate site for each machine you are pushing the client to.
-RG

Additional User with admin rights

Hi all,
i checked the documentation but i could not found a possibility to create an additional user with admin rights to access the Vibe Management Console.
Does anybody know if this is possible and how to do this?
Thanks in advance
Alex

Hi Willem,
thank you for the great post. It did the job very well.
Alex
>>> <[email protected]> schrieb am 1.8.2013 um 07:46 AM:
> arlorenz;2275156 Wrote:
>> Hi all,
>>
>> i checked the documentation but i could not found a possibility to
>> create an additional user with admin rights to access the Vibe
>> Management Console.
>> Does anybody know if this is possible and how to do this?
>>
>> Thanks in advance
>>
>> Alex
>
> Hey Alex,
>
> Yes, that's possible. It's somewhat a twofold/threefold process, as
> you have to give an accounts right to administer the zone, and then also
> have to give that account rights to the personal workspace root (to be
> able create/delete user accounts) and any workspaces that need to be
> administered.
>
> I always create an vibe-admins group (local group) that gets the rights
> to the zone and workspace roots. Then add the needed users to that
> group.
>
> Access for the zone can be set within the administration console:
> https://www.novell.com/documentation...ata/bk4saug.ht
> ml
>
> Then add the needed rights on the workspace roots, Global, personal &
> team workspaces.
>
>
> !Do note that admin is the only user that is not allowed to get
> blocked. Other admin users can be filtered out via ACL's.
>
>
> Cheers,
> Willem

User with admin rights can't access files through the command prompt

I have a strange situation where I have 2 users both setup exactly the same with admin rights on a 2003 (32 bit) server through an AD group membership, but one can do everything as expected but the other can't.
The one that can't is trying to execute a program is a command prompt and keeps getting access denied or invalid directory when trying to cd into the folder. I double and tripled check the permissions and they are correct, this person should have
full admin. In fact I did a effective permissions through explorer and it states full rights. Along those lines this person can also access the folder in question through explorer just not a command prompt.
Has anyone seen this before ? and if so what can be done about it.
Thanks

Hi,
Can the user execute the program through explorer? In Windows Server 2003, the Users group does not have Read and Execute permissions to the command processor (Cmd.exe).
You could refer to the article below to resolve the issue:
"Access is denied" error message when you run a batch job on a Windows Server 2003-based computer
http://support.microsoft.com/kb/867466
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem installing SCCM client in remote untrusted forest

Hi,
My configuration is :
My network is in two parts : intranet and a DMZ. In the DMZ there is another forest and domain. There is no trust between the forest in the DMZ and the internal network. I configured the remote forest in SCCM with a user account that has Domain Admin acces
in the DMZ forest/domain.
The primary site server is located in the internal part of my network. SQL is installed on a remote server. Management point, distribution point, Fallback Status Point roles are installed on the primary site server. SMS Provider is installed on the primary
site server.
In the DMZ part, I have a management point, distribution point installed on one server.
The forest discovery works fine. I can query AD in the remote forest (DMZ).
I have a problem installing the SCCM client on computers located in the remote forest with client push or with the command line.
CCMSETUP.EXE /MP:DMZ site server /DP:DMZ site server /FSP: primary site server SMSSITECODE:SIT
In CCMSetup.log I can see that the client try to communicate with my DMZ site server but it reverts to the management point and distribution point located in the internal part of the network. The installation fails and will try in 10 minutes.
Do anyone has seen this problem before? Am I missing something? Could it be a configuration issue?
Could you help me whit this please?
Thanks in advance for your time!
Jacques

Does the client installation work when you install the client manually on the untrusted domain client? What does the CCM.log say on the site server?
Have you double checked the firewall ports for the client push installation? The ports needed for the client push to work are as follows (from the site server to the client):
SMB - TCP 445
RPC Endpoint Mapper - TCP 135 / UDP 135
RPC Dynamic Ports
And to Management Point:
HTTP - TCP 80 (When using HTTP)
HTTPS - TCP 443 (When using HTTPS)
Also a quote from
TechNet: "In addition to the ports listed in the following table, client push installation also uses Internet Control Message Protocol (ICMP) echo request messages from the site server to the client computer to confirm whether the client
computer is available on the network. ICMP is sometimes referred to as TCP/IP ping commands. ICMP does not have a UDP or TCP protocol number, and so it is not listed in the following table. However, any intervening network devices, such as firewalls, must
permit ICMP traffic for client push installation to succeed."

Does UCCX 8.5.1 Historical Reporting Client run only with admin rights?

I installed UCCX 8.5.1 Historical Reporting Client on a Windows Vista machine. When I try to open it as a regular user, it gives me an error message "Unexpected error: Quitting". I can only open it when I log into the machine as administrator. Does anyone know this is the normal behaviour? If so, then every supervisor of my contact center will need to have admin rights in the computer?

hi,
The Historical Reports client uses Windows's secondary logon service. It uses this to run
the software with the CiscoHistRptUsr when the agent or supervisor is logged into the PC
with their own account. This is the service that gives you the Run As option when you
right click on executables. Check to see if they have this ability on the PC, and make
sure the "Secondary Logon" service shows as Started in the Windows services (Run -->
Services.msc)"
So, on one of the PCs with the issue, look for Secondary Login: Start >Settings >
Control Panel > Administrative Tools > Services. Scroll down to Secondary Logon and
verify that this service is started.
Also, if the service is running, please look for the application, right click on it and
select "Run as Administrator"
Hope that helps!
Thanks,
Karthik

Script to install the SCCM client remotely

Hi everyone,
My customer wants me to realize a script that reads
from a computers.txt list containing all the company computers and that do the following steps:
1. Verify that the sccm client is not installed
2. If not present, install remotely the client
3. Verify that the WMI stack is healthy
Any help will be appreciate :-)
Thank you

If you're looking for a startup script Jason Sandys has written the best one
http://blog.configmgrftw.com/configmgr-client-startup-script/
As for reading the computers from a text file, that's ridiculous. You will find that nobody has ever done that. ConfigMgr is designed to manage tens (and hundreds) of thousands of devices in the simplest way possible. Compiling and maintaining a text file
of computer names is high maintenance and quite frankly crazy.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Error 1603 installing SCCM client

When I try to install the SCCM client on some machines I get an installation error 1603. Setup starts ok, but after a while ends in a 1603 error.
ccmsetup.log
MSI: Action 13:45:12: AllocateRegistrySpace. Allocating registry space ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: ProcessComponents. Updating component registration ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: UnpublishComponents. Unpublishing Qualified Components ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: UnpublishFeatures. Unpublishing Product Features ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: SmsTSManagerStopServiceInit. ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: CcmStopService. ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: StopServices. Stopping services ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: SmsStopUIComponents. Stopping UI Components ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
MSI: Action 13:45:12: StopDeleteWUSER32. Stopping and deleting WUSER32 service ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
Installation failed with error code 1603 ccmsetup 14/07/2008 13:45:12 PM 2532 (0x09E4)
There were no previous SMS/SCCM clients installed.
Tried a new install after the rebuild of WMI but without any luck.

Hi John,
The client.msi.log shows this error (same as above):
Action start 23:52:25: StopDeleteWUSER32.
MSI (s) (08:1C) [23:52:26:037]: Machine policy value 'DisableRollback' is 0
MSI (s) (08:1C) [23:52:26:037]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
Action ended 23:52:26: StopDeleteWUSER32. Return value 3.
At the bottom of the ccmsetup.log it ends with this error:
MSI: Action 23:52:25: StopDeleteWUSER32. Stopping and deleting WUSER32 service 8/20/2009 11:52:25 PM
Installation failed with error code 1603 8/20/2009 11:52:26 PM
Next retry in 120 minute(s)... 8/20/2009 11:52:38 PM
I'm having trouble locating a windows installer log. The %temp% folder would be in docs&settings\userid\local settings\temp, I would assume and I've looked through the folders for the acct that is doing the client install as well as all the other acct folders and can't seem to locate any logs with a current date/time stamp. Any idea where I would look?
Also, BTW, I reinstalled MSI 4.5 before I did this last client installation, but I did it remotely/silently, so no prompts or data returned... I just found the errors below in the \windows\KB942288-v3.log file... might be related?
4.140: 2009/08/20 23:44:40.146 (local)
4.140: e:\6c0499dd2b70eebd34aa8b8c33\UPDATE\update.exe (version 6.3.13.0)
4.172: Hotfix started with following command line: /quiet /norestart
4.187: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
8.578: In Function TestVolatileFlag, line 11825, RegOpenKeyEx failed with error 0x2
8.578: In Function TestVolatileFlag, line 11857, RegOpenKeyEx failed with error 0x2
8.578: DoInstallation: CleanPFR failed: 0x2
8.593: In Function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
8.593: SetProductTypes: InfProductBuildType=BuildType.IP
8.593: SetAltOsLoaderPath: No section uses DirId 65701; done.
8.718: DoInstallation: FetchSourceURL for e:\6c0499dd2b70eebd34aa8b8c33\update\update_SP3QFE.inf failed
8.718: CreateUninstall = 0,Directory = C:\WINDOWS\$NtUninstallKB942288-v3$
8.718: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed: 0xe0000102
8.734: BuildCabinetManifest: update.url absent
8.750: Starting AnalyzeComponents
8.750: AnalyzePhaseZero used 0 ticks
8.750: No c:\windows\INF\updtblk.inf file.
8.750: OEM file scan used 0 ticks
10.812: AnalyzePhaseOne: used 2062 ticks
10.812: AnalyzeComponents: Hotpatch analysis disabled; skipping.
10.812: AnalyzeComponents: Hotpatching is disabled.
10.812: FindFirstFile c:\windows\$hf_mig$\*.*
16.500: AnalyzeForBranching used 0 ticks.
16.500: AnalyzePhaseTwo used 0 ticks
16.500: AnalyzePhaseThree used 0 ticks
16.500: AnalyzePhaseFive used 0 ticks
16.515: AnalyzePhaseSix used 15 ticks
16.515: AnalyzeComponents used 7765 ticks
16.515: Downloading 0 files
16.515: bPatchMode = FALSE
16.515: Inventory complete: ReturnStatus=0, 7797 ticks
16.515: Num Ticks for invent : 7797
16.547: VerifyTargetFileSize: Unable to verify size as Source = NULL for file c:\windows\inf\HFX269.tmp
16.578: Copied file: c:\windows\inf\branches.inf
38.625: Allocation size of drive C: is 4096 bytes, free space = 4751011840 bytes
38.625: Drive C: free 4530MB req: 5MB w/uninstall 0MB
38.625: CabinetBuild complete
38.625: Num Ticks for Cabinet build : 22110
38.625: DynamicStrings section not defined or empty.
38.656: FileInUse:: Detection disabled.
38.656: FileInUse:: Add to list - Service Name: msiserver
39.656: LoadFileQueues: UpdSpGetSourceFileLocation for halaacpi.dll failed: 0xe0000102
40.015: Copied file: C:\WINDOWS\system32\spmsg.dll
40.125: PFE2: Not avoiding Per File Exceptions.
41.734: DoInstallation: Installing assemblies with source root path: e:\6c0499dd2b70eebd34aa8b8c33\
41.734: Num Ticks for Copying files : 3109
41.812: Num Ticks for Reg update and deleting 0 size files : 78
41.828: DoInstallation: ApplyAdminSystemAclsRecursive for c:\windows\$hf_mig$\KB942288-v3 failed; error=0x00000003
41.843: UpdateSpUpdSvcInf: Source [ProcessesToRunAfterReboot] section is empty; nothing to do.
43.187: RebootNecessary = 0,WizardInput = 1 , DontReboot = 1, ForceRestart = 0
Thanks again!! --Jo

Install SCCM Client Post Install via MDT 2013

I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000

There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys

Install SCCM client remotely with admin rights

Similar Messages

Maybe you are looking for